scholarly journals Geothermal Energy Potential in Low Enthalpy Areas as a Future Energy Resource: Identifying Feasible Targets, Quebec, Canada, Study Case

Resources ◽  
2015 ◽  
Vol 4 (3) ◽  
pp. 524-547 ◽  
Author(s):  
Jacek Majorowicz ◽  
Vasile Minea
Keyword(s):  
Geothermal Energy ◽  
Energy Resource ◽  
Energy Potential ◽  
Study Case

Heat flow in the Garibaldi volcanic belt, a possible Canadian geothermal energy resource area

1981 ◽  
Vol 18 (2) ◽  
pp. 366-375 ◽  
Author(s):  
J. F. Lewis ◽  
Alan M. Jessop
Keyword(s):  
Heat Flow ◽  
Geothermal Energy ◽  
Thermal Conduction ◽  
Energy Resource ◽  
Volcanic Belt ◽  
Geothermal Reservoir ◽  
Energy Potential ◽  
Geothermal Heat ◽  
Groundwater Movement ◽  
Uplift And Erosion

The geothermal heat flow has been determined in four boreholes drilled within the area of the Garibaldi volcanic belt of southwestern British Columbia, Canada. The program was designed to investigate a suspected geothermal reservoir and the surrounding area as part of a continuing program of the Canadian Federal Government to assess the geothermal energy potential in western Canada.The measurements, after application of corrections for sediment diffraction, topography, Pleistocene thermal history, and uplift and erosion, fall into two distinct catagories. Three of the measurements, at distances greater than 10 km from Mt. Meager, have a mean of 79 mW m−2 with a standard deviation of 10 mW m−2, and the single measurement near Mt. Meager indicates a heat flux of 132 mW m−2. All these measurements are suspect to a certain degree because of groundwater movement at and around the measurement sites. The three distant observations are similar to others in the Cordilleran thermal zone, whereas the result at Mt. Meager appears to be anomalous. This pattern suggests that near the Mt. Meager area heat is being transported by means other than simple thermal conduction, consistent with other studies that indicate the presence of a geothermal reservoir of unknown size.

Analytical solution for estimating the influence of a pre-existing ground water flow on a geothermal heat production-injection well system

2011 ◽  
Vol 2 (1) ◽  
pp. 13-17
Author(s):  
I. David ◽  
M. Visescu
Keyword(s):  
Ground Water ◽  
Water Flow ◽  
Geothermal Energy ◽  
Flow Direction ◽  
Energy Resource ◽  
Hot Water ◽  
Injection Well ◽  
Production Well ◽  
Ground Water Flow ◽  
The Earth

Abstract Geothermal energy source is the heat from the Earth, which ranges from the shallow ground (the upper 100 m of the Earth) to the hot water and hot rock which is a few thousand meters beneath the Earth's surface. In both cases the so-called open systems for geothermal energy resource exploitation consist of a groundwater production well to supply heat energy and an injection well to return the cooled water, from the heat pump after the thermal energy transfer, in the underground. In the paper an analytical method for a rapid estimation of the ground water flow direction effect on the coupled production well and injection well system will be proposed. The method will be illustrated with solutions and images for representative flow directions respect to the axis of the production/injection well system.

scholarly journals Exploring the Grid Value of Offshore Wind Energy in Oregon

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4435
Author(s):  
Travis C. Douville ◽  
Dhruv Bhatnagar
Keyword(s):  
Wind Energy ◽  
Cost Model ◽  
Energy Resource ◽  
Energy Resources ◽  
Offshore Wind ◽  
Offshore Wind Energy ◽  
Renewable Energy Resources ◽  
Energy Potential ◽  
Resource Complementarity ◽  
Wind Energy Potential

The significant offshore wind energy potential of Oregon faces several challenges, including a power grid which was not developed for the purpose of transmitting energy from the ocean. The grid impacts of the energy resource are considered through the lenses of (i) resource complementarity with Variable Renewable Energy resources; (ii) correlations with load profiles from the four balancing authorities with territory in Oregon; and (iii) spatial value to regional and coastal grids as represented through a production cost model of the Western Interconnection. The capacity implications of the interactions between offshore wind and the historical east-to-west power flows of the region are discussed. The existing system is shown to accommodate more than two gigawatts of offshore wind interconnections with minimal curtailment. Through three gigawatts of interconnection, transmission flows indicate a reduction of coastal and statewide energy imports as well as minimal statewide energy exports.

scholarly journals Sustainable Modularity Approach to Facilities Development Based on Geothermal Energy Potential

2021 ◽  
Vol 11 (6) ◽  
pp. 2691
Author(s):  
Nataša Ćuković Ignjatović ◽  
Ana Vranješ ◽  
Dušan Ignjatović ◽  
Dejan Milenić ◽  
Olivera Krunić
Keyword(s):  
Geothermal Energy ◽  
Architectural Design ◽  
Pannonian Basin ◽  
Thermal Power ◽  
Chemical Compositions ◽  
Energy Potential ◽  
Southeastern Part ◽  
Geothermal Resources ◽  
Heating And Cooling ◽  
Different Temperatures

The study presented in this paper assessed the multidisciplinary approach of geothermal potential in the area of the most southeastern part of the Pannonian basin, focused on resources utilization. This study aims to present a method for the cascade use of geothermal energy as a source of thermal energy for space heating and cooling and as a resource for balneological purposes. Two particular sites were selected—one in a natural environment; the other within a small settlement. Geothermal resources come from different types of reservoirs having different temperatures and chemical compositions. At the first site, a geothermal spring with a temperature of 20.5 °C is considered for heat pump utilization, while at the second site, a geothermal well with a temperature of 54 °C is suitable for direct use. The calculated thermal power, which can be obtained from geothermal energy is in the range of 300 to 950 kW. The development concept was proposed with an architectural design to enable sustainable energy efficient development of wellness and spa/medical facilities that can be supported by local authorities. The resulting energy heating needs for different scenarios were 16–105 kW, which can be met in full by the use of geothermal energy.

scholarly journals Deep Geothermal Heating Potential for the Communities of the Western Canadian Sedimentary Basin

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 706
Author(s):  
Jacek Majorowicz ◽  
Stephen E. Grasby
Keyword(s):  
British Columbia ◽  
Northwest Territories ◽  
Geothermal Energy ◽  
Sedimentary Basin ◽  
Electrical Power ◽  
Foreland Basin ◽  
Geothermal Gradient ◽  
Energy Potential ◽  
Western Canada Sedimentary Basin ◽  
Geothermal Heating

We summarize the feasibility of using geothermal energy from the Western Canada Sedimentary Basin (WCSB) to support communities with populations >3000 people, including those in northeastern British Columbia, southwestern part of Northwest Territories (NWT), southern Saskatchewan, and southeastern Manitoba, along with previously studied communities in Alberta. The geothermal energy potential of the WCSB is largely determined by the basin’s geometry; the sediments start at 0 m thickness adjacent to the Canadian shield in the east and thicken to >6 km to the west, and over 3 km in the Williston sub-basin to the south. Direct heat use is most promising in the western and southern parts of the WCSB where sediment thickness exceeds 2–3 km. Geothermal potential is also dependent on the local geothermal gradient. Aquifers suitable for heating systems occur in western-northwestern Alberta, northeastern British Columbia, and southwestern Saskatchewan. Electrical power production is limited to the deepest parts of the WCSB, where aquifers >120 °C and fluid production rates >80 kg/s occur (southwestern Northwest Territories, northwestern Alberta, northeastern British Columbia, and southeastern Saskatchewan. For the western regions with the thickest sediments, the foreland basin east of the Rocky Mountains, estimates indicate that geothermal power up to 2 MWel. (electrical), and up to 10 times higher for heating in MWth. (thermal), are possible.

scholarly journals Techno-Economic Simulation of a Geothermal Energy Generation System at the Machin Volcano in Colombia

2020 ◽  
Author(s):  
Hernando Enrique Rodriguez Pantano ◽  
Valentina Betancourt ◽  
Juan S. Solís-Chaves ◽  
C. M. Rocha-Osorio
Keyword(s):  
Geothermal Energy ◽  
Energy Generation ◽  
Generation System ◽  
Energy Potential ◽  
Public And Private ◽  
Mountain Ranges ◽  
Cost Of Energy ◽  
Geothermal Potential ◽  
Economic Simulation ◽  
Private Investors

Colombian geothermal potential for power generation is interesting due to the presence of the three Andean mountain ranges and the existence of active volcanoes in junction with springs and underground reservoirs with the consequent closeness of available hydrothermal water-wells. The Machin volcano is a small mountain placed in the middle of the country, that has a considerable geothermal potential with wells in a temperature range of 160 to 260C. For that reason, a techno-economic simulation for a Geothermal Energy Generation System is proposed in this paper, using for that the System Advisor Model software. The purpose of this research is to present a more encouraging picture for public and private investors interested in exploiting this energy potential in Colombia. Simulation results include technical and economic aspects as annual and monthly energy production, geothermal resource monthly average temperature, and the Time Of Delivery Factors are also considered. Some tables with system configuration, plant and pump costs, Capacity Factor, and real and nominal Levelized Cost of Energy are also shown.

Sign in / Sign up

Export Citation Format

Share Document