scholarly journals Weakly Coupled Piezoelectric MEMS Resonators for Aerosol Sensing

Sensors ◽  
2020 ◽  
Vol 20 (11) ◽  
pp. 3162
Author(s):  
Malar Chellasivalingam ◽  
Hassan Imran ◽  
Milind Pandit ◽  
Adam M. Boies ◽  
Ashwin A. Seshia

This paper successfully demonstrates the potential of weakly coupled piezoelectric MEMS (Micro-Electro-Mechanical Systems) gravimetric sensors for the detection of ultra-fine particulates. As a proof-of-principle, the detection of diesel soot particles of 100 nanometres or less is demonstrated. A practical monitoring context also exists for diesel soot particles originating from combustion engines, as they are of serious health concern. The MEMS sensors employed in this work operate on the principle of vibration mode-localisation employing an amplitude ratio shift output metric for readout. Notably, gains are observed while comparing parametric sensitivities and the input referred stability for amplitude ratio and resonant frequency variations, demonstrating that the amplitude ratio output metric is particularly suitable for long-term measurements. The soot particle mass directly estimated using coupled MEMS resonators can be correlated to the mass, indirectly estimated using the condensation particle counter used as the reference instrument.

2001 ◽  
Vol 32 ◽  
pp. 421-422
Author(s):  
K.-H. NAUMANN ◽  
H. SAATHOFF ◽  
M. SCHNAITER ◽  
U. SCHURATH

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 310
Author(s):  
Muhammad Mubasher Saleem ◽  
Shayaan Saghir ◽  
Syed Ali Raza Bukhari ◽  
Amir Hamza ◽  
Rana Iqtidar Shakoor ◽  
...  

This paper presents a new design of microelectromechanical systems (MEMS) based low-g accelerometer utilizing mode-localization effect in the three degree-of-freedom (3-DoF) weakly coupled MEMS resonators. Two sets of the 3-DoF mechanically coupled resonators are used on either side of the single proof mass and difference in the amplitude ratio of two resonator sets is considered as an output metric for the input acceleration measurement. The proof mass is electrostatically coupled to the perturbation resonators and for the sensitivity and input dynamic range tuning of MEMS accelerometer, electrostatic electrodes are used with each resonator in two sets of 3-DoF coupled resonators. The MEMS accelerometer is designed considering the foundry process constraints of silicon-on-insulator multi-user MEMS processes (SOIMUMPs). The performance of the MEMS accelerometer is analyzed through finite-element-method (FEM) based simulations. The sensitivity of the MEMS accelerometer in terms of amplitude ratio difference is obtained as 10.61/g for an input acceleration range of ±2 g with thermomechanical noise based resolution of 0.22 and nonlinearity less than 0.5%.


2022 ◽  
Vol 237 ◽  
pp. 111854
Author(s):  
Xingyu Liang ◽  
Bowen Zhao ◽  
Kun Wang ◽  
Xu Lv ◽  
Yajun Wang ◽  
...  

Author(s):  
Jonathan M. Puder ◽  
Jeffrey S. Pulskamp ◽  
Ryan Q. Rudy ◽  
Ronald G. Polcawich ◽  
Sunil A. Bhave

2017 ◽  
Vol 26 (6) ◽  
pp. 1196-1203 ◽  
Author(s):  
Chun Zhao ◽  
Guillermo Sobreviela ◽  
Milind Pandit ◽  
Sijun Du ◽  
Xudong Zou ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document