scholarly journals Ultra-Low Power Wearable Infant Sleep Position Sensor

Sensors ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 61
Author(s):  
Inyeol Yun ◽  
Jinpyeo Jeung ◽  
Mijung Kim ◽  
Young-Seok Kim ◽  
Yoonyoung Chung

Numerous wearable sensors have been developed for a variety of needs in medical/healthcare/wellness/sports applications, but there are still doubts about their usefulness due to uncomfortable fit or frequent battery charging. Because the size or capacity of battery is the major factor affecting the convenience of wearable sensors, power consumption must be reduced. We developed a method that can significantly reduce the power consumption by introducing a signal repeater and a special switch that provides power only when needed. Antenna radiation characteristics are an important factor in wireless wearable sensors, but soft material encapsulation for comfortable fit results in poor wireless performance. We improved the antenna radiation characteristics by a local encapsulation patterning. In particular, ultra-low power operation enables the use of paper battery to achieve a very thin and flexible form factor. Also, we verified the human body safety through specific absorption rate simulations. With these methods, we demonstrated a wearable infant sleep position sensor. Infants are unable to call for help in unsafe situations, and it is not easy for caregivers to observe them all the time. Our wearable sensor detects infants’ sleep positions in real time and automatically alerts the caregivers when needed.

2016 ◽  
Vol 136 (11) ◽  
pp. 1555-1566 ◽  
Author(s):  
Jun Fujiwara ◽  
Hiroshi Harada ◽  
Takuya Kawata ◽  
Kentaro Sakamoto ◽  
Sota Tsuchiya ◽  
...  

Nano Letters ◽  
2013 ◽  
Vol 13 (4) ◽  
pp. 1451-1456 ◽  
Author(s):  
T. Barois ◽  
A. Ayari ◽  
P. Vincent ◽  
S. Perisanu ◽  
P. Poncharal ◽  
...  

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 889
Author(s):  
Xiaoying Deng ◽  
Peiqi Tan

An ultra-low-power K-band LC-VCO (voltage-controlled oscillator) with a wide tuning range is proposed in this paper. Based on the current-reuse topology, a dynamic back-gate-biasing technique is utilized to reduce power consumption and increase tuning range. With this technique, small dimension cross-coupled pairs are allowed, reducing parasitic capacitors and power consumption. Implemented in SMIC 55 nm 1P7M CMOS process, the proposed VCO achieves a frequency tuning range of 19.1% from 22.2 GHz to 26.9 GHz, consuming only 1.9 mW–2.1 mW from 1.2 V supply and occupying a core area of 0.043 mm2. The phase noise ranges from −107.1 dBC/HZ to −101.9 dBc/Hz at 1 MHz offset over the whole tuning range, while the total harmonic distortion (THD) and output power achieve −40.6 dB and −2.9 dBm, respectively.


2021 ◽  
Vol 24 (3) ◽  
pp. 30-34
Author(s):  
Rishi Shukla ◽  
Neev Kiran ◽  
Rui Wang ◽  
Jeremy Gummeson ◽  
Sunghoon Ivan Lee

Over the past few decades, we have witnessed tremendous advancements in semiconductor and MEMS technologies, leading to the proliferation of ultra-miniaturized and ultra-low-power (in micro-watt ranges) wearable devices for wellness and healthcare [1]. Most of these wearable sensors are battery powered for their operation. The use of an on-device battery as the primary energy source poses a number of challenges that serve as the key barrier to the development of novel wearable applications and the widespread use of numerous, seamless wearable sensors [5].


2003 ◽  
Vol 157 (5) ◽  
pp. 469 ◽  
Author(s):  
Carl E. Hunt ◽  
Samuel M. Lesko ◽  
Richard M. Vezina ◽  
Rosha McCoy ◽  
Michael J. Corwin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document