scholarly journals NOAA Operational Microwave Sounding Radiometer Data Quality Monitoring and Anomaly Assessment Using COSMIC GNSS Radio-Occultation Soundings

2020 ◽  
Vol 12 (5) ◽  
pp. 828
Author(s):  
Robbie Iacovazzi ◽  
Lin Lin ◽  
Ninghai Sun ◽  
Quanhua Liu
Keyword(s):  
Data Quality ◽  
Radio Occultation ◽  
Weather Prediction ◽  
Microwave Radiometer ◽  
Advanced Technology ◽  
Quality Monitoring ◽  
Radiative Transfer Model ◽  
Double Difference ◽  
Transfer Model ◽  
Microwave Sounding

National Oceanic and Atmospheric Administration (NOAA) operational Advanced Technology Microwave Sounder (ATMS) and Advanced Microwave Sounding Unit-A (AMSU-A) data used in numerical weather prediction and climate analysis are essential to protect life and property and maintain safe and efficient commerce. Routine data quality monitoring and anomaly assessment is important to sustain data effectiveness. One valuable parameter used to monitor microwave sounder data quality is the antenna temperature (Ta) difference (O-B) computed between direct instrument Ta measurements and forward radiative transfer model (RTM) brightness temperature (Tb) simulations. This requires microwave radiometer data to be collocated with atmospheric temperature and moisture sounding profiles, so that representative boundary conditions are used to produce the RTM-simulated Tb values. In this study, Constellation Observing System for Meteorology, Ionosphere, and Climate/Formosa Satellite Mission 3 (COSMIC) Global Navigation Satellite System (GNSS) Radio Occultation (RO) soundings over the ocean and equatorward of 60° latitude are used as input to the Community RTM (CRTM) to generate simulated NOAA-18, NOAA-19, Metop-A, and Metop-B AMSU-A and S-NPP and NOAA-20 ATMS Tb values. These simulated Tb values, together with observed Ta values that are nearly simultaneous in space and time, are used to compute Ta O-B statistics on monthly time scales for each instrument. In addition, the CRTM-simulated Tb values based on the COSMIC GNSS RO soundings can be used as a transfer standard to inter-compare Ta values from different microwave radiometer makes and models that have the same bands. For example, monthly Ta O-B statistics for NOAA-18 AMSU-A Channels 4–12 and NOAA-20 ATMS Channels 5–13 can be differenced to estimate the “double-difference” Ta biases between these two instruments for the corresponding frequency bands. This study reveals that the GNSS RO soundings are critical to monitoring and trending individual instrument O-B Ta biases and inter-instrument “double-difference” Ta biases and also to estimate impacts of some sensor anomalies on instrument Ta values.

scholarly journals Consistency and Stability of SNPP ATMS Microwave Observations and COSMIC-2 Radio Occultation over Oceans

2021 ◽  
Vol 13 (18) ◽  
pp. 3754
Author(s):  
Xi Shao ◽  
Shu-peng Ho ◽  
Bin Zhang ◽  
Changyong Cao ◽  
Yong Chen
Keyword(s):  
Radio Occultation ◽  
Weighting Function ◽  
Weather Prediction ◽  
Advanced Technology ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Atmospheric Profiles ◽  
Latitudinal Difference ◽  
The Stability

Radio occultation (RO) sensor measurements have critical roles in numerical weather prediction (NWP) by complementing microwave and infrared sounder measurements with information of the atmospheric profiles at high accuracy, precision, and vertical resolution. This study evaluates Constellation Observing System for Meteorology, Ionosphere, and Climate 2 (COSMIC-2) wet temperature and humidity data products’ consistency and stability through inter-comparison with SNPP advanced technology microwave sounder (ATMS) measurements. Through the community radiative transfer model (CRTM), brightness temperature (BT) at SNPP ATMS channels are simulated with COSMIC-2 retrieved atmospheric profiles from two versions of the University Corporation for Atmospheric Research (UCAR) wet profiles (WETprf and WETpf2) as inputs to the CRTM simulation. The analysis was focused on ATMS sounding channels CH07–14 and CH19–22 with sounding weighting function peak heights from 3.2 to 35 km. The COSMIC-2 vs. ATMS inter-comparison indicates that their BT biases are consistent, and the latitudinal difference is <0.3 K over three latitudinal regions. The differences between the two versions of UCAR COSMIC-2 wet profiles are identified and attributed to the differences in the implementation of 1DVAR retrieval algorithms. The stability between UCAR near real-time COSMIC-2 wet profile data and ATMS measurements is also well-maintained. It is demonstrated that the well-sustained quality of COSMIC-2 RO data makes itself a well-suited reference sensor to capture the calibration update of SNPP ATMS. Furthermore, the impacts of the assimilation of COSMIC-2 data into the European Centre for Medium-Range Weather Forecasts (ECMWF) model after 25 March 25, 2020, are evaluated by trending observation-minus-background (O-B) biases, which confirms the statistically significant positive impacts of COSMIC-2 on the ECMWF reanalysis. The validation of stability and consistency between COSMIC-2 and SNPP ATMS ensures the quality of RO and microwave sounder data assimilated into the NWP models.

scholarly journals RTTOV-gb – Adapting the fast radiative transfer model RTTOV for the assimilation of ground-based microwave radiometer observations

2016 ◽  
Author(s):  
Francesco De Angelis ◽  
Domenico Cimini ◽  
James Hocking ◽  
Pauline Martinet ◽  
Stefan Kneifel
Keyword(s):  
Radiative Transfer ◽  
Liquid Water ◽  
Weather Prediction ◽  
Microwave Radiometer ◽  
Software Tool ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
60 Ghz ◽  
Variational Assimilation ◽  
Temperature And Humidity

Abstract. Ground-based microwave radiometers (MWR) offer a new capability to provide continuous observations of the atmospheric thermodynamic state in the planetary boundary layer. Thus, they are potential candidates to supplement radiosonde network and satellite data to improve numerical weather prediction (NWP) models through a variational assimilation of their data. However in order to assimilate MWR observations a fast radiative transfer model is required and such a model is not currently available. This is necessary for going from the model state vector space to the observation space at every observation point. The fast radiative transfer model RTTOV is well accepted in the NWP community, though it was developed to simulate satellite observations only. In this work, the RTTOV code has been modified to allow for simulations of ground-based upward looking microwave sensors. In addition, the Tangent Linear, Adjoint, and K-modules of RTTOV have been adapted to provide Jacobians (i.e. the sensitivity of observations to the atmospheric thermodynamical state) for ground-based geometry. These modules are necessary for the fast minimization of the cost function in a variational assimilation scheme. The proposed ground-based version of RTTOV, called RTTOV-gb, has been validated against accurate and less time-efficient line-by-line radiative transfer models. In the frequency range commonly used for temperature and humidity profiling (22–60 GHz), root-mean-square brightness temperature differences are smaller than typical MWR uncertainties (~ 0.5 K) at all channels used in this analysis. Brightness temperatures (TB) computed with RTTOV-gb from radiosonde profiles have been compared with nearly simultaneous and colocated ground-based MWR observations. Differences between simulated and measured TB are below 0.5 K for all channels except for the water vapor band, where most of the uncertainty comes from instrumental errors. The Jacobians calculated with the K-module of RTTOV-gb have been compared with those calculated with the brute force technique and those from the line-by-line model ARTS. Jacobians are found to be almost identical, except for liquid water content Jacobians for which a 10 % difference between ARTS and RTTOV-gb at transparent channels around 450 hPa is attributed to differences in liquid water absorption models. Finally, RTTOV-gb has been applied as the forward model operator within a 1-Dimensional Variational (1D-Var) software tool in an Observing-System Simulation Experiment (OSSE). For both temperature and humidity profiles, the 1D-Var with RTTOV-gb improves the retrievals with respect to NWP model in the first few kilometers from the ground.

scholarly journals Long term Observations minus Background monitoring of ground-based microwave radiometer network. Part 1: Brightness Temperatures

2017 ◽  
Author(s):  
Francesco De Angelis ◽  
Domenico Cimini ◽  
Ulrich Löhnert ◽  
Olivier Caumont ◽  
Alexander Haefele ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Weather Prediction ◽  
Microwave Radiometer ◽  
Scale Model ◽  
Radiative Transfer Model ◽  
Line Center ◽  
High Temporal Resolution ◽  
Transfer Model ◽  
Observation Operator ◽  
Brightness Temperatures

Abstract. Ground-based microwave radiometers (MWRs) offer the capability to provide continuous, high-temporal resolution observations of the atmospheric thermodynamic state in the planetary boundary layer (PBL) with low maintenance. This makes MWR an ideal instrument to supplement radiosonde and satellite observations when initializing numerical weather prediction (NWP) models through data assimilation. State-of-the-art data assimilation systems (e.g., variational schemes) require an accurate representation of the differences between model (background) and observations, which are then weighted by their respective errors to provide the best analysis of the true atmospheric state. In this perspective, one source of information is contained in the statistics of the differences between observations and their background counterparts (O-B). Monitoring of O-B statistics is crucial to detect and remove systematic errors coming from the measurements, the observation operator, and/or the NWP model. This work illustrates a 1-year O-B analysis for MWR observations in clear sky conditions for an European-wide network of six MWRs. Observations include MWR brightness temperatures (TB) measured by the two most common types of MWR instruments. Background profiles are extracted from the French convective scale model AROME-France before being converted into TB. The observation operator used to map atmospheric profiles into TB is the fast radiative transfer model RTTOV-gb. It is shown that O-B monitoring can effectively detect instrument malfunctions. O-B statistics (bias, standard deviation and root-mean-square) for water vapor channels (22.24–30.0 GHz) are quite consistent for all the instrumental sites, decreasing from the 22.24 GHz line center (~ 2–2.5 K) towards the high-frequency wing (~ 0.8–1.3 K). Statistics for zenith and lower elevation observations show a similar trend, though values increase with increasing air mass. O-B statistics for temperature channels show different behaviour for relatively transparent (51–53 GHz) and opaque channels (54-58 GHz). Opaque channels show lower uncertainties (

scholarly journals The EUMETSAT sea ice climate record

2016 ◽  
Author(s):  
R. T. Tonboe ◽  
S. Eastwood ◽  
T. Lavergne ◽  
A. M. Sørensen ◽  
N. Rathmann ◽  
...  
Keyword(s):  
Sea Ice ◽  
Weather Prediction ◽  
Microwave Radiometer ◽  
Open Water ◽  
The Arctic ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Sea Ice Concentration ◽  
Ice Concentration ◽  
Microwave Imager

Abstract. An Arctic and Antarctic sea ice area and extent dataset has been generated by EUMETSAT's Ocean and Sea Ice Satellite Application Facility (OSISAF) using the record of American microwave radiometer data from Nimbus 7 Scanning Multichannel Microwave radiometer (SMMR) and the Defense Meteorological satellite Program (DMSP) Special Sensor Microwave/Imager (SSM/I) and Special Sensor Microwave Imager and Sounder (SSMIS) satellite sensors. The dataset covers the period from 1978 to 2014 and updates and further developments are planned for the next phase of the project. The methodology is using: 1) numerical weather prediction (NWP) input to a radiative transfer model (RTM) for correction of the brightness temperatures for reduction of atmospheric noise, 2) dynamical algorithm tie-points to mitigate trends in residual atmospheric, sea ice and water emission characteristics and inter-sensor differences/biases, 3) and a hybrid sea ice concentration algorithm using the Bristol algorithm over ice and the Bootstrap algorithm in frequency mode over open water. A new algorithm has been developed to estimate the spatially and temporally varying sea ice concentration uncertainties. A comparison to sea ice charts from the Arctic and the Antarctic shows that ice concentrations are higher in the ice charts than estimated from the radiometer data at intermediate ice concentrations. The sea ice climate dataset is available for download at (www.osisaf.org) including documentation.

scholarly journals RTTOV-gb – adapting the fast radiative transfer model RTTOV for the assimilation of ground-based microwave radiometer observations

2016 ◽  
Vol 9 (8) ◽  
pp. 2721-2739 ◽  
Author(s):  
Francesco De Angelis ◽  
Domenico Cimini ◽  
James Hocking ◽  
Pauline Martinet ◽  
Stefan Kneifel
Keyword(s):  
Radiative Transfer ◽  
Liquid Water ◽  
Weather Prediction ◽  
Microwave Radiometer ◽  
Software Tool ◽  
Liquid Water Content ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Variational Assimilation ◽  
Temperature And Humidity

Abstract. Ground-based microwave radiometers (MWRs) offer a new capability to provide continuous observations of the atmospheric thermodynamic state in the planetary boundary layer. Thus, they are potential candidates to supplement radiosonde network and satellite data to improve numerical weather prediction (NWP) models through a variational assimilation of their data. However in order to assimilate MWR observations, a fast radiative transfer model is required and such a model is not currently available. This is necessary for going from the model state vector space to the observation space at every observation point. The fast radiative transfer model RTTOV is well accepted in the NWP community, though it was developed to simulate satellite observations only. In this work, the RTTOV code has been modified to allow for simulations of ground-based upward-looking microwave sensors. In addition, the tangent linear, adjoint, and K-modules of RTTOV have been adapted to provide Jacobians (i.e., the sensitivity of observations to the atmospheric thermodynamical state) for ground-based geometry. These modules are necessary for the fast minimization of the cost function in a variational assimilation scheme. The proposed ground-based version of RTTOV, called RTTOV-gb, has been validated against accurate and less time-efficient line-by-line radiative transfer models. In the frequency range commonly used for temperature and humidity profiling (22–60 GHz), root-mean-square brightness temperature differences are smaller than typical MWR uncertainties (∼ 0.5 K) at all channels used in this analysis. Brightness temperatures (TBs) computed with RTTOV-gb from radiosonde profiles have been compared with nearly simultaneous and co-located ground-based MWR observations. Differences between simulated and measured TBs are below 0.5 K for all channels except for the water vapor band, where most of the uncertainty comes from instrumental errors. The Jacobians calculated with the K-module of RTTOV-gb have been compared with those calculated with the brute force technique and those from the line-by-line model ARTS. Jacobians are found to be almost identical, except for liquid water content Jacobians for which a 10 % difference between ARTS and RTTOV-gb at transparent channels around 450 hPa is attributed to differences in liquid water absorption models. Finally, RTTOV-gb has been applied as the forward model operator within a one-dimensional variational (1D-Var) software tool in an Observing System Simulation Experiment (OSSE). For both temperature and humidity profiles, the 1D-Var with RTTOV-gb improves the retrievals with respect to the NWP model in the first few kilometers from the ground.

scholarly journals Calibration and Validation of Antenna and Brightness Temperatures from Metop-C Advanced Microwave Sounding Unit-A (AMSU-A)

2020 ◽  
Vol 12 (18) ◽  
pp. 2978
Author(s):  
Banghua Yan ◽  
Junye Chen ◽  
Cheng-Zhi Zou ◽  
Khalil Ahmad ◽  
Haifeng Qian ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Data Quality ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Model Simulations ◽  
Calibration And Validation ◽  
Microwave Sounding Unit ◽  
Data Record ◽  
Microwave Sounding ◽  
Advanced Microwave Sounding Unit

This study carries out the calibration and validation of Antenna Temperature Data Record (TDR) and Brightness Temperature Sensor Data Record (SDR) data from the last National Oceanic and Atmospheric Administration (NOAA) Advanced Microwave Sounding Unit-A (AMSU-A) flown on the Meteorological Operational satellite programme (MetOp)-C satellite. The calibration comprises the selection of optimal space view positions for the instrument and the determination of coefficients in calibration equations from the Raw Data Record (RDR) to TDR and SDR. The validation covers the analyses of the instrument noise equivalent differential temperature (NEDT) performance and the TDR and SDR data quality from the launch until 15 November 2019. In particular, the Metop-C data quality is assessed by comparing to radiative transfer model simulations and observations from Metop-A/B AMSU-A, respectively. The results demonstrate that the on-orbit instrument NEDTs have been stable since launch and continue to meet the specifications at most channels except for channel 3, whose NEDT exceeds the specification after April 2019. The quality of the Metop-C AMSU-A data for all channels except channel 3 have been reliable since launch. The quality at channel 3 is degraded due to the noise exceeding the specification. Compared to its TDR data, the Metop-C AMSU-A SDR data exhibit a reduced and more symmetric scan angle-dependent bias against radiative transfer model simulations, demonstrating the great performance of the TDR to SDR conversion coefficients. Additionally, the Metop-C AMSU-A data quality agrees well with Metop-A/B AMSU-A data, with an averaged difference in the order of 0.3 K, which is confirmed based on Simultaneous Nadir Overpass (SNO) inter-sensor comparisons between Metop-A/B/C AMSU-A instruments via either NOAA-18 or NOAA-19 AMSU-A as a transfer.

scholarly journals A New Variational Assimilation Method Based on Gradient Information from Satellite Data

2017 ◽  
Vol 2017 ◽  
pp. 1-12
Author(s):  
Bo Zhong ◽  
Yun-Feng Wang ◽  
Gang Ma ◽  
Xin-Yuan Ma ◽  
Lu Yang
Keyword(s):  
Data Assimilation ◽  
Satellite Data ◽  
Weather Prediction ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Observation Data ◽  
Systematic Bias ◽  
Gradient Information ◽  
Information Assimilation ◽  
Microwave Sounding

With the development of meteorological observation technology, satellite data have found increasingly wide use in the numerical weather prediction field. However, there are various observational biases in satellite data, including a random bias brought about by complex weather systems and a systematic bias caused by the instrument itself, which greatly influence the quality of satellite data. A gradient information assimilation method is proposed in this paper to eliminate systematic bias. This method uses a gradient operator for gradient transformation between the model variable and observation variable and reaches the objective of eliminating systematic bias. An ideal experiment of variational data assimilation is conducted using the Community Radiative Transfer Model (CRTM) and Advanced Microwave Sounding Unit-A (AMSU-A) data, indicating that only assimilating gradient information can eliminate the smooth systematic bias in observation data. Then, a numerical simulation of tropical cyclone (TC) Megi and data assimilation experiment are conducted using the Weather Research Forecast (WRF) and WRF Data Assimilation (WRFDA) model as well as the Atmospheric Infrared Sounder (AIRS) data. The results show that the method of gradient information assimilation can improve the accuracy of TC tracks forecast and is also applicable for dealing with unreliable satellite data.

scholarly journals Assimilation of Satellite Microwave Observations over the Rainbands of Tropical Cyclones

2020 ◽  
Vol 148 (12) ◽  
pp. 4729-4745
Author(s):  
Isaac Moradi ◽  
K. Franklin Evans ◽  
Will McCarty ◽  
Marangelly Cordero-Fuentes ◽  
Ronald Gelaro ◽  
...  
Keyword(s):  
Tropical Cyclones ◽  
Microwave Radiometer ◽  
Monte Carlo Integration ◽  
Advanced Technology ◽  
Radiative Transfer Model ◽  
Small Scale ◽  
Transfer Model ◽  
Uncertainty Estimates ◽  
Satellite Microwave ◽  
The Impact

AbstractA novel Bayesian Monte Carlo integration (BMCI) technique was developed to retrieve geophysical variables from satellite microwave radiometer data in the presence of tropical cyclones. The BMCI technique includes three steps: generating a stochastic database, simulating satellite brightness temperatures using a radiative transfer model, and retrieving geophysical variables such as profiles of temperature, relative humidity, and cloud liquid and ice water content from real observations. The technique also provides uncertainty estimates for each retrieval and can output the error covariance matrix of selected parameters. The measurements from the Advanced Technology Microwave Sounder (ATMS) on board Suomi National Polar-Orbiting Partnership (Suomi NPP) and the Global Precipitation Measurement (GPM) Microwave Imager (GMI) were used as input. A new technique was developed to correct the ATMS and GMI observations for the beam-filling effect, which is due to small-scale variability of precipitation and clouds when compared with the instrument footprint and also the nonlinear relation between the brightness temperature and precipitation. In addition, the assimilation of the BMCI retrievals into the NASA GEOS model is discussed for Hurricane Maria. The results show that assimilating the BMCI retrievals can influence the dynamical features of the cyclone, including a stronger warm core, a symmetric eye, and vertically aligned wind columns. Two possible factors that may limit the impact of the BMCI retrievals include 1) the resolution of the model (about 25 km), which was too coarse to show the potential of the BMCI data in improving the representation of tropical storms in the model forecast, and 2) the data assimilation system not being able to consider vertically correlated observation errors.

scholarly journals Estimation and evaluation of COSMIC radio occultation excess phase using undifferenced measurements

2017 ◽  
Vol 10 (5) ◽  
pp. 1813-1821
Author(s):  
Pengfei Xia ◽  
Shirong Ye ◽  
Kecai Jiang ◽  
Dezhong Chen
Keyword(s):  
Radio Occultation ◽  
Weather Prediction ◽  
Lower Troposphere ◽  
Double Difference ◽  
Cosmic Radio ◽  
Processing Strategy ◽  
Single Difference ◽  
Excess Phase ◽  
Mean Square Errors ◽  
Better Than

Abstract. In the GPS radio occultation technique, the atmospheric excess phase (AEP) can be used to derive the refractivity, which is an important quantity in numerical weather prediction. The AEP is conventionally estimated based on GPS double-difference or single-difference techniques. These two techniques, however, rely on the reference data in the data processing, increasing the complexity of computation. In this study, an undifferenced (ND) processing strategy is proposed to estimate the AEP. To begin with, we use PANDA (Positioning and Navigation Data Analyst) software to perform the precise orbit determination (POD) for the purpose of acquiring the position and velocity of the mass centre of the COSMIC (The Constellation Observing System for Meteorology, Ionosphere and Climate) satellites and the corresponding receiver clock offset. The bending angles, refractivity and dry temperature profiles are derived from the estimated AEP using Radio Occultation Processing Package (ROPP) software. The ND method is validated by the COSMIC products in typical rising and setting occultation events. Results indicate that rms (root mean square) errors of relative refractivity differences between undifferenced and atmospheric profiles (atmPrf) provided by UCAR/CDAAC (University Corporation for Atmospheric Research/COSMIC Data Analysis and Archive Centre) are better than 4 and 3 % in rising and setting occultation events respectively. In addition, we also compare the relative refractivity bias between ND-derived methods and atmPrf profiles of globally distributed 200 COSMIC occultation events on 12 December 2013. The statistical results indicate that the average rms relative refractivity deviation between ND-derived and COSMIC profiles is better than 2 % in the rising occultation event and better than 1.7 % in the setting occultation event. Moreover, the observed COSMIC refractivity profiles from ND processing strategy are further validated using European Centre for Medium-Range Weather Forecasts (ECMWF) analysis data, and the results indicate that the undifferenced method reduces the noise level on the excess phase paths in the lower troposphere compared to the single-difference processing strategy.

scholarly journals All-Sky Radiance Assimilation of ATMS in HWRF: A Demonstration Study

2018 ◽  
Vol 147 (1) ◽  
pp. 85-106 ◽  
Author(s):  
Ting-Chi Wu ◽  
Milija Zupanski ◽  
Lewis D. Grasso ◽  
Christian D. Kummerow ◽  
Sid-Ahmed Boukabara
Keyword(s):  
Single Case ◽  
Control Variable ◽  
Data Availability ◽  
Advanced Technology ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
State Variables ◽  
Initial State ◽  
Clear Sky ◽  
Analysis System

Abstract Satellite all-sky radiances from the Advanced Technology Microwave Sounder (ATMS) are assimilated into the Hurricane Weather Research and Forecasting (HWRF) Model using the hybrid Gridpoint Statistical Interpolation analysis system (GSI). To extend the all-sky capability recently developed for global applications to HWRF, some modifications in HWRF and GSI are facilitated. In particular, total condensate is added as a control variable, and six distinct hydrometeor habits are added as state variables in hybrid GSI within HWRF. That is, clear-sky together with cloudy and precipitation-affected satellite pixels are assimilated using the Community Radiative Transfer Model (CRTM) as a forward operator that includes hydrometeor information and Jacobians with respect to hydrometeor variables. A single case study with the 2014 Atlantic storm Hurricane Cristobal is used to demonstrate the methodology of extending the global all-sky capability to HWRF due to ATMS data availability. Two data assimilation experiments are carried out. One experiment uses the operational configuration and assimilates ATMS radiances under the clear-sky condition, and the other experiment uses the modified HWRF system and assimilates ATMS radiances under the all-sky condition with the inclusion of total condensate update and cycling. Observed and synthetic Geostationary Operational Environmental Satellite (GOES)-13 data along with Global Precipitation Measurement Mission (GPM) Microwave Imager (GMI) data from the two experiments are used to show that the experiment with all-sky ATMS radiances assimilation has cloud signatures that are supported by observations. In contrast, there is lack of clouds in the initial state that led to a noticeable lag of cloud development in the experiment that assimilates clear-sky radiances.

Sign in / Sign up

Export Citation Format

Share Document