scholarly journals Green Communication for Underwater Wireless Sensor Networks: Triangle Metric Based Multi-Layered Routing Protocol

Sensors ◽  
2020 ◽  
Vol 20 (24) ◽  
pp. 7278
Author(s):  
Ahmad M. Khasawneh ◽  
Omprakash Kaiwartya ◽  
Jaime Lloret ◽  
Hayfa Y. Abuaddous ◽  
Laith Abualigah ◽  
...  

In this paper, we propose a non-localization routing protocol for underwater wireless sensor networks (UWSNs), namely, the triangle metric based multi-layered routing protocol (TM2RP). The main idea of the proposed TM2RP is to utilize supernodes along with depth information and residual energy to balance the energy consumption between sensors. Moreover, TM2RP is the first multi-layered and multi-metric pressure routing protocol that considers link quality with residual energy to improve the selection of next forwarding nodes with more reliable and energy-efficient links. The aqua-sim package based on the ns-2 simulator was used to evaluate the performance of the proposed TM2RP. The obtained results were compared to other similar methods such as depth based routing (DBR) and multi-layered routing protocol (MRP). Simulation results showed that the proposed protocol (TM2RP) obtained better outcomes in terms of energy consumption, network lifetime, packet delivery ratio, and end-to-end delay.

For ocean exploration high speed data transmission is the emergent requirement. Acoustic sensor networks are available to support large distances but with lower data rates and also consume maximum energy. Optical networks can be used to support high speed data transmission but it cannot be used for larger distances. Underwater Wireless Sensor Networks (UWSN) suffer from large propagation delay, high bit error rates, limited bandwidth, uncontrolled node mobility, water current and limited resources. Hence there is an evolving requirement for design and use of an efficient routing protocol. In the proposed research, design of an Optimal Distributed Energy Efficient Hybrid Optical - Acoustic Cluster Based Routing Protocol (EEHCRP) to minimize the energy consumption in Underwater Wireless Sensor Networks is considered. To overcome these problems we propose an Energy Efficient Hybrid Optical-Acoustic Cluster Based Routing Protocol for Underwater Wireless Sensor Network (EEHCRP). In this research work we study various network parameters like network throughput, network life time, average energy consumption, end to end delay and data delivery ratio for mobile nodes ranging from 50 to 500. It is observed that there is an average increase of 0.9% network throughput in the proposed EEHRCP protocol compared to CBE2R protocol. The network life time is increased to 51.2 seconds with a decrease in 0.93% of energy consumption and 0.48 % decrease in end to end delay in the proposed protocol EEHRCP compared to CBE2R protocol. There is an increase in 0.95% of data delivery ratio using the proposed EEHRCP protocol compared to E-CBCCP protocol.


Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Jun Wang ◽  
Zhuangzhuang Du ◽  
Zhengkun He ◽  
Xunyang Wang

Balancing energy consumption using the clustering routing algorithms is one of the most practical solutions for prolonging the lifetime of resource-limited wireless sensor networks (WSNs). However, existing protocols cannot adequately minimize and balance the total network energy dissipation due to the additional tasks of data acquisition and transmission of cluster heads. In this paper, a cluster-head rotating election routing protocol is proposed to alleviate the problem. We discovered that the regular hierarchical clustering method and the scheme of cluster-head election area division had positive effects on reducing the energy consumption of cluster head election and intracluster communication. The election criterion composed of location and residual energy factor was proved to lower the probability of premature death of cluster heads. The chain multihop path of intercluster communication was performed to save the energy of data aggregation to the base station. The simulation results showed that the network lifetime can be efficiently extended by regulating the adjustment parameters of the protocol. Compared with LEACH, I-LEACH, EEUC, and DDEEC, the algorithm demonstrated significant performance advantages by using the number of active nodes and residual energy of nodes as the evaluation indicators. On the basis of these results, the proposed routing protocols can be utilized to increase the capability of WSNs against energy constraints.


Author(s):  
Tareq Krishan ◽  
Rami S. Alkhawaldeh ◽  
Saed Khawaldeh ◽  
Bilal Al-Ahmad ◽  
Adnan Al Smadi

Underwater wireless sensor networks (UWSN) have recently been proposed as a way to monitor and explore the water depths' environments. Efficiently delivering the data is still a challenging problem in these networks because of the weaknesses in the acoustic transmission. To tackle such a problem, we propose a novel algorithm provides controlling mechanisms for critical long-term data forwarding underwater sensor networks, called Hop by Hop Power-Efficient Routing Protocol (Hn-PERP). The proposed Hn-PERP is a centralized full-control model that enhances the network's throughput and energy efficiency by a set of solutions depend on power monitoring in UWSN nodes. In particular, the model provides a guaranteed mechanism for scheduling and processing data transmission based on number of nodes, hops between the nodes, energy level and congestion within each node to minimize energy levels or power consumption by avoiding disconnected probability for any node, which in turn maximizing the network lifetime. Simulation results show that our proposed model is consistent with energy level and congestion, and is more accurate for enabling routing and data transmission. Therefore, the data packet delivery ratio and overall throughput also achieves robust scenarios of very sparse or/and weak networks, to keep on Performance stability in UWSN via adjusting hop-by-hop delay and energy consumption during packages delivery.


Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3271 ◽  
Author(s):  
Arshad Sher ◽  
Aasma Khan ◽  
Nadeem Javaid ◽  
Syed Ahmed ◽  
Mohammed Aalsalem ◽  
...  

Due to the limited availability of battery power of the acoustic node, an efficient utilization is desired. Additionally, the aquatic environment is harsh; therefore, the battery cannot be replaced, which leaves the network prone to sudden failures. Thus, an efficient node battery dissipation is required to prolong the network lifespan and optimize the available resources. In this paper, we propose four schemes: Adaptive transmission range in WDFAD-Depth-Based Routing (DBR) (A-DBR), Cluster-based WDFAD-DBR (C-DBR), Backward transmission-based WDFAD-DBR (B-DBR) and Collision Avoidance-based WDFAD-DBR (CA-DBR) for Internet of Things-enabled Underwater Wireless Sensor Networks (IoT, UWSNs). A-DBR adaptively adjusts its transmission range to avoid the void node for forwarding data packets at the sink, while C-DBR minimizes end-to-end delay along with energy consumption by making small clusters of nodes gather data. In continuous transmission range adjustment, energy consumption increases exponentially; thus, in B-DBR, a fall back recovery mechanism is used to find an alternative route to deliver the data packet at the destination node with minimal energy dissipation; whereas, CA-DBR uses a fall back mechanism along with the selection of the potential node that has the minimum number of neighbors to minimize collision on the acoustic channel. Simulation results show that our schemes outperform the baseline solution in terms of average packet delivery ratio, energy tax, end-to-end delay and accumulated propagation distance.


2020 ◽  
Vol 16 (9) ◽  
pp. 155014772095830
Author(s):  
Imran Ullah Khan ◽  
Mazhar Islam ◽  
Muhammad Ismail ◽  
Abdul Baseer Qazi ◽  
Sadeeq Jan ◽  
...  

In the recent past, a significant increase has been observed in the use of underwater wireless sensor networks for aquatic applications. However, underwater wireless sensor networks face several challenges including large propagation delays, high mobility, limited bandwidth, three-dimensional deployments, expensive manufacturing, and energy constraints. It is crucial for underwater wireless sensor networks to mitigate all these limitations primarily caused by the harsh underwater environment. To address some of the pertinent challenges, adaptive hop-by-hop cone vector-based forwarding routing protocol is proposed in this article which is based on the adaptive hop-by-hop vector-based forwarding. The novelty of adaptive hop-by-hop cone vector-based forwarding includes increasing the transmission reliability in sparse sensor regions by changing the base angle of the cone according to the network structure. The number of duplicate packets and end-to-end delay is also reduced because of the reduced base angle and a smart selection criterion for the potential forwarder node. The proposed routing protocol adaptively tunes the height and opening of the cone based on the network structure to effectively improve the performance of the network. Conclusively, this approach significantly reduces energy tax, end-to-end delay, and packet delivery ratio.


2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Fang Zhu ◽  
Junfang Wei

Underwater Wireless Sensor Networks (UWSNs) have drawn tremendous attentions from all fields because of their wide application. Underwater wireless sensor networks are similar to terrestrial Wireless Sensor Networks (WSNs), however, due to different working environment and communication medium, UWSNs have many unique characteristics such as high bit error rate, long end-to-end delay and low bandwidth. These characteristics of UWSNs lead to many problems such as retransmission, high energy consumption and low reliability. To solve these problems, many routing protocols for UWSNs are proposed. In this paper, a localization-free routing protocol, named energy efficient routing protocol based on layers and unequal clusters (EERBLC) is proposed. EERBLC protocol consists of three phases: layer and unequal cluster formation, transmission routing, maintenance and update of clusters. In the first phase, the monitoring area under the water is divided into layers, the nodes in the same layer are clustered. For balancing energy of the whole network and avoiding the “hotspot” problem, a novel unequal clustering method based on layers for UWSNs is proposed, in which a new calculation method of unequal cluster size is presented. Meanwhile, a new cluster head selection mechanism based on energy balance and degree is given. In the transmission phase, EERBLC protocol proposes a novel next forwarder selection method based on the forwarding ratio and the residual energy. In the third phase, Intra and inter cluster updating method is presented. The simulation results show that the EERBLC can effectively balance the energy consumption, prolong the network lifetime, and increase the amount of data transmission compared with DBR and EEDBR protocols.


2013 ◽  
Vol 437 ◽  
pp. 655-658 ◽  
Author(s):  
Zong Lin Li ◽  
Nian Min Yao ◽  
Qin Gao

Underwater wireless sensor networks (UWSNs) have attracted significant research attention recently from both industry and academia. Due to the significantly differences from terrestrial wireless sensor networks, including slow propagation speed, high end-to-end delay, low available bandwidth, variable link quality and energy constraint, designing an efficient routing protocol for the underwater sensor networks is challenging. In this paper we devise a relative distance-based forwarding (RDBF) routing protocol, which always try to send the packets along an optimized path without constructing a communication path previously. To limit the scope of candidate forwarders and find the optimal relay, we utilize a fitness factor to measure and judge the degree of appropriateness for a node to forward the packets.


2018 ◽  
Vol 12 (11) ◽  
pp. 186 ◽  
Author(s):  
Tareq Krishan ◽  
Rami S. Alkhawaldeh ◽  
Saed Khawaldeh ◽  
Bilal Al-Ahmad ◽  
Adnan Al Smadi

Underwater wireless sensor networks (UWSN) have recently been proposed as a way to monitor and explore the water depths’ environments. Efficiently delivering the data is still a challenging problem in these networks because of the weaknesses in the acoustic transmission. To tackle such a problem, we propose a novel algorithm provides controlling mechanisms for critical long-term data forwarding underwater sensor networks, called Hop by Hop Power-Efficient Routing Protocol (Hn-PERP). The proposed Hn-PERP is a centralized full-control model that enhances the network’s throughput and energy efficiency by a set of solutions depend on power monitoring in UWSN nodes. In particular, the model provides a guaranteed mechanism for scheduling and processing data transmission based on number of nodes, hops between the nodes, energy level and congestion within each node to minimize energy levels or power consumption by avoiding disconnected probability for any node, which in turn maximizing the network lifetime. Simulation results show that our proposed model is consistent with energy level and congestion, and is more accurate for enabling routing and data transmission. Therefore, the data packet delivery ratio and overall throughput also achieves robust scenarios of very sparse or/and weak networks, to keep on Performance stability in UWSN via adjusting hop-by-hop delay and energy consumption during packages delivery.


2018 ◽  
Vol 7 (3.16) ◽  
pp. 57
Author(s):  
Anandalatchoumy S ◽  
Sivaradje G

Underwater wireless sensor networks are energy resource constrained due to the scarce battery capacity. Energy efficient routing protocol is highly demanded to be developed for such networks. It is indeed a challenging task to design routing protocol that can achieve energy efficiency due to the dynamic and harsh underwater environment. A dynamic cluster based routing protocol coupled with sink mobility support (DCMMS) is proposed. Two schemes are combined together in the protocol. One is the formation of  clusters and two is the mobile sink management. The cluster formation includes cluster head election process and member           association process. Each cluster member sends the sensed data to the cluster head. Multiple mobile sinks are deployed to gather data directly from cluster heads. Finally, mobile sinks send the collected data after proper aggregation to the static sinks located at the surface. Thus, sink mobility and the dynamic clustering technique together help to balance the load among the nodes thereby       minimizing energy consumption to a significant extent and extending the network life span. Analytical simulations are extensively carried out to attest how the proposed protocol (DCMMS) achieves better performance with minimum energy consumption, less end to end delay and higher packet delivery ratio than its counterpart existing protocol (AA-RP).  


Sign in / Sign up

Export Citation Format

Share Document