scholarly journals Estimation of Above-Ground Biomass over Boreal Forests on Siberia Using Updated In Situ, ALOS-2 PALSAR-2, and RADARSAT-2 Data

2018 ◽  
Vol 10 (10) ◽  
pp. 1550 ◽  
Author(s):  
Martyna Stelmaszczuk-Górska ◽  
Mikhail Urbazaev ◽  
Christiane Schmullius ◽  
Christian Thiel
Keyword(s):  
Boreal Forests ◽  
Learning Algorithm ◽  
Forest Biomass ◽  
Radar Data ◽  
Accurate Estimate ◽  
Above Ground Biomass ◽  
Ground Biomass ◽  
Multi Temporal ◽  
L Band

The estimation of above-ground biomass (AGB) in boreal forests is of special concern as it constitutes the highest carbon pool in the northern hemisphere. In particularly, monitoring of the forests in the Russian Federation is important as some regions have not been inventoried for many years. This study explores the combination of multi-frequency, multi-polarization, and multi-temporal radar data as one key approach to provide an accurate estimate of forest biomass. The data from L-band Advanced Land Observing Satellite 2 (ALOS-2) Phased Array L-Band Synthetic Aperture Radar 2 (PALSAR-2), together with C-band RADARSAT-2 data, were applied for AGB estimation. Backscatter coefficients from L- and C-band radar were used independently and in combination with a non-parametric model to retrieve AGB data for a boreal forest in Siberia (Krasnoyarskiy Kray). AGB estimation was performed using the random forests machine learning algorithm. The results demonstrated that high estimation accuracies can be achieved at a spatial resolution of 0.25 ha. When the L-band data alone were used for the retrieval, a corrected root-mean-square error (RMSEcor) of 29.4 t ha−1 was calculated. A marginal decrease in RMSEcor was observed when only the filtered L-band backscatter data, without ratio and texture, were used (29.1 t ha−1). The inclusion of the C-band data reduced the over and underestimation; the bias was reduced from 5.5 t ha−1 to 4.7 t ha−1; and a RMSEcor of 30.2 t ha−1 was calculated.

scholarly journals Benchmarking the Retrieval of Biomass in Boreal Forests Using P-Band SAR Backscatter with Multi-Temporal C- and L-Band Observations

2019 ◽  
Vol 11 (14) ◽  
pp. 1695 ◽  
Author(s):  
Cartus ◽  
Santoro ◽  
Wegmüller ◽  
Rommen
Keyword(s):  
Boreal Forests ◽  
Forest Site ◽  
Above Ground Biomass ◽  
Retrieval Accuracy ◽  
Ground Biomass ◽  
Multi Temporal ◽  
L Band ◽  
Semi Empirical ◽  
Relative Root ◽  
Band Image

The planned launch of a spaceborne P-band radar mission and the availability of C- and L-band data from several spaceborne missions suggest investigating the complementarity of C-, L-, and P-band backscatter with respect to the retrieval of forest above-ground biomass. Existing studies on the retrieval of biomass with multi-frequency backscatter relied on single observations of the backscatter and were thus not able to demonstrate the potential of multi-temporal C- and L-band data that are now available from spaceborne missions. Based on spaceborne C- and L-band and airborne P-band images acquired over a forest site in southern Sweden, we investigated whether C- and L-band backscatter may complement retrievals of above-ground biomass from P-band. To this end, a retrieval framework was adopted that utilizes a semi-empirical model for C- and L-bands and an empirical parametric model for P-band. Estimates of above-ground biomass were validated with the aid of 20 m-diameter plots and a LiDAR-derived biomass map with 100 m × 100 m pixel size. The highest retrieval accuracy when not combining frequencies was obtained for P-band with a relative root mean square error (RMSE) of 30% at the hectare scale. The retrieval with multi-temporal L- and C-bands produced errors of the order of 40% and 50%, respectively. The P-band retrieval could be improved for 4% when using P-, L-, and C-bands jointly. The combination of C- and L-bands allowed for retrieval accuracies close to those achieved with P-band. A crucial requirement for achieving an error of 30% with C- and L-bands was the use of multi-temporal observations, which was highlighted by the fact that the retrieval with the best individual L-band image was associated with an error of 61%. The results of this study reconfirmed that P-band is the most suited frequency for the retrieval of above-ground biomass of boreal forests based on backscatter, but also highlight the potential of multi-temporal C- and L-band imagery for mapping above-ground biomass, for instance in areas where the planned ESA BIOMASS P-band mission will not be allowed to acquire data.

scholarly journals Assessment of Forest above Ground Biomass Estimation Using Multi-Temporal C-band Sentinel-1 and Polarimetric L-band PALSAR-2 Data

2018 ◽  
Vol 10 (9) ◽  
pp. 1424 ◽  
Author(s):  
Xiaodong Huang ◽  
Beth Ziniti ◽  
Nathan Torbick ◽  
Mark Ducey
Keyword(s):  
Optical Sensors ◽  
Forest Canopy ◽  
Alpha Angle ◽  
Ground Truth ◽  
Biomass Estimation ◽  
Above Ground Biomass ◽  
Ground Truth Data ◽  
Ground Biomass ◽  
Multi Temporal ◽  
L Band

Synthetic Aperture Radar (SAR), as an active sensor transmitting long wavelengths, has the advantages of working day and night and without rain or cloud disturbance. It is further able to sense the geometric structure of forests more than passive optical sensors, making it a valuable tool for mapping forest Above Ground Biomass (AGB). This paper studies the ability of the single- and multi-temporal C-band Sentinel-1 and polarimetric L-band PALSAR-2 data to estimate live AGB based on ground truth data collected in New England, USA in 2017. Comparisons of results using the Simple Water Cloud Model (SWCM) on both VH and VV polarizations show that C-band reaches saturation much faster than the L-band due to its limited forest canopy penetration. The exhaustive search multiple linear regression model over the many polarimetric parameters from PALSAR-2 data shows that the combination of polarimetric parameters could slightly improve the AGB estimation, with an adjusted R2 as high as 0.43 and RMSE of around 70 Mg/ha when decomposed Pv component and Alpha angle are used. Additionally, the single- and multi-temporal C-band Sentinel-1 data are compared, which demonstrates that the multi-temporal Sentinel-1 significantly improves the AGB estimation, but still has a much lower adjusted R2 due to the limitations of the short wavelength. Finally, a site-level comparison between paired control and treatment sites shows that the L-band aligns better with the ground truth than the C-band, showing the high potential of the models to be applied to relative biomass change detection.

scholarly journals Estimation of Biomass Carbon Stocks over Peat Swamp Forests using Multi-Temporal and Multi-Polratizations SAR Data

2015 ◽  
Vol XL-7/W3 ◽  
pp. 551-556 ◽  
Author(s):  
A. Wijaya ◽  
V. Liesenberg ◽  
A. Susanti ◽  
O. Karyanto ◽  
L. V. Verchot
Keyword(s):  
Forest Structure ◽  
Strong Correlation ◽  
Carbon Stocks ◽  
Above Ground Biomass ◽  
Scattering Mechanism ◽  
Ground Biomass ◽  
Peat Swamp ◽  
Multi Temporal ◽  
L Band ◽  
Sar Data

The capability of L-band radar backscatter to penetrate through the forest canopy is useful for mapping the forest structure, including above ground biomass (AGB) estimation. Recent studies confirmed that the empirical AGB models generated from the L-band radar backscatter can provide favourable estimation results, especially if the data has dual-polarization configuration. Using dual polarimetry SAR data the backscatter signal is more sensitive to forest biomass and forest structure because of tree trunk scattering, thus showing better discriminations of different forest successional stages. These SAR approaches, however, need to be further studied for the application in tropical peatlands ecosystem We aims at estimating forest carbon stocks and stand biophysical properties using combination of multi-temporal and multi-polarizations (quad-polarimetric) L-band SAR data and focuses on tropical peat swamp forest over Kampar Peninsula at Riau Province, Sumatra, Indonesia which is one of the most peat abundant region in the country. <br><br> Applying radar backscattering (Sigma nought) to model the biomass we found that co-polarizations (HH and VV) band are more sensitive than cross-polarization channels (HV and VH). Individual HH polarization channel from April 2010 explained > 86% of AGB. Whereas VV polarization showed strong correlation coefficients with LAI, tree height, tree diameter and basal area. Surprisingly, polarimetric anisotropy feature from April 2007 SAR data show relatively high correlations with almost all forest biophysical parameters. Polarimetric anisotropy, which explains the ratio between the second and the first dominant scattering mechanism from a target has reduced at some extent the randomness of scattering mechanism, thus improve the predictability of this particular feature in estimating the forest properties. These results may be influenced by local seasonal variations of the forest as well as moisture, but available quad-pol SAR data were unable to show these patterns, since all the SAR data were acquired during the rainy season. <br><br> The results of multi-regression analysis in predicting above ground biomass shows that ALOS PALSAR data acquired in 2010 has outperformed other time series data. This is probably due to the fact that land cover change in the area from 2007 – 2009 was highly dynamic, converting natural forests into rubber and Acacia plantations, thus SAR data of 2010 which was acquired in between of two field campaigns has provided significant results (F = 40.7, P < 0.005). In general, we found that polarimetric features have improved the models performance in estimating AGB. Surprising results come from single HH polarization band from April 2010 that has a strong correlation with AGB (r = 0.863). Also, HH polarization band of 2009 SAR image resulted in a moderate correlation with AGB (r = 0.440).

scholarly journals Comparison of Capability of SAR and Optical Data in Mapping Forest above Ground Biomass Based on Machine Learning

2020 ◽  
Vol 5 (1) ◽  
pp. 13
Author(s):  
Negar Tavasoli ◽  
Hossein Arefi
Keyword(s):  
Machine Learning ◽  
Carbon Stock ◽  
Vegetation Indices ◽  
Forest Biomass ◽  
Principal Component ◽  
Optical Data ◽  
Above Ground Biomass ◽  
Ground Biomass ◽  
Texture Characteristics ◽  
Sentinel 2

Assessment of forest above ground biomass (AGB) is critical for managing forest and understanding the role of forest as source of carbon fluxes. Recently, satellite remote sensing products offer the chance to map forest biomass and carbon stock. The present study focuses on comparing the potential use of combination of ALOSPALSAR and Sentinel-1 SAR data, with Sentinel-2 optical data to estimate above ground biomass and carbon stock using Genetic-Random forest machine learning (GA-RF) algorithm. Polarimetric decompositions, texture characteristics and backscatter coefficients of ALOSPALSAR and Sentinel-1, and vegetation indices, tasseled cap, texture parameters and principal component analysis (PCA) of Sentinel-2 based on measured AGB samples were used to estimate biomass. The overall coefficient (R2) of AGB modelling using combination of ALOSPALSAR and Sentinel-1 data, and Sentinel-2 data were respectively 0.70 and 0.62. The result showed that Combining ALOSPALSAR and Sentinel-1 data to predict AGB by using GA-RF model performed better than Sentinel-2 data.

scholarly journals Integrated radar and lidar analysis reveals extensive loss of remaining intact forest on Sumatra 2007–2010

2015 ◽  
Vol 12 (22) ◽  
pp. 6637-6653 ◽  
Author(s):  
M. B. Collins ◽  
E. T. A. Mitchard
Keyword(s):  
Average Rate ◽  
Forest Biomass ◽  
Forest Monitoring ◽  
Synthetic Aperture ◽  
Lidar Data ◽  
Above Ground Biomass ◽  
Swamp Forest ◽  
L Band ◽  
Field Plots ◽  
Change Map

Abstract. Forests with high above-ground biomass (AGB), including those growing on peat swamps, have historically not been thought suitable for biomass mapping and change detection using synthetic aperture radar (SAR). However, by integrating L-band (λ = 0.23 m) SAR from the ALOS and lidar from the ICESat Earth-Observing satellites with 56 field plots, we were able to create a forest biomass and change map for a 10.7 Mha section of eastern Sumatra that still contains high AGB peat swamp forest. Using a time series of SAR data we estimated changes in both forest area and AGB. We estimate that there was 274 ± 68 Tg AGB remaining in natural forest (&amp;geq; 20 m height) in the study area in 2007, with this stock reducing by approximately 11.4 % over the subsequent 3 years. A total of 137.4 kha of the study area was deforested between 2007 and 2010, an average rate of 3.8 % yr−1. The ability to attribute forest loss to different initial biomass values allows for far more effective monitoring and baseline modelling for avoided deforestation projects than traditional, optical-based remote sensing. Furthermore, given SAR's ability to penetrate the smoke and cloud which normally obscure land cover change in this region, SAR-based forest monitoring can be relied on to provide frequent imagery. This study demonstrates that, even at L-band, which typically saturates at medium biomass levels (ca. 150 Mg ha−1), in conjunction with lidar data, it is possible to make reliable estimates of not just the area but also the carbon emissions resulting from land use change.

Synergetic use of in situ and hyperspectral data for mapping species diversity and above ground biomass in Shoolpaneshwar Wildlife Sanctuary, Gujarat

2020 ◽  
Vol 61 (1) ◽  
pp. 106-115 ◽  
Author(s):  
Ramandeep Kaur M. Malhi ◽  
Akash Anand ◽  
Ashwini N. Mudaliar ◽  
Prem C. Pandey ◽  
Prashant K. Srivastava ◽  
...  
Keyword(s):  
Species Diversity ◽  
Hyperspectral Data ◽  
Above Ground Biomass ◽  
Wildlife Sanctuary ◽  
Ground Biomass

scholarly journals Integrated radar and lidar analysis reveals extensive loss of remaining intact forest on Sumatra 2007–2010

2015 ◽  
Vol 12 (11) ◽  
pp. 8573-8614
Author(s):  
M. B. Collins ◽  
E. T. A. Mitchard
Keyword(s):  
Average Rate ◽  
Forest Biomass ◽  
Forest Monitoring ◽  
Synthetic Aperture ◽  
Lidar Data ◽  
Above Ground Biomass ◽  
Swamp Forest ◽  
L Band ◽  
Biomass Mapping ◽  
Change Map

Abstract. Forests with high above ground biomass (AGB), including those growing on peat swamps, have historically not been thought suitable for biomass mapping and change detection using Synthetic Aperture Radar (SAR). However, by integrating L-band (λ = 0.23 m) SAR with lidar data from the ALOS and ICESat earth-observing satellites respectively, and 56 forest plots, we were able to create a forest biomass and change map for a 10.7 Mha section of eastern Sumatra that still contains high AGB peat swamp forest. Using a time series of SAR data we estimated changes in both forest area and AGB. We estimate that there were 274 ± 68 Tg AGB remaining in natural forest (&amp;geq; 20 m height) in the study area in 2007, with this stock reducing by approximately 11.4% over the subsequent 3 years. A total of 137.4 kha of the study area were deforested between 2007 and 2010; an average rate of 3.8% yr−1. The ability to attribute forest loss to different initial biomass values allows for far more effective monitoring and baseline modelling for avoided deforestation projects than traditional, optical-based remote sensing. Furthermore, given SAR's ability to penetrate the smoke and cloud which normally obscure land cover change in this region, SAR-based forest monitoring can be relied on to provide frequent imagery. This study demonstrates that even at L-band, which typically saturates at medium biomass levels (ca. 150 Mg ha−1), it is possible to make reliable estimates of not just the area but the carbon emissions resulting from land use change.

Sign in / Sign up

Export Citation Format

Share Document