scholarly journals Development Strategy of Endodontic Filling Materials Based on Engineering and Medical Approaches

Processes ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 2014
Author(s):  
Leszek A. Dobrzański ◽  
Joanna Dobrzańska ◽  
Lech B. Dobrzański ◽  
Anna D. Dobrzańska-Danikiewicz ◽  
Klaudiusz Gołombek
Keyword(s):  
Development Strategy ◽  
Root Canal ◽  
Virtual Space ◽  
Endodontic Treatment ◽  
Filling Material ◽  
Root Canals ◽  
Filling Materials ◽  
Gutta Percha ◽  
Life Years ◽  
Selection Of

This article is a literature review aimed at presenting the general state of knowledge in manufacturing engineering and materials engineering to develop engineering materials applied for endodontic treatment as filling materials. Particular attention was paid to theoretical analyses concerning the selection of methods for developing and obturating root canals and discussing the results of experimental studies available in the literature. These activities aimed to compare the importance of the most commonly used endodontic filling materials based on gutta-percha or polymeric polyester materials, commonly known as resilon, respectively. The motivation to take up this complex, multi-faceted topic in this paper is the extent of caries, periodontal disease, and other oral diseases in 3 to 5 billion people, often affecting toothlessness and contributing to an increase in the index of disability-adjusted life years (number). Endodontics is an important element of the authors’ concept of Dentistry Sustainable Development (DSD) > 2020. The principles of qualifying patients for endodontic treatment are discussed. The introduction of rotary tools, especially manufactured from Nitinol alloy, to develop root canals and the latest thermohydraulic and condensation techniques for obturation guarantee progress in endodontics. The “Digital Twins” methodology was used, rooted in the idea of Industry 4.0 and the resulting idea of Dentistry 4.0, as well as knowledge management methods, to perform experimental research in virtual space, concerning methods of developing and obturating the root canal and assessing the tightness of fillings. Microscopic visualization methods were also used. Significant factors determining the effectiveness of endodontic obturation are the selection of the filling material and the appropriate obturation method. The generalized dendrological matrix of endodontic filling materials considers the criteria of mechanical strength influencing the potential root fracture and the quality of root canal filling. The results of the SWOT point analysis (strengths and weaknesses, opportunities, threats) were also compared. For both filling materials, the weaknesses are much less than the strengths, while the threats are slightly less than the opportunities for the gutta-percha-based material, while for resilon the opportunities are much smaller than the threats. It requires the application of an appropriate development strategy, i.e., MAXI-MAXI in the case of a filling material based on gutta-percha and MAXI-MINI in the case of resilon. Therefore, the analysis of these experimental data does not indicate the real competitiveness of resilon for the gutta-percha-based material. This material deservedly maintains its strong position as the “Gold Standard of Endodontics”.

scholarly journals Evaluation of Three Ni-Ti Systems in Retreatment of Curved Root Canals Obturated by Gutta-Percha With iRoot SP

2021 ◽  
Author(s):  
Yi Chen ◽  
Weiping Tian ◽  
Lisha Wang ◽  
Fan Qi ◽  
Mengyu Sun ◽  
...  
Keyword(s):  
Root Canal ◽  
Filling Material ◽  
Micro Ct ◽  
Imaging Data ◽  
Root Canals ◽  
Filling Materials ◽  
Gutta Percha ◽  
Group I ◽  
Root Canal Retreatment ◽  
Curved Root Canals

Abstract Background To evaluate the retreatability of curved root canals obturated with gutta-percha (GP) and iRoot SP using three different Ni-Ti systems through micro-computed tomographic (micro-CT) analysis. Methods A total of 51 curved root canals of permanent molars with angles of curvature ranging from 20° to 40° were used. The root canals were prepared with the ProTaper Next (PTN) rotary system to size 25, .06 taper and filled with iRoot SP and GP using the single cone technique. Samples were randomly divided into three groups (n = 17 each) according to the retreatment system used: Group I. ProTaper Universal Retreatment (PTR) system + ProTaper Next system up to PTN X2; Group II. Waveone Gold (WOG) system (WOG25); Group III. Reciproc Blue (RB) system (RB25). The ability to regain apical patency, the volume of residual filling material, and dentinal microcrack were assessed using micro-CT imaging. Data were analyzed statistically using two-way analysis of variance and chi-square test with a significance level of 5%. Results There were no significant differences among the systems tested in the reestablishment of apical patency and reduction of filling materials (P > 0.05), but RB system exhibited better reestablishment root canal ability in the upper portion of curvature and the reduction of filling materials in the apical third (P < 0.05). Intergroup analysis indicated that PTR system induced significantly more dentinal microcracks than other two systems (P < 0.05). Conclusions All three tested Ni-Ti instruments showed the similar retreatability of curved root canals obturated with gutta-percha and iRoot SP. RB system may be more effective and safer in curved root canal retreatment.

scholarly journals Effectiveness of gutta-percha and Resilon in filling lateral root canals using thermomechanical technique

2013 ◽  
Vol 42 (1) ◽  
pp. 37-41 ◽  
Author(s):  
Mário Tanomaru-Filho ◽  
Roberta Bosso ◽  
Arnaldo Sant'anna-Júnior ◽  
Fábio Luiz Camargo Villela Berbert ◽  
Juliane Maria Guerreiro-Tanomaru
Keyword(s):  
Root Canal ◽  
Lateral Root ◽  
Hybrid Technique ◽  
Filling Material ◽  
Significance Level ◽  
Root Canals ◽  
Lateral Canal ◽  
Filling Materials ◽  
Gutta Percha ◽  
Artificial Teeth

OBJECTIVE: The aim of this study was to evaluate the effectiveness of gutta-percha and Resilon in filling lateral root canals in cervical, middle, and apical third using a thermomechanical technique. MATERIAL AND METHOD: Root canals of artificial teeth were prepared using a standard preparation. The lateral canals were fabricated using a 0.3-mm-diameter bur at 3 parts of each root. By using Tagger's hybrid technique with a McSpadden thermomechanical compactor, the root canal was filled using the following filling materials: Dentsply gutta-percha, Endopoint gutta-percha, and Resilon cones. The root canal fillings were evaluated using digitized radiographs and the Image Tool software. The percentage of filled area of each lateral canal was determined. The data were subjected to analysis of variance (ANOVA) and Tukey tests at a 5% significance level. RESULT: Resilon showed better effectiveness as a filling material. When the three thirds were compared, Resilon was more effective in the apical third than in the cervical third (p < 0.05). CONCLUSION: Resilon is an effective filling material for lateral root canals using a thermomechanical technique.

scholarly journals A Comparative study to quantify the area of obturating material, sealer and voids in root canals obturated with Resilon/Epiphany and gutta-percha with different sealers

2014 ◽  
Vol 3 (1) ◽  
pp. 8-13
Author(s):  
M Vikram ◽  
N Shetty ◽  
VP Singh
Keyword(s):  
Comparative Study ◽  
Sodium Hypochlorite ◽  
Root Canal ◽  
Endodontic Treatment ◽  
Filling Material ◽  
Bonferroni Correction ◽  
Medical Sciences ◽  
Root Canals ◽  
Gutta Percha ◽  
Ah Plus

Background: Complete obturation of the root canal with an inert filling material and creation of a fluid-tight seal are among the major goals of successful endodontic treatment. Methods: Extracted mandibular premolar teeth were decoronated, prepared in a crown-down fashion and irrigated with 2.5% sodium hypochlorite and 17% EDTA. The specimens were randomly assigned into 4groups (n=10/each) and obturated with gutta-percha and Resilon/Epiphanywith different sealers. Horizontal sections were obtained of the coronal, middle and apical third at levels of 14-mm, 8-mm and 2-mm from the apex respectively and were viewed under magnification. The area of obturating material, sealer and voids were calculated using Image Jsoftware. Statistical comparisons between the Resilon and gutta-percha groups were made with Kruskal-Wallis Test and intergroup comparisions were made by Mann-Whitney U test with Bonferroni correction. Results: The results of this study showed that root canals obturated with gutta-percha or Resilon with Epiphany as sealer had significantly less area of sealer plus voids and voids alone as compared to root canals obturated with gutta-percha and AH Plus as sealer or gutta-percha and GuttaFlow. Conclusion: From the results of this study it can be concluded that methacrylate resin-based sealer Epiphany will lead to a better obturation of the root canals and adhesive sealers hold a better prospective. Nepal Journal of Medical Sciences | Volume 03 | Number 01 | January-June 2014 | Page 8-13 DOI: http://dx.doi.org/10.3126/njms.v3i1.10342

scholarly journals Is Gutta-Percha Still the “Gold Standard” among Filling Materials in Endodontic Treatment?

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1467
Author(s):  
Joanna Dobrzańska ◽  
Lech B. Dobrzański ◽  
Leszek A. Dobrzański ◽  
Klaudiusz Gołombek ◽  
Anna D. Dobrzańska-Danikiewicz
Keyword(s):  
Root Canal ◽  
Well Being ◽  
Endodontic Treatment ◽  
Whole Body ◽  
Material Research ◽  
Extensive Literature ◽  
Filling Material ◽  
Processing Technologies ◽  
Root Canals ◽  
Gutta Percha

The paper is an extensive monographic review of the literature, and also uses the results of the authors’ own experimental research illustrating the noticed developmental tendencies of the filling material based on gutta-percha. The whole body of literature proves the correctness of the research thesis that this material is the best currently that can be used in endodontics. Caries is one of the most common global infectious diseases. Since the dawn of humankind, the consequence of the disease has been the loss of dentition over time through dental extractions. Both tooth caries and tooth loss cause numerous complications and systemic diseases, which have a serious impact on insurance systems and on the well-being, quality, and length of human life. Endodontic treatment, which has been developing since 1836, is an alternative to tooth extraction. Based on an extensive literature review, the methodology of qualifying patients for endodontic treatment was analyzed. The importance of selecting filling material and techniques for the development and obturation of the root canal during endodontic treatment was described. Particular attention was paid to the materials science aspects and the sequence of phase transformations and precipitation processes, as well as the need to ensure the stoichiometric chemical composition of Ni–Ti alloys, and the vacuum metallurgical processes and material processing technologies for the effects of shape memory and superelasticity, which determine the suitability of tools made of this alloy for endodontic purposes. The phenomena accompanying the sterilization of such tools, limiting the relatively small number of times of their use, play an important role. The methods of root canal preparation and obturation methods through cold side condensation and thermoplastic methods, including the most modern of them, the thermo-hydraulic condensation (THC) technique, were analyzed. An important element of the research hypothesis was to prove the assumption that to optimize the technology of development and obturation of root canals, tests of filling effectiveness are identified by the density and size of the gaps between the root canal wall, and the filling methods used and devices appropriate for material research, using mainly microscopy such as light stereoscopic (LSM) and scanning electron (SEM). The most beneficial preparations were obtained by making a longitudinal breakthrough of 48 natural human teeth, extracted for medical reasons, different from caries, with compliance with all ethical principles in this field. The teeth were prepared using various methods and filled with multiple obturation techniques, using a virtual selection of experimental variants. The breakthroughs were made in liquid nitrogen after a one-sided incision with a narrow gap created by a diamond disc using a materialographic cutter. The best effectiveness of the root canal filling was ensured by the technology of preparing the root canals with K3 rotary nitinol tools and filling the teeth with the THC thermoplastic method using the System B and Obtura III devices with studs and pellets of filling material based on gutta-percha after covering the root canal walls with a thin layer of AH Plus sealant. In this way, the research thesis was confirmed.

scholarly journals GuttaFlow Bioseal as Monocone Obturation Technique in Curved Root Canals: A Scanning Electron Microscopy Study

2021 ◽  
Vol 15 (2) ◽  
pp. 42-59
Author(s):  
Musliana Mustaffa ◽  
◽  
Hajar Ar Rahmah Nasri ◽  
Insyirah Kamarulzaman ◽  
Mohamad Shafiq Mohd Ibrahim ◽  
...  
Keyword(s):  
Surface Area ◽  
Root Canal ◽  
Current Approach ◽  
Filling Material ◽  
Sem Images ◽  
Root Canals ◽  
Gutta Percha ◽  
Curved Root Canals ◽  
Scanning Electron ◽  
Group 1

The obturation quality of GuttaFlow Bioseal in curved root canals is not commonly investigated although there has been a current approach toward utilizing this material in extracted molars in recent years. This study assessed the obturated surface area, extrusion of root filling material beyond the apical foramen and duration of obturation procedure in curved root canals using monocone obturation technique. Access cavity was prepared in 20 human mandibular molars. Root canals with curvature of more than 10 as determined according to Schneider’s method were included. Samples were prepared using Hyflex CM rotary files and divided into two groups (n=10): Group 1 [gutta-percha cone and GuttaFlow Bioseal] and Group 2 [gutta-percha cone and RoekoSeal Automix root canal sealer]. The duration of obturation procedure was recorded and obturation radiographs were taken. Samples were bisected and the mesial roots were sectioned horizontally to obtain 3 root segments; apical, middle and coronal. All resected roots were mounted on brass stubs, sputter-coated with thin platinum coating and observed under scanning electron microscope (SEM) at 70x magnification. The SEM images were transferred to the SketchAndCalc Area Calculator software. No statistically significant differences in the obturated surface area and extrusion of root filling material were observed between Group 1 and 2, irrespective of the status of root canal curvature. Duration for obturation in severe root canal curvatures between Group 1 and 2 were statistically significant. Obturated surface area and extrusion of root filling material were not affected by the root canal curvature, however duration for obturation using GuttaFlow Bioseal in severe root canal curvatures was slightly longer.

Staining Potential of Calcium Hydroxide and Monochlorophenol Following Removal of AH26 Root Canal Sealer

2008 ◽  
Vol 9 (3) ◽  
pp. 56-63 ◽  
Author(s):  
Ali Cemal Tinaz ◽  
Baǧdagül Helvaciölu Kivanç ◽  
Güliz Gürgül
Keyword(s):  
Calcium Hydroxide ◽  
Root Canal ◽  
Filling Material ◽  
Root Canal Sealer ◽  
Tooth Structure ◽  
Root Canals ◽  
Gutta Percha ◽  
Anterior Teeth ◽  
Tooth Surfaces ◽  
Tooth Preparation

Abstract Aim The focus of this study was to examine the staining potential of calcium hydroxide (Ca(OH)2) on tooth structure following the removal of AH26 root canal sealer. Methods and Materials Fifty maxillary anterior teeth were prepared and obturated with AH26 and gutta percha. The sealers were then removed 24 hours later and the teeth were randomly divided into two groups. Ca(OH)2 was then placed in the root canals of the first group of teeth as a medicament and camphorated monochlorophenol (CMCP) was placed in the second group of teeth after the filling material was removed. The color of the external tooth surfaces was determined before tooth preparation and two weeks after the placement of the medicaments. The Z test was used for statistical analysis. Results All experimental teeth showed varying degrees of coronal discoloration with the Ca(OH)2 group showing more discoloration than the CMCP group (p<0.05). Conclusion Using Ca(OH)2 as a medicament after removing AH26 caused progressive discoloration of the teeth, whereas using CMCP caused only slight discoloration. Clinical Significance To avoid staining of the treated tooth, AH26 root canal sealer must be completely removed from the dentin walls before using a medicament. Citation Tinaz AC, Kivanç BH, Görgül G. Staining Potential of Calcium Hydroxide and Monochlorophenol Following Removal of AH26 Root Canal Sealer. J Contemp Dent Pract 2008 March; (9)3:056-063.

scholarly journals The use of bioceramic root canal sealers for obturation of the root canal system: A review

2021 ◽  
Vol 2 (1) ◽  
pp. 14-25
Author(s):  
Musliana Mustaffa
Keyword(s):  
Physicochemical Properties ◽  
Root Canal ◽  
Scientific Evidence ◽  
Filling Material ◽  
Flow Properties ◽  
Filling Materials ◽  
System A ◽  
Root Canal System ◽  
Root Canal Sealers ◽  
Selection Of

The use of bioceramic root canal sealers in endodontics is a promising approach because of the advantages such as improved flow properties, biocompatible and could promote the formation of hard tissue. Due to the recent technology and limited scientific evidence, the effectiveness of bioceramic root canal sealers remains unclear. This article focuses on the physicochemical properties, biocompatibility, biomineralisation, retreatability, 3D obturation and current practice of using bioceramic root canal sealers. The relevant articles for this review were searched manually from Google Scholar and PubMed using keywords ‘bioceramic root filling material AND endodontics’, ‘bioceramic root canal sealers AND endodontics’, ‘cytotoxicity AND bioceramic root canal sealers’, ‘bioceramic root canal sealers AND physicochemical properties’, ‘biomineralisation AND bioceramic root canal sealers’ and ‘retreatment efficacy AND bioceramic root filling materials’. Since the clinical data concerning the obturation with bioceramic root canal sealers is lacking, the selection of materials should be made based on the available scientific evidence, individual cases, material availability and operator’s preference.

scholarly journals What Are the Chances of Resilon to Dominate the Market Filling Materials for Endodontics?

Metals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1744
Author(s):  
Joanna Dobrzańska ◽  
Lech B. Dobrzański ◽  
Leszek A. Dobrzański ◽  
Anna D. Dobrzańska-Danikiewicz ◽  
Klaudiusz Gołombek
Keyword(s):  
Root Canal ◽  
Swot Analysis ◽  
Experimental Studies ◽  
Filling Material ◽  
Human Teeth ◽  
Research Results ◽  
Filling Materials ◽  
Common Trade ◽  
Selection Of

This paper is a literature review with additional virtual analyses of the authors’ own experimental research results. Knowledge from various areas was synergistically combined, appropriately for concurrent engineering, presenting several possible methodological approaches used in research, optimizing the selection of engineering materials and the conditions of their application with particular application in endodontics. Particular attention was paid to the theoretical aspects of filling material strengths, weaknesses, opportunities, and threats SWOT analysis. Attention was paid to the original concepts of Sustainable Dentistry Development in conjunction with Dentistry 4.0, which includes endodontics as an important element. The dentists’ actions, among others, in conservative dentistry, along with endodontics, requires close cooperation with engineers and the enginering sciences. Methods of root canal preparation were described, together with selected tools, including those made of nitinol. Principles concerning the process of cleaning and shaping the pulp complex are presented. The importance of obturation methods, including the Thermo-Hydraulic-Condensation THC technique, and the selection of filling materials with the necessary sealants for the success of endodontic treatment are discussed. The experimental studies were carried out in vitro on human teeth removed for medical reasons, except for caries, for which two groups of 16 teeth were separated. After the root canal was prepared, it was filled with studs and pellets of a filling material based on polyester materials, which has gained the common trade name of resilon or, less frequently, RealSeal (SybronEndo) with an epiphany sealant. The teeth for the first group were obturated by cold lateral condensation. In the second case the obturation was performed using the Thermo-Hydraulic-Condensation technique using System B and Obtura III. The experimental leakage testing was done using a scanning electron microscope SEM and a light stereoscopic microscope LSM, as typical research tools used in materialography. The research results, in a confrontation with the data taken from the literature studies, do not indicate the domination of resilon in endodontics.

scholarly journals Radiographic and scanning electron microscopic assessment of root canal filling remnants after endodontic re-instrumentation

2017 ◽  
Vol 20 (1) ◽  
pp. 80 ◽  
Author(s):  
Luciane Geanini Pena Santos ◽  
Wilson Tadeu Felippe ◽  
Beatriz Dulcineia Mendes Souza ◽  
Andrea Cristina Konrath ◽  
Mabel Mariela Rodríguez Cordeiro ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Root Canal ◽  
Filling Material ◽  
Root Canal Filling ◽  
Root Canals ◽  
Filling Materials ◽  
Ah Plus ◽  
Endodontic Retreatment ◽  
Scanning Electron

<p><strong>Objective: </strong>Failures in endodontic treatment may occur by several reasons. Endodontic retreatment is an interesting alternative to manage this clinical problem. However, it is not possible to completely remove the root canal filling by any current retreatment technique. The aim of this study was to evaluate the presence of residual root canal filling materials after endodontic re-instrumentation. <strong>Material and Methods:</strong> Sixty extracted anterior human teeth were prepared by step-back technique with Flexofiles, K-files and Gates-Glidden (GG) burs. Between the use of each file or bur, root canals were irrigated with sodium hypochlorite (NaOCl). Smear layer was removed by irrigation with ethylenediaminetetraacetic acid and NaOCl. After drying with paper points the root canals were randomly divided into 5 groups (n = 12), according to filling material: Resilon cones/Real Seal sealer or gutta-percha cones and Endofill, Sealapex, AH Plus or MTA Fillapex sealers. After one week, root canal fillings were removed using Eucaliptol and K-files. Root canals were re-instrumented with K-files and GG burs sized larger than the first ones. The removal of root canal filling material was analyzed by radiography and scanning electron microscopy (SEM). Statistical analysis was performed using Binary Logistic Regression test (P &lt; 0.05). <strong>Results: </strong>Radiographic and SEM analysis showed that material from the<strong> </strong>MTA Fillapex group was better removed than that from Endofill, Sealapex, AH Plus and Real Seal groups. <strong>Conclusion: </strong>After re-instrumentation<strong>, </strong>MTA Fillapex group showed less remnants into the root canals than Endofill, Sealapex, AH Plus and Real Seal groups. Residual material was most often found in the apical third.</p><p><strong>Keywords </strong></p><p>Dental radiography; Endodontic retreatment; Root canal filling materials; Scanning electron microscopy.</p>

scholarly journals In vitro evaluation of apical microleakage using different root-end filling materials

2006 ◽  
Vol 14 (1) ◽  
pp. 49-52 ◽  
Author(s):  
Márcia Carneiro Valera ◽  
Carlos Henrique Ribeiro Camargo ◽  
Alessandra Sverberi Carvalho ◽  
Eduardo Ramalho Pereira Gama
Keyword(s):  
Zinc Oxide ◽  
Root Apex ◽  
Tissue Fluid ◽  
Filling Material ◽  
Human Teeth ◽  
Root Canals ◽  
Filling Materials ◽  
Gutta Percha ◽  
Significant Difference

The objective of this study was to evaluate the apical leakage of retrograde cavities filled with Portland Cement (Concrebrás S/A-MG-Brazil), ProRoot MTA TM (Dentsply International, Johnson City, TN, USA) and Sealapex (Kerr Corporation, Orange, California, USA) with addition of zinc oxide (Odahcam Herpo Produtos Dentários Ltda, Rio de Janeiro, RJ, Brazil). Forty-two extracted single-rooted human teeth were decoronated and used for this study. The root canals were instrumented at 1.0mm short of the apical foramen using the step-back technique to an apical ISO size 60. The roots were obturated with gutta-percha points and sealer Sealapex (Kerr Corporation-USA) and then 3mm of each root apex was sectioned at a 90° angle. Ultrasonic retrograde preparation was performed with a diamond tip to 3mm depth and the roots were randomly divided into 3 groups according to the filling material: G1-Portland, G2-ProRoot MTA, G3- Sealapex zinc oxide-added cement. The root surfaces were covered with nail varnish up to 2mm from the apical foramen, immersed in simulated tissue fluid for 30 days, and then immersed in 0.2% Rhodamine B solution for 24 hours for evaluation of marginal leakage. The results showed mean leakage of 0.75, 0.35 and 0.35 for groups 1, 2 and 3, respectively; however, Kruskal-Wallis test revealed that there was no statistically significant difference among the results (p>0.05).

Sign in / Sign up

Export Citation Format

Share Document