scholarly journals As-Synthesized Oleic Amido Propyl Betaine Surfactant Mixture and the Effect on the Crude Oil–Seawater Interfacial Tension

Processes ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 965
Author(s):  
Norhidayah Ahmad Wazir ◽  
Anita Ramli ◽  
Nurida M. Yusof ◽  
Wasan Saphanuchart ◽  
Emily S. Majanun
Keyword(s):  
Surface Tension ◽  
Interfacial Tension ◽  
Crude Oil ◽  
Slight Modification ◽  
Synthesis Process ◽  
Interfacial Property ◽  
Surfactant Mixture ◽  
Oil Composition ◽  
Surfactant Micelles ◽  
Low Level

As-synthesized oleic amido propyl betaine surfactant mixture was developed through a slight modification of a conventional two-step betaine synthesis process of amidation and quaternization reactions. This method is a “direct formulating through synthesis” to achieve a targeted interfacial property (interfacial tension or IFT) of the as-synthesized surfactant. Oil–water IFT was measured in the crude oil–seawater system at 96 °C. The result showed that the as-synthesized surfactant was able to reduce crude oil–seawater IFT to the ultra-low level (<0.01 mN/m). As the finding emerged, the investigation was conducted to identify the elements that would bring the characteristic of ultra-low IFT. The characterization of the surfactant using FTIR, TG-IR, and HPLC suggested that unreacted materials associated with the surfactant remained, such as the carryover of a fatty amide from the intermediate process, residues of N, N trimethylene dimethylamine and sodium chloride as a by-product, and the important newly formed sodium oleate compound that was inadvertently generated via the reaction. The performance of the as-synthesized in seawater condition has been verified and the surface tension plot shows the lowest surface tension point at 0.05 wt.% concentration before developing a plateau region at higher surfactant concentration, indicating that the formation of surfactant micelles has been interrupted by the presence of other components in the solution. The dynamic IFT test performed on the as-synthesized product revealed that it was still able to reduce the crude oil–seawater IFT to an ultra-low level, despite the multiple undesirable components in the surfactant. IFT as low as 3.4 × 10−4 mN/m for the specific seawater and crude oil composition was obtained at a temperature of 96 °C.

Research on the Relationship Between Crude Oil Composition and Asp Flooding Effect

2021 ◽  
Author(s):  
Zhe Sun ◽  
Xiaodong Kang ◽  
Shanshan Zhang
Keyword(s):  
Interfacial Tension ◽  
Crude Oil ◽  
Research Work ◽  
Practical Significance ◽  
Rock Surface ◽  
Composition Analysis ◽  
Oil Composition ◽  
Displacement Effect ◽  
Asp Flooding ◽  
The Relationship

Abstract In recent years, ASP flooding has been widely applied and obtained the remarkable effect. During the ASP flooding process, the oil composition has a great effect on the interfacial tension, which plays a vital role in the oil displacement effect. However, through literature research, few have made a profound study on the effect of oil composition on the recover rate. As a result, it is very important to carry out relevant research. For the oil sample (I) and sample (II) from two different regions in DQ, the crude oil composition analysis is first carried out. After the mixing of oil system and ASP system, the distribution ratio of agent is obtained. Furthermore, the oil composition does have an impact on the interfacial tension and recovery rate, and its influence law is explored. Finally, its application is introduced and analyzed. Research results show that, compare with sample (II), the sample (I) has more heavy components. After the mixing of oil samples and ASP, more surfactant and alkali enters into the oil phase of sample (I). Therefore, based on the similar miscibility principle, the surfactant is more likely to leave the oil water interface and enter into the oil phase of sample (I), which has a negative effect on reducing the interfacial tension. Furthermore, the phenomenon of chromatographic separation aggravates the adsorption of surfactant on rock surface. Therefore, combining the above factors, the oil increment effect of sample (I) becomes worse. In additional, the results of field test verify the laboratory experiments. From the above research, we canconclude that the relationship between crude oil composition and ASP flooding is of great significance. As a result, this paper has carried out a lot of related research work and revealed the internal relationship between the two, which has important practical significance to improve the effect of increasing oil and reducing water in ASP flooding technology.

APPLICATION OF BIOSURFACTANT IN OIL SPILL MANAGEMENT

1993 ◽  
Vol 1993 (1) ◽  
pp. 503-504
Author(s):  
Asha Juwarkar ◽  
P. Sudhakar Babu ◽  
Kirti Mishra ◽  
Megha Deshpande
Keyword(s):  
Surface Tension ◽  
Interfacial Tension ◽  
Crude Oil ◽  
Oil Spill ◽  
Oily Sludge ◽  
Stable Emulsion ◽  
Oil Emulsion ◽  
Surface Tension Reduction ◽  
Surface Active ◽  
Oil Spill Cleanup

ABSTRACT Surfactants are surface active agents which reduce surface tension and interfacial tension between two immiscible phases and help in emulsification. Toxicity, nonbiodegradability, and limited structural types of chemical surfactants have initiated the need for effective substitutes. Biosurfactants, which are synthesized by specific microbial cultures, have surface active properties comparable to chemical surfactants. They are compounds that can help in oil spill cleanup operations without presenting the problems posed by chemical surfactants. Two bacterial cultures were isolated from oil-contaminated soil and were used for biosurfactant production. The biosurfactants produced by the Bacillus licheniformis, BS1, and Pseudomonas aeruginosa, BS2, in mineral media containing glucose as the carbon source belong to the class of lipoprotein and glycolipid, respectively. They were found to reduce the surface and interfacial tension of water and water-hexadecane systems from 72 dynes/cm and 40 dynes/cm to 28 to 30 dynes/cm and 1 to 3 dynes/cm, respectively. These results were comparable with chemical surfactants with respect to surface tension reduction (Slic Gone 34 dynes/cm and Castrol 30 dynes/cm). The low interfacial tension allows the formation of stable emulsion. The two cultures were grown on different substrates, namely, glucose, mannitol, glycerol, hexadecane, oily sludge, and crude oil. Emulsion formation of hexadecane in water was tested with the cell-free broth containing biosurfactant from the respective substrate broths. Emulsions of 56 percent stability to 100 percent stability were obtained from these biosurfactant-containing broths. Both biosurfactants were able to emulsify crude oil. A surfactant's ability to form a stable emulsion is the first step in oil spill cleanup. The emulsified oil can then be acted upon very easily by the microorganisms under study. Therefore, the biosurfactants produced by the microorganisms under study offer a good potential for use in oil spill cleanup.

scholarly journals Improved As-Synthesized Oleic Amido Propyl Betaine Surfactant Mixture for Stable Ultra-Low Interfacial Tension: Effect of Mixed Co-Solvents

2021 ◽  
Vol 5 (1) ◽  
pp. 2
Author(s):  
Norhidayah Ahmad Wazir ◽  
Wasan Saphanuchart ◽  
Anita Ramli ◽  
Nurida Yusof
Keyword(s):  
Interfacial Tension ◽  
Ethylene Glycol ◽  
Diethylene Glycol ◽  
Aqueous Solubility ◽  
Synthesis Process ◽  
Surfactant Mixture ◽  
Mixing Ratios ◽  
Monobutyl Ether ◽  
Glycol Monobutyl Ether ◽  
Oil Water

As-synthesized oleic amido propyl betaine surfactant mixture, that was produced through a “direct formulation through synthesis” process, exhibited ultra-low oil/water interfacial tension (IFT) values as low as 3.5 × 10−4 mN/m when dissolved in seawater at a reservoir temperature of 96 °C. The as-synthesized surfactant, which was left untreated, had a slightly cloudy appearance when mixed with seawater. Polar solvents were introduced to this surfactant to improve its aqueous solubility by changing its overall hydrophilicity, particularly on the oil/water interface. In this study, two types of glycol ether co-solvent, i.e., ethylene glycol monobutyl ether and diethylene glycol monobutyl ether, were used at different concentrations in a single application and as a mixture of co-solvents at a certain ratio. The behavior of the as-synthesized surfactant with the presence of these co-solvents was investigated. As a result, it showed that the co-solvent helps in solubility improvement and alters the interfacial tension behavior of the surfactant. Ethylene glycol monobutyl ether was found to be efficient in maintaining an ultra-low IFT value of the surfactant. However, the aqueous solubility of the surfactant was not significantly improved. In contrast, the addition of diethylene glycol monobutyl ether showed improvement of the aqueous solubility of the surfactant, but it tends to increase the IFT above ultra-low value. Based on this understanding, a set of co-solvent mixing ratios were tested, and the results showed further improvement in both the oil/water interfacial tension behavior and surfactant aqueous solubility. The most stable oil/water IFT of 3.36 × 10−3 mN/m and clearer surfactant solutions were obtained for ratio C at 35 wt.% presence of co-solvent.

SARA-Based Correlation To Describe the Effect of Polar/Nonpolar Interaction, Salinity, and Temperature for Interfacial Tension of Low-Asphaltene Crude Oils Characteristic of Unconventional Shale Reservoirs

SPE Journal ◽  
2021 ◽  
pp. 1-13
Author(s):  
I. W. R. Saputra ◽  
D. S. Schechter
Keyword(s):  
Interfacial Tension ◽  
Crude Oil ◽  
Oil Recovery ◽  
Petroleum Engineering ◽  
Crude Oils ◽  
Oil Composition ◽  
Surface Activities ◽  
Low Salinity ◽  
Oil Water ◽  
Shale Reservoirs

Summary Oil/water interfacial tension (IFT) is an important parameter in petroleum engineering, especially for enhanced-oil-recovery (EOR) techniques. Surfactant and low-salinity EOR target IFT reduction to improve oil recovery. IFT values can be determined by empirical correlation, but widely used thermodynamic-based correlations do not account for the surface-activities characteristic of the polar/nonpolar interactions caused by naturally existing components in the crude oil. In addition, most crude oils included in these correlations come from conventional reservoirs, which are often dissimilar to the low-asphaltene crude oils produced from shale reservoirs. This study presents a novel oil-composition-based IFT correlation that can be applied to shale-crude-oil samples. The correlation is dependent on the saturates/aromatics/resins/asphaltenes (SARA) analysis of the oil samples. We show that the crude oil produced from most unconventional reservoirs contains little to no asphaltic material. In addition, a more thorough investigation of the effect of oil components, salinity, temperature, and their interactions on the oil/water IFT is provided and explained using the mutual polarity/solubility concept. Fifteen crude-oil samples from prominent US shale plays (i.e., Eagle Ford, Middle Bakken, and Wolfcamp) are included in this study. IFT was measured in systems with salinity from 0 to 24% and temperatures up to 195°F.

Perbandingan Karakteristik Surfaktan Metil Ester Sulfonat dan Sodium Lauril Sulfonat sebagai Bahan Emulsifier

2016 ◽  
Vol 9 (2) ◽  
pp. 167-176
Author(s):  
Eldha Sampepana ◽  
Paluphy Eka Yustini ◽  
Aditya Rinaldi ◽  
Amiroh Amiroh
Keyword(s):  
Fatty Acids ◽  
Surface Tension ◽  
Methyl Ester ◽  
Interfacial Tension ◽  
Palm Oil ◽  
Emulsion Stability ◽  
Raw Material ◽  
Enzymatic Method

Surfactant which is used as raw emulsifier in an industry activity such as Sodium Lauryl Sulfonate is a raw material import, it is petroleum derivative which is not renewable and may cause pollution to the environment, because it is not degraded and are carcinogenic. The purpose of the research is to compare the characteristics of the Quaternary methyl ester sulfonat (MES) and Sodium Lauryl Sulfonat (SLS) as emulsifier. First, make the MES by filtering and eliminating fatty acids of palm oil, then process the MES with enzymatic method become methyl ester, then react it in sulfonation and metanolization process, and also neutralized with NaOH. Next, the MES experiment is compared with SLS and existing MES in the market. The results show that surfactants MES experiment has value hidrofil lipofil balance (HLB) interfacial tension and emulsion stability greater than MES in the market and SLS. And the surface tension of MES experiment is larger than MES in the market, but smaller compared to SLS.ABSTRAKSurfaktan yang digunakan sebagai bahan baku emulsifer dalam aktivitas suatu industri pada saat ini seperti Sodium Lauril Sulfonat  merupakan bahan baku import yang merupakan turunan dari minyak bumi, dengan sifat tidak dapat diperbaharui dan dapat menimbulkan pencemaran terhadap lingkungan karena tidak mudah terdegradasi serta bersifat karsinogenik. Metil ester sulfonat dari bahan minyak sawit merupakan surfaktan dengan sifat mudah terdegradasi yang perlu diketahui karakteristiknya. Penelitian bertujuan untuk membandingkan karakteristik surfaktan metil ester sulfonat (MES) dan Sodium Lauril Sulfonat (SLS) sebagai bahan emulsifier. Mula-mula dilakukan pembuatan MES dengan cara menyaring dan menghilangkan asam lemak minyak sawit terlebih dahulu, kemudian diolah menjadi metil ester secara enzimatis, lalu direaksikan secara sulfonasi dan metanolisis, serta dinetralkan dengan NaOH. Selanjutnya MES hasil percobaan dibandingkan dengan SLS dan MES yang ada dipasaran. Hasil penelitian menunjukkan bahwa surfaktan MES memiliki nilai hidrofil lipofil balance (HLB) tegangan antar muka dan stabilitas emulsi lebih besar apabila dibandingkan dengan MES di pasaran dan SLS, kecuali nilai stabilitas emulsi antara MES dan SLS sama. Dan tegangan permukaan MES hasil percobaan, lebih besar dibandingkan dengan MES dipasaran, dan lebih kecil dibandingkan dengan SLS. Kata kunci :   Metil  ester sulfonat, hidrofil lipofil balance, emulsifier, sodium lauril sulfonat , stabilitas emulsi 

The mechanism responsible for lowering interfacial tension between heavy crude oil and betaine solutions

2021 ◽  
pp. 1-9
Author(s):  
Miao Liu ◽  
Zhi-cheng Xu ◽  
Zhi-qiang Jin ◽  
Zheng-xi Li ◽  
Lei Zhang ◽  
...  
Keyword(s):  
Interfacial Tension ◽  
Crude Oil ◽  
Heavy Crude Oil ◽  
Heavy Crude
Sign in / Sign up

Export Citation Format

Share Document