scholarly journals Monitoring the Process Based on Belief Statistic for Neutrosophic Gamma Distributed Product

Processes ◽  
2019 ◽  
Vol 7 (4) ◽  
pp. 209 ◽  
Author(s):  
Muhammad Aslam ◽  
Rashad A. R. Bantan ◽  
Nasrullah Khan
Keyword(s):  
Control Chart ◽  
Gamma Distribution ◽  
Average Run Length ◽  
Simulation Data ◽  
Run Length ◽  
Classical Statistics ◽  
The Mean ◽  
Uncertainty Environment ◽  
Mean Time

In this paper, we developed a control chart methodology for the monitoring the mean time between two events using the belief estimator under the neutrosophic gamma distribution. The proposed control chart coefficients and the neutrosophic average run length (NARL) have been determined using different process settings. The performance of the proposed chart is compared with the control chart under classical statistics in terms of NARL using the simulation data and real example. From comparisons, it is concluded that the proposed chart is efficient, effective and adequate to be used under uncertainty environment than the chart under classical statistics.

scholarly journals Design of a Control Chart Based on COM-Poisson Distribution for the Uncertainty Environment

Complexity ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Muhammad Aslam ◽  
Ali Hussein Al-Marshadi
Keyword(s):  
Poisson Distribution ◽  
Control Chart ◽  
Simulation Study ◽  
Average Run Length ◽  
Interval Method ◽  
Interval System ◽  
Run Length ◽  
Classical Statistics ◽  
Uncertainty Environment

This paper will introduce the neutrosophic COM-Poisson (NCOM-Poisson) distribution. Then, the design of the attribute control chart using the NCOM-Poisson distribution is given. The structure of the control chart under the neutrosophic statistical interval method will be given. The algorithm to determine the average run length under neutrosophic statistical interval system will be given. The performance of the proposed control chart is compared with the chart based on classical statistics in terms of neutrosophic average run length (NARL). A simulation study and a real example are also added. From the comparison of the proposed control chart with the existing chart, it is concluded that the proposed control chart is more efficient in detecting a shift in the process. Therefore, the proposed control chart will be helpful in minimizing the defective product. In addition, the proposed control chart is more adequate and effective to apply in uncertainty environment.

scholarly journals New Control Charts for a Multivariate Gamma Distribution

2021 ◽  
pp. 607-614
Author(s):  
Hamzeh Torabi ◽  
Shohreh Enami ◽  
STA Niaki
Keyword(s):  
Control Chart ◽  
Gamma Distribution ◽  
Control Charts ◽  
Normal Approximation ◽  
Average Run Length ◽  
Exact Distribution ◽  
Run Length ◽  
Multivariate Gamma Distribution ◽  
Satterthwaite Approximation

In this study, a multivariate gamma distribution is first introduced. Then, by defining a new statistic, three control charts called the MG charts, are proposed for this distribution. The first control chart is based on the exact distribution of this statistic, the second control chart is based on the Satterthwaite approximation, and the last is based on the normal approximation. Efficiency of the proposed control charts is evaluated by average run length (ARL) criterion.

An Attribute np Control Chart for Monitoring Mean Life Using Multiple Deferred State Sampling Based on Truncated Life Tests

2019 ◽  
Vol 26 (01) ◽  
pp. 1950004
Author(s):  
S. Balamurali ◽  
P. Jeyadurga
Keyword(s):  
Control Chart ◽  
Pareto Distribution ◽  
Average Run Length ◽  
Run Length ◽  
Manufacturing Process Control ◽  
The Status ◽  
Truncated Life Test ◽  
Life Tests ◽  
The Mean ◽  
Run Lengths

In this paper, we design an attribute [Formula: see text] control chart for monitoring the mean life of the product where the lifetime follows the Pareto distribution of the second kind. The lifetime of the product is determined by time truncated life test and the multiple deferred state sampling is used to declare the status of the manufacturing process. Control limit coefficients and multiple deferred state sampling parameters such as sample size and number of successive subgroups required to declare the state of the process are determined such that the in-control average run length is as near as possible to the target average run length. Out-of-control average run lengths are calculated for the determined parameters using various shift constants. The performance of the chart is compared with other existing chart in terms of average run length.

scholarly journals Water Particles Monitoring in the Atacama Desert: SPC Approach Based on Proportional Data

Axioms ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 154
Author(s):  
Anderson Fonseca ◽  
Paulo Henrique Ferreira ◽  
Diego Carvalho do Nascimento ◽  
Rosemeire Fiaccone ◽  
Christopher Ulloa-Correa ◽  
...  
Keyword(s):  
Control Chart ◽  
Average Run Length ◽  
Atacama Desert ◽  
Real Data ◽  
Interval Data ◽  
Total Quality ◽  
Statistical Process ◽  
Monte Carlo Simulation Study ◽  
Run Length ◽  
Study Results

Statistical monitoring tools are well established in the literature, creating organizational cultures such as Six Sigma or Total Quality Management. Nevertheless, most of this literature is based on the normality assumption, e.g., based on the law of large numbers, and brings limitations towards truncated processes as open questions in this field. This work was motivated by the register of elements related to the water particles monitoring (relative humidity), an important source of moisture for the Copiapó watershed, and the Atacama region of Chile (the Atacama Desert), and presenting high asymmetry for rates and proportions data. This paper proposes a new control chart for interval data about rates and proportions (symbolic interval data) when they are not results of a Bernoulli process. The unit-Lindley distribution has many interesting properties, such as having only one parameter, from which we develop the unit-Lindley chart for both classical and symbolic data. The performance of the proposed control chart is analyzed using the average run length (ARL), median run length (MRL), and standard deviation of the run length (SDRL) metrics calculated through an extensive Monte Carlo simulation study. Results from the real data applications reveal the tool’s potential to be adopted to estimate the control limits in a Statistical Process Control (SPC) framework.

scholarly journals Monitoring multinomial processes based on a weighted chi-square control chart

2021 ◽  
Vol 28 (3) ◽  
Author(s):  
Achouri Ali ◽  
Emira Khedhiri ◽  
Ramzi Talmoudi ◽  
Hassen Taleb
Keyword(s):  
Quality Improvement ◽  
Control Chart ◽  
Process Improvement ◽  
Average Run Length ◽  
The Other ◽  
Statistical Control ◽  
Chi Square ◽  
Crucial Step ◽  
Run Length ◽  
Control Situation

Abstract: Interpreting an out-of-control signal is a crucial step in monitoring categorical processes. For the Chi-Square Control Chart (CSCC), an out-of control situation does not specify if it was a process deterioration or a process improvement. For this reason, a weighted chi-square statistical control chart WSCC is proposed with different weighting categories in order to enable an accelerated disclosure of a control situation after a shift due to a deterioration of quality and on the other hand, decelerate an out of control situation after a shift due to a quality improvement. Furthermore, in comparison with Marcucci’s method, the new procedure provides an accurate and easier way to interpret several signals. In other words, the WSCC allows a faster detection of an out-of control situation in the case of a quality deterioration, however, an out-of control situation is not quickly detected in the case of a quality improvement. Indeed, comparative studies have been performed to find the best control chart for each combination. Concluding remarks with comments and recommendations are given based on Average Run Length (ARL) and standard deviation run length (SDRL).

scholarly journals Classification of the State of Manufacturing Process under Indeterminacy

Mathematics ◽  
2019 ◽  
Vol 7 (9) ◽  
pp. 870 ◽  
Author(s):  
Aslam ◽  
Hasan Arif
Keyword(s):  
Similarity Measure ◽  
Manufacturing Process ◽  
Average Run Length ◽  
The State ◽  
Run Length ◽  
Current State ◽  
Neutrosophic Statistics ◽  
Uncertainty Environment ◽  
Measure Index

In this paper, the diagnosis of the manufacturing process under the indeterminate environment is presented. The similarity measure index was used to find the probability of the in-control and the out-of-control of the process. The average run length (ARL) was also computed for various values of specified parameters. An example from the Juice Company is considered under the indeterminate environment. From this study, it is concluded that the proposed diagnosis scheme under the neutrosophic statistics is quite simple and effective for the current state of the manufacturing process under uncertainty. The use of the proposed method under the uncertainty environment in the Juice Company may eliminate the non-conforming items and alternatively increase the profit of the company.

On the Estimation Error in Zero-Inflated Poisson Model for Process Control

2003 ◽  
Vol 10 (02) ◽  
pp. 159-169 ◽  
Author(s):  
B. He ◽  
M. Xie ◽  
T. N. Goh ◽  
P. Ranjan
Keyword(s):  
Sample Size ◽  
Poisson Distribution ◽  
Control Chart ◽  
Average Run Length ◽  
Estimation Error ◽  
Accurate Estimate ◽  
Minimum Size ◽  
High Quality ◽  
Run Length ◽  
Run Length Distribution

The control chart based on a Poisson distribution has often been used to monitor the number of defects in sampling units. However, many false alarms could be observed due to extra zero counts, especially for high-quality processes. Therefore, some alternatives have been developed to alleviate this problem, one of which is the control chart based on the zero-inflated Poisson distribution. This distribution takes into account the extra zeros present in the data, and yield more accurate results than the Poisson distribution. However, implementing a control chart is often based on the assumption that the parameters are either known or an accurate estimate is available. For a high quality process, an accurate estimate may require a very large sample size, which is seldom available. In this paper the effect of estimation error is investigated. An analytical approximation is derived to compute shift detection probability and run length distribution. The study shows that the false alarm rates are higher than the desirable level for smaller values of the sample size. This is further supported by smaller average run length. In general, the quantitative results from this paper can be utilized to select a minimum size of the initial sample for estimating the control limits so that certain average run length requirements are met.

scholarly journals Multiple Dependent State Sampling-Based Chart Using Belief Statistic under Neutrosophic Statistics

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Ahmed Ibrahim Shawky ◽  
Muhammad Aslam ◽  
Khushnoor Khan
Keyword(s):  
Control Chart ◽  
Average Run Length ◽  
Control Process ◽  
Real Data ◽  
Process Conditions ◽  
Neutrosophic Statistics ◽  
The Mean ◽  
Run Lengths ◽  
Dependent State ◽  
Better Than

In this paper, a control chart scheme has been introduced for the mean monitoring using gamma distribution for belief statistics using multiple dependent (deferred) state sampling under the neutrosophic statistics. The coefficients of the control chart and the neutrosophic average run lengths have been estimated for specific false alarm probabilities under various process conditions. The offered chart has been compared with the existing classical chart through simulation and the real data. From the comparison, it is concluded that the performance of the proposed chart is better than that of the existing chart in terms of average run length under uncertain environment. The proposed chart has the ability to detect a shift quickly than the existing chart. It has been observed that the proposed chart is efficient in quick monitoring of the out-of-control process and a cherished addition in the toolkit of the quality control personnel.

Sign in / Sign up

Export Citation Format

Share Document