scholarly journals Citrus Pomace Biomass as a Source of Pectin and Lignocellulose Fibers: From Waste to Upgraded Biocomposites for Mulching Applications

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1280
Author(s):  
Domenico Zannini ◽  
Giovanni Dal Poggetto ◽  
Mario Malinconico ◽  
Gabriella Santagata ◽  
Barbara Immirzi
Keyword(s):  
Raw Materials ◽  
Crop Protection ◽  
Cost Effective ◽  
Bioactive Molecules ◽  
Total Phenolic ◽  
Waste Biomass ◽  
Industrial Processing ◽  
South Italy ◽  
Suitable Combination ◽  
Citrus Waste

Citrus pomace derived from the industrial processing of juice and essential oils mostly consists of pectin, cellulose, hemicellulose, and simple sugars. In this work, citrus pomace waste from an agricultural company in South Italy was used as source of pectin. The extraction conditions of the polysaccharide were optimized using a suitable combination of time and a concentration of a mild organic solvent, such as acetic acid; thus recovering high Mw pectin and bioactive molecules (flavonoids and polyphenols). The pectin was structurally (GPC, FTIR), morphologically (SEM), thermally (TGA/DTG), and mechanically characterized, while bioactive molecules were separated and the total phenolic content (TPC) and total flavonoids content (TFC) were evaluated. With the aim to develop novel biocomposite-based materials, the pectin extracted from citrus waste was reinforced with different amounts of lignocellulose fractions also recovered from citrus waste after polysaccharide extraction, according to a “zero waste” circular economy approach. The prepared biocomposites were morphologically and mechanically characterized to be used as biodegradable mulching systems for crop protection. Thus, the citrus waste biomass was recovered, fractionated into its main raw materials, and these were recombined to develop novel upgraded biocomposites for mulching applications, by means of a cost-effective and eco-sustainable approach.

scholarly journals Adsorptive and Surface Characterization of Mediterranean Agrifood Processing Wastes: Prospection for Pesticide Removal

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 561
Author(s):  
José A. Fernández-López ◽  
Marta Doval Miñarro ◽  
José M. Angosto ◽  
Javier Fernández-Lledó ◽  
José M. Obón
Keyword(s):  
Functional Groups ◽  
Surface Characterization ◽  
Crystallinity Index ◽  
Zero Point ◽  
Cost Effective ◽  
Point Of Zero Charge ◽  
Waste Biomass ◽  
Global Challenge ◽  
Citrus Waste ◽  
Olive Mill

The sustainable management of biomass is a key global challenge that demands compliance with fundamental requirements of social and environmental responsibility and economic effectiveness. Strategies for the valorization of waste biomass from agrifood industries must be in line with sustainable technological management and eco-industrial approaches. The efficient bioremoval of the pesticides imazalil and thiabendazole from aqueous effluents using waste biomass from typically Mediterranean agrifood industries (citrus waste, artichoke agrowaste and olive mill residue) revealed that these residues may be transformed into cost-effective biosorbents. Agrifood wastes present irregular surfaces, many different sized pores and active functional groups on their surface, and they are abundant in nature. The surface and adsorptive properties of olive mill residue, artichoke agrowaste and citrus waste were characterized with respect to elemental composition, microstructure, crystallinity, pore size, presence of active functional groups, thermal stability, and point of zero charge. Olive mill residue showed the highest values of surface area (Brunauer–Emmett–Teller method), porosity, crystallinity index, and pH of zero point of charge. Olive mill residue showed the highest efficiency with sorption capacities of 9 mg·g−1 for imazalil and 8.6 mg·g−1 for thiabendazole.

Eco-Efficiency and Vulnerability of Agro-Ecosystems to Environmental Threats

2018 ◽  
Vol 12 (2) ◽  
pp. 25-32
Author(s):  
Amalia-Gianina Străteanu ◽  
Simona Nicoleta Stan
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Negative Impact ◽  
Plant Protection ◽  
Raw Materials ◽  
Crop Protection ◽  
Cost Effective ◽  
Plant Protection Products ◽  
Efficient Production ◽  
Beneficial Effects

Abstract Eco-efficiency is based on environmental, social and economic principles, focusing not only on the use of fewer natural resources (raw materials) and energy but also on the cost-effective use of new technologies (eco-innovation) for the same volume of production and generation of low waste (efficient production). Agro-ecosystems globally, once with the development of the pesticide industry (plant protection products) and under the influence of aggressive marketing, have been based on the large-scale application of big amounts (perhaps too high) of pesticides. Many of the pesticides used in agriculture have a high persistence and degrade very slowly, which leads to the soil, water and even air pollution, with negative effects on plants, animals and, implicitly, humans. If these are used in short term and at low concentrations, pesticides can have beneficial effects (crop protection and their conservation and prevention of vector-borne disease) but in large quantities and applied over a long period of time can be toxic to humans and with a negative impact on the environment and ecosystems (degrading essential ecosystem services).

UNIDO, Industrial Processing of Natural Resources. New York: United Nations. 1981. viii + 78pp.US $ 5.00. [United Nations Publication Sales No. E. 81. 11 . B.1]

1982 ◽  
Vol 21 (4) ◽  
pp. 329-333
Author(s):  
Rashid Aziz
Keyword(s):  
New York ◽  
United Nations ◽  
Industrial Development ◽  
Raw Materials ◽  
Developed Countries ◽  
Raw Material ◽  
Industrial Processing ◽  
Depth Study ◽  
Manufactured Exports ◽  
Year 2000

The book under review is a concise but fairly in-depth study of the prospects for export diversification from the Less Developed Countries (henceforth labeled as LDCs) particularly to Developed Countries (henceforth labeled as OCs). Given the multiple problems faced by the LOCs in exporting to the OCs - protectionist policies with regards to manufactured exports, volatility of prices obtained for raw material exports, etc. - the study analyses the potential for following an intermediate route. The important issues in the export of semi -processed and wholly processed raw materials are discussed. 111ese issues range from the problems and potentials for the location of processing facilities in the LOCs to the formulation of appropriate policies to encourage an export of processed goods rather than raw materials. Such policies will be useful both in solving the balance of-payments problems of the LDCs and in attaining the goal of the Lima Declaration and Plan of Action on Industrial Development and Co-operation, that called for 2S percent of world industrial production to be located in the LOCs by the year 2000.

scholarly journals End-of-Life Alternatives of Glass Reinforced Polyester Boat Hulls Compared by LCA

2018 ◽  
Vol 27 (4) ◽  
pp. 096369351802700 ◽  
Author(s):  
Mehmet Önal ◽  
Gökdeniz Neşer
Keyword(s):  
End Of Life ◽  
Environmental Impacts ◽  
Raw Materials ◽  
Weight Ratio ◽  
Cost Effective ◽  
Raw Material ◽  
Photochemical Oxidation ◽  
Human Toxicity ◽  
Vacuum Infusion ◽  
Infusion Method

Glass reinforced polyester (GRP), as a thermoset polymer composites, dominates boat building industry with its several advantages such as high strength/weight ratio, cohesiveness, good resistance to environment. However, proper recovering and recycling of GRP boats is became a current environmental requirement that should be met by the related industry. In this study, to propose in a cost effective and environmentally friendly way, Life Cycle Assessment (LCA) has been carried out for six scenarios include two moulding methods (namely Hand Lay-up Method, HLM and Vacuum Infusion Method, VIM) and three End-of-Life (EoL) alternatives(namely Extruding, Incineration and Landfill) for a recreational boat's GRP hulls. A case study from raw materials purchasing phase to disposal/recycling stages has been established taking 11 m length GRP boat hull as the functional unit. Analysis show that in the production phase, the impacts are mainly due to the use of energy (electricity), transport and raw material manufacture. Largest differences between the methods considered (HLM and VIM) can be observed in the factors of marine aquatic ecotoxicity and eutrophication while the closest ones are abiotic depletion, ozon layer depletion and photochemical oxidation. The environmental impact of VIM is much higher than HLM due to its higher energy consumption while vacuum infusion method has lower risk than hand lay-up method in terms of occupational health by using less raw material (resin) in a closed mold. In the comparison of the three EoL techniques, the mechanical way of recycling (granule extruding) shows better environmental impacts except terrestrial ecotoxicity, photochemical oxidation and acidification. Among the EoL alternatives, landfill has the highest environmental impacts except ‘global warming potential’ and ‘human toxicity’ which are the highest in extrusion. The main cause of the impacts of landfill is the transportation needs between the EoL boats and the licenced landfill site. Although it has the higher impact on human toxicity, incineration is the second cleaner alternative of EoL techniques considered in this study. In fact that the similar trend has been observed both in production and EoL phases of the boat. It is obvious that using much more renewable energy mix and greener transportation alternative can reduce the overall impact of the all phases considerably.

scholarly journals Process Modeling and Simulation of Tableting—An Agent-Based Simulation Methodology for Direct Compression

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 996
Author(s):  
Niels Lasse Martin ◽  
Ann Kathrin Schomberg ◽  
Jan Henrik Finke ◽  
Tim Gyung-min Abraham ◽  
Arno Kwade ◽  
...  
Keyword(s):  
Raw Materials ◽  
Pilot Scale ◽  
Physical Models ◽  
Agent Based Simulation ◽  
Validation Data ◽  
Agent Based ◽  
Industrial Processing ◽  
Digital Twins ◽  
Product And Process ◽  
The Impact

In pharmaceutical manufacturing, the utmost aim is reliably producing high quality products. Simulation approaches allow virtual experiments of processes in the planning phase and the implementation of digital twins in operation. The industrial processing of active pharmaceutical ingredients (APIs) into tablets requires the combination of discrete and continuous sub-processes with complex interdependencies regarding the material structures and characteristics. The API and excipients are mixed, granulated if required, and subsequently tableted. Thereby, the structure as well as the properties of the intermediate and final product are influenced by the raw materials, the parametrized processes and environmental conditions, which are subject to certain fluctuations. In this study, for the first time, an agent-based simulation model is presented, which enables the prediction, tracking, and tracing of resulting structures and properties of the intermediates of an industrial tableting process. Therefore, the methodology for the identification and development of product and process agents in an agent-based simulation is shown. Implemented physical models describe the impact of process parameters on material structures. The tablet production with a pilot scale rotary press is experimentally characterized to provide calibration and validation data. Finally, the simulation results, predicting the final structures, are compared to the experimental data.

scholarly journals Apple Pomace as a Source of Bioactive Polyphenol Compounds in Gluten-Free Breads

Antioxidants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 807
Author(s):  
Dorota Gumul ◽  
Rafał Ziobro ◽  
Jarosław Korus ◽  
Marek Kruczek
Keyword(s):  
Raw Materials ◽  
Apple Pomace ◽  
Total Phenolic ◽  
Gluten Free ◽  
Bioactive Substances ◽  
Free Products ◽  
Total Polyphenol ◽  
Polyphenol Compounds ◽  
High Oxidative Stress ◽  
Vegetables And Fruits

Gluten-free products based on starch and hydrocolloids are deficient in nutrients and do not contain pro-health substances. Therefore, they should be enriched in raw materials naturally rich in antioxidants, especially if they are intended for celiac patients, prone to high oxidative stress. Apart from the traditionally used pseudo-cereals, seeds, vegetables and fruits, innovative substrates such as the by-product (especially in Poland) dry apple pomace could be applied. The study material consisted of gluten-free bread enriched with apple pomace. The content of individual polyphenols, the content of total polyphenol and flavonoids, and also the antioxidant potential of the bread were determined by the UPLC-PDA-MS/MS methods. It was observed that apple pomace was a natural concentrate of bioactive substances from the group of polyphenols. In summary, gluten-free bread with 5% content of apple pomace showed the highest organoleptic scores and contained high levels of phenolic compounds. The values of total phenolic content, and the amounts of flavonoids, phenolic acids and phloridzin in this bread were 2.5, 8, 4 and 21 times higher in comparison to control.

scholarly journals Antimicrobial, Antioxidant, and Cytotoxic Activities of Juglans regia L. Pellicle Extract

Antibiotics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 159
Author(s):  
Floriana D’Angeli ◽  
Giuseppe Antonio Malfa ◽  
Adriana Garozzo ◽  
Giovanni Li Volti ◽  
Carlo Genovese ◽  
...  
Keyword(s):  
Herpes Simplex ◽  
Juglans Regia ◽  
Radical Scavenging ◽  
Fungal Growth ◽  
Bioactive Molecules ◽  
Total Phenolic ◽  
Cytotoxic Activities ◽  
Dependent Manner ◽  
Anion Formation ◽  
Herpes Simplex Viruses

The difficulty to treat resistant strains-related hospital-acquired infections (HAIs) promoted the study of phytoextracts, known sources of bioactive molecules. Accordingly, in the present study, the pharmacological activities of Juglans regia (L.) pellicle extract (WPE) were investigated. The antiviral effect was tested against Herpes simplex virus type 1 and 2, Poliovirus 1, Adenovirus 2, Echovirus 9, Coxsackievirus B1 through the plaque reduction assay. The antibacterial and antifungal activities were evaluated against medically important strains, by the microdilution method. DPPH and superoxide dismutase (SOD)s-like activity assays were used to determine the antioxidant effect. Besides, the extract was screened for cytotoxicity on Caco-2, MCF-7, and HFF1 cell lines by the 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay. The total phenolic and flavonoid contents were also evaluated. Interestingly, WPE inhibited Herpes simplex viruses (HSVs) replication, bacterial and fungal growth. WPE showed free radical scavenging capacity and inhibited superoxide anion formation in a dose-dependent manner. These effects could be attributed to the high content of phenols and flavonoids, which were 0.377 ± 0.01 mg GE/g and 0.292 ± 0.08 mg CE/g, respectively. Moreover, WPE was able to reduce Caco-2 cell viability, at both 48 h and 72 h. The promising results encourage further studies aimed to better elucidate the role of WPE in the prevention of human infectious diseases.

scholarly journals Phytochemicals and Antioxidant Activity in Oat-Buckwheat Dough and Cookies with Added Spices or Herbs

Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2267
Author(s):  
Małgorzata Starowicz ◽  
Saruhan Arpaci ◽  
Joanna Topolska ◽  
Małgorzata Wronkowska
Keyword(s):  
Antioxidant Activity ◽  
Phenolic Content ◽  
Weight Basis ◽  
Bioactive Molecules ◽  
Total Phenolic ◽  
Antioxidant Power ◽  
Wide Range ◽  
Confectionery Products ◽  
Ferric Reducing Antioxidant Power ◽  
Phytochemical Contents

The aim of this study was to determine the phytochemicals and antioxidant activity in oat-buckwheat doughs and cookies with the addition of ten selected spices or herbs (2 g/100 g flours weight basis). The used spices and herbs, as was expected, showed a wide range of bioactive molecules, namely phenolic acids and flavonoids, and they are a rich source of components with antioxidant potential. All analysed oat-buckwheat dough showed higher antioxidant activity potential and higher total phenolic content (TPC) compared to cookies. The highest TPC was found in clove, both dough and cookies, with its addition showing the highest ferric reducing antioxidant power. Generally, cookies with the addition of spice/herbs showed higher phytochemical contents and antioxidant activity compared to oat-buckwheat cookies without the condiment. The technology of obtaining confectionery products, like oat-buckwheat cookies, that will favor the protection of bioactive compounds should still be improved.

scholarly journals Study on microcrystalline cellulose/chitosan blend foam gel material

2020 ◽  
Vol 27 (1) ◽  
pp. 424-432
Author(s):  
Hongkai Zhao ◽  
Kehan Zhang ◽  
Shoupeng Rui ◽  
Peipei Zhao
Keyword(s):  
Microcrystalline Cellulose ◽  
Raw Materials ◽  
Pore Space ◽  
Sodium Dodecyl ◽  
Cost Effective ◽  
High Water ◽  
Aldehyde Group ◽  
Sem Analysis ◽  
Present Contribution ◽  
Bet Analysis

AbstractIn the present contribution, an environmental-friendly and cost-effective adsorbent was reported for soil treatment and desertification control. A novel foam gel material was synthesized here by the physical foaming in the absence of catalyst. By adopting modified microcrystalline cellulose and chitosan as raw materials and sodium dodecyl sulfonate (SDS) as foaming agent, a microcrystalline cellulose/chitosan blend foam gel was synthesized. It is expected to replace polymers derived from petroleum for agricultural applications. In addition, a systematical study was conducted on the adsorbability, water holding capacity and re-expansion performance of foam gel in deionized water and brine under different SDS concentrations (2%–5%) as well as adsorption time. To be specific, the adsorption capacity of foam gel was up to 105g/g in distilled water and 54g/g in brine, indicating a high water absorption performance. As revealed from the results of Fourier transform infrared spectroscopy (FTIR) analysis, both the amino group of chitosan and the aldehyde group modified by cellulose were involved. According to the results of Scanning electron microscope (SEM) analysis, the foam gel was found to exhibit an interconnected pore network with uniform pore space. As suggested by Bet analysis, the macroporous structure was formed in the sample, and the pore size ranged from 0 to 170nm. The mentioned findings demonstrated that the foam gel material of this study refers to a potential environmental absorbent to improve soil and desert environments. It can act as a powerful alternative to conventional petroleum derived polymers.

scholarly journals Study of the Incorporation of Biomass Bottom Ash as a Filler for Discontinuous Grading Bituminous Mixtures with Bitumen Emulsion

2021 ◽  
Vol 11 (8) ◽  
pp. 3334
Author(s):  
Jorge Suárez-Macías ◽  
Juan María Terrones-Saeta ◽  
Francisco Javier Iglesias-Godino ◽  
Francisco Antonio Corpas-Iglesias
Keyword(s):  
Raw Materials ◽  
Bottom Ash ◽  
Chemical Properties ◽  
Physical And Mechanical Properties ◽  
Waste Biomass ◽  
Bituminous Mixtures ◽  
Bitumen Emulsion ◽  
Main Disadvantage ◽  
Physical And Chemical ◽  
And Chemical Properties

Energy consumption, because of population development, is progressively increasing. For this reason, new sources of energy are being developed, such as that produced from the combustion of biomass. However, this type of renewable energy has one main disadvantage, the production of waste. Biomass bottom ash is a residue of this industry that currently has not much use. For this reason, this research evaluates its use as a filler in bituminous mixtures, since this sector also has a significant impact on the environment, as it requires large quantities of raw materials. With this objective, first, the physical and chemical properties of biomass bottom ashes were evaluated, verifying their characteristics for their use as filler. Subsequently, bituminous mixtures were conformed with biomass bottom ash as filler, and their physical and mechanical properties were analyzed through particle loss and Marshall tests. The results of these tests were compared with those obtained with the same type of mixture but with conventional and ophite aggregates. This study confirmed that biomass bottom ash was viable for use as a filler, creating mixtures with a higher percentage of bitumen, better mechanical behavior, and similar physical properties. In short, more sustainable material for roads was obtained with waste currently condemned to landfill.

Sign in / Sign up

Export Citation Format

Share Document