scholarly journals Development and Control of a Pneumatic-Actuator 3-DOF Translational Parallel Manipulator with Robot Vision

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1459 ◽  
Author(s):  
Lian-Wang Lee ◽  
Hsin-Han Chiang ◽  
I-Hsum Li
Keyword(s):  
Feedback Linearization ◽  
Parallel Manipulator ◽  
Position Control ◽  
Sliding Mode ◽  
Vision System ◽  
Robot Vision ◽  
Degree Of Freedom ◽  
Pneumatic Actuator ◽  
Horizontal Structure ◽  
Three Degree Of Freedom

A vision-based three degree-of-freedom translational parallel manipulator (TPM) was developed. The developed TPM has the following characteristics. First, the TPM is driven by three rodless pneumatic actuators and is designed as a horizontal structure to enlarge its horizontal working space to cover a conveyor. Then, a robot-vision system (including a webcam mounted on the TPM) collects images of objects on the conveyor and transfers them through the LabVIEW application programming interface for image processing. Since it is very difficult to achieve precise position control of the TPM due to the nonlinear couplings among the robot axes, feedback linearization is utilized to design an adaptive interval type-2 fuzzy controller with self-tuning fuzzy sliding-mode compensation (AIT2FC-STFSMC) for each rodless pneumatic actuator to attenuate nonlinearities, function approximation errors, and external disturbances. Finally, experiments proved that the vision-based three degree-of-freedom TPM was capable of accurately tracking desired trajectories and precisely executing pick-and-place movement in real time.

Kinematics of a New High-Precision Three-Degree-of-Freedom Parallel Manipulator

2006 ◽  
Vol 129 (3) ◽  
pp. 320-325 ◽  
Author(s):  
Farhad Tahmasebi
Keyword(s):  
Power Dissipation ◽  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degree Of Freedom ◽  
Base Plane ◽  
Degree Polynomial ◽  
Payload Capacity ◽  
Half Angle ◽  
Three Degree Of Freedom ◽  
Direct Kinematics

Closed-form direct and inverse kinematics of a new three-degree-of-freedom (DOF) parallel manipulator with inextensible limbs and base-mounted actuators are presented. The manipulator has higher resolution and precision than the existing three-DOF mechanisms with extensible limbs. Since all of the manipulator actuators are base mounted, higher payload capacity, smaller actuator sizes, and lower power dissipation can be obtained. The manipulator is suitable for alignment applications where only tip, tilt, and piston motions are significant. The direct kinematics of the manipulator is reduced to solving an eighth-degree polynomial in the square of the tangent of the half-angle between one of the limbs and the base plane. Hence, there are at most 16 assembly configurations for the manipulator. In addition, it is shown that the 16 solutions are eight pairs of reflected configurations with respect to the base plane. Numerical examples for the direct and inverse kinematics of the manipulator are also presented.

The Optimum Kinematic Design of a Spherical Three-Degree-of-Freedom Parallel Manipulator

1989 ◽  
Vol 111 (2) ◽  
pp. 202-207 ◽  
Author(s):  
C. Gosselin ◽  
J. Angeles
Keyword(s):  
Numerical Method ◽  
Parallel Manipulator ◽  
Degree Of Freedom ◽  
Design Criteria ◽  
Kinematic Design ◽  
Three Degree Of Freedom

In this paper, the design of a spherical three-degree-of-freedom parallel manipulator is considered from a kinematic viewpoint. Three different design criteria are established and used to produce designs having optimum characteristics. These criteria are (a) symmetry (b) workspace maximization, and (c) isotropy. The associated problems are formulated and their solutions, one of them requiring to resort to a numerical method, are provided. Optimum designs are thereby obtained. A discussion on singularities is also included.

Parametric Design of a Spherical Eight-Bar Linkage Based on a Spherical Parallel Manipulator

2008 ◽  
Vol 1 (1) ◽  
Author(s):  
Gim Song Soh ◽  
J. Michael McCarthy
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Parametric Design ◽  
Degree Of Freedom ◽  
Kinematics Analysis ◽  
End Effector ◽  
Arbitrary Base ◽  
Three Degree Of Freedom ◽  
Spherical Parallel Manipulator

This paper presents a procedure that determines the dimensions of two constraining links to be added to a three degree-of-freedom spherical parallel manipulator so that it becomes a one degree-of-freedom spherical (8, 10) eight-bar linkage that guides its end-effector through five task poses. The dimensions of the spherical parallel manipulator are unconstrained, which provides the freedom to specify arbitrary base attachment points as well as the opportunity to shape the overall movement of the linkage. Inverse kinematics analysis of the spherical parallel manipulator provides a set of relative poses between all of the links, which are used to formulate the synthesis equations for spherical RR chains connecting any two of these links. The analysis of the resulting spherical eight-bar linkage verifies the movement of the system.

A new closed-form kinematics of the generalized 3-DOF spherical parallel manipulator

Robotica ◽  
1999 ◽  
Vol 17 (5) ◽  
pp. 475-485 ◽  
Author(s):  
Zhen Huang ◽  
Y. Lawrence Yao
Keyword(s):  
Closed Form ◽  
Analytical Method ◽  
Parallel Manipulator ◽  
Degree Of Freedom ◽  
New Method ◽  
Numerical Example ◽  
Three Degree Of Freedom ◽  
Spherical Parallel Manipulator

This paper presents a new method to analyze the closed-form kinematics of a generalized three-degree-of-a-freedom spherical parallel manipulator. Using this analytical method, concise and uniform solutions are achieved. Two special forms of the three-degree-of-freedom spherical parallel manipulator, i.e. right-angle type and a decoupled type, are also studied and their unique and interesting properties are investigated, followed by a numerical example.

Stable camera position control of unmanned aerial vehicle with three‐degree‐of‐freedom manipulator for visual test of bridge inspection

2019 ◽  
Vol 36 (7) ◽  
pp. 1212-1221
Author(s):  
Takahiro Ikeda ◽  
Satoshi Minamiyama ◽  
Shogo Yasui ◽  
Kenichi Ohara ◽  
Akihiko Ichikawa ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Position Control ◽  
Degree Of Freedom ◽  
Visual Test ◽  
Bridge Inspection ◽  
Aerial Vehicle ◽  
Camera Position ◽  
Three Degree Of Freedom

Kinematics of a New High Precision Three Degree-of-Freedom Parallel Manipulator

2005 ◽  
Author(s):  
Farhad Tahmasebi
Keyword(s):  
Power Dissipation ◽  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degree Of Freedom ◽  
Base Plane ◽  
Degree Polynomial ◽  
Payload Capacity ◽  
Half Angle ◽  
Three Degree Of Freedom ◽  
Direct Kinematics

Closed-form direct and inverse kinematics of a new three degree-of-freedom (DOF) parallel manipulator with inextensible limbs and base-mounted actuators are presented. The manipulator has higher resolution and precision than the existing three DOF mechanisms with extensible limbs. Since all of the manipulator actuators are base-mounted; higher payload capacity, smaller actuator sizes, and lower power dissipation can be obtained. The manipulator is suitable for alignment applications where only tip, tilt, and piston motions are significant. The direct kinematics of the manipulator is reduced to solving an eighth-degree polynomial in the square of tangent of half-angle between one of the limbs and the base plane. Hence, there are at most sixteen assembly configurations for the manipulator. In addition, it is shown that the sixteen solutions are eight pairs of reflected configurations with respect to the base plane. Numerical examples for the direct and inverse kinematics of the manipulator are also presented.

Inertial Vibration Damping Control for a Flexible Base Manipulator

2002 ◽  
Author(s):  
Lynnane E. George ◽  
Wayne J. Book
Keyword(s):  
Performance Index ◽  
Degrees Of Freedom ◽  
Position Control ◽  
Joint Space ◽  
Vibration Damping ◽  
Degree Of Freedom ◽  
Inertia Effects ◽  
Inertial Interaction ◽  
Flexible Base ◽  
Three Degree Of Freedom

A rigid (micro) robot mounted serially to the tip of a long, flexible (macro) manipulator is often used to increase reach capability, but flexibility in the macromanipulator can interfere with positioning accuracy. A rigid manipulator attached to a flexible but unactuated base was used to study a scheme to achieve positioning of the micromanipulator combined with enhanced vibration damping of the base. Inertial interaction forces and torques acting between the robot and its base were modeled and studied to determine how to use them to damp the vibration. One issue is that there are locations in the workspace where the rigid robot loses its ability to create interactions in one or more degrees of freedom. These “inertial singularities” are functions of the rigid robot’s joint variables. A performance index was developed to predict the ability of the rigid robot to damp vibration and will help ensure the robot is operating in joint space configurations favorable for inertial damping. When the performance index is used along with the appropriate choice of feedback gains, the inertia effects, or those directly due to accelerating the robot’s links, have the greatest influence on the interactions. By commanding the robot link’s accelerations out of phase with the base velocity, vibration energy will be removed from the system. This signal is then added to the rigid robot’s position control signal. Simulations of a rigid three degree of freedom anthropomorphic robot mounted on a flexible base were developed and show the effectiveness of the control scheme. In addition, experimental results demonstrating two degree of freedom vibration damping are included.

Sign in / Sign up

Export Citation Format

Share Document