scholarly journals Mechanical and Thermal Properties of Montmorillonite-Reinforced Polypropylene/Rice Husk Hybrid Nanocomposites

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1557 ◽  
Author(s):  
Khaliq Majeed ◽  
Ashfaq Ahmed ◽  
Muhammad Saifullah Abu Bakar ◽  
Teuku Meurah Indra Mahlia ◽  
Naheed Saba ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Rice Husk ◽  
Hybrid Nanocomposites ◽  
Commercial Application ◽  
Mechanical And Thermal Properties ◽  
Melt Mixing ◽  
Compatibilizing Agent ◽  
Thermal Stability Of

In recent years, there has been considerable interest in the use of natural fibers as potential reinforcing fillers in polymer composites despite their hydrophilicity, which limits their widespread commercial application. The present study explored the fabrication of nanocomposites by melt mixing, using an internal mixer followed by a compression molding technique, and incorporating rice husk (RH) as a renewable natural filler, montmorillonite (MMT) nanoclay as water-resistant reinforcing nanoparticles, and polypropylene-grafted maleic anhydride (PP-g-MAH) as a compatibilizing agent. To correlate the effect of MMT delamination and MMT/RH dispersion in the composites, the mechanical and thermal properties of the composites were studied. XRD analysis revealed delamination of MMT platelets due to an increase in their interlayer spacing, and SEM micrographs indicated improved dispersion of the filler(s) from the use of compatibilizers. The mechanical properties were improved by the incorporation of MMT into the PP/RH system and the reinforcing effect was remarkable as a result of the use of compatibilizing agent. Prolonged water exposure of the prepared samples decreased their tensile and flexural properties. Interestingly, the maximum decrease was observed for PP/RH composites and the minimum was for MMT-reinforced and PP-g-MAH-compatibilized PP/RH composites. DSC results revealed an increase in crystallinity with the addition of filler(s), while the melting and crystallization temperatures remained unaltered. TGA revealed that MMT addition and its delamination in the composite systems improved the thermal stability of the developed nanocomposites. Overall, we conclude that MMT nanoclay is an effective water-resistant reinforcing nanoparticle that enhances the durability, mechanical properties, and thermal stability of composites.

Effect of Blend Ratio on the Mechanical and Thermal Properties of Polyurethane/Silicone Rubber Conductive Material

2018 ◽  
Vol 280 ◽  
pp. 264-269
Author(s):  
Heng Chun Wei ◽  
Teh Pei Leng ◽  
Yeoh Chow Keat
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Silicone Rubber ◽  
Conductive Filler ◽  
Material Testing ◽  
Testing System ◽  
Mechanical And Thermal Properties ◽  
Blend Ratio ◽  
Thermal Stability Of

This work reports on mechanical and thermal properties of a novel polymer blend. Blends were prepared by mixing silicone rubber with diphenyl – 4,4 – dissocyanate in different ratios. Graphene nanoplatelets was added as conductive filler to improve the electrical conductivity of the blends. The mechanical properties, including tensile and tear performances were measured by a material testing system. The thermal stability of the blends was measured by thermogravimetric analysis. Incorporation 20 vol.% of silicone rubber can help to improve the thermal stability of the blend, meanwhile optimum mechanical properties of the blends is achieved.

scholarly journals Investigation the effect of Graphene on The Morphology, Mechanical and Thermal properties of PLA/PMMA Blends

2015 ◽  
Vol 37 ◽  
pp. 15 ◽  
Author(s):  
Azin Paydayesh ◽  
Ahmad Aref Azar ◽  
Azam Jalali Arani
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Analysis ◽  
Thermal Properties ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Elongation At Break ◽  
Blend Morphology ◽  
Pmma Blends ◽  
Thermal Stability Of

In this work, Poly Lactic Acid/Poly methyl Methacrylate (PLA/PMMA) blends in various compositions prepared and morphology and properties of these blends was investigated. Moreover, the effect of adding different amounts of Graphene Nanoplatelets (GNP) on the morphology of the blends (by SEM), the interaction of nanopalates with polymer phases (by FTIR) and its effect on the mechanical properties and thermal stability of the samples were examined. The results of the study showed that in different amounts of graphene, these plates were preferentially located in the polymer phases dissimilarly and thus, caused the change of the blend morphology. In addition, measuring the mechanical properties by tensile test and results of thermal analysis by TGA indicated the improvement of thermal stability, modulus and mechanical strength and reduction of the elongation at break of graphene containing blends with increasing the loading of GNP. The changing behavior of the mechanical and thermal properties was proportional to the Graphene localization in blend phases.

Morphology, Mechanical and Thermal Properties of Poly(Lactic Acid)/Propylene-Ethylene Copolymer/Cellulose Composites

2019 ◽  
Vol 972 ◽  
pp. 172-177
Author(s):  
Sirirat Wacharawichanant ◽  
Patteera Opasakornwong ◽  
Ratchadakorn Poohoi ◽  
Manop Phankokkruad
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Thermal Properties ◽  
Tensile Stress ◽  
Cellulose Fibers ◽  
Phase Morphology ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Ethylene Copolymer ◽  
Thermal Stability Of

This work studied the effects of various types of cellulose fibers on the morphology, mechanical and thermal properties of poly(lactic acid) (PLA)/propylene-ethylene copolymer (PEC) (90/10 w/w) blends. The PLA/PEC blends before and after adding cellulose fibers were prepared by melt blending method in the internal mixer and molded by compression method. The morphological analysis observed that the presence of cellulose in PLA did not change the phase morphology of PLA, and PLA/cellulose composite surfaces were observed the cellulose fibers inserted in PLA matrix and fiber pull-out. The phase morphology of PLA/PEC blends was changed from brittle fracture to ductile fracture behavior and showed the phase separation between PLA and PEC phases. The presence of celluloses did not improve the compatibility between PLA and PEC phases. The tensile stress and strain curves found that the tensile stress of PLA was the highest value. The addition of all celluloses increased Young’s modulus of PLA. The PEC presence increased the tensile strain of PLA over two times when compared with neat PLA and PLA was toughened by PEC. The incorporation of cellulose fibers in PLA/PEC blends could improve Young’s modulus, tensile strength, and stress at break of the blends. The thermal stability showed that the degradation temperatures of all types of cellulose were less than the degradation temperatures of PLA. Thus, the incorporation of cellulose in PLA could not enhance the thermal stability of PLA composites and PLA/PEC composites. The degradation temperature of PEC was the highest value, but it could not improve the thermal stability of PLA. The incorporation of cellulose fibers had no effect on the melting temperature of the PLA blend and composites.

The Influence of Alkaline Treatment on Mechanical Properties and Morphology of Rice Husk Fibre Reinforced Polylactic Acid

2014 ◽  
Vol 911 ◽  
pp. 13-17 ◽  
Author(s):  
Abdullah Farah Dina ◽  
Sa’ad Siti Zaleha ◽  
Bonnia Noor Najmi ◽  
Ibrahim Nor Azowa
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Brittle Fracture ◽  
Polylactic Acid ◽  
Rice Husk ◽  
Alkaline Treatment ◽  
Distilled Water ◽  
Internal Mixer ◽  
Fesem Micrographs ◽  
Thermal Stability Of

This study focuses on the influence of surface treatment and fibre sizes on mechanical behavior, physical properties and morphology of rice husk fibre (RHF) reinforced polylactic-acid (PLA). Modified RHF was prepared by using 6w.t.% sodium hydroxide (NaOH) and distilled water. PLA composite reinforced with 25w.t.% volume fractions of modified RHF was mixed using the internal mixer and fabricated by the mini injection moulding. Tensile and flexural strength results showed that the PLA composite with 100, 200 and 500μm particles sizes of water treated fibre are much higher than those of alkaline treated. DSC measurement was performed and indicated that the Tg,Tmand ΔHmof PLA reduced after reinforcement with water treated and alkaline treated fibres. TGA results showed that the treatment reduced the thermal stability of the PLA. FESEM micrographs for flexural fractured surfaces of composites showed micro crack and pores due to brittle fracture of the PLA matrix adjacent to the fibre as a result of the brittle nature of the PLA resin.

Effects of Kenaf and Rice Husk on Thermal Properties of Kenaf/CaCO3/HDPE and Rice Husk/CaCO3/HDPE Hybrid Composites

2013 ◽  
Vol 748 ◽  
pp. 201-205
Author(s):  
Abd Aziz Noor Zuhaira ◽  
Rahmah Mohamed
Keyword(s):  
Thermal Stability ◽  
Thermal Properties ◽  
Rice Husk ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Degree Of Crystallinity ◽  
Differential Scanning Calorimetric ◽  
Kenaf Fiber ◽  
Twin Screw ◽  
Thermal Stability Of

In this research, rice husk and kenaf fiber were compounded with calcium carbonate (CaCO3)/high density polyethylene (HDPE) composite.Different loadings of up to 30 parts of 50 mesh sizes of rice husk particulate and kenaf fiber were compounded using twin-screw extruder with fixed 30 parts of CaCO3 fillerto produce hybrid composites of rice husk/CaCO3/HDPE and kenaf/CaCO3/HDPE.Compounded hybrid composites were prepared and tested for thermal properties. The thermal stability of the components was examined by thermogravimetricanalysis (TGA) and differential scanning calorimetric (DSC). The DSC results showed a slightly changes in melting temperature (Tm), crystallization temperature (Tc) and the degree of crystallinity (Xc) with addition of natural fiber. TGA indicates thermal stability of hybrid composite filled with kenaf or rice husk is better than unfilledCaCO3/HDPE composite.

Dispersion, mechanical and thermal properties of nano graphite platelets reinforced flouroelastomer composites

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Deng Xu ◽  
V. Sridhar ◽  
Thanh Tu Pham ◽  
Jin Kuk Kim
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Fracture Surface ◽  
Exfoliated Graphite ◽  
Mechanical And Thermal Properties ◽  
Reinforcing Fillers ◽  
Processing Of Composites

AbstractThe potential of exfoliated graphite nano platelets (xGnP™) as reinforcing fillers in flouroelastomer has been investigated. The dispersion of the nano graphite platelets in the polymer matrix has been investigated by WAXD, SEM, TEM, EPMA and AFM. WAXD studies indicated that the processing of composites did not change the inter-gallery distance (d-spacing) of the graphite platelets. The effect of increasing nano graphite loadings on mechanical properties like tensile strength, modulus and tear resistance has been studied. Formation of weld lines on the fracture surface of the composite has been observed by SEM. The thermal stability was determined using thermogravimetric analysis. The composites showed higher thermal stability in comparison with nonreinforced polymer.

Comparative analysis of the mechanical and thermal properties of polyester and epoxy natural fibre-reinforced hybrid composites

2020 ◽  
pp. 002199832097681
Author(s):  
DKK Cavalcanti ◽  
MD Banea ◽  
JSS Neto ◽  
RAA Lima
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Comparative Analysis ◽  
Hybrid Composites ◽  
Natural Fibre ◽  
Mechanical And Thermal Properties ◽  
Reinforced Composites ◽  
Thermoset Polymer ◽  
Thermal Stability Of ◽  
Fibre Reinforced Composites

In this work, a comparative analysis of the mechanical and thermal properties of polyester and epoxy single and hybrid natural fibre-reinforced composites was performed. Pure jute, jute + curauá and jute + sisal composites with two distinct thermoset polymer resins (an epoxy and a polyester) were produced. Tensile, flexural and impact tests were carried out, in accordance to ASTM standards, to investigate and compare the mechanical properties of the composites as a function of matrix and hybridization. In addition, a thermogravimetric analysis (TGA) was used to complete the comparative analysis of the thermal properties. Finally, a scanning electron microscopy (SEM) was used to examine the fracture surface of the tested specimens. It was found that the hybridization process improved the mechanical properties of the non-hybrid jute fibre based composites for both matrices used. The resin used as matrix plays an important role on the mechanical properties of the composites. The epoxy matrix based composites presented higher tensile strength, while the polyester based composites presented higher tensile and flexural stiffness as well as higher impact energy, when compared to the epoxy-based composite. TGA analysis showed that the thermal stability of epoxy-based composites was higher compared to the polyester-based composites.

Polybutadiene rubber/exfoliated graphite nanocomposites: Impact of filler on the thermal, mechanical and permeability characteristics

2019 ◽  
Vol 35 (3) ◽  
pp. 138-148
Author(s):  
Soney C George ◽  
Jiji Abraham ◽  
Thomasukutty Jose ◽  
Riya Thomas ◽  
Teresa Jacob ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Structural Characteristics ◽  
Nitrogen Atmosphere ◽  
Exfoliated Graphite ◽  
Melt Mixing ◽  
Permeability Characteristics ◽  
Polybutadiene Rubber ◽  
Permeation Studies

In this report, we demonstrate that both mechanical behaviour and thermal stability of polybutadiene rubber (PBR) nanocomposites could be improved by incorporating exfoliated graphite (EG) using melt mixing method. Incorporation of the filler EG in the polybutadiene (PBD) matrix is confirmed by infrared spectra and X-ray diffraction analysis. The structural characteristics, mechanical properties and thermal properties of these newly modified PBR nanocomposites were systematically analysed and studied. Thermal properties of the nanocomposites were studied using thermogravimetric analysis under nitrogen atmosphere. Thermogravimetric studies showed that PBR8 is having higher thermal stability than that of the PBR gum sample. Mechanical properties like tensile strength, Young’s modulus, tear strength, hardness and compression set of the nanocomposites were studied. Mechanical properties are also high for the modified PBR nanocomposites with maximum filler content. The permeability of organic vapours such as dichloromethane (CH2Cl2), chloroform (CHCl3) and carbon tetrachloride (CCl4) through PBR/EG nanocomposites was also studied. In vapour permeation studies, PBR4 exhibits the least permeability in CH2Cl2, CHCl3 and CCl4 solvents. Polybutadiene rubber–natural graphite (PBR/NG) nanocomposites were also prepared for comparison.

Effect of Compatibilizing Agent on Mechanical and Thermal Properties of Wood-Plastic Composites

2010 ◽  
Vol 150-151 ◽  
pp. 406-409
Author(s):  
Wen Lei ◽  
Xiao Yan Ding ◽  
Chi Xu
Keyword(s):  
Thermal Properties ◽  
Impact Strength ◽  
Raw Materials ◽  
Wood Flour ◽  
Mechanical And Thermal Properties ◽  
Molding Process ◽  
Plastic Composite ◽  
The Impact ◽  
Compatibilizing Agent ◽  
Thermal Stability Of

Polypropylene and wood flour were used as raw materials,maleic anhydride grafted polypropylene(MAPP) as compatibilizing agent, wood-plastic composite(WPC) was prepared by compression molding process. The effects of the content of MAPP on the mechanical and thermal properties of WPC were investigated. The results show that, with the increase of the content of MAPP, both the tensile and flexural strengths of WPC will increase, and the impact strength of WPC increases first, then decreases, and the impact strength reaches the maximum of 1.18kJ/m2 when the content of MAPP is 4%,which is 76.7% increased from that of the composite without MAPP. Each composite has an obvious heat-absorption peak when melted during 140-170 and the melting enthalpy of WPC increases with the content of MAPP, the melting procedures of all the composites are quite similar with one another. Application of MAPP can improve the thermal stability of WPC

Effects of graphene on thermal properties and thermal stability of polycarbonate/graphene nanocomposite

2021 ◽  
pp. 089270572199788
Author(s):  
Md Amir Sohel ◽  
Abhijit Mondal ◽  
P Mohammad Arif ◽  
Sabu Thomas ◽  
Asmita SenGupta
Keyword(s):  
Thermal Stability ◽  
Thermal Decomposition ◽  
Glass Transition ◽  
Thermal Properties ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Multilayer Graphene ◽  
Melt Mixing ◽  
Graphene Nanocomposite ◽  
Thermal Stability Of

Polycarbonate (PC) /graphene nanocomposite was prepared using multilayer graphene (MLG) with loadings of 0.5, 1, and 3 wt% via melt mixing process. Morphological, structural, and thermal properties of the PC/MLG nanocomposites are investigated to look into the influence of MLG on the nanocomposite. A significant increase (∼6.4°C) in glass transition temperature is observed upon the addition of 3 wt% of MLG into the polycarbonate matrix. This increase in glass transition temperature may be due to the interaction between the MLG and polycarbonate polymer matrix. The specific heat capacity of pure PC and PC/MLG nanocomposites varies linearly with temperature below their glass transition. Upon the addition of MLGs, the overall thermal stability of PC/MLG nanocomposites increases with MLG loadings. A maximum increase about 29.23°C in T onset of thermal decomposition is observed in PC/MLG nanocomposite having 3 wt% of MLG loading. The activation energy ( Ea) of thermal decomposition is also calculated by kinetic analysis of thermal decomposition of the PC/MLG nanocomposites using Horowitz–Metzger and Broido’s methods.

Sign in / Sign up

Export Citation Format

Share Document