scholarly journals Analysis of a Cantilevered Piezoelectric Energy Harvester in Different Orientations for Rotational Motion

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1206 ◽  
Author(s):  
Wei-Jiun Su ◽  
Jia-Han Lin ◽  
Wei-Chang Li
Keyword(s):  
Theoretical Model ◽  
Resonant Frequency ◽  
Rotational Motion ◽  
Axial Load ◽  
Energy Harvester ◽  
Excitation Frequency ◽  
Experimental Studies ◽  
Piezoelectric Energy ◽  
Piezoelectric Cantilever ◽  
Tip Mass

This paper investigates a piezoelectric energy harvester that consists of a piezoelectric cantilever and a tip mass for horizontal rotational motion. Rotational motion results in centrifugal force, which causes the axial load on the beam and alters the resonant frequency of the system. The piezoelectric energy harvester is installed on a rotational hub in three orientations—inward, outward, and tilted configurations—to examine their influence on the performance of the harvester. The theoretical model of the piezoelectric energy harvester is developed to explain the dynamics of the system and experiments are conducted to validate the model. Theoretical and experimental studies are presented with various tilt angles and distances between the harvester and the rotating center. The results show that the installation distance and the tilt angle can be used to adjust the resonant frequency of the system to match the excitation frequency.

Design and Experimental Verification of Torsion-Bending Low-Frequency Piezoelectric Energy Harvesters

2016 ◽  
Author(s):  
Hichem Abdelmoula ◽  
Nathan Sharpes ◽  
Hyeon Lee ◽  
Abdessattar Abdelkefi ◽  
Shashank Priya
Keyword(s):  
System Analysis ◽  
Energy Harvester ◽  
Excitation Frequency ◽  
Low Frequency ◽  
Load Resistance ◽  
Mode Shapes ◽  
Low Frequencies ◽  
Piezoelectric Energy ◽  
The Masses ◽  
Tip Mass

We design and experimentally validate a zigzag piezoelectric energy harvester that can generate energy at low frequencies and which can be used to operate low-power consumption electronic devices. The harvester is composed of metal and piezoelectric layers and is used to harvest energy through direct excitations. A computational model is developed using Abaqus to determine the exact mode shapes and coupled frequencies of the considered energy harvester in order to design a broadband torsion-bending mechanical system. Analysis is then performed to determine the optimal load resistance. The computational results are compared and validated with the experimental measurements. More detailed analysis is then carried out to investigate the effects of the masses on the bending and torsion natural frequencies of the harvester and generated power levels. The results show that due to the coupling between the bending and torsion modes of the zigzag structure, highest levels of the harvested power are obtained when the excitation frequency matches the coupled frequency of torsion type for three different values of the tip mass.

Nonlinear Dynamics of a Special Piezoelectric Energy Harvester With a Special Bistable Piezoelectric Cantilever Beam

2018 ◽  
Author(s):  
Ming Hui Yao ◽  
Wei Xia ◽  
Wei Zhang ◽  
Jian Yu Jiao
Keyword(s):  
Permanent Magnet ◽  
Cantilever Beam ◽  
Piezoelectric Layer ◽  
Magnetic Force ◽  
Energy Harvester ◽  
Excitation Frequency ◽  
High Energy ◽  
Nonlinear Phenomenon ◽  
Piezoelectric Energy ◽  
Piezoelectric Cantilever

This paper presents a special piezoelectric energy harvester system which is obtained by separating the end of the upper piezoelectric layer of the traditional piezoelectric cantilever beam from its basic layer. A mass I is located at the end of the separated upper piezoelectric layer (SUPL), a mass II and a permanent magnet I are located at the end of the separated lower piezoelectric beam (SLPB) and a permanent magnet II is added in the opposite position of the permanent magnet I and they face each other with same polarities. A nonlinear magnetic force which can broaden the frequency bandwidth of the system is generated mutually on the two permanent magnets. Studies find that this special piezoelectric energy harvester has extremely high energy capture efficiency. In order to further explore the reason of high efficiency, experimental research on its dynamic behavior is carried out. The experimental results show that the vibrations of the SUPL and the SLPB are relatively simple. The dynamic behaviors of the SUPL, the SLPB and the unseparated part are different. The unseparated part of the piezoelectric shows relatively complex nonlinear phenomenon due to the interaction of nonlinear magnetic force and the collision. With the increase of the external excitation frequency, period doubling motion and almost periodic motion appear alternately.

Modeling of V-Shaped Beam-Mass Piezoelectric Energy Harvester: Impact of the Angle Between the Beams

2012 ◽  
Author(s):  
Wei-Jiun Su ◽  
Jean W. Zu
Keyword(s):  
Resonant Frequency ◽  
Energy Harvester ◽  
Beam Theory ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Piezoelectric Layers ◽  
Cantilevered Beam ◽  
Power Frequency ◽  
Tip Mass ◽  
Euler Bernoulli Beam

Piezoelectric material has been widely utilized in vibration-based energy harvesters (VEH). The most common configuration of piezoelectric energy harvester is a cantilevered beam with unimorph or bimorph piezoelectric layers. In this paper, a new configuration of PEH is proposed. Two beams are assembled as V shape with tip masses attached. The first beam is a cantilevered beam with tip mass while the second beam is attached to the end of the first beam with a certain angle. Piezoelectric layers are attached to both beams in unimorph configuration for power generation. The analytical solution is derived based on Euler-Bernoulli beam theory. In this analysis, the angle varies from 0 to 135 degree to see the influence of angle on voltage and power frequency response. The V-shaped VEH is proven to have the second resonant frequency relatively close to the first resonant frequency when compared with conventional cantilevered VEH. Furthermore, the angle between the two beams will influence the ratio of the second to the first resonant frequency. By choosing a suitable angle, the V-shaped structure can effectively broaden the bandwidth.

scholarly journals Stochastic Thermodynamics of a Piezoelectric Energy Harvester Model

Entropy ◽  
2021 ◽  
Vol 23 (6) ◽  
pp. 677
Author(s):  
Luigi Costanzo ◽  
Alessandro Lo Schiavo ◽  
Alessandro Sarracino ◽  
Massimo Vitelli
Keyword(s):  
Experimental Data ◽  
Theoretical Model ◽  
Numerical Analysis ◽  
Linear Model ◽  
Energy Harvester ◽  
Time Intervals ◽  
Stochastic Thermodynamics ◽  
Piezoelectric Energy ◽  
Load Resistor ◽  
Tip Mass

We experimentally study a piezoelectric energy harvester driven by broadband random vibrations. We show that a linear model, consisting of an underdamped Langevin equation for the dynamics of the tip mass, electromechanically coupled with a capacitor and a load resistor, can accurately describe the experimental data. In particular, the theoretical model allows us to define fluctuating currents and to study the stochastic thermodynamics of the system, with focus on the distribution of the extracted work over different time intervals. Our analytical and numerical analysis of the linear model is succesfully compared to the experiments.

Joint Characteristic Effect on the Performance of Nonlinear Piezoelectric Energy Harvesters

2016 ◽  
Author(s):  
Kamal Jahani ◽  
Parisa Aghazadeh
Keyword(s):  
Energy Harvester ◽  
Lagrange Equation ◽  
Equations Of Motion ◽  
Maximum Output Power ◽  
Excitation Frequency ◽  
Numerical Approach ◽  
Maximum Output ◽  
Piezoelectric Energy ◽  
Joint Characteristic ◽  
Tip Mass

In this work, the effects of joint characteristics on the performance of a nonlinear piezoelectric energy harvester are investigated numerically. Large amplitude deflection unimorph beam with a tip mass and a nonlinear piezoelectric layer is considered as an energy harvester. By applying Euler-Lagrange equation and the Gauss’s law, mechanical and electrical equations of motion are obtained respectively, under two scenarios, i.e. with an ideal (rigid) joint and with a flexible one. A numerical approach is followed to investigate the effects of each nonlinear parameter of the harvester (stiffness, damping and piezoelectric coefficient) on harvested power. Results show that considering ideal joint between harvester and base structure leads to overestimating the maximum output power and the range of effective excitation frequency.

Modeling and Experimental Validations of a Piezoelectric Energy Harvester Under Combined Galloping and Base Excitations

2014 ◽  
Author(s):  
Amin Bibo ◽  
Abdessattar Abdelkefi ◽  
Mohammed F. Daqaq
Keyword(s):  
Bluff Body ◽  
Energy Harvester ◽  
Constitutive Relations ◽  
Excitation Frequency ◽  
Primary Resonance ◽  
Beam Theory ◽  
Excitation Amplitude ◽  
The Body ◽  
Base Excitation ◽  
Piezoelectric Energy

This paper develops an experimentally validated model of a piezoelectric energy harvester under combined aeroelastic-galloping and base excitations. To that end, an energy harvester consisting of a thin piezoelectric cantilever beam subjected to vibratory base excitation is considered. To permit galloping excitation, a bluff body is rigidly attached at the free end such that a net aerodynamic lift is generated as the incoming airflow separates on both sides of the body giving rise to limit cycle oscillations when the flow velocity exceeds a critical value. A nonlinear electromechanical distributed-parameter model of the harvester under the combined excitation is derived using the energy approach and by adopting the nonlinear Euler-Bernoulli beam theory, linear constitutive relations for the piezoelectric transduction, and the quasi-steady assumption for the aerodynamic loading. The partial differential equations of the system are discretized and a reduced-order-model is obtained. The mathematical model is validated by conducting a series of experiments with different loading conditions represented by wind speed, base excitation amplitude, and excitation frequency around the primary resonance.

Optimization of energy harvesting based on the uniform deformation of piezoelectric ceramic

2016 ◽  
Vol 09 (05) ◽  
pp. 1650069 ◽  
Author(s):  
Yaoze Liu ◽  
Tongqing Yang ◽  
Fangming Shu
Keyword(s):  
Energy Harvesting ◽  
Power Output ◽  
Piezoelectric Ceramic ◽  
Energy Harvester ◽  
Optimization Method ◽  
Piezoelectric Energy ◽  
Bonding Area ◽  
Almost All ◽  
Matching Load ◽  
Tip Mass

Since the piezoelectric properties were used for energy harvesting, almost all forms of energy harvester needs to be bonded with a mass block to achieve pre-stress. In this article, disc type piezoelectric energy harvester is chosen as the research object and the relationship between mass bonding area and power output is studied. It is found that if the bonding area is changed as curved, which is usually complanate in previous studies, the deformation of the circular piezoelectric ceramic is more uniform and the power output is enhanced. In order to test the change of the deformation, we spray several homocentric annular electrodes on the surface of a piece of bare piezoelectric ceramic and the output of each electrode is tested. Through this optimization method, the power output is enhanced to more than 11[Formula: see text]mW for a matching load about 24[Formula: see text]k[Formula: see text] and a tip mass of 30[Formula: see text]g at its resonant frequency of 139[Formula: see text]Hz.

Magnetic plucked meso-scale piezoelectric energy harvester for low-frequency rotational motion

2021 ◽  
Author(s):  
Chao-Ting Chen ◽  
Wei-Jiun Su ◽  
Wen-Jong Wu ◽  
dejan vasic ◽  
François Costa
Keyword(s):  
Rotational Motion ◽  
Energy Harvester ◽  
Low Frequency ◽  
Piezoelectric Energy ◽  
Meso Scale

Energy Resource for a RFID System Based on Dynamic Features of Reddy-Levinson Beam

2020 ◽  
Author(s):  
Alireza Babaei ◽  
Johné Parker ◽  
Paria Moshaver
Keyword(s):  
Resonant Frequency ◽  
Shear Deformation ◽  
Displacement Field ◽  
Energy Harvester ◽  
Frequency Variation ◽  
Low Input ◽  
Piezoelectric Energy ◽  
Rfid System ◽  
Proposed Model ◽  
Thick Beam

Abstract Understanding the effect of design parameters on resonant frequency variation is a critically important aspect of piezoelectric energy harvester device design. As a first step in more accurately investigating the performance of a fixture designed for targeted RFID tag communication that also utilizes an energy harvesting application, this paper analyzes the variations in resonant frequency of a higher-order beam based on Reddy-Levinson theory (RLBT) under rotation effects. A long-term goal of this research is to implement an effective energy harvester on the RFID system. Part of the experimental RFID test fixture can be modeled as a beam (or beam element); thus, understanding the resonance frequency variations due to shear deformation and rotation effects is an important first step in obtaining information about the efficacy of the fixture in serving as an energy harvester. Investigating the performance of a beam also provides valuable information about the maximum power, frequency bandwidth, and tuning ability of the device that can be expected from an analogous energy harvester. For the first time, the resonant frequency variation of a rotating thick beam is investigated. Specifically, RLBT is used to verify the effects of shear deformation upon resonant frequency, and a coupled displacement field is utilized to enable tuning the potential piezoelectric energy harvester to low-input excitations by means of constraining translational and rotational movements of the system based on a linear constraint equation. Navier’s method as an analytical-numerical method is adopted to discretize the continuous system and to find resonant frequencies, respectively. Results reveal the significance of beam thickness and rotation effects of the proposed model for the purpose of minimizing energy usage. Current results are compared and verified numerically with available benchmarks to confirm a satisfactory level of accuracy. The proposed model, which is based on a coupled displacement field, can also be used to design other piezoelectric electro-mechanical-systems; e.g., vibration isolators, and vibration controllers. In other words, in an energy-scavenging system, a fundamental understanding of parameters affecting the resonant frequency can be accomplished through the presented analysis. The proposed model highlights the fact that, by adopting a proper speed factor, tuning the piezoelectric energy harvester to low-input excitations is possible. Additionally, it is observed that the rotation effect on the resonant frequency is more severe than effects of slenderness ratio. Finally, in this paper an improved model is proposed to capture the shear deformation effect, particularly for thick-beam energy harvesters, with the capability of tuning to low-input excitations.

Sign in / Sign up

Export Citation Format

Share Document