scholarly journals A Review of Inkjet Printed Graphene and Carbon Nanotubes Based Gas Sensors

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5642 ◽  
Author(s):  
Twinkle Pandhi ◽  
Ashita Chandnani ◽  
Harish Subbaraman ◽  
David Estrada
Keyword(s):  
Flexible Electronics ◽  
Inkjet Printing ◽  
Gas Sensing ◽  
Ambient Conditions ◽  
Sensing Applications ◽  
Recent Developments ◽  
Vapor Sensors ◽  
Multiwall Nanotubes ◽  
Modified Graphene ◽  
Single Wall Nanotubes

Graphene and carbon nanotube (CNT)-based gas/vapor sensors have gained much traction for numerous applications over the last decade due to their excellent sensing performance at ambient conditions. Inkjet printing various forms of graphene (reduced graphene oxide or modified graphene) and CNT (single-wall nanotubes (SWNTs) or multiwall nanotubes (MWNTs)) nanomaterials allows fabrication onto flexible substrates which enable gas sensing applications in flexible electronics. This review focuses on their recent developments and provides an overview of the state-of-the-art in inkjet printing of graphene and CNT based sensors targeting gases, such as NO2, Cl2, CO2, NH3, and organic vapors. Moreover, this review presents the current enhancements and challenges of printing CNT and graphene-based gas/vapor sensors, the role of defects, and advanced printing techniques using these nanomaterials, while highlighting challenges in reliability and reproducibility. The future potential and outlook of this rapidly growing research are analyzed as well.

scholarly journals 2D Materials for Gas Sensing Applications: A Review on Graphene Oxide, MoS2, WS2 and Phosphorene

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3638 ◽  
Author(s):  
Maurizio Donarelli ◽  
Luca Ottaviano
Keyword(s):  
Graphene Oxide ◽  
Gas Sensing ◽  
2D Materials ◽  
High Surface ◽  
Volume Ratio ◽  
Thick Layer ◽  
Research Field ◽  
First Year ◽  
Sensing Applications ◽  
Recent Developments

After the synthesis of graphene, in the first year of this century, a wide research field on two-dimensional materials opens. 2D materials are characterized by an intrinsic high surface to volume ratio, due to their heights of few atoms, and, differently from graphene, which is a semimetal with zero or near zero bandgap, they usually have a semiconductive nature. These two characteristics make them promising candidate for a new generation of gas sensing devices. Graphene oxide, being an intermediate product of graphene fabrication, has been the first graphene-like material studied and used to detect target gases, followed by MoS2, in the first years of 2010s. Along with MoS2, which is now experiencing a new birth, after its use as a lubricant, other sulfides and selenides (like WS2, WSe2, MoSe2, etc.) have been used for the fabrication of nanoelectronic devices and for gas sensing applications. All these materials show a bandgap, tunable with the number of layers. On the other hand, 2D materials constituted by one atomic species have been synthetized, like phosphorene (one layer of black phosphorous), germanene (one atom thick layer of germanium) and silicone (one atom thick layer of silicon). In this paper, a comprehensive review of 2D materials-based gas sensor is reported, mainly focused on the recent developments of graphene oxide, exfoliated MoS2 and WS2 and phosphorene, for gas detection applications. We will report on their use as sensitive materials for conductometric, capacitive and optical gas sensors, the state of the art and future perspectives.

scholarly journals Inkjet-Printing Polymer Nanocomposite for Detecting VOCs

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 882 ◽  
Author(s):  
Mohammad Madhi Kiaee ◽  
Thomas Maeder ◽  
Juergen Brugger
Keyword(s):  
Inkjet Printing ◽  
Gas Sensing ◽  
Polymer Nanocomposite ◽  
Solvent System ◽  
Solvent Mixture ◽  
Deionized Water ◽  
Polymer Content ◽  
Sensing Applications ◽  
Sensor Platform ◽  
High Structure

Polymer nanocomposite (PNC) inks containing polyvinylpyrrolidone with a molecular weight of 40 kDa (PVP40) and a high structure carbon black (CB) were formulated for gas sensing applications. The formulation was optimized for inkjet printing by using a co-solvent system and tuning the ink’s viscosity. The Ink loaded with 10 wt.% PVP40, dissolved in a solvent mixture containing 70 wt.% deionized water and 30 wt.% gamma-butyrolactone showed an excellent printability. Adding up to 13 wt.% CB particles to the ink, with respect to polymer content, did not affect its printability. Printing PNC onto the sensor platform and measuring its response towards ethanol, acetone and humidity showed the higher affinity of the PNC to humidity and ethanol.

A review on mechanisms and recent developments in p-n heterojunctions of 2D materials for gas sensing applications

2021 ◽  
Vol 56 (16) ◽  
pp. 9575-9604
Author(s):  
Minu Mathew ◽  
Pratik V. Shinde ◽  
Rutuparna Samal ◽  
Chandra Sekhar Rout
Keyword(s):  
Gas Sensing ◽  
2D Materials ◽  
Sensing Applications ◽  
Recent Developments

scholarly journals A Review of Photothermal Detection Techniques for Gas Sensing Applications

2019 ◽  
Vol 9 (14) ◽  
pp. 2826 ◽  
Author(s):  
Krzempek
Keyword(s):  
Refractive Index ◽  
Radiation Source ◽  
Gas Sensing ◽  
Thermal Response ◽  
Photothermal Spectroscopy ◽  
Detection Techniques ◽  
Sensing Applications ◽  
Recent Developments ◽  
Unique Method ◽  
Interesting Alternative

Photothermal spectroscopy (PTS) is a technique used for determining the composition of liquids, solids and gases. In PTS, the sample is illuminated with a radiation source, and the thermal response of the analyte (e.g., refractive index) is analyzed to gain information about its content. Recent advances in this unique method of detecting gaseous samples show that photothermal gas spectroscopy can be an interesting alternative to commonly used absorption techniques. Moreover, if designed properly, sensors using PTS detection technique can not only reach sensitivities comparable with other, more complex techniques, but can significantly simplify the design of the sensor. In this review, recent developments in photothermal spectroscopy of gases will be summarized and discussed.

Recent developments in 2D layered inorganic nanomaterials for sensing

Nanoscale ◽  
2015 ◽  
Vol 7 (32) ◽  
pp. 13293-13312 ◽  
Author(s):  
Padmanathan Karthick Kannan ◽  
Dattatray J. Late ◽  
Hywel Morgan ◽  
Chandra Sekhar Rout
Keyword(s):  
Gas Sensing ◽  
2D Materials ◽  
Electrochemical Sensing ◽  
Comprehensive Overview ◽  
Sensing Applications ◽  
Recent Developments ◽  
Inorganic Nanomaterials ◽  
Salient Features

A comprehensive overview on the recent developments in the application of 2D layered inorganic nanomaterials as sensors is presented. Salient features of 2D materials in different sensing applicationsviz.gas sensing, electrochemical sensing, SERS and biosensing and photodetection are discussed.

Schottky diodes based on 2D materials for environmental gas monitoring: a review on emerging trends, recent developments and future perspectives

2021 ◽  
Author(s):  
Minu Mathew ◽  
Chandra Sekhar Rout
Keyword(s):  
Gas Sensing ◽  
2D Materials ◽  
Schottky Diodes ◽  
High Sensitivity ◽  
Future Perspectives ◽  
Working Temperature ◽  
Emerging Trends ◽  
Gas Sensing Properties ◽  
Recent Developments ◽  
Sensitivity And Selectivity

This review details the fundamentals, working principles and recent developments of Schottky junctions based on 2D materials to emphasize their improved gas sensing properties including low working temperature, high sensitivity, and selectivity.

Fabrication of 3D Temperature Sensor Using Magnetostrictive Inkjet Printhead

2020 ◽  
Vol 64 (5) ◽  
pp. 50405-1-50405-5
Author(s):  
Young-Woo Park ◽  
Myounggyu Noh
Keyword(s):  
Flexible Electronics ◽  
Inkjet Printing ◽  
Temperature Sensor ◽  
Computer Aided Design ◽  
Low Cost ◽  
Three Dimensional ◽  
Drop On Demand ◽  
Aided Design ◽  
Nanoparticle Ink ◽  
Inkjet Printhead

Abstract Recently, the three-dimensional (3D) printing technique has attracted much attention for creating objects of arbitrary shape and manufacturing. For the first time, in this work, we present the fabrication of an inkjet printed low-cost 3D temperature sensor on a 3D-shaped thermoplastic substrate suitable for packaging, flexible electronics, and other printed applications. The design, fabrication, and testing of a 3D printed temperature sensor are presented. The sensor pattern is designed using a computer-aided design program and fabricated by drop-on-demand inkjet printing using a magnetostrictive inkjet printhead at room temperature. The sensor pattern is printed using commercially available conductive silver nanoparticle ink. A moving speed of 90 mm/min is chosen to print the sensor pattern. The inkjet printed temperature sensor is demonstrated, and it is characterized by good electrical properties, exhibiting good sensitivity and linearity. The results indicate that 3D inkjet printing technology may have great potential for applications in sensor fabrication.

Effect of Grain Size on Strain in a Copper Oxide Nanofilm for Gas Sensing Applications

2019 ◽  
Vol 11 (5) ◽  
pp. 05040-1-05040-4
Author(s):  
Sumanta Kumar Tripathy ◽  
◽  
Sanjay Kumar ◽  
Divya Aparna Narava ◽  
◽  
...  
Keyword(s):  
Grain Size ◽  
Copper Oxide ◽  
Gas Sensing ◽  
Sensing Applications

scholarly journals Optimization of a Low-Power Chemoresistive Gas Sensor: Predictive Thermal Modelling and Mechanical Failure Analysis

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 783 ◽  
Author(s):  
Andrea Gaiardo ◽  
David Novel ◽  
Elia Scattolo ◽  
Michele Crivellari ◽  
Antonino Picciotto ◽  
...  
Keyword(s):  
Low Power ◽  
Failure Analysis ◽  
Gas Sensors ◽  
High Performance ◽  
Gas Sensing ◽  
Mechanical Failure ◽  
Sensing Applications ◽  
Theoretical Approaches ◽  
Sensing Material ◽  
Silicon Bulk

The substrate plays a key role in chemoresistive gas sensors. It acts as mechanical support for the sensing material, hosts the heating element and, also, aids the sensing material in signal transduction. In recent years, a significant improvement in the substrate production process has been achieved, thanks to the advances in micro- and nanofabrication for micro-electro-mechanical system (MEMS) technologies. In addition, the use of innovative materials and smaller low-power consumption silicon microheaters led to the development of high-performance gas sensors. Various heater layouts were investigated to optimize the temperature distribution on the membrane, and a suspended membrane configuration was exploited to avoid heat loss by conduction through the silicon bulk. However, there is a lack of comprehensive studies focused on predictive models for the optimization of the thermal and mechanical properties of a microheater. In this work, three microheater layouts in three membrane sizes were developed using the microfabrication process. The performance of these devices was evaluated to predict their thermal and mechanical behaviors by using both experimental and theoretical approaches. Finally, a statistical method was employed to cross-correlate the thermal predictive model and the mechanical failure analysis, aiming at microheater design optimization for gas-sensing applications.

Sign in / Sign up

Export Citation Format

Share Document