scholarly journals Physical, Mechanical, and Morphological Properties of Hybrid Cyrtostachys renda/Kenaf Fiber Reinforced with Multi-Walled Carbon Nanotubes (MWCNT)-Phenolic Composites

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3448
Author(s):  
Tamil Moli Loganathan ◽  
Mohamed Thariq Hameed Sultan ◽  
Mohammad Jawaid ◽  
Qumrul Ahsan ◽  
Jesuarockiam Naveen ◽  
...  
Keyword(s):  
Hybrid Composite ◽  
Weight Fraction ◽  
Fiber Composites ◽  
Milling Process ◽  
Synthetic Fiber ◽  
Morphological Properties ◽  
Homogeneous Distribution ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Impact Properties

Adequate awareness of sustainable materials and eco-legislation have inspired researchers to identify alternative sustainable and green composites for synthetic fiber-reinforced polymer composites in the automotive and aircraft industries. This research focused on investigating the physical, mechanical, and morphological properties of different hybrid Cyrtostachys renda (CR)/kenaf fiber (K) (10C:0K, 7C:3K, 5C:5K, 3C:7K, 0C:10K) reinforced with 0.5 wt% MWCNT–phenolic composites. We incorporated 0.5 wt% of MWCNT into phenolic resin (powder) using a ball milling process for 25 h to achieve homogeneous distribution. The results revealed that CR fiber composites showed higher voids content (12.23%) than pure kenaf fiber composites (6.57%). CR fiber phenolic composite was more stable to the swelling tendency, resulting in the lowest percentage of swelling rate (4.11%) compared to kenaf composite (5.29%). The addition of kenaf fiber into CR composites had improved the tensile, flexural, and impact properties. The highest tensile and flexural properties were found for weight fraction of CR and kenaf fiber at 5C:5K (47.96 MPa) and 3C:7K (90.89 MPa) composites, respectively. In contrast, the highest impact properties were obtained for 0C:10K composites (9.56 kJ/m2). Based on the FE-SEM image, the CR fiber lumen was larger in comparison to kenaf fiber. The lumen of CR fiber was attributed to higher void and water absorption, lower mechanical properties compared to kenaf fiber. 5C:5K composite was selected as an optimal hybrid composite, based on the TOPSIS method. This hybrid composite can be used as an interior component (non-load-bearing structures) in the aviation and automotive sectors.

Effect of benzoyl treatment on the performance of sugar palm/kenaf fiber-reinforced polypropylene hybrid composites

2021 ◽  
pp. 004051752110432
Author(s):  
S Mohd Izwan ◽  
SM Sapuan ◽  
MYM Zuhri ◽  
AR Muhamed
Keyword(s):  
Mechanical Properties ◽  
Mechanical Characteristics ◽  
Hybrid Composites ◽  
Physical And Mechanical Properties ◽  
Morphological Properties ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
A Value ◽  
Hydrophobic Behavior ◽  
Sugar Palm Fiber

The main purpose of this work is to investigate the effect of benzoyl treatment on the performance of sugar palm/kenaf fiber-reinforced polypropylene hybrid composites. Water absorption tests were carried out to confirm the effect of benzoylation treatment toward fabricating a more hydrophobic behavior of the hybrid composites. Both treated and untreated composites that have 10 wt.% of fiber loading with three different fiber ratios between sugar palm and kenaf (7:3, 5:5, 3:7) were analyzed. Physical and mechanical properties such as tensile, flexural, and impact strength were determined from this study. Morphological properties were obtained using scanning electron microscopy (SEM). It was found that the tensile strength of sugar palm/kenaf-reinforced polypropylene hybrid composites was improved with the treatment of benzoyl with a value of 19.41 MPa. In addition, hybrid composite with treated sugar palm and kenaf fiber T-SP3K7 recorded the highest impact and flexural strength of 19.4 MPa and 18.4 MPa, respectively. In addition, SEM demonstrated that surface treatment enhanced the mechanical properties of the hybrid composites. Overall, it can be suggested that benzoyl-treated composites with a higher volume of kenaf fiber than sugar palm fiber will improve the mechanical characteristics of the hybrid composites.

Characterization of natural – Synthetic fiber reinforced epoxy based composite – Hybridization of kenaf fiber and kevlar fiber

2020 ◽  
Author(s):  
Muthukumaran Ramasamy ◽  
Ajith Arul Daniel ◽  
M. Nithya ◽  
S. Sathees Kumar ◽  
R. Pugazhenthi
Keyword(s):  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Kevlar Fiber

scholarly journals Effect of Environmental Degradation on Mechanical Properties of Kenaf/Polyethylene Terephthalate Fiber Reinforced Polyoxymethylene Hybrid Composite

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Mohamad Zaki Abdullah ◽  
Yakubu Dan-mallam ◽  
Puteri Sri Melor Megat Yusoff
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Environmental Degradation ◽  
Hybrid Composite ◽  
Fiber Composite ◽  
Accelerated Weathering ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Pet Fibers ◽  
Outdoor Application

The main objective of this research is to investigate the effect of environmental degradation on the mechanical properties of kenaf/PET fiber reinforced POM hybrid composite. Kenaf and PET fibers were selected as reinforcements because of their good mechanical properties and resistance to photodegradation. The test samples were produced by compression molding. The samples were exposed to moisture, water spray, and ultraviolet penetration in an accelerated weathering chamber for 672 hours. The tensile strength of the long fiber POM/kenaf (80/20) composite dropped by 50% from 127.8 to 64.8 MPa while that of the hybrid composite dropped by only 2% from 73.8 to 72.5 MPa. This suggests that the hybrid composite had higher resistance to tensile strength than the POM/kenaf composite. Similarly, the results of flexural and impact strengths also revealed that the hybrid composite showed less degradation compared to the kenaf fiber composite. The results of the investigation revealed that the hybrid composite had better retention of mechanical properties than that of the kenaf fiber composites and may be suitable for outdoor application in the automotive industry.

scholarly journals Mechanical Properties of Banana Fabric and Kenaf Fiber Reinforced Epoxy Composites: Effect of Treatment and Hybridization

2019 ◽  
Vol 8 (10) ◽  
pp. 1870-1874
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Reinforced Composites ◽  
Synthetic Fiber ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite

Nowadays, Natural Fiber Reinforced composites (NFCs) are emerging to be a good substitute for synthetic fiber reinforced composites as NFCs have many advantages such as low density, high specific strength, recyclability, low cost and good sound abatement quality etc. Among all types of NFCs, a vast study has been done on banana fiber and kenaf fiber reinforced composite. However, only limited work has been done on the banana fabric, kenaf fiber reinforced composite and the effect of their hybridization on mechanical properties. In this paper, an attempt has been made to study the mechanical properties of the banana fabric, kenaf fiber and hybrid banana fabric/kenaf fiber reinforced composites. Effect of alkali treatment on kenaf fiber reinforced composite is discussed in the paper. For the present work, plain-woven banana fabric and randomly oriented kenaf fiber are used as reinforcement while the epoxy resin is used as a matrix. samples are fabricated using hand lay-up and vacuum bagging method. Curing is done at ambient temperature (250C-300C) for 48h. Tensile, impact and hardness test has been performed on a specimen according to ASTM standards. Improvement in mechanical properties is observed after alkali (6% NaOH) treatment on kenaf fiber reinforced composite. Tensile testing behavior of randomly oriented kenaf fiber composite has been studied using Finite element method and results are compared with experimental investigations. This topic present big potential because it seeks to find solution for sustainable development with environmental concerns.

scholarly journals Analysis of Cryogenic Impact Properties for a Glass-Fiber-Reinforced Dicyclopentadiene with a Different Amount of Decelerator Solution

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3246
Author(s):  
Ji Ho Jeon ◽  
Woo Il Lee ◽  
Jong Min Choi ◽  
Sung Woong Choi
Keyword(s):  
Glass Fiber ◽  
Weight Fraction ◽  
Expansion Ratio ◽  
Impact Behavior ◽  
Fiber Reinforced ◽  
Impact Properties ◽  
Chemical Corrosion ◽  
Low Viscosity ◽  
Glass Fiber Reinforced ◽  
The Impact

Composites using dicyclopentadiene (DCPD) as a matrix have gained significant popularity owing to their excellent impact and chemical corrosion resistance. In the present study, experiments addressing the impact behavior of glass-fiber-reinforced DCPD were conducted to quantitatively evaluate its impact properties. The glass-fiber-reinforced polydicyclopentadiene composite utilized in impact tests was manufactured using structural reaction injection molding (S-RIM) because of its fast curing characteristics and low viscosity. The impact properties of the glass-fiber-reinforced DCPD (GF/DCPD) were quantitatively evaluated by varying its fiber content and decelerator solution. The impact properties of neat DCPD and GF/DCPD composites were examined with different amounts of decelerator solution under various temperatures from room temperature to cryogenic temperature to observe the ductile-to-brittle transition temperature (DBTT). With an increase in the fiber weight fraction of the GF/DCPD composite, the effect of the DBTT significantly decreased. However, the decreasing rate retarded as the weight fraction of the GF increased. The decreased DBTT with the addition of GF in the GF/DCPD can be attributed to the differences in the thermal expansion ratio and the interfacial force between neat DCPD and the fiber. A fractograph analysis demonstrates that the effect of the brittle (smooth) surface resulted in a lower impact absorbed energy when the temperature decreased, along with the increased amount of the decelerator.

Synthesis and Characterization of Multi Wall Carbon Nanotube (MWCNT) Filled Hybrid Banana-Glass Fiber Reinforced Composites

2015 ◽  
Vol 766-767 ◽  
pp. 193-198 ◽  
Author(s):  
T. Rajmohan ◽  
K. Mohan ◽  
K. Palanikumar
Keyword(s):  
Glass Fiber ◽  
Natural Fiber ◽  
Testing Machine ◽  
Fiber Reinforced Composites ◽  
Synthetic Fiber ◽  
Homogeneous Distribution ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Compression Tests ◽  
Glass Fiber Reinforced

Natural Fiber Reinforced Composite (NFRC) are used by replacing Synthetic Fiber Reinforced Composites (SFRC) because of its poor reusability, recycling, bio degradability. Even though NFRC are lack in thermal stability, strength degradation, water absorption and poor impact properties. The hybridization and nanoparticles mixed in different polymers are used to improve mechanical and wear properties of the polymer composites. In the present investigation Multi wall carbon nanotubes (MWCNT) dispersed in Epoxy resin using ultrasonic bath sonicator are used as matrix face for hybrid banana-Glass Fiber Reinforced Plastics composite materials which is manufactured by compression molding processes. As per ASTM standards tensile, compression tests are carried out by using Universal Testing Machine. Microstructure of samples are investigated by scanning electron microscope (SEM) with Energy dispersive X-ray (EDS). SEM shows the homogeneous distribution of the fiber in the modified polymer matrix. The results indicated that the increase in weight % of MWCNT improves the mechanical properties of MWCNT filled hybrid natural fiber composites.

scholarly journals Development and Analysis of Mechanical Properties of Caryota and Sisal Natural Fibers Reinforced Epoxy Hybrid Composites

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 864
Author(s):  
Ayyappa Atmakuri ◽  
Arvydas Palevicius ◽  
Lalitnarayan Kolli ◽  
Andrius Vilkauskas ◽  
Giedrius Janusas
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Research Work ◽  
Fiber Composites ◽  
Single Fiber ◽  
Synthetic Fiber ◽  
Sisal Fiber ◽  
Fiber Reinforced

In recent years, natural fiber reinforced polymer composites have gained much attention over synthetic fiber composites because of their many advantages such as low-cost, light in weight, non-toxic, non-abrasive, and bio-degradable properties. Many researchers have found interest in using epoxy resin for composite fabrication over other thermosetting and thermoplastic polymers due to its dimensional stability and mechanical properties. In this research work, the mechanical and moisture properties of Caryota and sisal fiber-reinforced epoxy resin hybrid composites were investigated. The main objective of these studies is to develop hybrid composites and exploit their importance over single fiber composites. The Caryota and sisal fiber reinforced epoxy resin composites were fabricated by using the hand lay-up technique. A total of five different samples (40C/0S, 25C/15S, 20C/20S, 15C/25S, 0C/40S) were developed based on the rule of hybridization. The samples were allowed for testing to evaluate their mechanical, moisture properties and the morphology was studied by using the scanning electron microscope analysis. It was observed that hybrid composites have shown improved mechanical properties over the single fiber (Individual fiber) composites. The moisture studies stated that all the composites were responded to the water absorption but single fiber composites absorbed more moisture than hybrid composites.

Fatigue Behavior of Natural Fiber Reinforced Thermoplastic Composites in Dry and Wet Environments

2011 ◽  
Author(s):  
Ahmed Fotouh ◽  
John Wolodko
Keyword(s):  
Natural Fiber ◽  
Fatigue Behavior ◽  
Fiber Composites ◽  
Environmental Benefits ◽  
Thermoplastic Composite ◽  
Synthetic Fiber ◽  
Thermoplastic Composites ◽  
Natural Fiber Composites ◽  
Fiber Reinforced ◽  
Volume Fractions

Over the past decade, there has been an increased demand for products manufactured using sustainable materials. Natural fiber composites are seen as an excellent replacement for synthetic fiber composites due to their low density, good mechanical properties (stiffness), good thermal/acoustic insulation properties and environmental benefits (waste stream utilization and low carbon footprint). While there has been a considerable number of studies examining the short-term behavior of natural fiber composites, very limited work has been done to characterize their long-term durability under cyclic loading. In this study, the fatigue behavior of a natural fiber reinforced thermoplastic composite material was investigated. Cyclic fatigue experiments were conducted on hemp fiber reinforced high density polyethylene (HDPE) at various fiber volume fractions, and under both dry and wet ambient conditions. Using a stress level concept, a generalized model was developed to predict the fatigue life of the various composite formulations tested. The concept of pseudo-plastic flow was incorporated in the fatigue model to form a new model, which is capable of simulating fatigue behavior at different frequencies, fatigue stress ratios and volume fractions.

Investigation on Improvement of Mechanical Properties of Kenaf / E-Glass Fiber Composites by Mercerization Process

2011 ◽  
Vol 471-472 ◽  
pp. 227-232 ◽  
Author(s):  
Abdul Malek Ya’acob ◽  
Azhar Abu Bakar ◽  
Hanafi Ismail ◽  
Dahlan Khairul Mohd. Zaman
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Hybrid Composites ◽  
Weight Ratio ◽  
Fiber Composites ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Glass Fiber Composites

A hybrid composites mechanical properties consisting of un-treated and treated bast Kenaf fiber and E- glass fiber was investigated by varying the fiber glass weight ratio and using interplay fabrication method. A further comparison was made with corresponding properties of 100% wt E-glass fiber composites sample. The expected results were to have better composites performance in terms of toughness and impact strength as a comparison between the E- glass fiber reinforced composites and Kenaf fiber reinforced composites alone. All samples are prepared using typical samples preparation techniques. Result shows that the incorporation of E – glass fiber resulted in brittle failure and a higher amount of E-Glass fiber with low percentage of Kenaf fiber resulted in high strength, low ductile and low toughness behavior.

Sign in / Sign up

Export Citation Format

Share Document