scholarly journals Restoration Method of a Blurred Star Image for a Star Sensor Under Dynamic Conditions

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4127 ◽  
Author(s):  
Zhiya Mu ◽  
Jun Wang ◽  
Xin He ◽  
Zhonghui Wei ◽  
Jiawei He ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Kinematic Model ◽  
Motion Blur ◽  
Star Sensor ◽  
Signal To Noise ◽  
Dynamic Conditions ◽  
Star Image ◽  
Centroid Coordinates ◽  
Noise Ratio ◽  
Restoration Method

Under the dynamic working conditions of a star sensor, motion blur of the star will appear due to its energy dispersion during imaging, leading to the degradation of the star centroid accuracy and attitude accuracy of the star sensor. To address this, a restoration method of a blurred star image for a star sensor under dynamic conditions is presented in this paper. First, a kinematic model of the star centroid and the degradation function of blurred star image under different conditions are analyzed. Then, an improved curvature filtering method based on energy function is proposed to remove the noise and improve the signal-to-noise ratio of the star image. Finally, the Richardson Lucy algorithm is used and the termination condition of the iterative equation is established by using the star centroid coordinates in three consecutive frames of restored images to ensure the restoration effect of the blurred star image and the accuracy of the star centroid coordinates. Under the dynamic condition of 0~4°/s, the proposed algorithm can effectively improve the signal-to-noise ratio of a blurred star image and maintain an error of the star centroid coordinates that is less than 0.1 pixels, which meets the requirement for high centroid accuracy.

Region-confined restoration method for motion-blurred star image of the star sensor under dynamic conditions

2016 ◽  
Vol 55 (17) ◽  
pp. 4621 ◽  
Author(s):  
Liheng Ma ◽  
Franco Bernelli-Zazzera ◽  
Guangwen Jiang ◽  
Xingshu Wang ◽  
Zongsheng Huang ◽  
...  
Keyword(s):  
Star Sensor ◽  
Dynamic Conditions ◽  
Star Image ◽  
Restoration Method

scholarly journals Attitude-correlated frames adding approach to improve signal-to-noise ratio of star image for star tracker

2019 ◽  
Vol 27 (11) ◽  
pp. 15548 ◽  
Author(s):  
Yuanman Ni ◽  
Dongkai Dai ◽  
Wenfeng Tan ◽  
Xingshu Wang ◽  
Shiqiao Qin
Keyword(s):  
Signal To Noise Ratio ◽  
Star Tracker ◽  
Signal To Noise ◽  
Star Image ◽  
Noise Ratio

scholarly journals Low-latency time-of-flight non-line-of-sight imaging at 5 frames per second

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ji Hyun Nam ◽  
Eric Brandt ◽  
Sebastian Bauer ◽  
Xiaochun Liu ◽  
Marco Renna ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Time Of Flight ◽  
Motion Blur ◽  
Line Of Sight ◽  
Low Latency ◽  
Imaging Method ◽  
Signal To Noise ◽  
Array Detectors ◽  
Noise Ratio ◽  
Non Line Of Sight

AbstractNon-Line-Of-Sight (NLOS) imaging aims at recovering the 3D geometry of objects that are hidden from the direct line of sight. One major challenge with this technique is the weak available multibounce signal limiting scene size, capture speed, and reconstruction quality. To overcome this obstacle, we introduce a multipixel time-of-flight non-line-of-sight imaging method combining specifically designed Single Photon Avalanche Diode (SPAD) array detectors with a fast reconstruction algorithm that captures and reconstructs live low-latency videos of non-line-of-sight scenes with natural non-retroreflective objects. We develop a model of the signal-to-noise-ratio of non-line-of-sight imaging and use it to devise a method that reconstructs the scene such that signal-to-noise-ratio, motion blur, angular resolution, and depth resolution are all independent of scene depth suggesting that reconstruction of very large scenes may be possible.

Kinematic Precision Scaling With Physical Errors in Miniaturization of Four-Bar Polymer Compliant Machines

2006 ◽  
Vol 129 (5) ◽  
pp. 951-960
Author(s):  
R. J. Chang ◽  
Y. L. Wang
Keyword(s):  
Numerical Analysis ◽  
Material Properties ◽  
Compliant Mechanism ◽  
Experimental Testing ◽  
Signal To Noise Ratio ◽  
Kinematic Model ◽  
Experimental Tests ◽  
Signal To Noise ◽  
Compliant Joints ◽  
Noise Ratio

A precision-scaling kinematic model with the effects of physical error is investigated in the miniaturization of four-bar polymer machines with compliant joints. A pseudolinkages model (PLM) for the multiple-links compliant machine is formulated. A scaling formulation of the multiple-links compliant machine and its associated PLM is developed. A method for scaled-up test and scaled-down analysis of the compliant mechanism with the considerations of physical errors of fabrication processes, material properties, and experimental tests is proposed. By defining an index of signal-to-noise ratio, the performance of the miniature realization under physical errors is evaluated. The applications of the scaling PLM for the miniature realization of a compliant machine are illustrated by performing both numerical analysis and experimental testing on four-bar compliant polyethylene machines.

Determination of the Best Emulsion for the Microscopy of Crystals

1981 ◽  
Vol 39 ◽  
pp. 32-33
Author(s):  
David A. Grano ◽  
Kenneth H. Downing
Keyword(s):  
Spatial Frequency ◽  
Information Transfer ◽  
Signal To Noise Ratio ◽  
Experimental Situation ◽  
Photographic Emulsion ◽  
Modulation Transfer ◽  
Signal To Noise ◽  
Frequency Space ◽  
Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

1981 ◽  
Vol 39 ◽  
pp. 226-227
Author(s):  
W. Kunath ◽  
K. Weiss ◽  
E. Zeitler
Keyword(s):  
Signal To Noise Ratio ◽  
Carbon Support ◽  
Electronic System ◽  
Optic Axis ◽  
Hollow Cone ◽  
Signal To Noise ◽  
Bright Field ◽  
Noise Ratio ◽  
Single Field ◽  
Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Speech Reception in the Presence of Classroom Noise

1979 ◽  
Vol 10 (4) ◽  
pp. 221-230 ◽  
Author(s):  
Veronica Smyth
Keyword(s):  
Signal To Noise Ratio ◽  
Learning Processes ◽  
Speech Discrimination ◽  
Signal To Noise ◽  
Speech Reception ◽  
Monosyllabic Words ◽  
Noise Ratio

Three hundred children from five to 12 years of age were required to discriminate simple, familiar, monosyllabic words under two conditions: 1) quiet, and 2) in the presence of background classroom noise. Of the sample, 45.3% made errors in speech discrimination in the presence of background classroom noise. The effect was most marked in children younger than seven years six months. The results are discussed considering the signal-to-noise ratio and the possible effects of unwanted classroom noise on learning processes.

Quantifying the Effects of Background Speech Babble on Preschool Children's Novel Word Learning in a Multisession Paradigm: A Preliminary Study

2020 ◽  
Vol 63 (1) ◽  
pp. 345-356
Author(s):  
Meital Avivi-Reich ◽  
Megan Y. Roberts ◽  
Tina M. Grieco-Calub
Keyword(s):  
Word Learning ◽  
Signal To Noise Ratio ◽  
Preschool Age ◽  
Exposure Condition ◽  
Signal To Noise ◽  
Verbal Recall ◽  
Referent Selection ◽  
Main Effect ◽  
Noise Ratio ◽  
Novel Word Learning

Purpose This study tested the effects of background speech babble on novel word learning in preschool children with a multisession paradigm. Method Eight 3-year-old children were exposed to a total of 8 novel word–object pairs across 2 story books presented digitally. Each story contained 4 novel consonant–vowel–consonant nonwords. Children were exposed to both stories, one in quiet and one in the presence of 4-talker babble presented at 0-dB signal-to-noise ratio. After each story, children's learning was tested with a referent selection task and a verbal recall (naming) task. Children were exposed to and tested on the novel word–object pairs on 5 separate days within a 2-week span. Results A significant main effect of session was found for both referent selection and verbal recall. There was also a significant main effect of exposure condition on referent selection performance, with more referents correctly selected for word–object pairs that were presented in quiet compared to pairs presented in speech babble. Finally, children's verbal recall of novel words was statistically better than baseline performance (i.e., 0%) on Sessions 3–5 for words exposed in quiet, but only on Session 5 for words exposed in speech babble. Conclusions These findings suggest that background speech babble at 0-dB signal-to-noise ratio disrupts novel word learning in preschool-age children. As a result, children may need more time and more exposures of a novel word before they can recognize or verbally recall it.

On the Signal-to-Noise Ratio for Boolean Functions

2020 ◽  
Vol E103.A (12) ◽  
pp. 1659-1665
Author(s):  
Yu ZHOU ◽  
Wei ZHAO ◽  
Zhixiong CHEN ◽  
Weiqiong WANG ◽  
Xiaoni DU
Keyword(s):  
Boolean Functions ◽  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Noise Ratio
Sign in / Sign up

Export Citation Format

Share Document