scholarly journals Contactless In Situ Electrical Characterization Method of Printed Electronic Devices with Terahertz Spectroscopy

Sensors ◽  
2019 ◽  
Vol 19 (3) ◽  
pp. 444 ◽  
Author(s):  
Mariia Zhuldybina ◽  
Xavier Ropagnol ◽  
Charles Trudeau ◽  
Martin Bolduc ◽  
Ricardo Zednik ◽  
...  

Printed electronic devices are attracting significant interest due to their versatility and low cost; however, quality control during manufacturing is a significant challenge, preventing the widespread adoption of this promising technology. We show that terahertz (THz) radiation can be used for the in situ inspection of printed electronic devices, as confirmed through a comparison with conventional electrical conductivity methods. Our in situ method consists of printing a simple test pattern exhibiting a distinct signature in the THz range that enables the precise characterization of the static electrical conductivities of the printed ink. We demonstrate that contactless dual-wavelength THz spectroscopy analysis, which requires only a single THz measurement, is more precise and repeatable than the conventional four-point probe conductivity measurement method. Our results open the door to a simple strategy for performing contactless quality control in real time of printed electronic devices at any stage of its production line.

Author(s):  
Mariia Zhuldybina ◽  
Xavier Ropagnol ◽  
Charles Trudeau ◽  
Martin Bolduc ◽  
Ricardo J. Zednik ◽  
...  

Printed electronic devices are attracting significant interest due to their versatility and low cost; however, quality control during manufacturing is a significant challenge, preventing the widespread adoption of this promising technology. We show that terahertz (THz) radiation can be used for the in situ inspection of printed electronic devices, as confirmed through a comparison with conventional electrical conductivity methods. Our in situ method consists of printing a simple test pattern exhibiting a distinct signature in the THz range that enables the precise characterization of {the static} electrical conductivities of the printed ink. We demonstrate that contactless dual-wavelength THz spectroscopy analysis, which requires only a single THz measurement, is more precise and repeatable than the conventional four-point probe conductivity measurement method. Our results open the door to a simple strategy for performing contactless quality control in real time of printed electronic devices at any stage of its production line.


Author(s):  
Mariia Zhuldybina ◽  
Xavier Ropagnol ◽  
Charles Trudeau ◽  
Martin Bolduc ◽  
Ricardo J. Zednik ◽  
...  

Printed electronic devices are attracting significant interest due to their versatility and low cost; however, quality control during manufacturing is a significant challenge preventing the widespread adoption of this promising technology. We show that terahertz radiation can be used for the in-situ inspection of printed electronic devices, as confirmed through a comparison with conventional electrical conductivity methods. Our in-situ method consists in printing a simple test pattern exhibiting a distinct signature in the THz range that enables the precise characterization of electrical conductivities of the printed ink. We demonstrate that contactless dual-wavelength THz spectroscopy analysis, which requires only a single THz measurement, is more precise and repeatable than the conventional four-point probe conductivity measurement method. Our results open the door to a simple strategy for performing contactless quality control in real time of printed electronic devices at any stage of its production line.


2016 ◽  
Vol 6 (1) ◽  
Author(s):  
M. Baillergeau ◽  
K. Maussang ◽  
T. Nirrengarten ◽  
J. Palomo ◽  
L. H. Li ◽  
...  

Abstract Diffraction is the ultimate limit at which details of objects can be resolved in conventional optical spectroscopy and imaging systems. In the THz spectral range, spectroscopy systems increasingly rely on ultra-broadband radiation (extending over more 5 octaves) making a great challenge to reach resolution limited by diffraction. Here, we propose an original easy-to-implement wavefront manipulation concept to achieve ultrabroadband THz spectroscopy system with diffraction-limited resolution. Applying this concept to a large-area photoconductive emitter, we demonstrate diffraction-limited ultra-broadband spectroscopy system up to 14.5 THz with a dynamic range of 103. The strong focusing of ultrabroadband THz radiation provided by our approach is essential for investigating single micrometer-scale objects such as graphene flakes or living cells and besides for achieving intense ultra-broadband THz electric fields.


2011 ◽  
Vol 20 (03) ◽  
pp. 629-638 ◽  
Author(s):  
LEI LIU ◽  
JEFFREY L. HESLER ◽  
ROBERT M. WEIKLE ◽  
TAO WANG ◽  
PATRICK FAY ◽  
...  

We report a room temperature 570-630 GHz frequency domain terahertz (THz) spectroscopy system developed on the basis of a broadband quasi-optical zero bias Schottky diode detector. The detector is designed to cover the frequency range of 100 GHz to nearly 900 GHz. A responsivity of 300-1000 V/W has been measured, and the noise equivalent power (NEP) is estimated to be 5-20 pW/√Hz based on the measurements of similar detectors. For a prototype demonstration, the frequency domain THz spectroscopy system was operated within the region of 570-630 GHz using a VDI (Virginia Diodes, Inc.) frequency extension module (FEM) to provide the THz radiation. Mylar thin films with different thicknesses and THz metal mesh filters have been measured using this system, demonstrating a measurement accuracy of ~2%. This system has been applied to measure biomolecules in liquid-phase, and nano-material samples in solid-phase. Initial results and discussion are presented.


2013 ◽  
Vol 320 ◽  
pp. 133-137
Author(s):  
Xiao Jian Fu ◽  
Ji Zhou

Terahertz radiation refers to the electromagnetic wave whose frequency is usually defined between 0.1 and 10 THz (1 THz=1012 Hz). With the development of the emission and detection technologies of THz radiation, terahertz time-domain spectroscopy (THz-TDS) has been widely used in medical diagnosis, security inspection and materials characterization. In this paper, we introduced briefly the progress of terahertz measurement technologies, and then reviewed the applications of THz spectra in functional materials researches. As two important functional optical materials, TiO2 nanoparticles and yttrium aluminum garnet (YAG) crystal have been investigated with THz-TDS. We introduced the electron injection process in TiO2 studied by time resolved THz spectroscopy which is reported in the literature, and then presented our own work, the THz optical constants of undoped and Tm3+ doped YAG crystals.


1990 ◽  
Vol 189 ◽  
Author(s):  
A. Sanders ◽  
H. Wetzel ◽  
M. Kunst

ABSTRACTThe characterization of single crystalline silicon wafers for application in (opto)electronic devices by transient photoconductivity measurements is investigated. To this aim is the transient photoconductivity in Si wafers after different treatments determined by the Time Resolved Microwave Conductivity ( TRMC ) method. This technique is non-evasive and contactless and so in-situ measurements are possible. Application of TRMC measurements for process control and quality control of relevant process steps in the production of (opto)electronic devices is discussed in view of the experimental results presented.


Author(s):  
Jian-Shing Luo ◽  
Hsiu Ting Lee

Abstract Several methods are used to invert samples 180 deg in a dual beam focused ion beam (FIB) system for backside milling by a specific in-situ lift out system or stages. However, most of those methods occupied too much time on FIB systems or requires a specific in-situ lift out system. This paper provides a novel transmission electron microscopy (TEM) sample preparation method to eliminate the curtain effect completely by a combination of backside milling and sample dicing with low cost and less FIB time. The procedures of the TEM pre-thinned sample preparation method using a combination of sample dicing and backside milling are described step by step. From the analysis results, the method has applied successfully to eliminate the curtain effect of dual beam FIB TEM samples for both random and site specific addresses.


Author(s):  
H. Lorenz ◽  
C. Engel

Abstract Due to the continuously decreasing cell size of DRAMs and concomitantly diminishing thickness of some insulating layers new failure mechanisms appear which until now had no significance for the cell function. For example high resistance leakage paths between closely spaced conductors can lead to retention problems. These are hard to detect by electrical characterization in a memory tester because the involved currents are in the range of pA. To analyze these failures we exploit the very sensitive passive voltage contrast of the Focused Ion Beam Microscope (FIB). The voltage contrast can further be enhanced by in-situ FIB preparations to obtain detailed information about the failure mechanism. The first part of this paper describes a method to detect a leakage path between a borderless contact on n-diffusion and an adjacent floating gate by passive voltage contrast achieved after FIB circuit modification. In the second part we will demonstrate the localization of a DRAM trench dielectric breakdown. In this case the FIB passive voltage contrast technique is not limited to the localization of the failing trench. We can also obtain the depth of the leakage path by selective insitu etching with XeF2 stopped immediately after a voltage contrast change.


2019 ◽  
Author(s):  
Nikki Theofanopoulou ◽  
Katherine Isbister ◽  
Julian Edbrooke-Childs ◽  
Petr Slovák

BACKGROUND A common challenge within psychiatry and prevention science more broadly is the lack of effective, engaging, and scale-able mechanisms to deliver psycho-social interventions for children, especially beyond in-person therapeutic or school-based contexts. Although digital technology has the potential to address these issues, existing research on technology-enabled interventions for families remains limited. OBJECTIVE The aim of this pilot study was to examine the feasibility of in-situ deployments of a low-cost, bespoke prototype, which has been designed to support children’s in-the-moment emotion regulation efforts. This prototype instantiates a novel intervention model that aims to address the existing limitations by delivering the intervention through an interactive object (a ‘smart toy’) sent home with the child, without any prior training necessary for either the child or their carer. This pilot study examined (i) engagement and acceptability of the device in the homes during 1 week deployments; and (ii) qualitative indicators of emotion regulation effects, as reported by parents and children. METHODS In this qualitative study, ten families (altogether 11 children aged 6-10 years) were recruited from three under-privileged communities in the UK. The RA visited participants in their homes to give children the ‘smart toy’ and conduct a semi-structured interview with at least one parent from each family. Children were given the prototype, a discovery book, and a simple digital camera to keep at home for 7-8 days, after which we interviewed each child and their parent about their experience. Thematic analysis guided the identification and organisation of common themes and patterns across the dataset. In addition, the prototypes automatically logged every interaction with the toy throughout the week-long deployments. RESULTS Across all 10 families, parents and children reported that the ‘smart toy’ was incorporated into children’s emotion regulation practices and engaged with naturally in moments children wanted to relax or calm down. Data suggests that children interacted with the toy throughout the duration of the deployment, found the experience enjoyable, and all requested to keep the toy longer. Child emotional connection to the toy—caring for its ‘well-being’—appears to have driven this strong engagement. Parents reported satisfaction with and acceptability of the toy. CONCLUSIONS This is the first known study investigation of the use of object-enabled intervention delivery to support emotion regulation in-situ. The strong engagement and qualitative indications of effects are promising – children were able to use the prototype without any training and incorporated it into their emotion regulation practices during daily challenges. Future work is needed to extend this indicative data with efficacy studies examining the psychological efficacy of the proposed intervention. More broadly, our findings suggest the potential of a technology-enabled shift in how prevention interventions are designed and delivered: empowering children and parents through ‘child-led, situated interventions’, where participants learn through actionable support directly within family life, as opposed to didactic in-person workshops and a subsequent skills application.


Sign in / Sign up

Export Citation Format

Share Document