scholarly journals Direct Electrochemical Detection of Glutamate, Acetylcholine, Choline, and Adenosine Using Non-Enzymatic Electrodes

Sensors ◽  
2019 ◽  
Vol 19 (3) ◽  
pp. 447 ◽  
Author(s):  
Arash Shadlaghani ◽  
Mahsa Farzaneh ◽  
Dacen Kinser ◽  
Russell C. Reid
Keyword(s):  
Catalytic Activity ◽  
Electrochemical Sensors ◽  
Low Cost ◽  
High Surface ◽  
Critical Role ◽  
Electrochemically Active ◽  
Electron Transport Properties ◽  
Metal Materials ◽  
Living Organisms ◽  
Excellent Stability

Non-electroactive neurotransmitters such as glutamate, acetylcholine, choline, and adenosine play a critical role in proper activity of living organisms, particularly in the nervous system. While enzyme-based sensing of this type of neurotransmitter has been a research interest for years, non-enzymatic approaches are gaining more attention because of their stability and low cost. Accordingly, this focused review aims to give a summary of the state of the art of non-enzymatic electrochemical sensors used for detection of neurotransmitter that lack an electrochemically active component. In place of using enzymes, transition metal materials such as those based on nickel show an acceptable level of catalytic activity for neurotransmitter sensing. They benefit from fast electron transport properties and high surface energy and their catalytic activity can be much improved if their surface is modified with nanomaterials such as carbon nanotubes and platinum nanoparticles. However, a general comparison reveals that the performance of non-enzymatic biosensors is still lower than those that use enzyme-based methods. Nevertheless, their excellent stability demonstrates that non-enzymatic neurotransmitter sensors warrant additional research in order to advance them toward becoming an acceptable replacement for the more expensive enzyme-based sensors.

Molten salts-assisted synthesis of special open-cell Fe, N co-doped porous carbon as an efficient electrocatalyst for zinc-air batteries

2021 ◽  
Author(s):  
Xiaoying Gao ◽  
Xuan Xie ◽  
Kanjun Sun ◽  
Xiaofei Lei ◽  
Tianyu Hou ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Porous Carbon ◽  
Molten Salts ◽  
Low Cost ◽  
High Catalytic Activity ◽  
Open Cell ◽  
Co Doped ◽  
Excellent Stability ◽  
Zinc Air Batteries

Fe, N co-doped carbon electrocatalyst is one of the most attractive alternatives to Pt/C catalysts due to its high catalytic activity, excellent stability and low cost. However, obtaining stable and...

scholarly journals Carbon nanomaterials: synthesis and applications to development of electrochemical sensors in determination of drugs and compounds of clinical interest

2020 ◽  
Vol 38 (3) ◽  
Author(s):  
Laís S. Porto ◽  
Daniela N. Silva ◽  
Ana Elisa F. de Oliveira ◽  
Arnaldo C. Pereira ◽  
Keyller B. Borges
Keyword(s):  
Carbon Nanomaterials ◽  
Electrochemical Sensors ◽  
Biological Fluids ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Synthesis Methods ◽  
Electrocatalytic Effect ◽  
Clinical Interest

AbstractIt is notorious that researches related to electrochemical sensors increased significantly due the promising characteristics that these devices present such as the possibility of obtaining information, with minimum manipulation of the studied system, in real time, and with low environmental impact. This article covers the carbon nanomaterials, presenting important aspects such as main properties, synthesis methods, and the application of these materials in the development of electrochemical sensors for the analysis of drugs and compounds of clinical interest. In this context, drug analysis is extremely important for quality control, to ensure that the medicine fulfills its role effectively without possible complications that could compromise the patient’s health and quality of life. In addition, analytical methods capable of determining compounds of clinical interest in biological fluids are extremely important for the indication of effective diagnoses. Thus, the versatility, selectivity, and portability of the electroanalytical techniques make the electrochemical sensors a favorite tool for the determination of drugs and compounds of clinical interest. It will be possible to follow in the present work that carbon nanomaterials have excellent thermal and electrical conductivity, strong adsorption capacity, high electrocatalytic effect, high biocompatibility, and high surface area. The possibility of formation of different composite materials based on carbonaceous nanomaterials that makes these materials promising for the development of analytical sensors, contributing to rapid, sensitive, and low-cost analyses can also be highlighted.

scholarly journals Electrochemical Biosensors Based on Nanostructured Carbon Black: A Review

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Tiago Almeida Silva ◽  
Fernando Cruz Moraes ◽  
Bruno Campos Janegitz ◽  
Orlando Fatibello-Filho
Keyword(s):  
Carbon Black ◽  
Surface Area ◽  
Electrochemical Sensors ◽  
Low Cost ◽  
High Surface ◽  
Enzymatic Catalysis ◽  
High Surface Area ◽  
Modified Electrodes ◽  
Nanostructured Material ◽  
Future Challenges

Carbon black (CB) is a nanostructured material widely used in several industrial processes. This nanomaterial features a set of remarkable properties including high surface area, high thermal and electrical conductivity, and very low cost. Several studies have explored the applicability of CB in electrochemical fields. Recent data showed that modified electrodes based on CB present fast charge transfer and high electroactive surface area, comparable to carbon nanotubes and graphene. These characteristics make CB a promising candidate for the design of electrochemical sensors and biosensors. In this review, we highlight recent advances in the use of CB as a template for biosensing. As will be seen, we discuss the main biosensing strategies adopted for enzymatic catalysis for several target analytes, such as glucose, hydrogen peroxide, and environmental contaminants. Recent applications of CB on DNA-based biosensors are also described. Finally, future challenges and trends of CB use in bioanalytical chemistry are discussed.

An Overview on Electrochemical Sensors based on Nanomaterials for Determination of Drugs of Abuse

2020 ◽  
Vol 17 ◽  
Author(s):  
Mandana Amiri ◽  
Hamideh Imanzadeh ◽  
Yasaman Sefid-Sefidehkhan
Keyword(s):  
Surface Area ◽  
Illicit Drugs ◽  
Electrochemical Sensors ◽  
Drugs Of Abuse ◽  
Low Cost ◽  
High Surface ◽  
Electrochemical Techniques ◽  
High Surface Area ◽  
Good Control ◽  
Nanocomposite Films

: Drug abuse considered a serious source of economic and social problems. The sensing of drugs of abuse is of demanding in forensic and clinical toxicology. There are many various methods for determination these materials using chromatographic and mass spectrometric techniques. Most of these techniques needs high-cost equipment, time consuming and suffer hard sample preparations. However, electrochemical methods are easy, simple and no need for complicated sample preparations cause to more interests of their use for determinations of toxics and pharmaceuticals. On the other hand, use of nanomaterials in electrochemistry found wide attentions to improve selectivity, sensitivity and limit of detections of various compounds such as pharmaceuticals, biologicals and environmental. Nanomaterials draw interests due to their low cost and unique size-dependent properties. The settling of nanomaterials into different matrices to prepare nanocomposite films founds wide interest. The unique properties of nanomaterials like mechanical, electrical, optical, catalytic and magnetic properties in addition of their significant high surface area per mass make them popular. Besides the novel properties, nanomaterials demonstrate new approaches to fabricate low cost electrodes by minimizing the materials needed and waste. The presence of nanotechnology beside modern electrochemical techniques helps to emerge of powerful, reliable electrical devices for sensing that shows benefits like increasing mass transport rate, high surface area and good control over electrode microenvironment. The aim of this review is to give an outline for the electrochemical determination based on nanomaterials of the commonly occurring illicit drugs in a various matrices such as urine, blood and saliva, which are important for determining of drugs of abuse.

scholarly journals Deployment, Calibration, and Cross-Validation of Low-Cost Electrochemical Sensors for Carbon Monoxide, Nitrogen Oxides, and Ozone for an Epidemiological Study

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4214
Author(s):  
Christopher Zuidema ◽  
Cooper S. Schumacher ◽  
Elena Austin ◽  
Graeme Carvlin ◽  
Timothy V. Larson ◽  
...  
Keyword(s):  
Carbon Monoxide ◽  
Exposure Assessment ◽  
Epidemiological Study ◽  
Electrochemical Sensors ◽  
Low Cost ◽  
Puget Sound ◽  
Ambient Air ◽  
Ambient Air Pollution ◽  
Calibration Models ◽  
Study Participants

We designed and built a network of monitors for ambient air pollution equipped with low-cost gas sensors to be used to supplement regulatory agency monitoring for exposure assessment within a large epidemiological study. This paper describes the development of a series of hourly and daily field calibration models for Alphasense sensors for carbon monoxide (CO; CO-B4), nitric oxide (NO; NO-B4), nitrogen dioxide (NO2; NO2-B43F), and oxidizing gases (OX-B431)—which refers to ozone (O3) and NO2. The monitor network was deployed in the Puget Sound region of Washington, USA, from May 2017 to March 2019. Monitors were rotated throughout the region, including at two Puget Sound Clean Air Agency monitoring sites for calibration purposes, and over 100 residences, including the homes of epidemiological study participants, with the goal of improving long-term pollutant exposure predictions at participant locations. Calibration models improved when accounting for individual sensor performance, ambient temperature and humidity, and concentrations of co-pollutants as measured by other low-cost sensors in the monitors. Predictions from the final daily models for CO and NO performed the best considering agreement with regulatory monitors in cross-validated root-mean-square error (RMSE) and R2 measures (CO: RMSE = 18 ppb, R2 = 0.97; NO: RMSE = 2 ppb, R2 = 0.97). Performance measures for NO2 and O3 were somewhat lower (NO2: RMSE = 3 ppb, R2 = 0.79; O3: RMSE = 4 ppb, R2 = 0.81). These high levels of calibration performance add confidence that low-cost sensor measurements collected at the homes of epidemiological study participants can be integrated into spatiotemporal models of pollutant concentrations, improving exposure assessment for epidemiological inference.

scholarly journals Flower-Shaped C-Dots/Co3O4{111} Constructed with Dual-Reaction Centers for Enhancement of Fenton-Like Reaction Activity and Peroxymonosulfate Conversion to Sulfate Radical

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 135
Author(s):  
Zhibin Wen ◽  
Qianqian Zhu ◽  
Jiali Zhou ◽  
Shudi Zhao ◽  
Jinnan Wang ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Active Site ◽  
High Surface ◽  
High Surface Area ◽  
Reaction Centers ◽  
Organic Radicals ◽  
The Other ◽  
High Catalytic Activity ◽  
High Adsorption ◽  
High Turnover

Novel flower-shaped C-dots/Co3O4{111} with dual-reaction centers were constructed to improve the Fenton-like reaction activity and peroxymonosulfate (PMS) conversion to sulfate radicals. Due to the exposure of a high surface area and Co3O4{111} facets, flower-shaped C-dots/Co3O4{111} could provide more Co(II) for PMS activation than traditional spherical Co3O4{110}. Meanwhile, PMS was preferred for adsorption on Co3O4{111} facets because of a high adsorption energy and thereby facilitated the electron transfer from Co(II) to PMS. More importantly, the Co–O–C linkage between C-dots and Co3O4{111} induced the formation of the dual-reaction center, which promoted the production of reactive organic radicals (R•). PMS could be directly reduced to SO4−• by R• over C-dots. On the other hand, electron transferred from R• to Co via Co–O–C linkage could accelerate the redox of Co(II)/(III), avoiding the invalid decomposition of PMS. Thus, C-dots doped on Co3O4{111} improved the PMS conversion rate to SO4−• over the single active site, resulting in high turnover numbers (TONs). In addition, TPR analysis indicated that the optimal content of C-dots doped on Co3O4{111} is 2.5%. More than 99% of antibiotics and dyes were degraded over C-dots/Co3O4{111} within 10 min. Even after six cycles, C-dots/Co3O4{111} still remained a high catalytic activity.

scholarly journals Hydrogen production from water electrolysis: role of catalysts

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Shan Wang ◽  
Aolin Lu ◽  
Chuan-Jian Zhong
Keyword(s):  
Hydrogen Production ◽  
Water Splitting ◽  
Noble Metal ◽  
Active Sites ◽  
Current Knowledge ◽  
Low Cost ◽  
Critical Role ◽  
Water Electrolysis ◽  
Efficient Production ◽  
Production Of Hydrogen

AbstractAs a promising substitute for fossil fuels, hydrogen has emerged as a clean and renewable energy. A key challenge is the efficient production of hydrogen to meet the commercial-scale demand of hydrogen. Water splitting electrolysis is a promising pathway to achieve the efficient hydrogen production in terms of energy conversion and storage in which catalysis or electrocatalysis plays a critical role. The development of active, stable, and low-cost catalysts or electrocatalysts is an essential prerequisite for achieving the desired electrocatalytic hydrogen production from water splitting for practical use, which constitutes the central focus of this review. It will start with an introduction of the water splitting performance evaluation of various electrocatalysts in terms of activity, stability, and efficiency. This will be followed by outlining current knowledge on the two half-cell reactions, hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), in terms of reaction mechanisms in alkaline and acidic media. Recent advances in the design and preparation of nanostructured noble-metal and non-noble metal-based electrocatalysts will be discussed. New strategies and insights in exploring the synergistic structure, morphology, composition, and active sites of the nanostructured electrocatalysts for increasing the electrocatalytic activity and stability in HER and OER will be highlighted. Finally, future challenges and perspectives in the design of active and robust electrocatalysts for HER and OER towards efficient production of hydrogen from water splitting electrolysis will also be outlined.

scholarly journals Synthesis of catalysts with fine platinum particles supported by high-surface-area activated carbons and optimization of their catalytic activities for polymer electrolyte fuel cells

RSC Advances ◽  
2021 ◽  
Vol 11 (33) ◽  
pp. 20601-20611
Author(s):  
Md. Mijanur Rahman ◽  
Kenta Inaba ◽  
Garavdorj Batnyagt ◽  
Masato Saikawa ◽  
Yoshiki Kato ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Polymer Electrolyte ◽  
High Performance ◽  
Activated Carbons ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Polymer Electrolyte Fuel Cells ◽  
Supported Platinum ◽  
Platinum Particles

Herein, we demonstrated that carbon-supported platinum (Pt/C) is a low-cost and high-performance electrocatalyst for polymer electrolyte fuel cells (PEFCs).

scholarly journals Effects of Annealing Temperature on the Oxygen Evolution Reaction Activity of Copper–Cobalt Oxide Nanosheets

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 657
Author(s):  
Geul Han Kim ◽  
Yoo Sei Park ◽  
Juchan Yang ◽  
Myeong Je Jang ◽  
Jaehoon Jeong ◽  
...  
Keyword(s):  
High Activity ◽  
Cobalt Oxide ◽  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Cobalt Hydroxide ◽  
Ni Foam ◽  
Electron Conduction

Developing high performance, highly stable, and low-cost electrodes for the oxygen evolution reaction (OER) is challenging in water electrolysis technology. However, Ir- and Ru-based OER catalysts with high OER efficiency are difficult to commercialize as precious metal-based catalysts. Therefore, the study of OER catalysts, which are replaced by non-precious metals and have high activity and stability, are necessary. In this study, a copper–cobalt oxide nanosheet (CCO) electrode was synthesized by the electrodeposition of copper–cobalt hydroxide (CCOH) on Ni foam followed by annealing. The CCOH was annealed at various temperatures, and the structure changed to that of CCO at temperatures above 250 °C. In addition, it was observed that the nanosheets agglomerated when annealed at 300 °C. The CCO electrode annealed at 250 °C had a high surface area and efficient electron conduction pathways as a result of the direct growth on the Ni foam. Thus, the prepared CCO electrode exhibited enhanced OER activity (1.6 V at 261 mA/cm2) compared to those of CCOH (1.6 V at 144 mA/cm2), Co3O4 (1.6 V at 39 mA/cm2), and commercial IrO2 (1.6 V at 14 mA/cm2) electrodes. The optimized catalyst also showed high activity and stability under high pH conditions, demonstrating its potential as a low cost, highly efficient OER electrode material.

scholarly journals Nanocomposite Materials Based on Electrochemically Synthesized Graphene Polymers: Molecular Architecture Strategies for Sensor Applications

Chemosensors ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 149
Author(s):  
André Olean-Oliveira ◽  
Gilberto A. Oliveira Brito ◽  
Celso Xavier Cardoso ◽  
Marcos F. S. Teixeira
Keyword(s):  
Conducting Polymers ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Electrochemical Sensors ◽  
Structural Characteristics ◽  
Low Cost ◽  
Large Specific Surface Area ◽  
Molecular Architecture ◽  
Sensor Applications

The use of graphene and its derivatives in the development of electrochemical sensors has been growing in recent decades. Part of this success is due to the excellent characteristics of such materials, such as good electrical and mechanical properties and a large specific surface area. The formation of composites and nanocomposites with these two materials leads to better sensing performance compared to pure graphene and conductive polymers. The increased large specific surface area of the nanocomposites and the synergistic effect between graphene and conducting polymers is responsible for this interesting result. The most widely used methodologies for the synthesis of these materials are still based on chemical routes. However, electrochemical routes have emerged and are gaining space, affording advantages such as low cost and the promising possibility of modulation of the structural characteristics of composites. As a result, application in sensor devices can lead to increased sensitivity and decreased analysis cost. Thus, this review presents the main aspects for the construction of nanomaterials based on graphene oxide and conducting polymers, as well as the recent efforts made to apply this methodology in the development of sensors and biosensors.

Sign in / Sign up

Export Citation Format

Share Document