scholarly journals The Effects of Unbleached and Bleached Nanocellulose on the Thermal and Flammability of Polypropylene-Reinforced Kenaf Core Hybrid Polymer Bionanocomposites

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 116
Author(s):  
Fatimah Athiyah Sabaruddin ◽  
M.T. Paridah ◽  
S. M. Sapuan ◽  
R. A. Ilyas ◽  
Seng Hua Lee ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lignin Content ◽  
Hybrid Polymer ◽  
Residual Lignin ◽  
Flame Resistance ◽  
Melt Mixing ◽  
Kenaf Core ◽  
The Poor ◽  
Bonding Properties ◽  
Thermal Stability Of

The thermal, thermo-mechanical and flammability properties of kenaf core hybrid polymer nanocomposites reinforced with unbleached and bleached nanocrystalline cellulose (NCC) were studied. The studied chemical composition found that unbleached NCC (NCC-UB) had 90% more lignin content compared to bleached NCC (NCC-B). Nanocelluloses were incorporated within polypropylene (PP) as the matrix, together with kenaf core as a main reinforcement and maleic anhydride grafted polypropylene (MAPP) as a coupling agent via a melt mixing compounding process. The result showed that the thermal stability of the nanocomposites was generally affected by the presence of lignin in NCC-UB and sulfate group on the surface of NCC-B. The residual lignin in NCC-UB appeared to overcome the poor thermal stability of the composites that was caused by sulfation during the hydrolysis process. The lignin helped to promote the late degradation of the nanocomposites, with the melting temperature occurring at a relatively higher temperature of 219.1 °C for PP/NCC-UB, compared to 185.9 °C for PP/NCC-B. Between the two types of nanocomposites, PP/NCC-B had notably lower thermo-mechanical properties, which can be attributed to the poor bonding and dispersion properties of the NCC-B in the nanocomposites blend. The PP/NCC-UB showed better thermal properties due to the effect of residual lignin, which acted as a compatibilizer between NCC-UB and polymer matrix, thus improved the bonding properties. The residual lignin in PP/NCC-UB helped to promote char formation and slowed down the burning process, thus increasing the flame resistance of the nanocomposites. Overall, the residual lignin on the surface of NCC-UB appeared to aid better stability on the thermal and flammability properties of the nanocomposites.

Towards understanding the poor thermal stability of V5+ electrolyte solution in Vanadium Redox Flow Batteries

2011 ◽  
Vol 196 (7) ◽  
pp. 3669-3672 ◽  
Author(s):  
M. Vijayakumar ◽  
Liyu Li ◽  
Gordon Graff ◽  
Jun Liu ◽  
Huamin Zhang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Electrolyte Solution ◽  
Redox Flow Batteries ◽  
The Poor ◽  
Flow Batteries ◽  
Vanadium Redox ◽  
Thermal Stability Of

Effects of de-polymerized lignin content on thermo-oxidative and thermal stability of polyethylene

2019 ◽  
Vol 140 ◽  
pp. 413-422 ◽  
Author(s):  
Afsana S. Kabir ◽  
Hongwei Li ◽  
HonZhongshun Yuan ◽  
Takashi Kuboki ◽  
Chunbao (Charles) Xu
Keyword(s):  
Thermal Stability ◽  
Lignin Content ◽  
Thermal Stability Of

Palm Kernel Shell Filled Recycled High-Density Polyethylene: Effect of Filler Loading

2016 ◽  
Vol 857 ◽  
pp. 191-195 ◽  
Author(s):  
A. Nadiatul Husna ◽  
Bee Ying Lim ◽  
H. Salmah ◽  
Chun Hong Voon
Keyword(s):  
Thermal Stability ◽  
High Density Polyethylene ◽  
Thermo Gravimetric Analysis ◽  
Palm Kernel ◽  
Filler Loading ◽  
High Density ◽  
Gravimetric Analysis ◽  
Melt Mixing ◽  
Palm Kernel Shell ◽  
Thermal Stability Of

Palm kernel shells (PKS) filled recycled high density polyethylene (rHDPE) biocomposites were produced using melt mixing. The biocomposites were prepared on Brabender Plasticorder at temperature of 185 °C and rotor speed of 50 rpm by varying filler loading (0 to 40 phr). In this study, the effect of PKS loading on rheological properties and thermal stability of rHDPE/PKS were investigated. Rheological study of the biocomposites was carried out by means of capillary rheometer under temperature of 190 °C, 200 °C and 210 °C. Thermal properties of biocomposites were studied by using thermo gravimetric analysis (TGA). The rheological results showed that the flowability of the composite increased with increasing temperature. Meanwhile, the result of TGA showed that at higher PKS loading, rHDPE/PKS biocomposites had lower total weight loss. The thermal stability of the biocomposites was reduced due to the addition of filler loading.

Thermal and Thermomechanical Properties of Poly(butylene succinate) Nanocomposites

2008 ◽  
Vol 8 (4) ◽  
pp. 1679-1689 ◽  
Author(s):  
Mamookho E. Makhatha ◽  
Suprakas Sinha Ray ◽  
Joseph Hato ◽  
Adriaan S. Luyt
Keyword(s):  
Thermal Stability ◽  
Tensile Modulus ◽  
Melting Behavior ◽  
Mechanical Analysis ◽  
Thermomechanical Properties ◽  
Scanning Calorimetry ◽  
Melt Mixing ◽  
Butylene Succinate ◽  
Modulated Differential Scanning Calorimetry ◽  
Thermal Stability Of

This article describes the thermal and thermomechanical properties of poly(butylene succinate) (PBS) and its nanocomposites. PBS nanocomposites with three different weight ratios of organically modified synthetic fluorine mica (OMSFM) have been prepared by melt-mixing in a batch mixer at 140 °C. The structure and morphology of the nanocomposites were characterized by X-ray diffraction (XRD) analyses and transmission electron microscopy (TEM) observations that reveal the homogeneous dispersion of the intercalated silicate layers into the PBS matrix. The thermal properties of pure PBS and the nanocomposite samples were studied by both conventional and temperature modulated differential scanning calorimetry (DSC) analyses, which show multiple melting behavior of the PBS matrix. The investigation of the thermomechanical properties was performed by dynamic mechanical analysis. Results reveal significant improvement in the storage modulus of neat PBS upon addition of OMSFM. The tensile modulus of neat PBS is also increased substantially with the addition of OMSFM, however, the strength at yield and elongation at break of neat PBS systematically decreases with the loading of OMSFM. The thermal stability of the nanocomposites compared to that of the pure polymer sample was examined under both pyrolytic and thermooxidative environments. It is shown that the thermal stability of PBS is increased moderately in the presence of 3 wt% of OMSFM, but there is no significant effect on further silicate loading in the oxidative environment. In the nitrogen environment, however, the thermal stability systematically decreases with increasing clay loading.

scholarly journals Properties of Polylactic Acid Reinforced by Hydroxyapatite Modified Nanocellulose

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1009 ◽  
Author(s):  
Jianxiao Lu ◽  
Chuanyue Sun ◽  
Kexin Yang ◽  
Kaili Wang ◽  
Yingyi Jiang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Thermogravimetric Analysis ◽  
Thermodynamic Properties ◽  
Composite Film ◽  
Polylactic Acid ◽  
Tensile Modulus ◽  
The Poor ◽  
Thermal Stability Of

Polylactic acid (PLA) is one of the most promising bio-based materials, but its inherent hydrophobicity limits its application. Although nanocellulose (NCC) is a desirable reinforcement for PLA, the poor interface compatibility between the two has been a challenge. In this work, hydroxyapatite (HAP) modified NCC was prepared, and the obtained NCC/HAP reinforcement was used to prepare PLA/NCC-HAP composites. Different ratios of NCC to HAP were studied to explore their effects on the mechanical and thermodynamic properties of the composites. When the ratio of NCC to HAP was 30/70, the tensile strength and tensile modulus of the composite film reached 45.6 MPa and 2.34 GPa, respectively. Thermogravimetric analysis results indicate that thermal stability of the composites was significantly improved compared with pure PLA, reaching 346.6 °C. The above revelations show that NCC/HAP significantly improved the interface compatibility with PLA matrix.

scholarly journals Effect of Lignin Content on Properties of Flexible Transparent Poplar Veneer Fabricated by Impregnation with Epoxy Resin

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2602 ◽  
Author(s):  
Mengting Lu ◽  
Wen He ◽  
Ze Li ◽  
Han Qiang ◽  
Jizhou Cao ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Optical Properties ◽  
Solar Cells ◽  
Thermogravimetric Analysis ◽  
Epoxy Resin ◽  
Lignin Content ◽  
Light Transmittance ◽  
Smart Windows ◽  
Thermal Stability Of

In this work, poplar veneer (PV) rotary-cut from fast-growing polar was delignified to prepare flexible transparent poplar veneer (TPV). Lignin was gradually removed from the PV and then epoxy resin filled into the delignified PV. The study mainly concerns the effect of lignin content on microstructure, light transmittance, haze, tensile strength, and thermal stability of the PVs impregnated with epoxy resin. The results indicate that the lignin could be removed completely from the PV when the delignification time was around 8 h, which was proved by FTIR spectra and chemical component detection. Moreover, according to SEM observation and XRD testing, the porosity and crystallinity of the PVs were gradually increased with the removal of lignin. Also, the optical properties measurement indicated that the light transmittance and haze of the TPVs gradually increased, and the thermal stability also became more stable as shown by thermogravimetric analysis (TG). However, the tensile strength of the TPVs declined due to the removal of lignin. Among them, TPV8 exhibited excellent optical properties, thermal stability, and tensile strength. Consequently, it has great potential to be used as a substrate in photovoltaics, solar cells, smart windows, etc.

scholarly journals Mechanical and Thermal Properties of Montmorillonite-Reinforced Polypropylene/Rice Husk Hybrid Nanocomposites

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1557 ◽  
Author(s):  
Khaliq Majeed ◽  
Ashfaq Ahmed ◽  
Muhammad Saifullah Abu Bakar ◽  
Teuku Meurah Indra Mahlia ◽  
Naheed Saba ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Rice Husk ◽  
Hybrid Nanocomposites ◽  
Commercial Application ◽  
Mechanical And Thermal Properties ◽  
Melt Mixing ◽  
Compatibilizing Agent ◽  
Thermal Stability Of

In recent years, there has been considerable interest in the use of natural fibers as potential reinforcing fillers in polymer composites despite their hydrophilicity, which limits their widespread commercial application. The present study explored the fabrication of nanocomposites by melt mixing, using an internal mixer followed by a compression molding technique, and incorporating rice husk (RH) as a renewable natural filler, montmorillonite (MMT) nanoclay as water-resistant reinforcing nanoparticles, and polypropylene-grafted maleic anhydride (PP-g-MAH) as a compatibilizing agent. To correlate the effect of MMT delamination and MMT/RH dispersion in the composites, the mechanical and thermal properties of the composites were studied. XRD analysis revealed delamination of MMT platelets due to an increase in their interlayer spacing, and SEM micrographs indicated improved dispersion of the filler(s) from the use of compatibilizers. The mechanical properties were improved by the incorporation of MMT into the PP/RH system and the reinforcing effect was remarkable as a result of the use of compatibilizing agent. Prolonged water exposure of the prepared samples decreased their tensile and flexural properties. Interestingly, the maximum decrease was observed for PP/RH composites and the minimum was for MMT-reinforced and PP-g-MAH-compatibilized PP/RH composites. DSC results revealed an increase in crystallinity with the addition of filler(s), while the melting and crystallization temperatures remained unaltered. TGA revealed that MMT addition and its delamination in the composite systems improved the thermal stability of the developed nanocomposites. Overall, we conclude that MMT nanoclay is an effective water-resistant reinforcing nanoparticle that enhances the durability, mechanical properties, and thermal stability of composites.

scholarly journals Preparation of Molded Fiber Products from Hydroxylated Lignin Compounded with Lewis Acid-Modified Fibers Its Analysis

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1349
Author(s):  
Tianhao Liu ◽  
Ying Wang ◽  
Jin Zhou ◽  
Mengyang Li ◽  
Jinquan Yue
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Enzymatic Hydrolysis ◽  
Lewis Acid ◽  
Lignin Content ◽  
Hydrolysis Lignin ◽  
Molding Process ◽  
Ferrous Hydroxide ◽  
High Lignin Content ◽  
Thermal Stability Of

In this study, molded fiber products (MFPs) were prepared from lignin compounded with Lewis acid-modified fibers using enzymatic hydrolysis lignin (EHL) as a bio-phenol. The fibers were modified and compounded entirely through hot-pressing. To improve the reactivity of enzymatic lignin, hydroxylated enzymatic hydrolysis lignin (HEHL) was prepared by hydroxylation modification of purified EHL with hydrogen peroxide (H2O2) and ferrous hydroxide (Fe(OH)3). HEHL was mixed uniformly with Lewis acid-modified fibers on a pressure machine and modified during the molding process. The purpose of Lewis acid degradation of hemicellulose-converted furfural with HEHL was to generate a resin structure to improve the mechanical properties of a MFPs. The microstructure of the MFP was shown to be generated by resin structure, and it was demonstrated that HEHL was compounded on Lewis acid-modified fibers during the molding process. The thermal stability of the MFP with composite HEHL did not change significantly owing to the addition of lignin and had higher tensile strength (46.28 MPa) and flexural strength (65.26 MPa) compared to uncompounded and modified MFP. The results of this study are expected to promote the application of high lignin content fibers in molded fibers.

Effects of graphene on thermal properties and thermal stability of polycarbonate/graphene nanocomposite

2021 ◽  
pp. 089270572199788
Author(s):  
Md Amir Sohel ◽  
Abhijit Mondal ◽  
P Mohammad Arif ◽  
Sabu Thomas ◽  
Asmita SenGupta
Keyword(s):  
Thermal Stability ◽  
Thermal Decomposition ◽  
Glass Transition ◽  
Thermal Properties ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Multilayer Graphene ◽  
Melt Mixing ◽  
Graphene Nanocomposite ◽  
Thermal Stability Of

Polycarbonate (PC) /graphene nanocomposite was prepared using multilayer graphene (MLG) with loadings of 0.5, 1, and 3 wt% via melt mixing process. Morphological, structural, and thermal properties of the PC/MLG nanocomposites are investigated to look into the influence of MLG on the nanocomposite. A significant increase (∼6.4°C) in glass transition temperature is observed upon the addition of 3 wt% of MLG into the polycarbonate matrix. This increase in glass transition temperature may be due to the interaction between the MLG and polycarbonate polymer matrix. The specific heat capacity of pure PC and PC/MLG nanocomposites varies linearly with temperature below their glass transition. Upon the addition of MLGs, the overall thermal stability of PC/MLG nanocomposites increases with MLG loadings. A maximum increase about 29.23°C in T onset of thermal decomposition is observed in PC/MLG nanocomposite having 3 wt% of MLG loading. The activation energy ( Ea) of thermal decomposition is also calculated by kinetic analysis of thermal decomposition of the PC/MLG nanocomposites using Horowitz–Metzger and Broido’s methods.

Sign in / Sign up

Export Citation Format

Share Document