scholarly journals Kinetics, Isotherms, and Thermodynamic Modeling of the Adsorption of Phosphates from Model Wastewater Using Recycled Brick Waste

Processes ◽  
2020 ◽  
Vol 8 (6) ◽  
pp. 665 ◽  
Author(s):  
Uduakobong A. Edet ◽  
Augustine O. Ifelebuegu
Keyword(s):  
Wastewater Treatment ◽  
Adsorption Process ◽  
Chemical Precipitation ◽  
Phosphate Removal ◽  
Treated Wastewater ◽  
Maximum Adsorption Capacity ◽  
Adsorption Capacities ◽  
Effective Removal ◽  
Pseudo Second Order ◽  
Isotherms And Thermodynamics

Phosphates in wastewater at elevated concentrations cause eutrophication of water bodies and their removal from treated wastewater is essential before effluents are discharged to the environment. Phosphates are predominately removed during wastewater treatment by chemical precipitation which is usually expensive and has a significant environmental footprint. The purpose of this study was to investigate the effectiveness of waste recycled bricks as adsorbent for phosphate removal during wastewater treatment. The kinetics, isotherms, and thermodynamics of adsorption were investigated to establish the mechanisms of adsorption. The results showed that adsorption capacities increased with an increase in contact time, adsorbent dosage, and initial phosphate concentration. The kinetic study indicated that adsorption was governed by several mechanisms with various processes dominating different stages of the adsorption. The adsorption process was better represented by the pseudo-second-order kinetics and the Langmuir isotherm adequately described the adsorption of phosphates onto brick particles with a maximum adsorption capacity of 5.35 mg/g. The thermodynamic studies showed that the adsorption process was exothermic and proceeded spontaneously, demonstrating that waste bricks can be used as a sustainable alternative for the effective removal of phosphates from wastewater.

scholarly journals Cadmium and Lead Adsorption Capacities of Nigerian Ultisol Soil of Tropics

2019 ◽  
Vol 35 (3) ◽  
pp. 1004-1012 ◽  
Author(s):  
Henry Olumayowa Oluwasola ◽  
Jonnie Niyi Asegbeloyin ◽  
Alfred Ezinna Ochonogor ◽  
Julius Udeh Ani ◽  
Collins Ugochukwu Ibeji ◽  
...  
Keyword(s):  
Contact Time ◽  
Adsorption Process ◽  
Sorption Process ◽  
Maximum Adsorption Capacity ◽  
Lead Adsorption ◽  
Adsorption Capacities ◽  
Batch Technique ◽  
Pseudo Second Order ◽  
Cadmium And Lead ◽  
Kinetics Of

The study investigates the sorption of cadmium (Cd) and lead (Pb) by Nsukka urban soils, a Nigeria soil classified as an ultisol soil of tropics. Laboratory batch technique was utilized to investigate the effect of pH, temperature, contact time, and concentration on the adsorption process. Results showed that adsorption efficiency of the soils for Cd2+ and Pb2+ increased with increase in pH, temperature, and contact time but decreased with increase in concentration. The data from adsorption study was fitted to the Langmuir, Freundlich and Temkin adsorption isotherms, and results revealed that Langmuir isotherm fitted most satisfactorily. On the basis of the obtained maximum adsorption capacity (qmax) from the Langmuir model, the affinity of Cd and Pb for the studied soil was Pb2+ > Cd2+. Pseudo-second order (r2 ≥ 0.995-0.999) best described the kinetics of the sorption process for the metal ions in the soil.

The Removal of Phosphate by Coal Gangue from Wastewater

2012 ◽  
Vol 209-211 ◽  
pp. 2005-2008 ◽  
Author(s):  
Fang Juan Zhang ◽  
Hua Yong Zhang ◽  
Lu Yi Zhang
Keyword(s):  
Waste Water ◽  
Adsorption Process ◽  
Phosphate Concentration ◽  
Phosphate Removal ◽  
Coal Gangue ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The feasibility of coal gangue as an adsorbent for phosphate removal from wastewater was investigated. The results showed that the equilibrium data were well fit to Langmuir isotherm model and the maximum adsorption capacity calculated was 2.49 mg/g at 25°C. The adsorption process followed pseudo-second order model. And the practical waste water experiment indecated that the phosphate concentration of real sewage decreased from 0.625mg/L to 0.121mg/L. These results suggested that coal gangue can be used as an adsorbent to removal phosphate from wastewater.

Phosphorus removal from aqueous solution using a novel granular material developed from building waste

2017 ◽  
Vol 75 (6) ◽  
pp. 1500-1511 ◽  
Author(s):  
Shengjiong Yang ◽  
Pengkang Jin ◽  
Xiaochang C. Wang ◽  
Qionghua Zhang ◽  
Xiaotian Chen
Keyword(s):  
Granular Material ◽  
Chemical Precipitation ◽  
Phosphate Removal ◽  
Precipitation Process ◽  
Order Kinetic ◽  
Solution Ph ◽  
Experimental Conditions ◽  
Removal Capacity ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this study, a granular material (GM) developed from building waste was used for phosphate removal from phosphorus-containing wastewater. Batch experiments were executed to investigate the phosphate removal capacity of this material. The mechanism of removal proved to be a chemical precipitation process. The characteristics of the material and resulting precipitates, the kinetics of the precipitation and Ca2+ liberation processes, and the effects of dosage and pH were investigated. The phosphate precipitation and Ca2+ liberation processes were both well described by a pseudo-second-order kinetic model. A maximum precipitation capacity of 0.51 ± 0.06 mg g−1 and a liberation capacity of 6.79 ± 0.77 mg g−1 were measured under the experimental conditions. The processes reached equilibrium in 60 min. The initial solution pH strongly affected phosphate removal under extreme conditions (pH <4 and pH >10). The precipitates comprised hydroxyapatite and brushite. This novel GM can be considered a promising material for phosphate removal from wastewater.

scholarly journals Enhancing acidic dye adsorption by modified UiO-66

2020 ◽  
Vol 1 (2) ◽  
pp. 54-62
Author(s):  
Naser Al Amery ◽  
Hussein Rasool Abid ◽  
Shaobin Wang ◽  
Shaomin Liu
Keyword(s):  
Adsorption Process ◽  
Dye Adsorption ◽  
Batch Adsorption ◽  
First Order ◽  
Freundlich Isotherms ◽  
Adsorption Capacities ◽  
Pseudo Second Order ◽  
The Stability ◽  
Second Order Equations ◽  
Better Than

In this study, two improved versions of UiO-66 were successfully synthesised. Modified UiO-66 and UiO-66-Ce were characterised to confirm the integrity of the structure, the stability of functional groups on the surface and the thermal stability. Activated samples were used for removal harmful anionic dye (methyl orange) (MO) from wastewater. Batch adsorption process was relied to investigate the competition between those MOFs for removing MO from aqueous solution. Based on the results, at a higher initial concentration, the maximum MO uptake was achieved by UiO-66-Ce which was better than modified-UiO-66. They adsorbed 71.5 and 62.5 mg g-1 respectively. Langmuir and Freundlich isotherms were employed to simulate the experimental data. In addition, Pseudo first order and Pseudo second order equations were used to describe the dynamic behaviour of MO through the adsorption process. The high adsorption capacities on these adsorbents can make them promised adsorbents in industrial areas.

scholarly journals Utilization to Remove Pb (II) Ions from Aqueous Environments Using Waste Fish Bones by Ion Exchange

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Bayram Kizilkaya ◽  
A. Adem Tekınay
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Mechanism ◽  
Cost Effective ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Fish Bones ◽  
Adsorption Capacities ◽  
Aqueous Environments ◽  
Equilibrium Data ◽  
Pseudo Second Order

Removal of lead (II) from aqueous solutions was studied by using pretreated fish bones as natural, cost-effective, waste sorbents. The effect of pH, contact time, temperature, and metal concentration on the adsorption capacities of the adsorbent was investigated. The maximum adsorption capacity for Pb (II) was found to be 323 mg/g at optimum conditions. The experiments showed that when pH increased, an increase in the adsorbed amount of metal of the fish bones was observed. The kinetic results of adsorption obeyed a pseudo second-order model. Freundlich and Langmuir isotherm models were applied to experimental equilibrium data of Pb (II) adsorption and the value ofRLfor Pb (II) was found to be 0.906. The thermodynamic parameters related to the adsorption process such asEa,ΔG°,ΔH°, andΔS° were calculated andEa,ΔH°, andΔS° were found to be 7.06, 46.01 kJ mol−1, and 0.141 kJ mol−1K−1for Pb (III), respectively.ΔH° values (46.01 kJmol−1) showed that the adsorption mechanism was endothermic. Weber-Morris and Urano-Tachikawa diffusion models were also applied to the experimental equilibrium data. The fish bones were effectively used as sorbent for the removal of Pb (II) ions from aqueous solutions.

scholarly journals Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2218 ◽  
Author(s):  
Carlos Grande-Tovar ◽  
William Vallejo ◽  
Fabio Zuluaga
Keyword(s):  
Adsorption Capacity ◽  
Polyacrylic Acid ◽  
Adsorption Process ◽  
Kinetic Constant ◽  
Copper Ion ◽  
Toxic Metal ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Pseudo Second Order

In this work, we synthesized chitosan grafted-polyacrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto the CS-g-PA surface. Adsorption equilibrium studies indicated that pH 4.0 was the best pH for the adsorption process and the maximum adsorption capacity over CS-g-PA for Pb2+ ions was 98 mg·g−1 and for Cu2+ it was 164 mg·g−1, while for chitosan alone (CS), the Pb2+ adsorption capacity was only 14.8 mg·g−1 and for Cu2+ it was 140 mg·g−1. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data and besides, pseudo-second-order model was suitable to describe kinetic results for the adsorption process, demonstrating a larger kinetic constant of the process was larger for Pb2+ than Cu2+. Compared to other adsorbents reported, CS-g-PA had comparable or even superior adsorbent capacity and besides, all these results suggest that the new CS-g-PA polymers had potential as an adsorbent for hazardous and toxic metal ions produced by different industries.

scholarly journals Sequential adsorptive removal of phosphate, nitrate and chromate from polluted water using active carbon derived from stems of Carissa carandas plant

2020 ◽  
Author(s):  
Wondwosen Kebede Biftu ◽  
M. Suneetha ◽  
Kunta Ravindhranath
Keyword(s):  
Active Carbon ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Adsorption Capacities ◽  
Carissa Carandas ◽  
Phosphate Nitrate ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Sorption Mechanisms ◽  
Maximum Removal

Abstract Sulphuric acid-generated active carbon from stems of Carissa carandas plant is investigated successfully as an adsorbent for the sequential removal of phosphate, nitrate and chromate from polluted water. Controlling parameters are investigated and optimized for the maximum removal of the pollutants. At pH: 7, phosphate and nitrate can be simultaneously removed, while at pH: 2, chromate can be sequentially removed from the admixtures of the three pollutants. The active carbon is characterized using FTIR, FESEM and EDX. Sorption mechanisms are investigated using various adsorption isotherms and kinetic models. Thermodynamics parameters are evaluated. The data reveal the Langmuir isotherm model of adsorption, pseudo-second-order kinetics and spontaneity of sorption processes. Langmuir individual maximum adsorption capacity is: 72.75 mg/g for chromate; 63.40 mg/g for phosphate; and 49.15 mg/g for nitrate. The active carbon can be regenerated and reused. The method is used for the removal of all three pollutant ions from polluted water. The merit of this investigation is that an active carbon is identified with good adsorption capacities for the successful sequential removal of phosphate, nitrate and chromate ions from polluted water.

Preparation of bio-based magnetic adsorbent and application for efficient removal of Cd(II) from water

2018 ◽  
Vol 77 (5) ◽  
pp. 1313-1323 ◽  
Author(s):  
Jianjun Zhou ◽  
Xionghui Ji ◽  
Xiaohui Zhou ◽  
Jialin Ren ◽  
Yaochi Liu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
Order Model ◽  
Efficient Removal ◽  
Adsorption Ability ◽  
Adsorption Sites ◽  
Pseudo Second Order

Abstract A novel magnetic bio-adsorbent (MCIA) was developed, characterized and tested for its Cd(II) removal from aqueous solution. MCIA could be easily separated from the solution after equilibrium adsorption due to its super-paramagnetic property. The functional and magnetic bio-material was an attractive adsorbent for the removal of Cd(II) from aqueous solution owing to the abundant adsorption sites, amino-group and oxygen-containing groups on the surface of Cyclosorus interruptus. The experimental results indicated that the MCIA exhibited excellent adsorption ability and the adsorption process was spontaneous and endothermic. The adsorption isotherm was consistent with the Langmuir model. The adsorption kinetic fitted the pseudo-second-order model very well. The maximum adsorption capacity of Cd(II) onto MCIA was 40.8, 49.4, 54.6 and 56.6 mg/g at 293, 303, 313 and 323 K, respectively. And the MCIA exhibited an excellent reusability and impressive regeneration. Therefore, MCIA could serve as a sustainable, efficient and low-cost magnetic adsorbent for Cd(II) removal from aqueous solution.

scholarly journals Adsorption of Direct Blue 78 Using Chitosan and Cyclodextrins as Adsorbents

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1003 ◽  
Author(s):  
Ainoa Murcia-Salvador ◽  
José A. Pellicer ◽  
María I. Fortea ◽  
Vicente M. Gómez-López ◽  
María I. Rodríguez-López ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Advanced Oxidation Process ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Direct Blue ◽  
Complementary Action ◽  
Coupled Process ◽  
Kinetic Tests ◽  
Equilibrium Data ◽  
Pseudo Second Order

The dyeing industry is one of the most polluting in the world. The adsorption of dyes by polymeric matrixes can be used to minimize the discharge of dyes into the environment. In the present study, chitosan-NaOH and β-cyclodextrin-epichlorohydrin polymers were used to remove the dye Direct Blue 78 from a wastewater model. To understand the adsorption behavior of Direct Blue 78 onto the polymers, adsorption rate and maximum adsorption capacity were calculated using kinetic tests and isotherm curves respectively. The kinetic data and mechanism of the adsorption process were analyzed by three models and the equilibrium data by three adsorption isotherms; also the different thermodynamic parameters were calculated. Results showed that the adsorption process follows pseudo-second-order kinetics in both polymers and the Langmuir isotherm best-fitted data for chitosan-NaOH polymer and the Freundlich isotherm for the β-CDs-EPI polymer. The adsorption process is exothermic in both cases and spontaneous for the β-CDs-EPI polymer to a certain temperature and not spontaneous for the chitosan-NaOH polymer and β-CDs-EPI polymer at higher temperatures. The complementary action of an advanced oxidation process eliminated >99% of the dye from water. The coupled process seems to be suitable for reducing the environmental impact of the dyeing industry.

scholarly journals Removal of Crystal Violet Dye from Aqueous Solutions onto Date Palm Fiber by Adsorption Technique

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Mashael Alshabanat ◽  
Ghadah Alsenani ◽  
Rasmiah Almufarij
Keyword(s):  
Crystal Violet ◽  
Date Palm ◽  
Dye Removal ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Date Palm Fibers ◽  
Crystal Violet Dye ◽  
Pseudo Second Order ◽  
Influence Of Ph

The adsorption of crystal violet (CV) onto date palm fibers (DPFs) was examined in aqueous solution at 25°C. The experimental maximum adsorption capacity value was0.66×10−6. Langmuir, Freundlich, Elovich and Temkin models were applied to describe the equilibrium isotherms. The influence of pH and temperature on dye removal was evaluated. The percentage removal of CV dye by adsorption onto DPF at different pH and temperatures showed that these factors play a role in the adsorption process. Thermodynamic analysis was performed, and the Gibbs free energyΔGο, enthalpy changeΔHο, and entropyΔSοwere calculated. The negative values ofΔGοindicate spontaneous adsorption. The negative value ofΔHοindicates that the interaction between CV and DPF is exothermic, and the positive value ofΔSοindicates good affinity between DPF and CV. The kinetic data were fitted to a pseudo-second-order model.

Sign in / Sign up

Export Citation Format

Share Document