scholarly journals Robust and Efficient Indoor Localization Using Sparse Semantic Information from a Spherical Camera

Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4128 ◽  
Author(s):  
Irem Uygur ◽  
Renato Miyagusuku ◽  
Sarthak Pathak ◽  
Alessandro Moro ◽  
Atsushi Yamashita ◽  
...  
Keyword(s):  
Inertial Measurement Unit ◽  
Semantic Information ◽  
Indoor Localization ◽  
Low Cost ◽  
Large Data ◽  
Point Clouds ◽  
Measurement Unit ◽  
Sensor Model ◽  
Localization Approach ◽  
Spherical Camera

Self-localization enables a system to navigate and interact with its environment. In this study, we propose a novel sparse semantic self-localization approach for robust and efficient indoor localization. “Sparse semantic” refers to the detection of sparsely distributed objects such as doors and windows. We use sparse semantic information to self-localize on a human-readable 2D annotated map in the sensor model. Thus, compared to previous works using point clouds or other dense and large data structures, our work uses a small amount of sparse semantic information, which efficiently reduces uncertainty in real-time localization. Unlike complex 3D constructions, the annotated map required by our method can be easily prepared by marking the approximate centers of the annotated objects on a 2D map. Our approach is robust to the partial obstruction of views and geometrical errors on the map. The localization is performed using low-cost lightweight sensors, an inertial measurement unit and a spherical camera. We conducted experiments to show the feasibility and robustness of our approach.

scholarly journals Stereo Visual Odometry for Indoor Localization of Ship Model

2020 ◽  
Vol 58 (1) ◽  
pp. 57-75
Author(s):  
Mario Kučić ◽  
Marko Valčić
Keyword(s):  
Autonomous Navigation ◽  
Inertial Measurement Unit ◽  
Indoor Localization ◽  
Low Cost ◽  
Visual Odometry ◽  
Measurement Unit ◽  
Ship Model ◽  
Open Sea ◽  
Autonomous Cars ◽  
Stereo Cameras

Typically, ships are designed for open sea navigation and thus research of autonomous ships is mostly done for that particular area. This paper explores the possibility of using low-cost sensors for localization inside the small navigation area. The localization system is based on the technology used for developing autonomous cars. The main part of the system is visual odometry using stereo cameras fused with Inertial Measurement Unit (IMU) data coupled with Kalman and particle filters to get decimetre level accuracy inside a basin for different surface conditions. The visual odometry uses cropped frames for stereo cameras and Good features to track algorithm for extracting features to get depths for each feature that is used for estimation of ship model movement. Experimental results showed that the proposed system could localize itself within a decimetre accuracy implying that there is a real possibility for ships in using visual odometry for autonomous navigation on narrow waterways, which can have a significant impact on future transportation.

scholarly journals Multi-Ray Modeling of Ultrasonic Sensors and Application for Micro-UAV Localization in Indoor Environments

Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1770 ◽  
Author(s):  
Lingyu Yang ◽  
Xiaoke Feng ◽  
Jing Zhang ◽  
Xiangqian Shu
Keyword(s):  
Indoor Localization ◽  
Measurement Unit ◽  
Indoor Environments ◽  
Ultrasonic Sensors ◽  
Sensor Model ◽  
Air Vehicle ◽  
Measurement Function ◽  
Simulation And Experiment ◽  
Localization Performance ◽  
Localization Approach

Due to its payload, size and computational limits, localizing a micro air vehicle (MAV) using only its onboard sensors in an indoor environment is a challenging problem in practice. This paper introduces an indoor localization approach that relies on only the inertial measurement unit (IMU) and four ultrasonic sensors. Specifically, a novel multi-ray ultrasonic sensor model is proposed to provide a rapid and accurate approximation of the complex beam pattern of the ultrasonic sensors. A fast algorithm for calculating the Jacobian matrix of the measurement function is presented, and then an extended Kalman filter (EKF) is used to fuse the information from the ultrasonic sensors and the IMU. A test based on a MaxSonar MB1222 sensor demonstrates the accuracy of the model, and a simulation and experiment based on the T h a l e s I I MAV platform are conducted. The results indicate good localization performance and robustness against measurement noises.

scholarly journals 3D MOBILE MAPPING WITH A LOW COST UAV SYSTEM

2017 ◽  
Vol XLII-2/W8 ◽  
pp. 127-132 ◽  
Author(s):  
J. Li ◽  
B. Yang ◽  
W. Wu ◽  
W. Dai ◽  
C. Chen ◽  
...  
Keyword(s):  
Inertial Measurement Unit ◽  
Integration Method ◽  
Low Cost ◽  
Point Clouds ◽  
Bundle Adjustment ◽  
Measurement Unit ◽  
Mobile Mapping ◽  
Multiple Sensors ◽  
Area Of Interest ◽  
Extrinsic Parameters

In order to accomplish the automatic mobile mapping task in a small area of interest, a low cost UAV system is proposed in this paper. Multiple sensors including a global shutter camera and an inertial measurement unit are calibrated and synchronized to collect data from the area of interest. First the images are matched by the chronological order and the SfM is utilized. Then the origin SfM result is integrated with the IMU data by adding the IMU constraints into the bundle adjustment. At last the photogrammetry point clouds are generated using PMVS according to the extrinsic parameters. Experiments are undertaken in a typical scene with photogrammetry point clouds generated. The trajectory estimated by the proposed integration method are compared with the method that relies on image only, showing that the proposed method has better performance.

Accurate 3D Localization Using RGB-TOF Camera and IMU for Industrial Mobile Robots

Robotica ◽  
2021 ◽  
pp. 1-18
Author(s):  
Majid Yekkehfallah ◽  
Ming Yang ◽  
Zhiao Cai ◽  
Liang Li ◽  
Chuanxiang Wang
Keyword(s):  
Mobile Robots ◽  
Inertial Measurement Unit ◽  
Indoor Environment ◽  
State Of The Art ◽  
Low Cost ◽  
Estimation Algorithm ◽  
Measurement Unit ◽  
3D Localization ◽  
Fast Motion ◽  
Tof Camera

SUMMARY Localization based on visual natural landmarks is one of the state-of-the-art localization methods for automated vehicles that is, however, limited in fast motion and low-texture environments, which can lead to failure. This paper proposes an approach to solve these limitations with an extended Kalman filter (EKF) based on a state estimation algorithm that fuses information from a low-cost MEMS Inertial Measurement Unit and a Time-of-Flight camera. We demonstrate our results in an indoor environment. We show that the proposed approach does not require any global reflective landmark for localization and is fast, accurate, and easy to use with mobile robots.

Maximum Correntropy Kalman Filter for Orientation Estimation With Application to LiDAR Inertial Odometry

2020 ◽  
Author(s):  
Seyed Fakoorian ◽  
Matteo Palieri ◽  
Angel Santamaria-Navarro ◽  
Cataldo Guaragnella ◽  
Dan Simon ◽  
...  
Keyword(s):  
Kalman Filtering ◽  
Inertial Measurement Unit ◽  
Low Cost ◽  
Attitude Estimation ◽  
High Rate ◽  
Measurement Unit ◽  
Orientation Estimation ◽  
Localization Accuracy ◽  
Inertial Measurement ◽  
Robotic Applications

Abstract Accurate attitude estimation using low-cost sensors is an important capability to enable many robotic applications. In this paper, we present a method based on the concept of correntropy in Kalman filtering to estimate the 3D orientation of a rigid body using a low-cost inertial measurement unit (IMU). We then leverage the proposed attitude estimation framework to develop a LiDAR-Intertial Odometry (LIO) demonstrating improved localization accuracy with respect to traditional methods. This is of particular importance when the robot undergoes high-rate motions that typically exacerbate the issues associated with low-cost sensors. The proposed orientation estimation approach is first validated using the data coming from a low-cost IMU sensor. We further demonstrate the performance of the proposed LIO solution in a simulated robotic cave exploration scenario.

scholarly journals Rigorous Boresight Self-Calibration of Mobile and UAV LiDAR Scanning Systems by Strip Adjustment

2019 ◽  
Vol 11 (4) ◽  
pp. 442 ◽  
Author(s):  
Zhen Li ◽  
Junxiang Tan ◽  
Hua Liu
Keyword(s):  
Inertial Measurement Unit ◽  
Point Clouds ◽  
Calibration Method ◽  
Satellite System ◽  
Measurement Unit ◽  
Inertial Measurement ◽  
Self Calibration ◽  
Global Navigation Satellite ◽  
Mean Square Errors ◽  
Scanning Systems

Mobile LiDAR Scanning (MLS) systems and UAV LiDAR Scanning (ULS) systems equipped with precise Global Navigation Satellite System (GNSS)/Inertial Measurement Unit (IMU) positioning units and LiDAR sensors are used at an increasing rate for the acquisition of high density and high accuracy point clouds because of their safety and efficiency. Without careful calibration of the boresight angles of the MLS systems and ULS systems, the accuracy of data acquired would degrade severely. This paper proposes an automatic boresight self-calibration method for the MLS systems and ULS systems using acquired multi-strip point clouds. The boresight angles of MLS systems and ULS systems are expressed in the direct geo-referencing equation and corrected by minimizing the misalignments between points scanned from different directions and different strips. Two datasets scanned by MLS systems and two datasets scanned by ULS systems were used to verify the proposed boresight calibration method. The experimental results show that the root mean square errors (RMSE) of misalignments between point correspondences of the four datasets after boresight calibration are 2.1 cm, 3.4 cm, 5.4 cm, and 6.1 cm, respectively, which are reduced by 59.6%, 75.4%, 78.0%, and 94.8% compared with those before boresight calibration.

An inertial measurement unit tracking system for body movement in comparison with optical tracking

2020 ◽  
Vol 234 (7) ◽  
pp. 728-737
Author(s):  
Rui Li ◽  
Barclay Jumet ◽  
Hongliang Ren ◽  
WenZhan Song ◽  
Zion Tsz Ho Tse
Keyword(s):  
Inertial Measurement Unit ◽  
Tracking System ◽  
Low Cost ◽  
Optical Tracking ◽  
Measurement Unit ◽  
Joint Movement ◽  
Joint Angles ◽  
Optical Tracking System ◽  
Microelectromechanical System ◽  
Inertial Measurement

The recent advancement of motion tracking technology offers better treatment tools for conditions, such as movement disorders, as the outcome of the rehabilitation could be quantitatively defined. The accurate and fast angular information output of the inertial measurement unit tracking systems enables the collection of accurate kinematic data for clinical assessment. This article presents a study of a low-cost microelectromechanical system inertial measurement unit-based tracking system in comparison with the conventional optical tracking system. The system consists of seven microelectromechanical system inertial measurement units, which could be mounted on the lower limbs of the subjects. For the feasibility test, 10 human participants were instructed to perform three different motions: walking, running, and fencing lunges when wearing specially designed sleeves. The subjects’ lower body movements were tracked using our inertial measurement unit-based system and compared with the gold standard—the NDI Polaris Vega optical tracking system. The results of the angular comparison between the inertial measurement unit and the NDI Polaris Vega optical tracking system were as follows: the average cross-correlation value was 0.85, the mean difference of joint angles was 2.00°, and the standard deviation of joint angles was ± 2.65°. The developed microelectromechanical system–based tracking system provides an alternative low-cost solution to track joint movement. Moreover, it is able to operate on an Android platform and could potentially be used to assist outdoor or home-based rehabilitation.

Sign in / Sign up

Export Citation Format

Share Document