scholarly journals Syngas Production Improvement of Sugarcane Bagasse Conversion Using an Electromagnetic Modified Vacuum Pyrolysis Reactor

Processes ◽  
2020 ◽  
Vol 8 (2) ◽  
pp. 252
Author(s):  
Muhammad Djoni Bustan ◽  
Sri Haryati ◽  
Fitri Hadiah ◽  
Selpiana Selpiana ◽  
Adri Huda
Keyword(s):  
Electromagnetic Field ◽  
Low Temperature ◽  
Sugarcane Bagasse ◽  
Pyrolysis Temperature ◽  
Low Cost ◽  
High Yield ◽  
Minimum Requirement ◽  
Syngas Production ◽  
Vacuum Pyrolysis ◽  
Pyrolysis Reactor

The trends and challenges of pyrolysis technology nowadays have shifted to low-temperature pyrolysis, which provides low-cost processes but high-yield conversion, with suitable H2/CO ratios for performing gas-to-liquid technology in the future. The present study has developed a modified vacuum pyrolysis reactor to convert sugarcane bagasse to gas products, including H2, CO2, CH4, and CO in the low-temperature process. The experimental design includes the effects of pyrolysis time, pyrolysis temperature, and applying a current as a function of the electromagnetic field. The result showed that 0.12 ng/µL, 0.85 ng/µL, and 0.31 ng/µL of hydrogen (H2), carbon dioxide (CO2), and carbon monoxide (CO) gases, respectively, started forming in the first 20 min at 210 °C for the pyrolysis temperature, and the gas product accumulated in the increase of pyrolysis time and temperature. In the absence of electromagnetic field, the optimum condition was obtained at 60 min and 290 °C of pyrolysis time and temperature, respectively, in which 20.98, 14.86, 14.56, and 15.78 ng/µL of H2, CO2, CH4, and CO were generated, respectively. However, this condition did not meet the minimum value of Fischer–Tropsch synthesis, since the minimum requirement of the H2/CO ratio is 2. Furthermore, applying the electromagnetic field performed a significant improvement, in which applying current ≥3A improved the gas product to 33.76, 8.71, 18.39, and 7.66 ng/µL of H2, CO2, CH4, and CO, respectively, with an H2/CO ratio above 2. The obtained result showed that applying electric current as an electromagnetic field provides a significant improvement, not only in boosting yield product, but also in performing the standard ratios of H2/CO in the gas–liquid conversion of syngas to liquid hydrocarbon. The result proves that applying an electromagnetic approach could be used as an alternative way to obtain efficiency and as a better process to convert biomass as a future energy source.

scholarly journals Economic Friendly ZnO-Based UV Sensors Using Hydrothermal Growth: A Review

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4083
Author(s):  
Liguo Qin ◽  
Fagla Jules Mawignon ◽  
Mehboob Hussain ◽  
Nsilani Kouediatouka Ange ◽  
Shan Lu ◽  
...  
Keyword(s):  
Hydrothermal Synthesis ◽  
Low Temperature ◽  
Low Cost ◽  
Economic Cost ◽  
Pollution Monitoring ◽  
High Yield ◽  
Growth Time ◽  
Zno Nanostructure ◽  
Yield Production ◽  
Uv Sensors

Ultraviolet (UV) sensors offer significant advantages in human health protection and environmental pollution monitoring. Amongst various materials for UV sensors, the zinc oxide (ZnO) nanostructure is considered as one of the most promising candidates due to its incredible electrical, optical, biomedical, energetic and preparing properties. Compared to other fabricating techniques, hydrothermal synthesis has been proven to show special advantages such as economic cost, low-temperature process and excellent and high-yield production. Here, we summarize the latest progress in research about the hydrothermal synthesis of ZnO nanostructures for UV sensing. We particularly focus on the selective hydrothermal processes and reveal the effect of key factors/parameters on ZnO architectures, such as the laser power source, temperature, growth time, precursor, seeding solution and bases. Furthermore, ZnO hydrothermal nanostructures for UV applications as well as their mechanisms are also summarized. This review will therefore enlighten future ideas of low-temperature and low-cost ZnO-based UV sensors.

Visible Light Assisted Hantzsch Reaction: Synthesis of Polycyclic Dihydropyridines

2019 ◽  
Vol 16 (8) ◽  
pp. 676-682
Author(s):  
Ankusab Noorahmadsab Nadaf ◽  
Kalegowda Shivashankar
Keyword(s):  
Reaction Time ◽  
Light Intensity ◽  
Ammonium Acetate ◽  
Low Cost ◽  
Aromatic Aldehydes ◽  
Light Irradiation ◽  
High Yield ◽  
Short Reaction Time ◽  
Green Protocol ◽  
Dihydropyridine Derivatives

The polycyclic dihydropyridine nucleus represents the heterocyclic system of invaluable core motifs with wide applications in chemical, biological and physical properties. Although this kind of compounds have been extensively synthesized by other groups, the synthesis of these compounds under CFL light intensity were not explored. The synthesis of polycyclic dihydropyridine derivatives were achieved through the reaction of 4-hydroxycoumarin, aromatic aldehydes and ammonium acetate under CFL light irradiation conditions. A series of polycyclic dihydropyridine derivatives were prepared under CFL light irradiation conditions with high yield, short reaction time, ambient condition and without the use of catalyst. The results displayed an efficient method for the synthesis of polycyclic dihydropyridine derivatives. Clean profile, short reaction time, low cost and use of CFL light intensity instead of catalyst making it a genuinely green protocol.

Using Low Temperature, Cost-effective and Green Methods to Carbon Nanohorn Synthesis

2019 ◽  
Vol 9 (2) ◽  
pp. 157-160
Author(s):  
Ali Hasani
Keyword(s):  
Laser Ablation ◽  
Melting Point ◽  
Palm Olein ◽  
Arc Discharge ◽  
Low Cost ◽  
The Other ◽  
High Yield ◽  
Reaction Field ◽  
Carbon Nanohorns ◽  
Graphite Rod

Background: Laser ablation method has high-yield and pure SWCNHs. On the other hand, arc discharge methods have low-cost production of SWCNHs. However, these techniques have more desirable features, they need special expertness to use high power laser or high current discharge that either of them produces very high temperature. As for the researches, the temperatures of these techniques are higher than 4727°C to vaporize the graphite. So, to become aware of the advantages of SWCNHs, it is necessary to find a new way to synthesize SWCNHs at a lower temperature. In other words, reaction field can be expandable at a moderate temperature. This paper reports a new way to synthesize SWCNHs at an extremely reduced temperature. Methods: According to this study, the role of N2 is the protection of the copper holder supporting the graphite rod by increasing heat transfer from the holder. After the current of 70 A was supplied to the system, the temperature of graphite rod was raised to 1600°C. It is obvious that this temperature is somehow higher than the melting point of palladium, 1555°C, and much lower than graphite melting point, 3497°C. Results: Based on the results, there are transitional precursors simultaneous with the SWCNHs. This composition can be created by distortion of the primary SWCNTs at the higher temperature. Subsequently, each SWCNTs have a tendency to be broken into individual horns. With increasing the concentration of the free horns, bud-like SWCNHs can be produced. Moreover, there are individual horns almost separated from the mass of single wall carbon nanohorns. This structure is not common in SWCNHs synthesized by the usual method such as arc discharge or laser ablation. Through these regular techniques, SWCNHs are synthesized as cumulative particles with diameters about 30-150 nm. Conclusion: A simple heating is needed for SWCNTs transformation to SWCNHs with the presence of palladium as catalyst. The well-thought-out mechanism for this transformation is that SWCNTs were initially changed to highly curled shape, and after that were formed into small independent horns. The other rout to synthesize SWCNHs is the pyrolysis of palm olein at 950°C with the assistance of zinc nitrate and ferrocene. Palm olein was used as a promising, bio-renewable and inexpensive carbon source for the production of carbon nanohorns.

scholarly journals Generation of High-Yield, Functional Oligodendrocytes from a c-myc Immortalized Neural Cell Line, Endowed with Staminal Properties

2021 ◽  
Vol 22 (3) ◽  
pp. 1124
Author(s):  
Mafalda Giovanna Reccia ◽  
Floriana Volpicelli ◽  
Eirkiur Benedikz ◽  
Åsa Fex Svenningsen ◽  
Luca Colucci-D’Amato
Keyword(s):  
Cell Line ◽  
Low Cost ◽  
Neural Cell ◽  
New Drugs ◽  
High Yield ◽  
Time Saving ◽  
Interacting Protein ◽  
Neuronal Marker ◽  
Differentiation Status

Neural stem cells represent a powerful tool to study molecules involved in pathophysiology of Nervous System and to discover new drugs. Although they can be cultured and expanded in vitro as a primary culture, their use is hampered by their heterogeneity and by the cost and time needed for their preparation. Here we report that mes-c-myc A1 cells (A1), a neural cell line, is endowed with staminal properties. Undifferentiated/proliferating and differentiated/non-proliferating A1 cells are able to generate neurospheres (Ns) in which gene expression parallels the original differentiation status. In fact, Ns derived from undifferentiated A1 cells express higher levels of Nestin, Kruppel-like factor 4 (Klf4) and glial fibrillary protein (GFAP), markers of stemness, while those obtained from differentiated A1 cells show higher levels of the neuronal marker beta III tubulin. Interestingly, Ns differentiation, by Epidermal Growth Factors (EGF) and Fibroblast Growth Factor 2 (bFGF) withdrawal, generates oligodendrocytes at high-yield as shown by the expression of markers, Galactosylceramidase (Gal-C) Neuron-Glial antigen 2 (NG2), Receptor-Interacting Protein (RIP) and Myelin Basic Protein (MBP). Finally, upon co-culture, Ns-A1-derived oligodendrocytes cause a redistribution of contactin-associated protein (Caspr/paranodin) protein on neuronal cells, as primary oligodendrocytes cultures, suggesting that they are able to form compact myelin. Thus, Ns-A1-derived oligodendrocytes may represent a time-saving and low-cost tool to study the pathophysiology of oligodendrocytes and to test new drugs.

High‐Yield and Low‐Cost Solar Water Purification via Hydrogel‐Based Membrane Distillation

2021 ◽  
pp. 2101036
Author(s):  
Hengyi Lu ◽  
Wen Shi ◽  
Fei Zhao ◽  
Wenjing Zhang ◽  
Peixin Zhang ◽  
...  
Keyword(s):  
Water Purification ◽  
Low Cost ◽  
Membrane Distillation ◽  
High Yield ◽  
Solar Water

scholarly journals Bimetallic Ni-Based Catalysts for CO2 Methanation: A Review

Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Anastasios I. Tsiotsias ◽  
Nikolaos D. Charisiou ◽  
Ioannis V. Yentekakis ◽  
Maria A. Goula
Keyword(s):  
Low Temperature ◽  
Noble Metals ◽  
Recent Progress ◽  
Low Cost ◽  
Alloy Formation ◽  
Co2 Methanation ◽  
High Performing ◽  
Mobile Sources ◽  
Low Dispersion ◽  
Made In

CO2 methanation has recently emerged as a process that targets the reduction in anthropogenic CO2 emissions, via the conversion of CO2 captured from point and mobile sources, as well as H2 produced from renewables into CH4. Ni, among the early transition metals, as well as Ru and Rh, among the noble metals, have been known to be among the most active methanation catalysts, with Ni being favoured due to its low cost and high natural abundance. However, insufficient low-temperature activity, low dispersion and reducibility, as well as nanoparticle sintering are some of the main drawbacks when using Ni-based catalysts. Such problems can be partly overcome via the introduction of a second transition metal (e.g., Fe, Co) or a noble metal (e.g., Ru, Rh, Pt, Pd and Re) in Ni-based catalysts. Through Ni-M alloy formation, or the intricate synergy between two adjacent metallic phases, new high-performing and low-cost methanation catalysts can be obtained. This review summarizes and critically discusses recent progress made in the field of bimetallic Ni-M (M = Fe, Co, Cu, Ru, Rh, Pt, Pd, Re)-based catalyst development for the CO2 methanation reaction.

scholarly journals Low-temperature-processed metal oxide electron transport layers for efficient planar perovskite solar cells

Rare Metals ◽  
2021 ◽  
Author(s):  
Jia-Xing Song ◽  
Xin-Xing Yin ◽  
Zai-Fang Li ◽  
Yao-Wen Li
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Low Temperature ◽  
Metal Oxide ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Future Research ◽  
Low Temperature Preparation

Abstract As a promising photovoltaic technology, perovskite solar cells (pero-SCs) have developed rapidly over the past few years and the highest power conversion efficiency is beyond 25%. Nowadays, the planar structure is universally popular in pero-SCs due to the simple processing technology and low-temperature preparation. Electron transport layer (ETL) is verified to play a vital role in the device performance of planar pero-SCs. Particularly, the metal oxide (MO) ETL with low-cost, superb versatility, and excellent optoelectronic properties has been widely studied. This review mainly focuses on recent developments in the use of low-temperature-processed MO ETLs for planar pero-SCs. The optical and electronic properties of widely used MO materials of TiO2, ZnO, and SnO2, as well as the optimizations of these MO ETLs are briefly introduced. The commonly used methods for depositing MO ETLs are also discussed. Then, the applications of different MO ETLs on pero-SCs are reviewed. Finally, the challenge and future research of MO-based ETLs toward practical application of efficient planar pero-SCs are proposed. Graphical abstract

Low cost earthworm manure-derived carbon material for the adsorption of Cu 2+ from aqueous solution: Impact of pyrolysis temperature

2017 ◽  
Vol 98 ◽  
pp. 189-195 ◽  
Author(s):  
Bin Zhou ◽  
Zhanghong Wang ◽  
Dekui Shen ◽  
Fei Shen ◽  
Chunfei Wu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Carbon Material ◽  
Pyrolysis Temperature ◽  
Low Cost
Sign in / Sign up

Export Citation Format

Share Document