scholarly journals Biomedical Applications of Bacteria-Derived Polymers

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1081
Author(s):  
Jonathan David Hinchliffe ◽  
Alakananda Parassini Parassini Madappura ◽  
Syed Mohammad Daniel Syed Mohamed ◽  
Ipsita Roy

Plastics have found widespread use in the fields of cosmetic, engineering, and medical sciences due to their wide-ranging mechanical and physical properties, as well as suitability in biomedical applications. However, in the light of the environmental cost of further upscaling current methods of synthesizing many plastics, work has recently focused on the manufacture of these polymers using biological methods (often bacterial fermentation), which brings with them the advantages of both low temperature synthesis and a reduced reliance on potentially toxic and non-eco-friendly compounds. This can be seen as a boon in the biomaterials industry, where there is a need for highly bespoke, biocompatible, processable polymers with unique biological properties, for the regeneration and replacement of a large number of tissue types, following disease. However, barriers still remain to the mass-production of some of these polymers, necessitating new research. This review attempts a critical analysis of the contemporary literature concerning the use of a number of bacteria-derived polymers in the context of biomedical applications, including the biosynthetic pathways and organisms involved, as well as the challenges surrounding their mass production. This review will also consider the unique properties of these bacteria-derived polymers, contributing to bioactivity, including antibacterial properties, oxygen permittivity, and properties pertaining to cell adhesion, proliferation, and differentiation. Finally, the review will select notable examples in literature to indicate future directions, should the aforementioned barriers be addressed, as well as improvements to current bacterial fermentation methods that could help to address these barriers.

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Ziyu Ge ◽  
Luming Yang ◽  
Fang Xiao ◽  
Yani Wu ◽  
Tingting Yu ◽  
...  

Graphene family nanomaterials, with superior mechanical, chemical, and biological properties, have grabbed appreciable attention on the path of researches seeking new materials for future biomedical applications. Although potential applications of graphene had been highly reviewed in other fields of medicine, especially for their antibacterial properties and tissue regenerative capacities, in vivo and in vitro studies related to dentistry are very limited. Therefore, based on current knowledge and latest progress, this article aimed to present the recent achievements and provide a comprehensive literature review on potential applications of graphene that could be translated into clinical reality in dentistry.


Molecules ◽  
2018 ◽  
Vol 23 (11) ◽  
pp. 2849 ◽  
Author(s):  
Renan Araújo ◽  
Soraya Santos ◽  
Elizabeth Igne Ferreira ◽  
Jeanine Giarolla

Dendrimers are nanoscopic compounds, which are monodispersed, and they are generally considered as homogeneous. PAMAM (polyamidoamine) was introduced in 1985, by Donald A. Tomalia, as a new class of polymers, named ‘starburst polymers’. This important contribution of Professor Tomalia opened a new research field involving nanotechnological approaches. From then on, many groups have been using PAMAM for diverse applications in many areas, including biomedical applications. The possibility of either linking drugs and bioactive compounds, or entrapping them into the dendrimer frame can improve many relevant biological properties, such as bioavailability, solubility, and selectivity. Directing groups to reach selective delivery in a specific organ is one of the advanced applications of PAMAM. In this review, structural and safety aspects of PAMAM and its derivatives are discussed, and some relevant applications are briefly presented. Emphasis has been given to gene delivery and targeting drugs, as advanced delivery systems using PAMAM and an incentive for its use on neglected diseases are briefly mentioned.


Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1083
Author(s):  
Pariya Zare ◽  
Mina Aleemardani ◽  
Amelia Seifalian ◽  
Zohreh Bagher ◽  
Alexander M. Seifalian

Desirable carbon allotropes such as graphene oxide (GO) have entered the field with several biomedical applications, owing to their exceptional physicochemical and biological features, including extreme strength, found to be 200 times stronger than steel; remarkable light weight; large surface-to-volume ratio; chemical stability; unparalleled thermal and electrical conductivity; and enhanced cell adhesion, proliferation, and differentiation properties. The presence of functional groups on graphene oxide (GO) enhances further interactions with other molecules. Therefore, recent studies have focused on GO-based materials (GOBMs) rather than graphene. The aim of this research was to highlight the physicochemical and biological properties of GOBMs, especially their significance to biomedical applications. The latest studies of GOBMs in biomedical applications are critically reviewed, and in vitro and preclinical studies are assessed. Furthermore, the challenges likely to be faced and prospective future potential are addressed. GOBMs, a high potential emerging material, will dominate the materials of choice in the repair and development of human organs and medical devices. There is already great interest among academics as well as in pharmaceutical and biomedical industries.


Author(s):  
Geetanjali Singh ◽  
Pramod Kumar Sharma ◽  
Rishabha Malviya

Aim/Objective: The author writes the manuscript by reviewing the literatures related to the biomedical application of metallic nanoparticles. The term metal nanoparticles are used to describe the nanosized metals with the dimension within the size range of 1-100 nm. Methods: The preparation of metallic nanoparticles and their application is an influential area for research. Among various physical and chemical methods (viz. chemical reduction, thermal decomposition, etc.) for synthesizing silver nanoparticles, biological methods have been suggested as possible eco-friendly alternatives. The synthesis of metallic nanoparticles is having many problems inclusive of solvent toxicity, the formation of hazardous byproducts and consumption of energy. So it is important to design eco-friendly benign procedures for the synthesis of metallic nanoparticles. Results: From the literature survey, we concluded that metallic nanoparticles have applications in the treatment of different diseases. Metallic nanoparticles are having a great advantage in the detection of cancer, diagnosis, and therapy. And it can also have properties such as antifungal, antibacterial, anti-inflammatory, antiviral and anti-angiogenic. Conclusion: In this review, recent upcoming advancement of biomedical application of nanotechnology and their future challenges has been discussed.


2020 ◽  
Vol 21 (17) ◽  
pp. 6382 ◽  
Author(s):  
Stanislav Kurpe ◽  
Sergei Grishin ◽  
Alexey Surin ◽  
Olga Selivanova ◽  
Roman Fadeev ◽  
...  

Controlling the aggregation of vital bacterial proteins could be one of the new research directions and form the basis for the search and development of antibacterial drugs with targeted action. Such approach may be considered as an alternative one to antibiotics. Amyloidogenic regions can, like antibacterial peptides, interact with the “parent” protein, for example, ribosomal S1 protein (specific only for bacteria), and interfere with its functioning. The aim of the work was to search for peptides based on the ribosomal S1 protein from T. thermophilus, exhibiting both aggregation and antibacterial properties. The biological system of the response of Gram-negative bacteria T. thermophilus to the action of peptides was characterized. Among the seven studied peptides, designed based on the S1 protein sequence, the R23I (modified by the addition of HIV transcription factor fragment for bacterial cell penetration), R23T (modified), and V10I (unmodified) peptides have biological activity that inhibits the growth of T. thermophilus cells, that is, they have antimicrobial activity. But, only the R23I peptide had the most pronounced activity comparable with the commercial antibiotics. We have compared the proteome of peptide-treated and intact T. thermophilus cells. These important data indicate a decrease in the level of energy metabolism and anabolic processes, including the processes of biosynthesis of proteins and nucleic acids. Under the action of 20 and 50 μg/mL R23I, a decrease in the number of proteins in T. thermophilus cells was observed and S1 ribosomal protein was absent. The obtained results are important for understanding the mechanism of amyloidogenic peptides with antimicrobial activity and can be used to develop new and improved analogues.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Nattaphop Noothuan ◽  
Kantamas Apitanyasai ◽  
Somsak Panha ◽  
Anchalee Tassanakajon

Abstract Objective Snails secrete different types of mucus that serve several functions, and are increasingly being exploited for medical and cosmetic applications. In this study, we explored the protein pattern and compared the biological properties of the mucus secreted from the mantle collar and foot of two snail species, Lissachatina fulica and Hemiplecta distincta. Result Protein profile showed a different pattern between the two species and between the two secretory parts. The mantle-specific protein bands were further characterized and among them was an antibacterial protein, achacin. Accordingly, the mucus from the mantle exhibited the higher antibacterial activity than that from the foot in both snail species. The mucus from H. distincta, first reported here, also showed antibacterial properties, but with a lower activity compared to that for L. fulica. Snail mucus also exhibited anti-tyrosinase activity and antioxidant activity but with no significant difference between the foot and mantle mucus. These results indicate some different protein compositions and biological activities of snail slime from the mantle and foot, which might be associated with their specific functions in the animal and are useful for medical applications.


2021 ◽  
Vol 22 (8) ◽  
pp. 4246
Author(s):  
Muhammad Maqbool ◽  
Qaisar Nawaz ◽  
Muhammad Atiq Ur Atiq Ur Rehman ◽  
Mark Cresswell ◽  
Phil Jackson ◽  
...  

In this study, as a measure to enhance the antimicrobial activity of biomaterials, the selenium ions have been substituted into hydroxyapatite (HA) at different concentration levels. To balance the potential cytotoxic effects of selenite ions (SeO32−) in HA, strontium (Sr2+) was co-substituted at the same concentration. Selenium and strontium-substituted hydroxyapatites (Se-Sr-HA) at equal molar ratios of x Se/(Se + P) and x Sr/(Sr + Ca) at (x = 0, 0.01, 0.03, 0.05, 0.1, and 0.2) were synthesized via the wet precipitation route and sintered at 900 °C. The effect of the two-ion concentration on morphology, surface charge, composition, antibacterial ability, and cell viability were studied. X-ray diffraction verified the phase purity and confirmed the substitution of selenium and strontium ions. Acellular in vitro bioactivity tests revealed that Se-Sr-HA was highly bioactive compared to pure HA. Se-Sr-HA samples showed excellent antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus carnosus) bacterial strains. In vitro cell–material interaction, using human osteosarcoma cells MG-63 studied by WST-8 assay, showed that Se-HA has a cytotoxic effect; however, the co-substitution of strontium in Se-HA offsets the negative impact of selenium and enhanced the biological properties of HA. Hence, the prepared samples are a suitable choice for antibacterial coatings and bone filler applications.


Nanoscale ◽  
2015 ◽  
Vol 7 (48) ◽  
pp. 20460-20473 ◽  
Author(s):  
Tianshu Wu ◽  
Keyu He ◽  
Qinglin Zhan ◽  
Shengjun Ang ◽  
Jiali Ying ◽  
...  

As quantum dots (QDs) are widely used in biomedical applications, the number of studies focusing on their biological properties is increasing.


Dose-Response ◽  
2021 ◽  
Vol 19 (2) ◽  
pp. 155932582110113
Author(s):  
Pamela Nair Silva-Holguín ◽  
Simón Yobanny Reyes-López

Researchers are currently looking for materials that are stable, functional, aesthetic, and biocompatible without infections. Therefore, there is a great interest in obtaining a material that has a balance between aesthetic, biological, mechanical, and functional factors, which can be used as an infection control material. The addition of hydroxyapatite to alumina make highly bioactive scaffolds with mechanical strength. Biomedical applications require antibacterial properties; therefore, this idea leads to great interest in the development of new synthetic routes of ceramic biomaterials that allow the release of nanoparticles or metal ions. This investigation presents the obtention of alumina-hydroxyapatite spheres doped with silver nanoparticles with antibacterial effect against various Gram-positive and negative bacteria related to drug-resistance infections. The microstructural and spectroscopic studies demonstrate that the spheres exhibit a homogeneous structure and crystal hydroxyapatite and silver nanoparticles are observed on the surface. The antimicrobial susceptibility was verified with the agar diffusion and turbidimetry methods in Gram-negative ( Escherichia coli and Pseudomonas aeruginosa) and Gram-positive ( Staphylococcus aureus and Bacillus subtilis) bacteria. All bacteria used were susceptible to the alumina-hydroxyapatite-silver spheres even at lower silver concentration. The composites have a higher possibility for medical applications focused on the control of drug-resistance microorganisms.


2021 ◽  
Author(s):  
E.K. Soltani ◽  
K. Zaim ◽  
K. Mokhnache ◽  
N. Haichour ◽  
S. Mezaache-Aichour ◽  
...  

The propolis, an extremely complex resinous material, exhibits valuable pharmacological and biological properties, mainly attributed to the presence of polyphenols. The composition of propolis depends on time, vegetation, and the area of collection. Total flavonoid and polyphenol contents of aqueous extracts of propolis samples from different areas of Algeria, determined by using aluminum chloride and Folin–Ciocalteu colorimetric methods, were in the range of 3.047 ± 0.004–5.273 ± 0.013 mg/g and 96.833 ± 0.027–458.833 ± 0.0005 mg/g crude extract of propolis, respectively. This study examined the antioxidant and antimicrobial activities of propolis. Aqueous extracts of propolis were obtained in order to evaluate their antioxidant activities by using 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging, β-carotene and electrochemical assays. All tested propolis samples had relatively strong antioxidant activities, which were also correlated with the total polyphenol and flavonoid content present. The percentage of inhibition of lipid peroxidation of linoleic acid emulsion during 24 h varied between 86.04 ± 0.42 and 90.60 ± 3.77% among the tested samples. The highest DPPH radical scavenging activity was observed by ABAL (Ain Abassa Aqueous Extract) with IC50 = 8.49 ± 5.07 10−5 μg/ml, and the lowest was observed by SAL (Setif Aqueous Extract) with IC50 of 21.16 ± 0.0001 μg/ml. The most important antibacterial activity was obtained with Ain Abassa extract; the zones of inhibition obtained for this excerpt vary from 15.22 to 15.5 mm. Followed by the Setif extract with areas of 12.33 to 12.75 mm, the Tizi-Ouzou extract with areas of 10.11 to 11.11 mm. This study will bring an innovation for further studies with regard to the antioxidant and antibacterial properties of the aqueous extracts of propolis. This study corroborates that Algerian propolis is a rich source of natural antioxidants, properties which could be used in the prevention of different diseases, both in humans and in animals.


Sign in / Sign up

Export Citation Format

Share Document