scholarly journals Analyzing Utilization of Biomass in Combined Heat and Power and Combined Cooling, Heating, and Power Systems

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1002
Author(s):  
Mohammad Ali Bagherian ◽  
Kamyar Mehranzamir ◽  
Shahabaldin Rezania ◽  
Zulkurnain Abdul-Malek ◽  
Amin Beiranvand Pour ◽  
...  

Nowadays, ever-increasing energy demands and the depletion of fossil fuels require efficient and environmentally friendly technologies for energy generation. In this context, energy systems integration makes for a very strong proposition since it results in energy saving, fuel diversification, and the supply of cleaner energy. To this end, it is of the utmost importance to realize the current developments in this field and portray the state of the art of renewable generation in integrated energy systems. This review evaluates the utilization of bioenergy in cogeneration and trigeneration systems. The statistical reports of bioenergy and combined heat and power deployments in 28 countries of the European Union are discussed. Then, the most common research objectives of biomass-fueled combined heat and power systems are classified into three primary performance analyses, namely, energy and exergy analysis, thermo-economic optimization, and environment assessment. The influencing parameters of biomass utilization on each type of assessment are discussed, and the basic principles for carrying out such analyses in energy systems are explained. It is illustrated that the properties of feedstock, selection of appropriate conversion technology, associated costs with the biomass-to-bioenergy process, and sustainability of biomass are the primary influencing factors that could significantly affect the results of each assessment.

Author(s):  
Andrei Y. Petrov ◽  
Jeanette B. Berry ◽  
Abdolreza Zaltash

The Department of Energy (DOE), though Oak Ridge National Laboratory (ORNL), has worked in partnership with industry to develop highly-efficient Integrated Energy Systems (IES) that provide combined cooling, heating, and power (CHP). Equipment configurations and performance have been optimized and system construction has been simplified, resulting in lower design and installation costs. Consequently, government-industry partnerships are achieving the goal of promoting replication of these advanced systems. This paper describes and presents data collected during the operation of on-site power generation systems developed and implemented by DOE/ORNL-industry teams: (1) Burns & McDonnell and (2) Honeywell Labs. The Burns & McDonnell IES is operated by Austin Energy, the municipal utility in Austin, Texas. The gas turbine produces 4.5-MW of electricity, and its exhaust drives a 2,500-ton absorption chiller. The featured project implements a modular system design that is being used to construct a medical district utility at Dell Children's Medical Center of Central Texas-another government-industry project carried out in partnership with Austin Energy. The Honeywell IES at Ft. Bragg, North Carolina, is anchored by 5.7-MW natural-gas turbine that uses turbine exhaust to drive a 1,000-ton absorption chiller and/or an 80,000-lb/h heat recovery steam generator. An optimization software program provides system operators with hour-by-hour information on system costs associated with various operating scenarios. The project developed reference designs for 1.2-5.7 MW turbine-based systems to better communicate options for system design and facilitate feasibility studies. These systems demonstrate the thermal and economic value of "waste heat" by providing space heating and/or cooling with no additional fuel use. Field data confirms that the fuel use efficiency of these combined cooling, heating and power systems approaches 80% based on the higher heating value (HHV) of natural gas.


Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2476 ◽  
Author(s):  
Hossein Nami ◽  
Amjad Anvari-Moghaddam ◽  
Ahmad Arabkoohsar

The global energy matrix is going to embrace more and more renewable-based combined energy systems. Therefore, multi-generation energy systems, like CHPs (combined heat and power) could be extremely beneficial for such integrated energy systems. Also, the trend is toward 100% sustainable production where both renewable and waste energy sources are of special value. Especially, in Europe, waste incineration has received special attention over the past decades, as not only it is a smart method of waste disposal, but also a measure of cheap and environmentally friendly energy production. This study proposes a municipal waste-driven tri-generation (cold, heat, and power) system and assesses how this solution helps for easier integration of energy sectors and having a more sustainable chain of energy supply. Then, the solution is comprehensively analyzed over thorough thermodynamic, thermoeconomic, and thermoenvironmental investigations. The results of the assessments show that the proposed trigeneration system may effectively operate in any energy systems with simultaneous cold, heat, and power demands. Thermal, exergetic, fuel-to-power, fuel-to-heat, and fuel-to-cold efficiencies are found to be 83.28, 25.69, 23.49, 47.41, and 12.38%, respectively, while the payback period of 6 years is obtained based on the net present method.


2016 ◽  
Author(s):  
Ασπασία Χατζηπασχάλη

Τις τελευταίες δεκαετίες, υπάρχει έντονο ενδιαφέρον στις εναλλακτικές μορφές ενέργειας, ως αποτέλεσμα των αυξημένων ενεργειακών απαιτήσεων σε συνδυασμό και με το πρόβλημα της κλιματικής αλλαγής. Επιπρόσθετα, η συνεχής αύξηση του πληθυσμού και η εκβιομηχάνιση των κοινωνιών οδηγούν συχνά στην υποβάθμιση των οικοσυστημάτων, στα οποία στηρίζεται η ανθρώπινη ζωή. Για το λόγο αυτό, στη σύγχρονη βιομηχανική κοινωνία είναι αδήριτη η ανάγκη για την κατάλληλη επεξεργασία των διαφόρων αποβλήτων που προέρχονται από τις βιομηχανίες πριν την απόρριψή τους, προκειμένου να προληφθεί η ρύπανση του εδάφους και των υδάτινων συστημάτων (λιμνών, ποταμών, θάλασσας, υπόγειων υδροφόρων). Το τυρόγαλο που προέρχεται από τις βιομηχανίες γάλακτος κατά την διαδικασία παραγωγής τυριού είναι ένας από τους σημαντικότερους βιομηχανικούς ρυπαντές που από τη φύση του περιέχει υψηλό οργανικό φορτίο (COD). Συγχρόνως όμως, το τυρόγαλο αποτελεί την πρώτη ύλη για παραγωγή βιοαερίου. Η παραγωγή βιοαερίου και άλλων εμπορεύσιμων προϊόντων με ταυτόχρονη μείωση του COD μέσω κατάλληλων μεθόδων, αποδεικνύουν ότι το τυρόγαλο είναι μια σημαντική πηγή ενέργειας και όχι ένας απλός ρυπαντής. Η παρουσία βιοαποικοδομήσιμων συστατικών στο τυρόγαλο σε συνδυασμό και με τα πλεονεκτήματα της διεργασίας της Αναερόβιας Χώνευσης συγκριτικά με άλλες μεθόδους, καθιστούν την μέθοδο αυτή ως ιδιαίτερα κατάλληλη για την επεξεργασία των αποβλήτων αυτών.Στην παρούσα διατριβή μελετάται η τεχνολογία της αναερόβιας χώνευσης για την επεξεργασία των αποβλήτων τυρόγαλου σε συνδυασμό με την χρήση μικροστροβίλων για την παραγωγή ενέργειας. Η επιλογή της χρήσης μικροστροβίλων έναντι άλλων συστημάτων οφείλεται στα πλεονεκτήματα τους που τους καθιστούν ικανούς να χρησιμοποιηθούν σε εφαρμογές κατανεμημένης παραγωγής ηλεκτρικής ενέργειας, «smart grids», υβριδικά συστήματα και συστήματα συμπαραγωγής. Αρχικά παρουσιάζεται μία ανασκόπηση των πιο αντιπροσωπευτικών εφαρμογών αναερόβιας χώνευσης για επεξεργασία αποβλήτων τυρόγαλου τόσο σε πιλοτική όσο και σε εργαστηριακή κλίμακα. Επιπρόσθετα, γίνεται μία προσπάθεια αναγωγής των αποτελεσμάτων των διαφόρων ερευνών σε μια κοινή συγκριτική βάση, προκειμένου να αποτυπωθεί η κατάσταση της τεχνολογίας σε αντίστοιχα γραφήματα. Στη συνέχεια, αναπτύσσεται ένα μοντέλο προσομοίωσης του συστήματος αναερόβιας χώνευσης σε συνδυασμό με έναν μικροστρόβιλο και εξετάζονται δύο διαφορετικά σενάρια. Στο πρώτο σενάριο μελετάται η ενσωμάτωση ενός εμπορικά διαθέσιμου μικροστροβίλου στο σύστημα αναερόβιας χώνευσης για παραγωγή ηλεκτρικής ενέργειας, με καύση μόνο ενός μέρους του παραγόμενου βιοαερίου στον μικροστρόβιλο, ενώ το υπόλοιπο καίγεται στον καυστήρα για παραγωγή ατμού. Στην περίπτωση αυτή, η επιλογή του καταλληλότερου μικροστροβίλου έγινε με σκοπό να επιτευχθεί η μέγιστη παραγωγή ηλεκτρικής ενέργειας με ταυτόχρονη κάλυψη των θερμικών απαιτήσεων (παραγωγή ατμού) της μονάδας. Στο δεύτερο σενάριο μελετάται η περίπτωση μέγιστης παραγωγής ηλεκτρικής ενέργειας μέσω μικροστροβίλου, χωρίς κανένα περιορισμό όσον αφορά την παραγωγή σε ατμό. Τα δεδομένα για την μοντελοποίηση του συστήματος αναερόβια χώνευσης προέρχονται από ένα εργοστάσιο παραγωγής τυριών που λειτουργεί στην Ελλάδα, ενώ τα δεδομένα για τους μικροστροβίλους έχουν ληφθεί από τους αντίστοιχους κατασκευαστές τους. Ως εκ τούτου, προέκυψαν δύο διαφορετικά συστήματα τα οποία αναλύονται και εκτιμώνται σε σχέση με τα διαθέσιμα στοιχεία στη βιβλιογραφία. Στη συνέχεια διεξάγεται εξεργειακή ανάλυση των συστημάτων αυτών. Τα αποτελέσματα έδειξαν ότι τα συστήματα αυτά μπορεί να επιτύχουν υψηλούς βαθμούς απόδοσης, παρά την εμφάνιση υψηλών τιμών καταστροφών εξέργειας και αναστρεψιμοτήτων, κυρίως στον καυστήρα για το πρώτο σενάριο και στον θάλαμο καύσης του μικροστροβίλου για το δεύτερο σενάριο. Στη συνέχεια, πραγματοποιήθηκε οικονομική ανάλυση μέσω της μεθόδους Καθαρής Παρούσας Αξίας (ΚΠΑ). Τα αποτελέσματα δείχνουν πως πρόκειται για κερδοφόρες επενδύσεις, με υψηλά κέρδη από τον πρώτο χρόνο λειτουργίας. Επιπλέον, διεξήχθη παραμετρική ανάλυση ως μέθοδος βελτιστοποίησης. Στην περίπτωση αυτή, εξετάσθηκε η επίδραση ορισμένων σημαντικών παραμέτρων λειτουργίας όπως ο ισεντροπικός βαθμός απόδοσης του στροβίλου και του συμπιεστή και η επίδραση διαφόρων θερμοκρασιών κυρίως στη συνολική εξεργειακή απόδοση των συστημάτων και στη τιμή της ΚΠΑ. Τα αποτελέσματα έδειξαν ότι τα συστήματα αυτά μπορούν να επιτύχουν υψηλές αποδόσεις και τιμές ΚΠΑ με κατάλληλη επιλογή των παραμέτρων σχεδίασης.


2020 ◽  
Vol 57 (6) ◽  
pp. 12-22
Author(s):  
A. Fedotov ◽  
G. Vagapov ◽  
L. Grackova ◽  
R. Abdullazyanov

AbstractAn autonomous micro combined heat and power (Micro-CHP) is usually installed to increase energy efficiency and reduce energy costs in areas remote from large power systems. The main goal of autonomous Micro-CHP is to provide residential and industrial areas with electricity and heat. By designing an autonomous Micro-CHP, one of the key issues is the determination of rated power, since the energy efficiency of equipment and the costs of fossil fuels depend on the rated power. The mathematical model can better calculate the necessary rated power for an autonomous Micro-CHP in the case of operation with rechargeable batteries. Overall, the results have shown that the engine characteristics, operation process of three-phase synchronous generator and statistical information on loads are the criteria for improving energy efficiency.


Author(s):  
Hongkun Lv ◽  
Gaoyan Han ◽  
Xutao Guo ◽  
Hang Ma ◽  
Menglian Zheng

Abstract Distributed trigeneration has been regarded as one of the leading solutions for the future energy production. Unlike centralized energy systems, trigeneration typically recovers otherwise wasted energy and supplies combined cooling, heating, and power products to end users simultaneously, which however causes difficulties in meeting weak temporal-correlated energy demands of end users. Inspired by the success in electric energy systems, energy storage may provide effective solutions to the challenges with respect to trigeneration by decoupling energy generation and consumption. However, multiple key questions are yet fully understood for planning storage-integrated trigeneration systems. The present study aims to answer the following questions: (i) what roles of energy storage are going to play in a trigeneration system? And (ii) how would energy storage affect the performance of the trigeneration system? A self-coded trigeneration system planning model is developed via Python programming to optimize capacities of different devices in the trigeneration system with the presence of energy storage to meet variable multi-energy demands. The effects of the energy storage on the performance of the trigeneration system are investigated. The underlying mechanisms of the energy storage affecting the system’s performance are also explored based on the feasibility region analysis and wasted energy analysis.


2021 ◽  
Vol 2121 (1) ◽  
pp. 012015
Author(s):  
Tieyan Zhang ◽  
Junbao Yang ◽  
Yaru Wang ◽  
Min Li ◽  
Dawei Zhang ◽  
...  

Abstract With the development of science and technology, people also pay more and more attention to the development of new energy. Although there are also many studies on integrated energy systems now, integrated energy systems containing energy storage should also be further studied. This paper proposes an optimization of integrated energy system for combined cooling, heating and power supply of new energy based on energy storage, which analyzes the gas turbine, absorption refrigerating machine, electric refrigerator, photovoltaic power generation units, wind turbine and the work characteristics of the energy storage device. In this paper, an integrated energy system optimization model of new energy cogeneration with energy storage equipment is established. An example shows that the integrated energy system with energy storage can effectively solve the independent decoupling operation relationship among cool, heat and electricity. At the same time, the proposed model can also solve the energy interaction among cool, heat and electricity. In this way, the optimal operation of the integrated energy system can be realized.


Sign in / Sign up

Export Citation Format

Share Document