scholarly journals JMAC Protocol: A Cross-Layer Multi-Hop Protocol for LoRa

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6893
Author(s):  
Juan José López López Escobar ◽  
Felipe Gil-Castiñeira ◽  
Rebeca P. Díaz Díaz Redondo
Keyword(s):  
Communication Networks ◽  
Smart Cities ◽  
Area Network ◽  
Wireless Communication Networks ◽  
Wide Area Network ◽  
Coverage Area ◽  
Radio Technology ◽  
Long Lifetime ◽  
Good Coverage ◽  
Non Line Of Sight

The emergence of Low-Power Wide-Area Network (LPWAN) technologies allowed the development of revolutionary Internet Of Things (IoT) applications covering large areas with thousands of devices. However, connectivity may be a challenge for non-line-of-sight indoor operation or for areas without good coverage. Technologies such as LoRa and Sigfox allow connectivity for up to 50,000 devices per cell, several devices that may be exceeded in many scenarios. To deal with these problems, this paper introduces a new multi-hop protocol, called JMAC, designed for improving long range wireless communication networks that may support monitoring in scenarios such smart cities or Industry 4.0. JMAC uses the LoRa radio technology to keep low consumption and extend coverage area, and exploits the potential mesh behaviour of wireless networks to improve coverage and increase the number of supported devices per cell. JMAC is based on predictive wake-up to reach long lifetime on sensor devices. Our proposal was validated using the OMNeT++ simulator to analyze how it performs under different conditions with promising results.

scholarly journals LoRaWAN Mesh Networks: A Review and Classification of Multihop Communication

Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4273
Author(s):  
Jeferson Rodrigues Cotrim ◽  
João Henrique Kleinschmidt
Keyword(s):  
Large Scale ◽  
Simulation Analysis ◽  
Mesh Networks ◽  
Smart Cities ◽  
Low Cost ◽  
Wide Area ◽  
Area Network ◽  
Full Potential ◽  
Wide Area Network ◽  
Coverage Area

The growth of the Internet of Things (IoT) led to the deployment of many applications that use wireless networks, like smart cities and smart agriculture. Low Power Wide Area Networks (LPWANs) meet many requirements of IoT, such as energy efficiency, low cost, large coverage area, and large-scale deployment. Long Range Wide Area Network (LoRaWAN) networks are one of the most studied and implemented LPWAN technologies, due to the facility to build private networks with an open standard. Typical LoRaWAN networks are single-hop in a star topology, composed of end-devices that transmit data directly to gateways. Recently, several studies proposed multihop LoRaWAN networks, thus forming wireless mesh networks. This article provides a review of the state-of-the-art multihop proposals for LoRaWAN. In addition, we carried out a comparative analysis and classification, considering technical characteristics, intermediate devices function, and network topologies. This paper also discusses open issues and future directions to realize the full potential of multihop networking. We hope to encourage other researchers to work on improving the performance of LoRaWAN mesh networks, with more theoretical and simulation analysis, as well as practical deployments.

scholarly journals Cityscape LoRa Signal Propagation Predicted and Tested Using Real-World Building-Data Based O-FDTD Simulations and Experimental Characterization

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2717
Author(s):  
Ricardo M. R. Adão ◽  
Eduardo Balvís ◽  
Alicia V. Carpentier ◽  
Humberto Michinel ◽  
Jana B. Nieder
Keyword(s):  
Communication Networks ◽  
Real World ◽  
Smart Cities ◽  
Low Cost ◽  
Fdtd Method ◽  
Signal Propagation ◽  
Wireless Communication Networks ◽  
Coverage Area ◽  
Concrete Walls ◽  
Signal Coverage

The age of the Internet of Things (IoT) and smart cities calls for low-power wireless communication networks, for which the Long-Range (LoRa) is a rising star. Efficient network engineering requires the accurate prediction of the Received Signal Strength Indicator (RSSI) spatial distribution. However, the most commonly used models either lack the physical accurateness, resolution, or versatility for cityscape real-world building distribution-based RSSI predictions. For this purpose, we apply the 2D electric field wave-propagation Oscillator Finite-Difference Time-Domain (O-FDTD) method, using the complex dielectric permittivity to model reflection and absorption effects by concrete walls and the receiver sensitivity as the threshold to obtain a simulated coverage area in a 600 × 600 m2 square. Further, we report a simple and low-cost method to experimentally determine the signal coverage area based on mapping communication response-time delays. The simulations show a strong building influence on the RSSI, compared against the Free-Space Path (FSPL) model. We obtain a spatial overlap of 84% between the O-FDTD simulated and experimental signal coverage maps. Our proof-of-concept approach is thoroughly discussed compared to previous works, outlining error sources and possible future improvements. O-FDTD is demonstrated to be most promising for both indoors and outdoors applications and presents a powerful tool for IoT and smart city planners.

scholarly journals Exploratory approach for network behavior clustering in LoRaWAN

2021 ◽  
Author(s):  
Domenico Garlisi ◽  
Alessio Martino ◽  
Jad Zouwayhed ◽  
Reza Pourrahim ◽  
Francesca Cuomo
Keyword(s):  
Smart Cities ◽  
Wide Area ◽  
Area Network ◽  
Network Behavior ◽  
Wide Area Network ◽  
Network Efficiency ◽  
Exploratory Approach ◽  
Wireless Interface ◽  
Iot Devices ◽  
Set Up

AbstractThe interest in the Internet of Things (IoT) is increasing both as for research and market perspectives. Worldwide, we are witnessing the deployment of several IoT networks for different applications, spanning from home automation to smart cities. The majority of these IoT deployments were quickly set up with the aim of providing connectivity without deeply engineering the infrastructure to optimize the network efficiency and scalability. The interest is now moving towards the analysis of the behavior of such systems in order to characterize and improve their functionality. In these IoT systems, many data related to device and human interactions are stored in databases, as well as IoT information related to the network level (wireless or wired) is gathered by the network operators. In this paper, we provide a systematic approach to process network data gathered from a wide area IoT wireless platform based on LoRaWAN (Long Range Wide Area Network). Our study can be used for profiling IoT devices, in order to group them according to their characteristics, as well as detecting network anomalies. Specifically, we use the k-means algorithm to group LoRaWAN packets according to their radio and network behavior. We tested our approach on a real LoRaWAN network where the entire captured traffic is stored in a proprietary database. Quite important is the fact that LoRaWAN captures, via the wireless interface, packets of multiple operators. Indeed our analysis was performed on 997, 183 packets with 2169 devices involved and only a subset of them were known by the considered operator, meaning that an operator cannot control the whole behavior of the system but on the contrary has to observe it. We were able to analyze clusters’ contents, revealing results both in line with the current network behavior and alerts on malfunctioning devices, remarking the reliability of the proposed approach.

scholarly journals A Long-range Context-aware Platform Design For Rural Monitoring With IoT In Precision Agriculture

2020 ◽  
Vol 15 (2) ◽  
Author(s):  
Deniz TAŞKIN ◽  
Selçuk YAZAR
Keyword(s):  
Long Range ◽  
Precision Agriculture ◽  
Rural Areas ◽  
Smart Cities ◽  
Soil Surface ◽  
Area Network ◽  
Context Aware ◽  
Wide Area Network ◽  
Performance Measurements ◽  
Iot Applications

The Internet of Things (IoT) applications has been developing greatly in recent years to solve communication problems, especially in rural areas. Within the IoT, the context-awareness paradigm, especially in precision agricultural practices, has come to a state of the planning of production time. As smart cities approach, the smart environment approach also increases its place in IoT applications and has dominated research in recent years in literature. In this study, soil and environmental information were collected in 17 km diameter in rural area with developed Long Range (LoRa) based context-aware platform. With the developed sensor and actuator control unit, soil moisture at 5 cm and 30 cm depth and soil surface temperature information were collected and the communication performance was investigated. During the study, the performance measurements of the developed Serial Peripheral Interface (SPI) enabled Long Range Wide Area Network (LoRaWAN) gateway were also performed.

scholarly journals Eco-Efficient Mobility in Smart City Scenarios

2020 ◽  
Vol 12 (20) ◽  
pp. 8443
Author(s):  
Ramon Sanchez-Iborra ◽  
Luis Bernal-Escobedo ◽  
José Santa
Keyword(s):  
Intelligent Transportation Systems ◽  
Smart City ◽  
Smart Cities ◽  
Low Cost ◽  
Transportation Systems ◽  
Area Network ◽  
Wide Area Network ◽  
Fully Integrated ◽  
Personal Mobility ◽  
Traffic Efficiency

Cooperative-Intelligent Transportation Systems (C-ITS) have brought a technological revolution, especially for ground vehicles, in terms of road safety, traffic efficiency, as well as in the experience of drivers and passengers. So far, these advances have been focused on traditional transportation means, leaving aside the new generation of personal vehicles that are nowadays flooding our streets. Together with bicycles and motorcycles, personal mobility devices such as segways or electric scooters are firm sustainable alternatives that represent the future to achieve eco-friendly personal mobility in urban settings. In a near future, smart cities will become hyper-connected spaces where these vehicles should be integrated within the underlying C-ITS ecosystem. In this paper, we provide a wide overview of the opportunities and challenges related to this necessary integration as well as the communication solutions that are already in the market to provide these moving devices with low-cost and efficient connectivity. We also present an On-Board Unit (OBU) prototype with different communication options based on the Low Power Wide Area Network (LPWAN) paradigm and several sensors to gather environmental information to facilitate eco-efficiency services. As the attained results suggest, this module allows personal vehicles to be fully integrated in smart city environments, presenting the possibilities of LoRaWAN and Narrow Band-Internet of Things (NB-IoT) communication technologies to provide vehicle connectivity and enable mobile urban sensing.

scholarly journals Evaluation of the Use of Class B LoRaWAN for the Coordination of Distributed Interface Protection Systems in Smart Grids

2020 ◽  
Vol 9 (1) ◽  
pp. 13 ◽  
Author(s):  
Marco Pasetti ◽  
Emiliano Sisinni ◽  
Paolo Ferrari ◽  
Stefano Rinaldi ◽  
Alessandro Depari ◽  
...  
Keyword(s):  
Response Time ◽  
Communication Networks ◽  
Smart Grids ◽  
Distribution Networks ◽  
Maximum Response ◽  
Area Network ◽  
Wide Area Network ◽  
Protection Systems ◽  
Class B ◽  
Maximum Response Time

The adoption of the distributed generation paradigm is introducing several changes in the design and operation of modern distribution networks. Modern grid codes are becoming more and more complex, and the adoption of smart protection systems is becoming mandatory. However, the adoption of newer and smarter units is only half of the story. Proper communication networks must be provided as well, and the overall costs may become critical. In this work, the adoption of the Long-Range Wide Area Network (LoRaWAN) technology is suggested as a viable approach to implement the coordination of Interface Protection Systems. A proper communication architecture based on the LoRaWAN Class B technology was proposed and evaluated in order to assess its feasibility for the considered application. A scalability analysis was carried out, by computing the number of devices that can be handled by a single LoRaWAN Gateway (GW) and the maximum expected time of response between a triggering event and the arrival of the related coordination command. The results of the study showed that up to 312 devices can be managed by a single GW, by assuring a maximum response time of 22.95 s. A faster maximum response time of 6.2 s is also possible by reducing the number of managed devices to 12.

scholarly journals Analysis of Bidirectional ADR-Enabled Class B LoRaWAN Networks in Industrial Scenarios

2020 ◽  
Vol 10 (22) ◽  
pp. 7964
Author(s):  
David Todoli-Ferrandis ◽  
Javier Silvestre-Blanes ◽  
Víctor Sempere-Payá ◽  
Ana Planes-Martínez
Keyword(s):  
Energy Consumption ◽  
Low Power ◽  
Packet Loss ◽  
Industry 4.0 ◽  
Smart Cities ◽  
Data Rate ◽  
Wide Area ◽  
Area Network ◽  
Wide Area Network ◽  
Class B

Low-power wide-area network (LPWAN) technologies are becoming a widespread solution for wireless deployments in many applications, such as smart cities or Industry 4.0. However, there are still challenges to be addressed, such as energy consumption and robustness. To characterize and optimize these types of networks, the authors have developed an optimized use of the adaptative data rate (ADR) mechanism for uplink, proposed its use also for downlink based on the simulator ns-3, and then defined an industrial scenario to test and validate the proposed solution in terms of packet loss and energy.

scholarly journals Smart Public Lighting Control and Measurement System Using LoRa Network

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 124 ◽  
Author(s):  
F. Sánchez Sutil ◽  
Antonio Cano-Ortega
Keyword(s):  
Energy Efficiency ◽  
Long Range ◽  
Smart Cities ◽  
Low Cost ◽  
Dynamic Control ◽  
Easy Access ◽  
Area Network ◽  
Wide Area Network ◽  
Smart Meters ◽  
High Resolution Data

The installation of smart meters in smart cities to monitor streetlights (SLs) provides easy access to measurements of electrical variables and lighting levels, which improves the operation of installation. The use of smart meters in cities requires temporary high-resolution data to improve the energy efficiency (EE) of SLs. Long range (LoRa) is an ideal wireless protocol for use in smart cities due to its low energy consumption, secure communications, and long range indoors and outdoors. For this purpose, we developed a low-cost new system and successfully evaluated it by developing three devices, namely the measure and control device for street lights (MCDSL), lighting level measurement device (LLMD) and gateway LoRa network (GWLN), based on the Arduino open-source electronic platform. This paper describes the hardware and software design and its implementation. Further, an algorithm has been developed to enhance the energy efficiency of public lights using MCDSL, the energy efficiency for street lights (EESL) algorithm, that use the illumination level measured on the same set of SLs with a dynamic control, which assumed different lighting levels throughout the night, and adjusted luminous flux based on the traffic intensity of pedestrians. It sends the acquired data through the LoRa low-power wide-area-network (LPWAN) to the cloud.

scholarly journals On the Use of LoRaWAN for Mobile Internet of Things: The Impact of Mobility

2021 ◽  
Vol 5 (1) ◽  
pp. 5
Author(s):  
Mohammad Al mojamed
Keyword(s):  
Internet Of Things ◽  
Long Range ◽  
Mobile Internet ◽  
Traffic Load ◽  
Area Network ◽  
Wide Area Network ◽  
Model Combination ◽  
Coverage Area ◽  
Iot Applications ◽  
The Impact

A long-range wide-area network (LoRaWAN) targets both mobile and static Internet of Things (IoT) applications; it is suited to IoT applications, which require a large coverage area while consuming less power at a low data rate; it provides a solution for transferring data between IoT devices with a minimum cost in terms of power, at the expense of higher latency. LoRaWAN was designed for static low-power long-range networks. However, several IoT solution applications involve the use of mobility. Therefore, this study investigates the usage of LoRaWAN in the field of mobile Internet of Things applications such as bike rentals, fleet monitoring, and wildlife and animal tracking applications. Using the OMNeT++ simulator, two different well-known mobility models are used to investigate the influence of mobility on the performance of mobile LoRaWAN. The results show that intense LoRaWAN networks can operate under a high velocity and varying traffic load. It can be observed that the random waypoint model combination yields a better performance, but at the cost of higher collisions and energy consumption. As a consequence, the results suggest the reconsideration of mobile IoT solutions over LoRaWAN.

Review of key management techniques for advanced metering infrastructure

2021 ◽  
Vol 17 (8) ◽  
pp. 155014772110415
Author(s):  
Otisitswe Kebotogetse ◽  
Ravi Samikannu ◽  
Abid Yahya
Keyword(s):  
Smart Grid ◽  
Communication Networks ◽  
Key Management ◽  
Power Grid ◽  
Cyber Attacks ◽  
Area Network ◽  
Advanced Metering Infrastructure ◽  
Wide Area Network ◽  
Security Issues ◽  
Advanced Metering

The electricity industry has been developed through the introduction of the smart grid. This has brought about two-way communication to the grid and its components. The smart grid has managed to increase the efficiency and reliability of the traditional power grid over the years. A smart grid has a system that is used to measure and collect readings for power consumption reflection, and the system is known as the Advanced Metering Infrastructure. The advanced metering infrastructure has its components too which are the smart metre, metre control system, collector or concentrator and communication networks (wide area network, neighbourhood area network, and home area network). The communication networks in the advanced metering infrastructure have created a vulnerability to cyber-attacks over the years. The reliability of the power grid to consumers relies on the readings from the smart metre, and this brings about the need to secure the smart metre data. This article presents a review of key management methods in advanced metering infrastructure environments. The article begins with an overview of advanced metering infrastructure and then shows the relationship between the advanced metering infrastructure and the smart grid. The review then provides the security issues related to advanced metering infrastructure. Finally, the article provides existing works of key management methods in advanced metering infrastructure and future directions in securing advanced metering infrastructure and the smart grid.

Sign in / Sign up

Export Citation Format

Share Document