scholarly journals Performance, Emissions and Durability Studies on Diesel Engine Fuelled with a Preheated Raw Microalgal Oil

Proceedings ◽  
2020 ◽  
Vol 58 (1) ◽  
pp. 4
Author(s):  
Hassan M Attar ◽  
Dawei Wu ◽  
Adam P Harvey
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Specific Fuel Consumption ◽  
Critical Parameters ◽  
Significant Finding ◽  
Brake Specific Fuel Consumption ◽  
Gas Temperature ◽  
Durability Test ◽  
Microalgal Oil ◽  
Brake Power

Preheated Schizochytrium sp. raw microalgae oil (MAO) was evaluated as a fuel in a single-cylinder four-stroke diesel engine to produce a comparative study of MAO and diesel oil (DO) critical parameters. In particular, brake power, brake specific fuel consumption (BSFC), brake thermal efficiency (BTE), in-cylinder pressure (CP), exhaust gas temperature (EGT), both nitrogen oxides (NOx) and carbon monoxide (CO) emissions were investigated. Additionally, an engine durability test for longevity was undertaken over a 30-h period, using raw MAO as the fuel. The study demonstrated that the preheated MAO could be successfully used in a diesel engine smoothly. The use of MAO reduced the engine brake power by 26% and increased brake-specific fuel consumption by 20%. The most significant finding from this research study is that there was a significant reduction in NOx and CO emission by 42% and 60% when using raw MAO, respectively. Therefore, these findings demonstrate that algae oil is a highly credible fuel for use in diesel engines and offers a promising solution to diesel engine emissions.

The Performance of a Common Rail Diesel Engine Fueled with Different Blending Ratio of Biodiesels at Different Altitudes

2013 ◽  
Vol 860-863 ◽  
pp. 1685-1689
Author(s):  
Ze Fei Tan ◽  
Li Zhong Shen ◽  
De Cai Jin ◽  
Yang Wen Bin Ou
Keyword(s):  
High Pressure ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Common Rail ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Gas Temperature ◽  
Engine Power ◽  
High Pressure Common Rail

To study the effect of the biodiesel on the performance of the high pressure common rail diesel engine performance, a experiment is conducted about the high pressure common rail diesel engine uses diesel fuel and different blending ratio of biodiesels. The results show that with the rising of the altitude, the engine power and the brake specific fuel consumption reduce, exhaust gas temperature increases; At the same altitude, the engine fueled with different blending ratio of bio-diesel has higher brake specific fuel consumption in comparison with fueled engine, but it has lower power, with the increase in bio-diesel blending ratio, engine power, fuel consumption increase.

scholarly journals Effects of Specific Fuel Consumption and Exhaust Emissions of Four Stroke Diesel Engine with CuO/Water Nanofluid as Coolant

2017 ◽  
Vol 64 (1) ◽  
pp. 111-121 ◽  
Author(s):  
S. Senthilraja ◽  
KCK. Vijayakumar ◽  
R. Gangadevi
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Load Condition ◽  
Exhaust Emissions ◽  
Cuo Nanoparticles ◽  
Specific Fuel Consumption ◽  
Gas Temperature ◽  
Step Method ◽  
Series Of Experiments ◽  
Exhaust Gas Temperature

Abstract This article reports the effects of CuO/water based coolant on specific fuel consumption and exhaust emissions of four stroke single cylinder diesel engine. The CuO nanoparticles of 27 nm were used to prepare the nanofluid-based engine coolant. Three different volume concentrations (i.e 0.05%, 0.1%, and 0.2%) of CuO/water nanofluids were prepared by using two-step method. The purpose of this study is to investigate the exhaust emissions (NOx), exhaust gas temperature and specific fuel consumption under different load conditions with CuO/water nanofluid. After a series of experiments, it was observed that the CuO/water nanofluids, even at low volume concentrations, have a significant influence on exhaust emissions. The experimental results revealed that, at full load condition, the specific fuel consumption was reduced by 8.6%, 15.1% and 21.1% for the addition of 0.05%, 0.1% and 0.2% CuO nanoparticles with water, respectively. Also, the emission tests were concluded that 881 ppm, 853 ppm and 833 ppm of NOx emissions were observed at high load with 0.05%, 0.1% and 0.2% volume concentrations of CuO/water nanofluids, respectively.

Performance of a Compression-Ignition Engine Fueled with Diesel/Biodiesel Blends

2015 ◽  
Vol 730 ◽  
pp. 283-286
Author(s):  
Rong Fu Zhu ◽  
Yun Long Wang ◽  
Hui Wang ◽  
Yuan Tao Sun
Keyword(s):  
Fuel Consumption ◽  
Specific Fuel Consumption ◽  
Experimental Results ◽  
Nox Emission ◽  
Brake Specific Fuel Consumption ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Biodiesel Blends ◽  
Brake Power ◽  
Fuel Delivery

The performance of engine fueled with diesel/biodiesel blends was tested. It was indicated from the experimental results that the brake power, torque out and brake specific fuel consumption of engine fueled with diesel/biodiesel caused slight variations, while NOx emission increased significantly compared with engine fueled with diesel. In order to reduce NOx emission of engine fueled with pure biodiesel, retarding fuel delivery advance angle was used, and the NOx emission tests revealed that the NOx emission decreased significantly at different engine speeds.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

The Comparative Trail Research on the Performance of a Diesel Engine Fuelled with Diesel Fuel and Biodiesel/Diesel Blended Fuel

2011 ◽  
Vol 142 ◽  
pp. 103-106
Author(s):  
Wen Ming Cheng ◽  
Hui Xie ◽  
Gang Li
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Series Of Experiments ◽  
Blended Fuel ◽  
Load Conditions

This paper discusses the brake specific fuel consumption and brake thermal efficiency of a diesel engine using cottonseed biodiesel blended with diesel fuel. A series of experiments were conducted for the various blends under varying load conditions at a speed of 1500 rpm and 2500 rpm and the results were compared with the neat diesel. From the results, it is found that the brake specific fuel consumption of cottonseed biodiesel is slightly higher than that of diesel fuel at different engine loads and speeds, with this increase being higher the higher the percentage of the biodiesel in the blend. And the brake thermal efficiency of cottonseed biodiesel is nearly similar to that of diesel fuel at different engine loads and speeds. From the investigation, it is concluded that cottonseed biodiesl can be directly used in diesel engines without any modifications, at least in small blending ratios.

scholarly journals An Assessment on Performance Characteristics of Diesel Engine Using Lemongrass-Diesel Oil Fuel Blends

2021 ◽  
Author(s):  
Naveen Rana ◽  
Harikrishna Nagwan ◽  
Kannan Manickam
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Performance Characteristics ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Fuel Blends

Abstract Indeed, the development of alternative fuels for use in internal combustion engines has become an essential requirement to meet the energy demand and to deal with the different problems related to fuel. The research in this domain leads to the identification of adverse fuel properties and for their solution standard limits are being defined. This paper outlines an investigation of performance and combustion characteristics of a 4-stroke diesel engine using different cymbopogon (lemongrass) - diesel fuel blends. 10% to 40% cymbopogon is mixed with diesel fuel and tested for performance characteristics like brake specific fuel consumption and brake thermal efficiency. To obtain emission characteristics smoke density in the terms of HSU has been measured. In result, it has observed that there is an increase of 5% in brake thermal efficiency and 16.33% decrease in brake specific fuel consumption. Regarding emission characteristics, a 12.9% decrease in smoke emission has been found.

Experimental Evaluation of Cooking Oil (Carotene Oil) as Biodiesel Blended on Compression Ignition (CI) Engine

2011 ◽  
Vol 110-116 ◽  
pp. 2234-2238
Author(s):  
A.R. Norwazan ◽  
A.K. Zulkiffli ◽  
M.S. Abd Rahim
Keyword(s):  
Fuel Consumption ◽  
Power Output ◽  
Alternative Fuels ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Compression Ignition ◽  
Cooking Oil ◽  
Brake Power ◽  
Ci Engine ◽  
Biodiesel Blend

Biodiesel is an alternative fuels for diesel engine with the blending process by chemically combination of vegetable or animal oil and diesel fuels. It is proved that the biodiesel can be used without any modification on the compression ignition (CI) engine. In this study, the cooking oil of namely carotene is used to produce the biodiesel blend fuels in various percentages. The biodiesel blend and diesel fuel are evaluated to analyze the engine performances in 4 cylinder inline CI engine. The characteristics of engine performances namely brake power output and brake specific fuel consumption are measured with various loads applied. The fuel properties of biodiesel blend are investigated namely density, dynamics viscosity and kinetic viscosity. The experimental results show that the performance of biodiesel B10 is better than it counterpart namely diesel in terms of brake power output and brake specific fuel consumption (BSFC).

scholarly journals Use of Gasoline, LPG and LPG-HHO Blend in SI Engine: A Comparative Performance for Emission Control and Sustainable Environment

Processes ◽  
2020 ◽  
Vol 8 (1) ◽  
pp. 74 ◽  
Author(s):  
Muhammad Usman ◽  
Muhammad Farooq ◽  
Muhammad Naqvi ◽  
Muhammad Wajid Saleem ◽  
Jafar Hussain ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Alternative Fuels ◽  
Environmental Pollutants ◽  
Spark Ignition Engine ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Liquefied Petroleum Gas ◽  
Comparative Performance ◽  
Performance And Emission ◽  
Brake Power

The rising global warming concerns and explosive degradation of the environment requires the mainstream utilization of alternative fuels, such as hydroxy gas (HHO) which presents itself as a viable substitute for extracting the benefits of hydrogen. Therefore, an experimental study of the performance and emission characteristics of alternative fuels in contrast to conventional gasoline was undertaken. For experimentation, a spark ignition engine was run on a multitude of fuels comprising of gasoline, Liquefied petroleum gas (LPG) and hybrid blend of HHO with LPG. The engine was operated at 60% open throttle with engine speed ranging from 1600 rpm to 3400 rpm. Simultaneously, the corresponding performance parameters including brake specific fuel consumption, brake power and brake thermal efficiency were investigated. Emission levels of CO, CO2, HC and NOx were quantified in the specified speed range. To check the suitability of the acquired experimental data, it was subjected to a Weibull distribution fit. Enhanced performance efficiency and reduced emissions were observed with the combustion of the hybrid mixture of LPG with HHO in comparison to LPG: on average, brake power increased by 7% while the brake specific fuel consumption reduced by 15%. On the other hand, emissions relative to LPG decreased by 21%, 9% and 21.8% in cases of CO, CO2, and unburned hydrocarbons respectively. Incorporating alternative fuels would not only imply reduced dependency on conventional fuels but would also contribute to their sustainability for future generations. Simultaneously, the decrease in harmful environmental pollutants would help to mitigate and combat the threats of climate change.

PFI Retrofit-Kit as Green Technology for Small 4-Stroke S.I. Engine

2013 ◽  
Vol 315 ◽  
pp. 453-457 ◽  
Author(s):  
Mohd Faisal Hushim ◽  
Ahmad Jais Alimin ◽  
Hazlina Selamat ◽  
Mohd Taufiq Muslim
Keyword(s):  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Fuel Consumption ◽  
Gasoline Engine ◽  
Green Technology ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Effective Pressure ◽  
Brake Power ◽  
Brake Mean Effective Pressure

This paper presents outcomes of the usage of a developed prototype of PFI retrofit-kit for small 4-stroke gasoline engine. The developed PFI retrofit-kit produced good and high brake power and brake mean effective pressure compared to the carburetor system with over 50% improvement. Exhaust-out emissions such as carbon monoxide, carbon dioxide and hydrocarbon have been reduced in the range of 39%, 185%, and 57% respectively. However, brake specific fuel consumption was found to be higher (125%) as compared to carburetor system.

scholarly journals An Experimental Study on the Performance Characteristics of a Diesel Engine Fueled with ULSD-Biodiesel Blends

2020 ◽  
Vol 10 (2) ◽  
pp. 183-190
Author(s):  
Viet Dung Tran ◽  
Anh Tuan Le ◽  
Anh Tuan Hoang
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Cooling System ◽  
Specific Fuel Consumption ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Brake Thermal Efficiency ◽  
Exhaust Gas Temperature ◽  
Low Sulfur

As a rule, the highest permissible sulfur content in the marine fuel must drop below 0.5% from 1 January 2020 for global fleets. As such, ships operating in emission control areas must use low sulfur or non-sulfur fuel to limit sulfur emissions as a source of acid rain. However, that fact has revealed two challenges for the operating fleet: the very high cost of ultra-low sulfur diesel (ULSD) and the installation of the fuel conversion system and the ULSD cooling system. Therefore, a solution that blends ULSD and biodiesel (BO) into a homogeneous fuel with properties equivalent to that of mineral fuels is considered to be significantly effective. In the current work, an advanced ultrasonic energy blending technology has been applied to assist in the production of homogeneous ULSD-BO blends (ULSD, B10, B20, B30, and B50 with blends of coconut oil methyl ester with ULSD of 10%, 20%, 30% and 50% by volume) which is supplied to a small marine diesel engine on a dynamo test bench to evaluate the power and torque characteristics, also to consider the effect of BO fuel on specific fuel consumption exhaust gas temperature and brake thermal efficiency. The use of the ultrasonic mixing system has yielded impressive results for the homogeneous blend of ULSD and BO, which has contributed to improved combustion quality and thermal efficiency. The results have shown that the power, torque, and the exhaust gas temperature, decrease by approximately 9%, 2%, and 4% respectively with regarding the increase of the blended biodiesel rate while the specific fuel consumption and brake thermal efficiency tends to increase of around 6% and 11% with those blending ratios.

Sign in / Sign up

Export Citation Format

Share Document