scholarly journals Effects of Different Mixture Ratios of Methanol-Diesel on the Performance Enhancement and Emission Reduction for a Diesel Engine

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1366
Author(s):  
Zhiqing Zhang ◽  
Jie Tian ◽  
Jiangtao Li ◽  
Hongchen Ji ◽  
Dongli Tan ◽  
...  
Keyword(s):  
Carbon Monoxide ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Negative Impact ◽  
Specific Fuel Consumption ◽  
Emission Characteristic ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Cylinder Pressure ◽  
Mixed Fuel

To improve the combustion and emission characteristics of diesel engines, methanol-diesel fuels with different mixing ratios (DM0, DM10, DM20, DM30, and DM40) were used to investigate the effects of methanol addition on the combustion and emission of a four-stroke diesel engine in terms of cylinder pressure, brake power, brake-specific fuel consumption, and nitrogen oxides, soot, and carbon monoxide emissions. Firstly, an improved entire diesel engine model was developed using AVL-BOOST software and validated by the experimental results. The results showed that the increase of methanol content in the fuel mixture had a negative impact on the performance characteristic of the diesel engine, but significantly improved the emission characteristic of the diesel engine. With the methanol ratio in the mixed fuel increased to 10%, 20%, 30%, and 40%, the cylinder pressure of the engine increased by 0.89%, 1.48%, 2.29%, and 3.17%, respectively. However, the power decreased by 3.76%, 6.74%, 11.35%, and 15.45%, the torque decreased by 3.76%, 6.74%, 11.35%, and 15.45%, respectively, and the brake specific fuel consumption increased by 3.77%, 6.92%, 12.33%, and 17.61%, respectively. In addition, with the methanol ratio in the mixed fuel increased to 10%, 20%, 30%, and 40%, the carbon monoxide emission decreased by 21.32%, 39.04%, 49.81%, and 56.59% and the soot emission decreased by 0.25%, 8.69%, 16.81%, and 25.28%, respectively. Therefore, the addition of methanol to the fuel can improve the combustion and emission characteristics of the engine.

scholarly journals An Assessment on Performance Characteristics of Diesel Engine Using Lemongrass-Diesel Oil Fuel Blends

2021 ◽  
Author(s):  
Naveen Rana ◽  
Harikrishna Nagwan ◽  
Kannan Manickam
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Performance Characteristics ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Fuel Blends

Abstract Indeed, the development of alternative fuels for use in internal combustion engines has become an essential requirement to meet the energy demand and to deal with the different problems related to fuel. The research in this domain leads to the identification of adverse fuel properties and for their solution standard limits are being defined. This paper outlines an investigation of performance and combustion characteristics of a 4-stroke diesel engine using different cymbopogon (lemongrass) - diesel fuel blends. 10% to 40% cymbopogon is mixed with diesel fuel and tested for performance characteristics like brake specific fuel consumption and brake thermal efficiency. To obtain emission characteristics smoke density in the terms of HSU has been measured. In result, it has observed that there is an increase of 5% in brake thermal efficiency and 16.33% decrease in brake specific fuel consumption. Regarding emission characteristics, a 12.9% decrease in smoke emission has been found.

scholarly journals Effects of Different Biodiesel-Diesel Blend Fuel on Combustion and Emission Characteristics of a Diesel Engine

Processes ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 1984
Author(s):  
Yanhui Zhang ◽  
Yunhao Zhong ◽  
Jie Wang ◽  
Dongli Tan ◽  
Zhiqing Zhang ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Combustion Process ◽  
Kinetic Mechanism ◽  
Alternative Fuel ◽  
Specific Fuel Consumption ◽  
Biodiesel Fuel ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Blend Fuel

In this paper, biodiesel was used as an alternative fuel to investigate the combustion and emission characteristics of a four-stroke diesel engine, in terms of cylinder pressure, heat release rate, cylinder temperature, brake thermal efficiency, brake specific fuel consumption, nitrogen oxide, soot, carbon monoxide, and hydrocarbon. Firstly, a diesel engine cylinder model was developed by AVL-Fire software coupled with CHEMKIN code to simulate the injection and combustion of biodiesel with a kinetic mechanism with 106 species and 263 reactions. Then, the simulation model was validated by experimental results under 100% and 50% load conditions and used to simulate the combustion process of a diesel engine fueled with pure diesel, biodiesel, and biodiesel–diesel blends with 10%, 20%, 30% biodiesel by volume, respectively. The results showed that the brake specific fuel consumption increased with the increase of mixed biodiesel ratio. The brake specific fuel consumptions of B10, B20 and B30 increased by 1.1%, 2.3% and 3.3%, respectively, compared with that of D100. The combustion and emission characteristics of the diesel engine are improved. Therefore, biodiesel can be used as an alternative fuel for the diesel engine. The diesel–biodiesel fuel can improve the combustion and emission characteristics of the diesel engine.

scholarly journals Effects of Different Diesel-Ethanol Dual Fuel Ratio on Performance and Emission Characteristics of Diesel Engine

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1135
Author(s):  
Zhiqing Zhang ◽  
Jiangtao Li ◽  
Jie Tian ◽  
Guangling Xie ◽  
Dongli Tan ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Combustion Process ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Cylinder Pressure ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Blended Fuel ◽  
Engine Power

In this paper, a four-stroke engine diesel was employed to investigate the effects of different fuel mixture ratios of diesel and ethanol on engine performance and emission characteristics in terms of cylinder temperature, heat release rate, brake power, brake thermal efficiency, brake specific fuel consumption, and cylinder pressure. The corresponding simulation model of diesel engine was developed by AVL-Fire coupled CHEMKIN code, and an improved chemical kinetics mechanism containing 34 reactions and 19 species was employed to simulate the fuel spray process and combustion process. The simulation model was validated by experimental results under 100% and 50% load conditions and used to simulate the combustion process of diesel engine fueled with pure diesel and diesel–ethanol blends with 10%, 20%, and 30% ethanol by volume, respectively. The results showed that the increase of ethanol content in the blended fuel had a certain negative impact on the performance characteristic of diesel engine and significantly improved the emission characteristic of the engine. With the ethanol proportion in the blended fuel increased to 10%, 20%, and 30%, the brake thermal efficiency of the engine increased by 2.24%, 4.33%, and 6.37% respectively. However, the brake-specific fuel consumption increased by 1.56%, 3.49%, and 5.74% and the power decreased by 1.58%, 3.46%, and 5.54% respectively. In addition, with the ethanol proportion in the blended fuel increased to 10%, 20%, and 30%, the carbon monoxide emission decreased by 34.69%, 47.60%, and 56.58%, and the soot emission decreased by 7.83%, 15.24%, and 22.52% respectively. Finally, based on the combining fuzzy and grey correlation theory, nitrogen oxide emission has the highest correlation with engine power and brake-specific fuel consumption. The values reach 0.9103 and 0.8945 respectively. It shows that nitrogen oxide emission and cylinder pressure have a significant relationship on engine power and brake-specific fuel consumption.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

scholarly journals EXPERIMENTAL ANALYSIS OF THE COMBUSTION CHAMBER COATED WITH Mo AND Al2O3-TiO2 IN A DIESEL ENGINE

2021 ◽  
Vol 55 (4) ◽  
Author(s):  
Murugan Kuppusamy ◽  
Thirumalai Ramanathan ◽  
Udhayakumar Krishnavel ◽  
Seenivasan Murugesan
Keyword(s):  
Combustion Chamber ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Performance Test ◽  
Ceramic Powder ◽  
Specific Fuel Consumption ◽  
Emission Characteristic ◽  
Powder Materials ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency

The effect of thermal-barrier coatings (TBCs) reduces fuel consumption, effectively improving the engine efficiency. This research focused on a TBC with a thickness of 300 µm insulating the combustion chamber of a direct ignition (DI) engine. The piston crown, inlet and exhaust-valve head were coated using air-plasma-spray coating. Ceramic powder materials such as molybdenum (Mo) and aluminum oxide titanium dioxide (Al2O3-TiO2) were used. A performance test of the engine with the coated combustion chamber was carried out to investigate the brake power, brake thermal efficiency, volumetric efficiency, brake specific fuel consumption and air-fuel ratio. Also, an emission-characteristic test was carried out to investigate the emissions of unburned hydrocarbon (HC), carbon monoxide (CO), nitrogen oxides (NO, NO2, NO3) and smoke opacity (SO). The results reveal that the brake thermal efficiency and brake specific fuel consumption show significant increases because of these coating materials. The effect of the Al2O3-TiO2 coating significantly reduces the HC and CO engine emissions.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

The Comparative Trail Research on the Performance of a Diesel Engine Fuelled with Diesel Fuel and Biodiesel/Diesel Blended Fuel

2011 ◽  
Vol 142 ◽  
pp. 103-106
Author(s):  
Wen Ming Cheng ◽  
Hui Xie ◽  
Gang Li
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Series Of Experiments ◽  
Blended Fuel ◽  
Load Conditions

This paper discusses the brake specific fuel consumption and brake thermal efficiency of a diesel engine using cottonseed biodiesel blended with diesel fuel. A series of experiments were conducted for the various blends under varying load conditions at a speed of 1500 rpm and 2500 rpm and the results were compared with the neat diesel. From the results, it is found that the brake specific fuel consumption of cottonseed biodiesel is slightly higher than that of diesel fuel at different engine loads and speeds, with this increase being higher the higher the percentage of the biodiesel in the blend. And the brake thermal efficiency of cottonseed biodiesel is nearly similar to that of diesel fuel at different engine loads and speeds. From the investigation, it is concluded that cottonseed biodiesl can be directly used in diesel engines without any modifications, at least in small blending ratios.

PFI Retrofit-Kit as Green Technology for Small 4-Stroke S.I. Engine

2013 ◽  
Vol 315 ◽  
pp. 453-457 ◽  
Author(s):  
Mohd Faisal Hushim ◽  
Ahmad Jais Alimin ◽  
Hazlina Selamat ◽  
Mohd Taufiq Muslim
Keyword(s):  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Fuel Consumption ◽  
Gasoline Engine ◽  
Green Technology ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Effective Pressure ◽  
Brake Power ◽  
Brake Mean Effective Pressure

This paper presents outcomes of the usage of a developed prototype of PFI retrofit-kit for small 4-stroke gasoline engine. The developed PFI retrofit-kit produced good and high brake power and brake mean effective pressure compared to the carburetor system with over 50% improvement. Exhaust-out emissions such as carbon monoxide, carbon dioxide and hydrocarbon have been reduced in the range of 39%, 185%, and 57% respectively. However, brake specific fuel consumption was found to be higher (125%) as compared to carburetor system.

The Study on the Top Clearance Plunger Pump in Diesel Engine

2013 ◽  
Vol 805-806 ◽  
pp. 1755-1758
Author(s):  
Jie Zhong Zhang ◽  
Qing Ping Zheng
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
High Speed ◽  
Simulation Method ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Plunger Pump ◽  
Fuel Supply ◽  
Oil Pump

The simulation method was used to study the fuel supply and injection characteristics of diesel top clearance plunger pump. The results show that the top clearance plunger pump relative advance of fuel supply is larger than that of the traditional plunger, and it can achieve the purpose of injection advance when the oil pump operate at 600~1000rpm. Through optimizing the structure of top clearance plunger, the amount of the injection advance can become larger and the advanced range of speed is increased. After optimized, the BSFC (Brake Specific Fuel Consumption) is 4.3% lower than that before when the diesel engine matched the top clearance plunger, which shows its advantage especially in working at high-speed.

scholarly journals Performance, Emissions and Durability Studies on Diesel Engine Fuelled with a Preheated Raw Microalgal Oil

Proceedings ◽  
2020 ◽  
Vol 58 (1) ◽  
pp. 4
Author(s):  
Hassan M Attar ◽  
Dawei Wu ◽  
Adam P Harvey
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Specific Fuel Consumption ◽  
Critical Parameters ◽  
Significant Finding ◽  
Brake Specific Fuel Consumption ◽  
Gas Temperature ◽  
Durability Test ◽  
Microalgal Oil ◽  
Brake Power

Preheated Schizochytrium sp. raw microalgae oil (MAO) was evaluated as a fuel in a single-cylinder four-stroke diesel engine to produce a comparative study of MAO and diesel oil (DO) critical parameters. In particular, brake power, brake specific fuel consumption (BSFC), brake thermal efficiency (BTE), in-cylinder pressure (CP), exhaust gas temperature (EGT), both nitrogen oxides (NOx) and carbon monoxide (CO) emissions were investigated. Additionally, an engine durability test for longevity was undertaken over a 30-h period, using raw MAO as the fuel. The study demonstrated that the preheated MAO could be successfully used in a diesel engine smoothly. The use of MAO reduced the engine brake power by 26% and increased brake-specific fuel consumption by 20%. The most significant finding from this research study is that there was a significant reduction in NOx and CO emission by 42% and 60% when using raw MAO, respectively. Therefore, these findings demonstrate that algae oil is a highly credible fuel for use in diesel engines and offers a promising solution to diesel engine emissions.

Sign in / Sign up

Export Citation Format

Share Document