scholarly journals On the Design of a Safe Human-Friendly Teleoperated System for Doppler Sonography

Robotics ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 29 ◽  
Author(s):  
Sebastián Arévalo ◽  
Laribi ◽  
Zeghloul ◽  
Arsicault
Keyword(s):  
Doppler Sonography ◽  
Variable Stiffness ◽  
Ultrasound Probe ◽  
Flexible Robot ◽  
Potential Applications ◽  
Dynamic Simulator ◽  
Safety Features ◽  
Joint Variable ◽  
Variable Stiffness Actuators ◽  
Doppler Echography

Variable stiffness actuators are employed to improve the safety features of robots that share a common workspace with humans. In this paper, a study of a joint variable stiffness device developed by PPRIME Institute—called V2SOM— for implementation in the joints of a multi-DoF robot is presented. A comparison of the interaction forces produced by a rigid body robot and a flexible robot using the V2SOM is provided through a dynamic simulator of a 7-DoF robot. As an example of potential applications, robot-assisted Doppler echography is proposed, which mainly focuses on guaranteeing patient safety when the robot holding the ultrasound probe comes into contact with the patient. For this purpose, an evaluation of both joint and Cartesian control approaches is provided. The simulation results allow us to corroborate the effectiveness of the V2SOM device to guarantee human safety when it is implemented in a multi-DoF robot.

Development and analysis of a bio-inspired wire-driven variable stiffness double spring based tapered multi-section flexible robot

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Alok Ranjan Sahoo ◽  
Pavan Chakraborty
Keyword(s):  
Inverse Kinematics ◽  
Kinematic Model ◽  
Variable Stiffness ◽  
Radius Of Curvature ◽  
Flexible Robot ◽  
Content Type ◽  
Cluttered Environments ◽  
Collapsed Buildings ◽  
Practical Implications ◽  
Robot Body

Purpose The purpose of this paper is to develop a tendon actuated variable stiffness double spring based continuously tapered multi-section flexible robot and study its capability to achieve the desired bending and compression for inspection in cluttered environments. Design/methodology/approach Spring-based continuum manipulators get compressed while actuated for bending. This property can be used for the advantage in cluttered environments if one is able to control both bending and compression. Here, this paper uses a mechanics based model to achieve the desired bending and compression. Moreover, this study tries to incorporate the tapered design to help in independent actuation of the distal sections with minimal effects on proximal sections. This study is also trying to incorporate the double spring based design to minimize the number of spacers in the robot body. Findings The model was able to produce desired curvature at the tip section with less than 4.62% error. The positioning error of the manipulator is nearly 3.5% which is at par with the state-of-the-art manipulators for search and rescue operations. It was also found that the use of double spring can effectively reduce the number of spacers required. It can be helpful in smooth robot to outer world interaction without any kink. From the experiments, it has been found that the error of the kinematic model decreases as one moves from high radius of curvature to low radius of curvature. Error is maximum when the radius of curvature is infinity. Practical implications The proposed manipulator can be used for search operations in cluttered environments such as collapsed buildings and maintenance of heavy machineries in industries. Originality/value The novelty of this paper lies in the design and the proposed kinematics inverse kinematics for a spring-based continuously tapered multi-section manipulator.

scholarly journals Classification of Variable Stiffness Actuators - part 2

2017 ◽  
Vol 21 (2) ◽  
pp. 15-23
Author(s):  
Bartłomiej Kozakiewicz ◽  
Tomasz Winiarski
Keyword(s):  
Variable Stiffness ◽  
Variable Stiffness Actuators

scholarly journals Robust tracking control for two classes of variable stiffness actuators based on linear extended state observer with estimation error compensation

2020 ◽  
Vol 17 (2) ◽  
pp. 172988142091177
Author(s):  
Jishu Guo ◽  
Junmei Guo ◽  
Zhongjun Xiao
Keyword(s):  
Linear System ◽  
Tracking Control ◽  
Estimation Error ◽  
Input Saturation ◽  
Variable Stiffness ◽  
State Observer ◽  
Extended State Observer ◽  
Extended State ◽  
Linear Extended State Observer ◽  
Variable Stiffness Actuators

In this article, a novel robust tracking control scheme based on linear extended state observer with estimation error compensation is proposed for the tracking control of the antagonistic variable stiffness actuator based on equivalent nonlinear torsion spring and the serial variable stiffness actuator based on lever mechanism. For the dynamic models of these two classes of variable stiffness actuators, considering the parametric uncertainties, the unknown friction torques acting on the driving units, the unknown external disturbances acting on the output links and the input saturation constraints, an integral chain pseudo-linear system with input saturation constraints and matched lumped disturbances is established by coordinate transformation. Subsequently, the matched lumped disturbances in the pseudo-linear system are extended to the new system states, and we obtain an extended integral chain pseudo-linear system. Then, we design the linear extended state observer to estimate the unknown states of the extended pseudo-linear system. Considering the input saturation constraints in the extended pseudo-linear system and the estimation errors of the linear extended state observer with fixed preset observation gains, the adaptive input saturation compensation laws and the novel estimation error compensators are designed. Finally, a robust tracking controller based on linear extended state observer, sliding mode control, adaptive input saturation compensation laws, and estimating error compensators is designed to achieve simultaneous position and stiffness tracking control of these two classes of variable stiffness actuators. Under the action of the designed controller, the semi-global uniformly ultimately bounded stability of the closed-loop system is proved by the stability analysis of the candidate Lyapunov function. The simulation results show the effectiveness, robustness, and adaptability of the designed controller in the tracking control of these two classes of variable stiffness actuators. Furthermore, the simulation comparisons show the effectiveness of the proposed estimation error compensation measures in reducing the tracking errors and improving the disturbance rejection performance of the controller.

scholarly journals Soft Robotics with Variable Stiffness Actuators: Tough Robots for Soft Human Robot Interaction

Soft Robotics ◽  
2015 ◽  
pp. 231-254 ◽  
Author(s):  
Sebastian Wolf ◽  
Thomas Bahls ◽  
Maxime Chalon ◽  
Werner Friedl ◽  
Markus Grebenstein ◽  
...  
Keyword(s):  
Variable Stiffness ◽  
Human Robot Interaction ◽  
Soft Robotics ◽  
Robot Interaction ◽  
Variable Stiffness Actuators
Sign in / Sign up

Export Citation Format

Share Document