scholarly journals Laser-Assisted Printed Flexible Sensors: A Review

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1462 ◽  
Author(s):  
Tao Han ◽  
Anindya Nag ◽  
Nasrin Afsarimanesh ◽  
Subhas Chandra Mukhopadhyay ◽  
Sudip Kundu ◽  
...  
Keyword(s):  
Laser Ablation ◽  
3D Printing ◽  
Laser Cutting ◽  
Raw Materials ◽  
Low Cost ◽  
Market Survey ◽  
Strain Sensing ◽  
Flexible Sensors ◽  
Significant Research ◽  
Varied Range

This paper provides a substantial review of some of the significant research done on the fabrication and implementation of laser-assisted printed flexible sensors. In recent times, using laser cutting to develop printed flexible sensors has become a popular technique due to advantages such as the low cost of production, easy sample preparation, the ability to process a range of raw materials, and its usability for different functionalities. Different kinds of laser cutters are now available that work on samples very precisely via the available laser parameters. Thus, laser-cutting techniques provide huge scope for the development of prototypes with a varied range of sizes and dimensions. Meanwhile, researchers have been constantly working on the types of materials that can be processed, individually or in conjugation with one another, to form samples for laser-ablation. Some of the laser-printed techniques that are commonly considered for fabricating flexible sensors, which are discussed in this paper, include nanocomposite-based, laser-ablated, and 3D-printing. The developed sensors have been used for a range of applications, such as electrochemical and strain-sensing purposes. The challenges faced by the current printed flexible sensors, along with a market survey, are also outlined in this paper.

scholarly journals Recent Progress in 3D Printed Mold-Based Sensors

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 703 ◽  
Author(s):  
Shan He ◽  
Shilun Feng ◽  
Anindya Nag ◽  
Nasrin Afsarimanesh ◽  
Tao Han ◽  
...  
Keyword(s):  
3D Printing ◽  
Recent Progress ◽  
Raw Materials ◽  
Electronic Waste ◽  
Market Survey ◽  
Sensors And Actuators ◽  
Significant Research ◽  
Printed Sensors ◽  
3D Printed ◽  
Different Parts

The paper presents a review of some of the significant research done on 3D printed mold-based sensors performed in recent times. The utilization of the master molds to fabricate the different parts of the sensing prototypes have been followed for quite some time due to certain distinct advantages. Some of them are easy template preparation, easy customization of the developed products, quick fabrication, and minimized electronic waste. The paper explains the different kinds of sensors and actuators that have been developed using this technique, based on their varied structural dimensions, processed raw materials, designing, and product testing. These differences in the attributes were based on their individualistic application. Furthermore, some of the challenges related to the existing sensors and their possible respective solutions have also been mentioned in the paper. Finally, a market survey has been provided, stating the estimated increase in the annual growth of 3D printed sensors. It also states the type of 3D printing that has been preferred over the years, along with the range of sensors, and their related applications.

scholarly journals 3D Printing of Continuous Fiber Reinforced Low Melting Point Alloy Matrix Composites: Mechanical Properties and Microstructures

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3463
Author(s):  
Xin Wang ◽  
Xiaoyong Tian ◽  
Lixian Yin ◽  
Dichen Li
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Matrix Composite ◽  
Raw Materials ◽  
Low Cost ◽  
Metallic Matrix ◽  
Interfacial Microstructure ◽  
Fiber Reinforced ◽  
Continuous Fiber ◽  
Alloy Matrix

A novel 3D printing route to fabricate continuous fiber reinforced metal matrix composite (CFRMMC) is proposed in this paper. It is distinguished from the 3D printing process of polymer matrix composite that utilizes the pressure inside the nozzle to combine the matrix with the fiber. This process combines the metallic matrix with the continuous fiber by utilizing the wetting and wicking performances of raw materials to form the compact internal structures and proper fiber-matrix interfaces. CF/Pb50Sn50 composites were printed with the Pb50Sn50 alloy wire and modified continuous carbon fiber. The mechanical properties of the composite specimens were studied, and the ultimate tensile strength reached 236.7 MPa, which was 7.1 times that of Pb50Sn50 alloy. The fracture and interfacial microstructure were investigated and analyzed. The relationships between mechanical properties and interfacial reactions were discussed. With the optimized process parameters, several composites parts were printed to demonstrate the advantages of low cost, short fabrication period and flexibility in fabrication of complex structures.

scholarly journals Virtual Prototype and 3D Printing of Bud Chipping Machine for Agriculture

2019 ◽  
Vol 8 (12S) ◽  
pp. 880-883
Keyword(s):  
3D Printing ◽  
Raw Materials ◽  
Virtual Prototype ◽  
Literature Survey ◽  
Market Survey ◽  
Plant Products ◽  
Patent Search ◽  
Process Use ◽  
Risk Of Injury ◽  
And Training

Sugarcane is a primary crop in many parts of India. The seed or bud of the sugarcane is a part of the plant itself. Due to complicated and expensive tools, separating bud from the plant is a difficult process. Use of plant for its raw materials and products leads to loss of buds whereas planting buds with the plant leads to loss of plant products. Current machines used for sugarcane bud cutting require skill and training but are also unsafe. The risk of injury is also high. Thus, there is a need for the development of the bud chipping machine which satisfies the above criterion. The research was done by conducting a literature survey, patent search, and market survey. Designing and modeling of machine is carried out by considering aspects of design and human ergonomics. Hence, the simple and effective machine is designed which can be used to cut sugarcane buds without much effort, reduced loss of plant product, reduced muscular problems and can be safely operated.

scholarly journals Origami Lesion-Targeting Device for CT-Guided Interventions

2019 ◽  
Vol 5 (2) ◽  
pp. 23
Author(s):  
Austin Taylor ◽  
Sheng Xu ◽  
Bradford Wood ◽  
Zion Tse
Keyword(s):  
3D Printing ◽  
Minimally Invasive ◽  
Laser Cutting ◽  
Low Cost ◽  
Needle Insertion ◽  
Ct Guided ◽  
Surgical Tools ◽  
Image Guided ◽  
Radiocontrast Agent ◽  
Guided Therapy

The objective of this study is to preliminarily evaluate a lesion-targeting device for CT-guided interventions. The device is created by laser cutting the structure from a sheet of medical grade paperboard, 3D printing two radiocontrast agent grids onto the surface and folding the structure into a rectangular prism with a viewing window. An abdominal imaging phantom was used to evaluate the device through CT imaging and the targeting of lesions for needle insertion. The lesion-targeting trials resulted in a mean targeting error of 2.53 mm (SD 0.59 mm, n = 30). The device is rigid enough to adequately support standard biopsy needles, and it attaches to the patient, reducing the risk of tissue laceration by needles held rigidly in place by an external manipulator. Additional advantages include adequate support for the insertion of multiple surgical tools at once for procedures such as composite ablation and the potential to guide off-axial needle insertion. The low-cost and disposability of the device make it well-suited for the minimally invasive image-guided therapy environment.

scholarly journals Multifunctional SENSING using 3D printed CNTs/BaTiO3/PVDF nanocomposites

2018 ◽  
Vol 53 (10) ◽  
pp. 1319-1328 ◽  
Author(s):  
Hoejin Kim ◽  
Bethany R Wilburn ◽  
Edison Castro ◽  
Carlos A Garcia Rosales ◽  
Luis A Chavez ◽  
...  
Keyword(s):  
Dielectric Property ◽  
3D Printing ◽  
Large Scale ◽  
Fused Deposition Modeling ◽  
Vinylidene Fluoride ◽  
Low Cost ◽  
Multiwall Carbon Nanotubes ◽  
Strain Sensing ◽  
3D Print ◽  
Fused Deposition

This research studied multifunctional sensing capabilities on nanocomposites composed of poly(vinylidene) fluoride (PVDF), BaTiO3 (BT), and multiwall carbon nanotubes (CNTs) fabricated by fused-deposition modeling 3D printing. To improve the dielectric property within BT/PVDF composites, CNTs have been utilized to promote ultrahigh polarization density and local micro-capacitor among BT and polymer matrix. The 3D printing process provides homogeneous dispersion of nanoparticles, alleviating agglomeration of nanoparticles, and reducing micro-crack/voids in matrix which can enhance their dielectric property. In this research, we demonstrated that by utilizing unique advantages of this material combination and a 3D printing technique, sensing capabilities for temperature and strain can be engineered with different content variations of included BT and CNTs. It is observed that the sensing capability for temperature change with respect to a 25–150℃ range can be improved as both BT and CNTs’ inclusions increase and is maximal with 1.7 wt.% CNTs/60 wt.% BT/PVDF nanocomposites, while the sensing capability for strain change in a 0–20% range is maximal with 1 wt.% CNTs/12 wt.% BT/PVDF nanocomposites. In addition, it is found that the best combination for mechanical toughness is 1 wt.% CNTs/12 wt.% BT/PVDF with 24.2 MPa and 579% in ultimate tensile strength and failure strain, respectively. These results show the technique to 3D print multifunctional nanocomposites with temperature and strain sensing capabilities as well as increased mechanical property. Furthermore, this research demonstrated the feasibility for large-scale multifunctional sensor device manufacturing with freedom of design, low-cost, and an accelerated process.

scholarly journals Origami Needle Guide for CT-Guided Interventions

2018 ◽  
Author(s):  
Austin Taylor ◽  
Sheng Xu ◽  
Bradford J. Wood ◽  
Zion Tsz Ho Tse
Keyword(s):  
Standard Deviation ◽  
3D Printing ◽  
Laser Cutting ◽  
Low Cost ◽  
Needle Insertion ◽  
Ct Guided ◽  
Image Guided ◽  
Radiocontrast Agent ◽  
Horizontal Orientation ◽  
Guided Therapy

The objective of this study is to preliminarily evaluate a new CT-biopsy guidance device, an origami needle guide. The device is created by laser cutting the structure from a sheet of cardboard, 3D printing two radiocontrast agent grids on to the surface and folding the structure into a rectangular prism with a viewing window. An abdominal imaging phantom was used to evaluate the device through CT imaging and the targeting of lesions for needle insertion. The lesion targeting trials resulted in a mean targeting error of 1.88 mm with a standard deviation of 0.73 mm. The device attaches to the patient and is rigid enough to adequately support standard biopsy needles, reducing the effect of gravity and the risk of laceration by the needles, making it potentially advantageous for biopsy of superficial lesions and lesions approached from a horizontal orientation. The device supports insertion of multiple needles at once, making it particularly suitable for composite ablation using multiple needles. Another advantage of the device is that it can guide off-axial needle insertion. The low-cost and disposability of the device make it well-suited for the minimally invasive image guided therapy environment.

Bamboo Waste-based Bio-composite Substance: An application for Low-cost Construction Materials

2020 ◽  
Vol 4 (1) ◽  
pp. 41-48
Author(s):  
Teodoro Astorga Amatosa ◽  
Michael E. Loretero
Keyword(s):  
Composite Materials ◽  
Sea Water ◽  
Raw Materials ◽  
Low Cost ◽  
Construction Materials ◽  
Single Layer ◽  
High Strength ◽  
Green Technology ◽  
Experimental Medium ◽  
Natural Treatment

Bamboo is a lightweight and high-strength raw materials that encouraged researchers to investigate and explore, especially in the field of biocomposite and declared as one of the green-technology on the environment as fully accountable as eco-products. This research was to assess the technical feasibility of making single-layer experimental Medium-Density Particleboard panels from the bamboo waste of a three-year-old (Dendrocalamus asper). Waste materials were performed to produce composite materials using epoxy resin (C21H25C105) from a natural treatment by soaking with an average of pH 7.6 level of sea-water. Three different types of MDP produced, i.e., bamboo waste strip MDP (SMDP), bamboo waste chips MDP (CMDP) and bamboo waste mixed strip-chips MDP (MMDP) by following the same process. The experimental panels tested for their physical-mechanical properties according to the procedures defined by ASTM D1037-12. Conclusively, even the present study shows properties of MDP with higher and comparable to other composite materials; further research must be given better attention as potential substitute to be used as hardwood materials, especially in the production, design, and construction usage.

Low-Cost Raw Materials Synthesized Na 2.9375PS 3.9375Cl 0.0625 Solid Electrolyte

2019 ◽  
Author(s):  
Yu Wang ◽  
Nachuan Yang ◽  
Yi Shuai ◽  
Yunpeng Zhang ◽  
Kanghua Chen
Keyword(s):  
Solid Electrolyte ◽  
Raw Materials ◽  
Low Cost

Using Low Temperature, Cost-effective and Green Methods to Carbon Nanohorn Synthesis

2019 ◽  
Vol 9 (2) ◽  
pp. 157-160
Author(s):  
Ali Hasani
Keyword(s):  
Laser Ablation ◽  
Melting Point ◽  
Palm Olein ◽  
Arc Discharge ◽  
Low Cost ◽  
The Other ◽  
High Yield ◽  
Reaction Field ◽  
Carbon Nanohorns ◽  
Graphite Rod

Background: Laser ablation method has high-yield and pure SWCNHs. On the other hand, arc discharge methods have low-cost production of SWCNHs. However, these techniques have more desirable features, they need special expertness to use high power laser or high current discharge that either of them produces very high temperature. As for the researches, the temperatures of these techniques are higher than 4727°C to vaporize the graphite. So, to become aware of the advantages of SWCNHs, it is necessary to find a new way to synthesize SWCNHs at a lower temperature. In other words, reaction field can be expandable at a moderate temperature. This paper reports a new way to synthesize SWCNHs at an extremely reduced temperature. Methods: According to this study, the role of N2 is the protection of the copper holder supporting the graphite rod by increasing heat transfer from the holder. After the current of 70 A was supplied to the system, the temperature of graphite rod was raised to 1600°C. It is obvious that this temperature is somehow higher than the melting point of palladium, 1555°C, and much lower than graphite melting point, 3497°C. Results: Based on the results, there are transitional precursors simultaneous with the SWCNHs. This composition can be created by distortion of the primary SWCNTs at the higher temperature. Subsequently, each SWCNTs have a tendency to be broken into individual horns. With increasing the concentration of the free horns, bud-like SWCNHs can be produced. Moreover, there are individual horns almost separated from the mass of single wall carbon nanohorns. This structure is not common in SWCNHs synthesized by the usual method such as arc discharge or laser ablation. Through these regular techniques, SWCNHs are synthesized as cumulative particles with diameters about 30-150 nm. Conclusion: A simple heating is needed for SWCNTs transformation to SWCNHs with the presence of palladium as catalyst. The well-thought-out mechanism for this transformation is that SWCNTs were initially changed to highly curled shape, and after that were formed into small independent horns. The other rout to synthesize SWCNHs is the pyrolysis of palm olein at 950°C with the assistance of zinc nitrate and ferrocene. Palm olein was used as a promising, bio-renewable and inexpensive carbon source for the production of carbon nanohorns.

Sign in / Sign up

Export Citation Format

Share Document