scholarly journals A Path-Length Efficient, Low-Overhead, Load-Balanced Routing Protocol for Maximum Network Lifetime in Wireless Sensor Networks with Holes

Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2506
Author(s):  
Phi Le Nguyen ◽  
Thanh Hung Nguyen ◽  
Kien Nguyen
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Load Balance ◽  
Path Length ◽  
Geographic Routing ◽  
Wireless Sensor ◽  
Control Overhead ◽  
Load Balanced

In wireless sensor networks (WSNs) with holes, designing efficient routing protocols, which prolong the network lifetime, is one of the most critical issues. To this end, this paper proposes a new geographic routing protocol for WSNs named the load Balanced and constant Stretch protocol for bypassing Multiple Holes (i.e., BSMH). In contrast to the existing works in the literature, the design of BSMH simultaneously takes into account the three factors that impacted the network lifetime, including routing path length, control packet overhead, and load balance among the nodes. Moreover, BSMH aims at minimizing the routing path length and the control overhead, while maximizing the load balance. We theoretically prove the efficiency of BSMH and extensively evaluate BSMH against the state-of-the-art protocols. The evaluation results show that the proposed protocol outperforms the others in various investigated metrics, not only network lifetime, but also routing path stretch, load balance, and control overhead. Specifically, BSMH prolongs the network lifetime by 30 % compared to the existing protocols while guaranteeing that the routing path stretch is under 1.3 .

Bloom Filter Routing Protocol for Wireless Sensor Networks

2013 ◽  
Vol 779-780 ◽  
pp. 1723-1726
Author(s):  
Jiang Wei Zhou
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Routing Protocols ◽  
Bloom Filter ◽  
Geographic Routing ◽  
Wireless Sensor ◽  
The Real ◽  
Location Service ◽  
Control Overhead

Although the geographic routing protocols have better hop stretch,control overhead, storage cost and scalability than other existing routingprotocols for wireless sensor networks, source nodes need to know thecoordinates of destinations before routing data packets. To deploy thegeographic routing protocols on the real networks, it should integrate theseprotocols with location service and even virtual coordinates assignmentalgorithms. However, so far, because of the limited executable memory of sensornode, there is not a geographic routing system presented, which integrates withgeographic routing protocols and location service. Based on the above reason, anew Bloom Filter routing protocol for wireless sensor networks (BFR) ispro-posed. Like VRR, BFR is based on the identifier of sensor node butEuclidean space, so when it routes, it does not depend on the geographicinformation of nodes. Experimental results show that, compared to VRR, BFR haslower hop stretch, the storage cost and control overhead are much lower. Theresults also show that BFR is more scalable than VRR. Same as VRR, BFR can bedirectly deployed on the real sensor networks.

scholarly journals Fuzzy Logic-Based Geographic Routing Protocol for Dynamic Wireless Sensor Networks

Sensors ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 196 ◽  
Author(s):  
Xing Hu ◽  
Linhua Ma ◽  
Yongqiang Ding ◽  
Jin Xu ◽  
Yan Li ◽  
...  
Keyword(s):  
Wireless Sensor Networks ◽  
Fuzzy Logic ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Geographic Routing ◽  
Wireless Sensor ◽  
Location Information ◽  
Destination Node ◽  
Routing Overhead ◽  
Geographic Routing Protocol

The geographic routing protocol only requires the location information of local nodes for routing decisions, and is considered very efficient in multi-hop wireless sensor networks. However, in dynamic wireless sensor networks, it increases the routing overhead while obtaining the location information of destination nodes by using a location server algorithm. In addition, the routing void problem and location inaccuracy problem also occur in geographic routing. To solve these problems, a novel fuzzy logic-based geographic routing protocol (FLGR) is proposed. The selection criteria and parameters for the assessment of the next forwarding node are also proposed. In FLGR protocol, the next forward node can be selected based on the fuzzy location region of the destination node. Finally, the feasibility of the FLGR forwarding mode is verified and the performance of FLGR protocol is analyzed via simulation. Simulation results show that the proposed FLGR forwarding mode can effectively avoid the routing void problem. Compared with existing protocols, the FLGR protocol has lower routing overhead, and a higher packet delivery rate in a sparse network.

scholarly journals Energy Efficient Trust Node Based Routing Protocol (EETRP) to Maximize the Lifetime of Wireless Sensor Networks in Plateaus

2019 ◽  
Vol 15 (06) ◽  
pp. 113 ◽  
Author(s):  
Nandoori Srikanth ◽  
Muktyala Sivaganga Prasad
Keyword(s):  
Energy Efficiency ◽  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Energy Efficient ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Mobile Nodes ◽  
Energy Limitation

<p>Wireless Sensor Networks (WSNs) can extant the individual profits and suppleness with regard to low-power and economical quick deployment for numerous applications. WSNs are widely utilized in medical health care, environmental monitoring, emergencies and remote control areas. Introducing of mobile nodes in clusters is a traditional approach, to assemble the data from sensor nodes and forward to the Base station. Energy efficiency and lifetime improvements are key research areas from past few decades. In this research, to solve the energy limitation to upsurge the network lifetime, Energy efficient trust node based routing protocol is proposed. An experimental validation of framework is focused on Packet Delivery Ratio, network lifetime, throughput, energy consumption and network loss among all other challenges. This protocol assigns some high energy nodes as trusted nodes, and it decides the mobility of data collector.  The energy of mobile nodes, and sensor nodes can save up to a great extent by collecting data from trusted nodes based on their trustworthiness and energy efficiency.  The simulation outcome of our evaluation shows an improvement in all these parameters than existing clustering and Routing algorithms.<strong></strong></p>

scholarly journals A PSO-Based Uneven Dynamic Clustering Multi-Hop Routing Protocol for Wireless Sensor Networks

Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1835 ◽  
Author(s):  
Ruan ◽  
Huang
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Cluster Head ◽  
Base Station ◽  
Wireless Sensor ◽  
Dynamic Clustering ◽  
Energy Efficient Routing

Since wireless sensor networks (WSNs) are powered by energy-constrained batteries, many energy-efficient routing protocols have been proposed to extend the network lifetime. However, most of the protocols do not well balance the energy consumption of the WSNs. The hotspot problem caused by unbalanced energy consumption in the WSNs reduces the network lifetime. To solve the problem, this paper proposes a PSO (Particle Swarm Optimization)-based uneven dynamic clustering multi-hop routing protocol (PUDCRP). In the PUDCRP protocol, the distribution of the clusters will change dynamically when some nodes fail. The PSO algorithm is used to determine the area where the candidate CH (cluster head) nodes are located. The adaptive clustering method based on node distribution makes the cluster distribution more reasonable, which balances the energy consumption of the network more effectively. In order to improve the energy efficiency of multi-hop transmission between the BS (Base Station) and CH nodes, we also propose a connecting line aided route construction method to determine the most appropriate next hop. Compared with UCCGRA, multi-hop EEBCDA, EEMRP, CAMP, PSO-ECHS and PSO-SD, PUDCRP prolongs the network lifetime by between 7.36% and 74.21%. The protocol significantly balances the energy consumption of the network and has better scalability for various sizes of network.

scholarly journals Energy-Efficient Unequal Chain Length Clustering for Wireless Sensor Networks in Smart Cities

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Mohammad Baniata ◽  
Jiman Hong
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Chain Length ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Energy Efficient ◽  
Smart Cities ◽  
Cluster Head ◽  
Sensor Nodes ◽  
Wireless Sensor

The recent advances in sensing and communication technologies such as wireless sensor networks (WSN) have enabled low-priced distributed monitoring systems that are the foundation of smart cities. These advances are also helping to monitor smart cities and making our living environments workable. However, sensor nodes are constrained in energy supply if they have no constant power supply. Moreover, communication links can be easily failed because of unequal node energy depletion. The energy constraints and link failures affect the performance and quality of the sensor network. Therefore, designing a routing protocol that minimizes energy consumption and maximizes the network lifetime should be considered in the design of the routing protocol for WSN. In this paper, we propose an Energy-Efficient Unequal Chain Length Clustering (EEUCLC) protocol which has a suboptimal multihop routing algorithm to reduce the burden on the cluster head and a probability-based cluster head selection algorithm to prolong the network lifetime. Simulation results show that the EEUCLC mechanism enhanced the energy balance and prolonged the network lifetime compared to other related protocols.

scholarly journals MQoSR: A Multiobjective QoS Routing Protocol for Wireless Sensor Networks

2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
Hind Alwan ◽  
Anjali Agarwal
Keyword(s):  
Wireless Sensor Networks ◽  
Quality Of Service ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Data Transmission ◽  
Qos Routing ◽  
Wireless Sensor ◽  
Data Delivery

With the growing demand for quality-of-service (QoS) aware routing protocol in wireless networks, QoS-based routing has emerged as an interesting research topic. Quality of service guarantee in wireless sensor networks (WSNs) is difficult and more challenging due to the fact that the available resources of sensors and the various applications running over these networks have different constraints in their nature and requirements. In this paper, we present a heuristic neighbor selection mechanism in WSNs that uses the geographic routing mechanism combined with the QoS requirements to provide multiobjective QoS routing (MQoSR) for different application requirements. The problem of providing QoS routing is formulated as link, and path-based metrics. The link-based metrics are partitioned in terms of reliability, delay, distance to sink, and energy, and the path-based metrics are presented in terms of end-to-end delay, reliability of data transmission, and network lifetime. The simulation results demonstrate that MQoSR protocol is able to achieve the delay requirements, and due to optimum path selection process, the achieved data delivery ratio is always above the required one. MQoSR protocol outperforms the existing model in the literature remarkably in terms of reliable data transmission, time data delivery, and routing overhead and underlines the importance of energy-efficient solution to enhance network lifetime.

Sign in / Sign up

Export Citation Format

Share Document