scholarly journals Vapor Selectivity of a Natural Photonic Crystal to Binary and Tertiary Mixtures Containing Chemical Warfare Agent Simulants

Sensors ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 157 ◽  
Author(s):  
Joshua Kittle ◽  
Benjamin Fisher ◽  
Courtney Kunselman ◽  
Aimee Morey ◽  
Andrea Abel

Vapor sensing via light reflected from photonic crystals has been increasingly studied as a means to rapidly identify analytes, though few studies have characterized vapor mixtures or chemical warfare agent simulants via this technique. In this work, light reflected from the natural photonic crystals found within the wing scales of the Morpho didius butterfly was analyzed after exposure to binary and tertiary mixtures containing dimethyl methylphosphonate, a nerve agent simulant, and dichloropentane, a mustard gas simulant. Distinguishable spectra were generated with concentrations tested as low as 30 ppm and 60 ppm for dimethyl methylphosphonate and dichloropentane, respectively. Individual vapors, as well as mixtures, yielded unique responses over a range of concentrations, though the response of binary and tertiary mixtures was not always found to be additive. Thus, while selective and sensitive to vapor mixtures containing chemical warfare agent simulants, this technique presents challenges to identifying these simulants at a sensitivity level appropriate for their toxicity.

Sensors ◽  
2019 ◽  
Vol 19 (14) ◽  
pp. 3058 ◽  
Author(s):  
Gábor Piszter ◽  
Krisztián Kertész ◽  
Zsolt Bálint ◽  
László Péter Biró

Photonic nanoarchitectures in the wing scales of butterflies and moths are capable of fast and chemically selective vapor sensing due to changing color when volatile vapors are introduced to the surrounding atmosphere. This process is based on the capillary condensation of the vapors, which results in the conformal change of the chitin-air nanoarchitectures and leads to a vapor-specific optical response. Here, we investigated the optical responses of the wing scales of several butterfly and moth species when mixtures of different volatile vapors were applied to the surrounding atmosphere. We found that the optical responses for the different vapor mixtures fell between the optical responses of the two pure solvents in all the investigated specimens. The detailed evaluation, using principal component analysis, showed that the butterfly-wing-based sensor material is capable of differentiating between vapor mixtures as the structural color response was found to be characteristic for each of them.


2020 ◽  
Vol 22 (13) ◽  
pp. 4105-4115
Author(s):  
Noémie Emmanuel ◽  
Pauline Bianchi ◽  
Julien Legros ◽  
Jean-Christophe M. Monbaliu

Intensified chemical neutralization of a chemical warfare agent simulant CEES with air and light under continuous flow conditions.


2020 ◽  
Vol 12 (17) ◽  
pp. 2206-2214 ◽  
Author(s):  
Yong Pan ◽  
Tengxiao Guo ◽  
Genwei Zhang ◽  
Junchao Yang ◽  
Liu Yang ◽  
...  

In this study, diisopropyl methylphosphonate (DIMP), tributyl phosphate (TBP), and dimethyl methylphosphonate (DMMP) were selected as organophosphorus chemical warfare agent (CWA) simulants.


2018 ◽  
Vol 20 (7) ◽  
pp. 4840-4850 ◽  
Author(s):  
Xin Tang ◽  
Zachary Hicks ◽  
Linjie Wang ◽  
Gerd Ganteför ◽  
Kit H. Bowen ◽  
...  

The adsorption and decomposition of dimethyl methylphosphonate (DMMP), a chemical warfare agent (CWA) simulant, on size-selected molybdenum oxide trimer clusters, i.e. (MoO3)3, was studied both experimentally and theoretically.


2021 ◽  
Author(s):  
Osama Abuzalat ◽  
Setareh Homayoonnia ◽  
Danny Wong ◽  
Hesham R. Tantawy ◽  
Seonghwan Kim

2-Chloroethyl ethyl sulfide (CEES) is a simulant for the chemical warfare agent, bis(2-chloroethyl) sulfide, also known as mustard gas. Functionalized Zr-BTC is synthesized and exploited for the optical detection of CEES.


Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1703 ◽  
Author(s):  
Yu ◽  
Son ◽  
Yoo ◽  
Cha ◽  
Lee ◽  
...  

Methods for the rapid removal of chemical warfare agents are of critical importance. In this work, a porous activated carbon material (C-PAC) was prepared from chitosan flakes via single-step potassium carbonate (K2CO3) activation for the prompt adsorption of dimethyl methylphosphonate (DMMP). C-PAC samples were prepared using different carbonization temperatures (350, 550, and 750 °C) at a constant K2CO3/chitosan ratio (1:2) and using different activator ratios (K2CO3/chitosan ratios of 1:0.5, 1:1, 1:2, and 1:3) at 750 °C. Furthermore, we evaluated the effect of preparation conditions on the adsorption capacities of the various C-PAC materials for DMMP under ambient conditions (25 °C). Notably, for the C-PAC material prepared at 750 °C using a K2CO3/chitosan ratio of 1:2, the DMMP adsorption was saturated at approximately 412 mg·g−1 carbon after 48 h. The good performance of this material makes it a potential candidate for use in remedial applications or protective gear.


ACS Omega ◽  
2017 ◽  
Vol 2 (11) ◽  
pp. 8301-8307 ◽  
Author(s):  
Joshua D. Kittle ◽  
Benjamin P. Fisher ◽  
Anthony J. Esparza ◽  
Aimee M. Morey ◽  
Scott T. Iacono

Sign in / Sign up

Export Citation Format

Share Document