scholarly journals MuCHLoc: Indoor ZigBee Localization System Utilizing Inter-Channel Characteristics

Sensors ◽  
2019 ◽  
Vol 19 (7) ◽  
pp. 1645 ◽  
Author(s):  
Ryota Kimoto ◽  
Shigemi Ishida ◽  
Takahiro Yamamoto ◽  
Shigeaki Tagashira ◽  
Akira Fukuda
Keyword(s):  
Large Scale ◽  
Indoor Localization ◽  
Single Channel ◽  
Sensor Nodes ◽  
Localization Problem ◽  
Sensor Localization ◽  
Localization Accuracy ◽  
Localization System ◽  
Channel Diversity ◽  
Radio Signals

The deployment of a large-scale indoor sensor network faces a sensor localization problem because we need to manually locate significantly large numbers of sensors when Global Positioning System (GPS) is unavailable in an indoor environment. Fingerprinting localization is a popular indoor localization method relying on the received signal strength (RSS) of radio signals, which helps to solve the sensor localization problem. However, fingerprinting suffers from low accuracy because of an RSS instability, particularly in sensor localization, owing to low-power ZigBee modules used on sensor nodes. In this paper, we present MuCHLoc, a fingerprinting sensor localization system that improves the localization accuracy by utilizing channel diversity. The key idea of MuCHLoc is the extraction of channel diversity from the RSS of Wi-Fi access points (APs) measured on multiple ZigBee channels through fingerprinting localization. MuCHLoc overcomes the RSS instability by increasing the dimensions of the fingerprints using channel diversity. We conducted experiments collecting the RSS of Wi-Fi APs in a practical environment while switching the ZigBee channels, and evaluated the localization accuracy. The evaluations revealed that MuCHLoc improves the localization accuracy by approximately 15% compared to localization using a single channel. We also showed that MuCHLoc is effective in a dynamic radio environment where the radio propagation channel is unstable from the movement of objects including humans.

scholarly journals RILS: RFID indoor localization system using mobile readers

2018 ◽  
Vol 14 (4) ◽  
pp. 155014771877128 ◽  
Author(s):  
Jinkai Liu ◽  
Yanqing Qiu ◽  
Kezhao Yin ◽  
Wentong Dong ◽  
Jiaqing Luo
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Large Scale ◽  
Indoor Localization ◽  
Scheduling Algorithm ◽  
Localization Accuracy ◽  
Localization System ◽  
Continuous Scanning ◽  
Reference Tags ◽  
Frequency Identification

The radio frequency identification technology was given greater interest as it is widely used for identification and localization in the cognitive radio sensor networks. While radio frequency identification–based indoor localization is attractive, the need for a large-scale and high-density deployment of readers and reference tags is costly. Using mobile readers mounted on guide rails, we design and implement an RFID indoor localization system, which requires neither reference tags nor received signal strength indicator functions, for stock-taking and searching in warehouse operations. In particular, we install two guide rails, which can allow a reader to move horizontally or vertically, on the ceiling of a warehouse or workshop. We then propose a continuous scanning algorithm to improve the accuracy for locating a single tagged object and a category-based scheduling algorithm to shorten the time for locating multiple tagged objects. Our primary experimental results show that RFID indoor localization system can achieve high time efficiency and localization accuracy in the indoor localization.

scholarly journals An Indoor Localization System Using Residual Learning with Channel State Information

Entropy ◽  
2021 ◽  
Vol 23 (5) ◽  
pp. 574
Author(s):  
Chendong Xu ◽  
Weigang Wang ◽  
Yunwei Zhang ◽  
Jie Qin ◽  
Shujuan Yu ◽  
...  
Keyword(s):  
Channel State Information ◽  
Indoor Environment ◽  
Indoor Localization ◽  
Location Based Services ◽  
Channel State ◽  
State Information ◽  
Localization Accuracy ◽  
Localization System ◽  
Increasing Demand ◽  
Degradation Problem

With the increasing demand of location-based services, neural network (NN)-based intelligent indoor localization has attracted great interest due to its high localization accuracy. However, deep NNs are usually affected by degradation and gradient vanishing. To fill this gap, we propose a novel indoor localization system, including denoising NN and residual network (ResNet), to predict the location of moving object by the channel state information (CSI). In the ResNet, to prevent overfitting, we replace all the residual blocks by the stochastic residual blocks. Specially, we explore the long-range stochastic shortcut connection (LRSSC) to solve the degradation problem and gradient vanishing. To obtain a large receptive field without losing information, we leverage the dilated convolution at the rear of the ResNet. Experimental results are presented to confirm that our system outperforms state-of-the-art methods in a representative indoor environment.

scholarly journals DSCP: Depthwise Separable Convolution-Based Passive Indoor Localization Using CSI Fingerprint

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Chong Han ◽  
Wenjing Xun ◽  
Lijuan Sun ◽  
Zhaoxiao Lin ◽  
Jian Guo
Keyword(s):  
Indoor Localization ◽  
Wireless Sensing ◽  
Training Phase ◽  
Training Time ◽  
Localization Accuracy ◽  
Localization System ◽  
Complex Models ◽  
Indoor Scenarios ◽  
Trained Network ◽  
Localization Systems

Wi-Fi-based indoor localization has received extensive attention in wireless sensing. However, most Wi-Fi-based indoor localization systems have complex models and high localization delays, which limit the universality of these localization methods. To solve these problems, a depthwise separable convolution-based passive indoor localization system (DSCP) is proposed. DSCP is a lightweight fingerprint-based localization system that includes an offline training phase and an online localization phase. In the offline training phase, the indoor scenario is first divided into different areas to set training locations for collecting CSI. Then, the amplitude differences of these CSI subcarriers are extracted to construct location fingerprints, thereby training the convolutional neural network (CNN). In the online localization phase, CSI data are first collected at the test locations, and then, the location fingerprint is extracted and finally fed to the trained network to obtain the predicted location. The experimental results show that DSCP has a short training time and a low localization delay. DSCP achieves a high localization accuracy, above 97%, and a small median localization distance error of 0.69 m in typical indoor scenarios.

scholarly journals Improved GbLN-PSO Algorithm for Indoor Localization in Wireless Sensor Network

2021 ◽  
pp. 242-249
Author(s):  
M.Shahkhir Mozamir ◽  
◽  
Rohani Binti Abu Bakar ◽  
Wan Isni Soffiah Wan Din ◽  
Zalili Binti Musa
Keyword(s):  
Particle Swarm Optimization ◽  
Indoor Localization ◽  
Particle Swarm ◽  
Pso Algorithm ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Computational Time ◽  
Swarm Optimization ◽  
Localization Accuracy ◽  
Local Neighborhood

Localization is one of the important matters for Wireless Sensor Networks (WSN) because various applications are depending on exact sensor nodes position. The problem in localization is the gained low accuracy in estimation process. Thus, this research is intended to increase the accuracy by overcome the problem in the Global best Local Neighborhood Particle Swarm Optimization (GbLN-PSO) to gain high accuracy. To compass this problem, an Improved Global best Local Neighborhood Particle Swarm Optimization (IGbLN-PSO) algorithm has been proposed. In IGbLN-PSO algorithm, there are consists of two phases: Exploration phase and Exploitation phase. The neighbor particles population that scattered around the main particles, help in the searching process to estimate the node location more accurately and gained lesser computational time. Simulation results demonstrated that the proposed algorithm have competence result compared to PSO, GbLN-PSO and TLBO algorithms in terms of localization accuracy at 0.02%, 0.01% and 59.16%. Computational time result shows the proposed algorithm less computational time at 80.07%, 17.73% and 0.3% compared others.

Implementation and evaluation of a laser scan localization scheme for sensor nodes

Sensor Review ◽  
2020 ◽  
Vol 40 (1) ◽  
pp. 97-106
Author(s):  
Shugong Wei
Keyword(s):  
Theoretical Analysis ◽  
Laser Beam ◽  
Design Methodology ◽  
Sensor Nodes ◽  
Content Type ◽  
Localization Accuracy ◽  
Localization System ◽  
Localization Scheme ◽  
Experimental Apparatus ◽  
Sensor Locations

Purpose In this paper, an experimental apparatus was designed and subsequent theoretical analysis and simulations were conducted on the effectiveness and advantages of a novel laser beam scan localization (BLS) system. Design/methodology/approach The system used a moving location assistant (LA) with a laser beam, through which the deployed area was scanned. The laser beam sent identity documents (IDs) to unknown nodes to obtain the sensor locations. Findings The results showed that the system yielded significant benefits compared with other localization methods, and a high localization accuracy could be achieved without the aid of expensive hardware on the sensor nodes. Furthermore, four positioning mode features in this localization system were realized and compared. Originality/value In this paper, an experimental apparatus was designed and subsequent theoretical analysis and simulations were conducted on the effectiveness and advantages of a novel laser BLS system. The system used a moving LA with a laser beam, through which the deployed area was scanned. The laser beam sent IDs to unknown nodes to obtain the sensor locations.

scholarly journals Noise Reduction for Radio Map Crowdsourcing Building in WLAN Indoor Localization System

2021 ◽  
Author(s):  
liye zhang ◽  
Zhuang Wang ◽  
Xiaoliang Meng ◽  
Chao Fang ◽  
Cong Liu
Keyword(s):  
Indoor Localization ◽  
Sensor Data ◽  
Mode Switching ◽  
Map Building ◽  
Position Information ◽  
Localization Accuracy ◽  
Localization System ◽  
Straight Line ◽  
Indoor Positioning System ◽  
Radio Map

Abstract Recent years have witnessed a growing interest in using WLAN fingerprint-based method for indoor localization system because of its cost effectiveness and availability compared to other localization systems. In order to rapidly deploy WLAN indoor positioning system, the crowdsourcing method is applied to alternate the traditional deployment method. In this paper, we proposed a fast radio map building method utilizing the sensors inside the mobile device and the Multidimensional Scaling (MDS) method. The crowdsourcing method collects RSS and sensor data while the user is walking along a straight line and computes the position information using the sensor data. In order to reduces the noise in the location space of the radio map, the Short Term Fourier Transform (STFT) method is used to detect the usage mode switching to improve the step determination accuracy. When building a radio map, much fewer RSS values are needed using the crowdsourcing method compared to conventional methods, which lends greater influence to noises and erroneous measurements in RSS values. Accordingly, an imprecise radio map is built based on these imprecise RSS values. In order to acquire a smoother radio map and improve the localization accuracy, the MDS method is used to infer an optimal RSS value at each location by exploiting the correlation of RSS values at nearby locations. Experimental results show that the expected goal is achieved by the proposed method.

scholarly journals Noise reduction for radio map crowdsourcing building in WLAN indoor localization system

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Liye Zhang ◽  
Zhuang Wang ◽  
Xiaoliang Meng ◽  
Chao Fang ◽  
Cong Liu
Keyword(s):  
Indoor Localization ◽  
Sensor Data ◽  
Mode Switching ◽  
Map Building ◽  
Position Information ◽  
Localization Accuracy ◽  
Localization System ◽  
Straight Line ◽  
Radio Map ◽  
Localization Systems

AbstractRecent years have witnessed a growing interest in using WLAN fingerprint-based method for indoor localization system because of its cost-effectiveness and availability compared to other localization systems. In order to rapidly deploy WLAN indoor localization system, the crowdsourcing method is applied to alternate the traditional deployment method. In this paper, we proposed a fast radio map building method utilizing the sensors inside the mobile device and the Multidimensional Scaling (MDS) method. The crowdsourcing method collects RSS and sensor data while the user is walking along a straight line and computes the position information using the sensor data. In order to reduce the noise in the location space of the radio map, the short-term Fourier transform (STFT) method is used to detect the usage mode switching to improve the step determination accuracy. When building a radio map, much fewer RSS values are needed using the crowdsourcing method compared to conventional methods, which lends greater influence to noises and erroneous measurements in RSS values. Accordingly, an imprecise radio map is built based on these imprecise RSS values. In order to acquire a smoother radio map and improve the localization accuracy, the MDS method is used to infer an optimal RSS value at each location by exploiting the correlation of RSS values at nearby locations. Experimental results show that the expected goal is achieved by the proposed method.

scholarly journals Adaptive Indoor Localization System for Large-Scale Area

IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Teerapat Vongsuteera ◽  
Kultida Rojviboonchai
Keyword(s):  
Large Scale ◽  
Indoor Localization ◽  
Localization System
Sign in / Sign up

Export Citation Format

Share Document