scholarly journals Interactions and Dissociation Constants of Galactomannan Rendered Cellulose Films with Concavalin A by SPR Spectroscopy

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3040
Author(s):  
Pilar Vilaró ◽  
Carina Sampl ◽  
Gundula Teichert ◽  
Werner Schlemmer ◽  
Mathias Hobisch ◽  
...  

Interactions of biomolecules at interfaces are important for a variety of physiological processes. Among these, interactions of lectins with monosaccharides have been investigated extensively in the past, while polysaccharide-lectin interactions have scarcely been investigated. Here, we explore the adsorption of galactomannans (GM) extracted from Prosopis affinis on cellulose thin films determined by a combination of multi-parameter surface plasmon resonance spectroscopy (MP-SPR) and atomic force microscopy (AFM). The galactomannan adsorbs spontaneously on the cellulose surfaces forming monolayer type coverage (0.60 ± 0.20 mg·m−2). The interaction of a lectin, Concavalin A (ConA), with these GM rendered cellulose surfaces using MP-SPR has been investigated and the dissociation constant KD (2.1 ± 0.8 × 10−8 M) was determined in a range from 3.4 to 27.3 nM. The experiments revealed that the galactose side chains as well as the mannose reducing end of the GM are weakly interacting with the active sites of the lectins, whereas these interactions are potentially amplified by hydrophobic effects between the non-ionic GM and the lectins, thereby leading to an irreversible adsorption.

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2348 ◽  
Author(s):  
Katrin Niegelhell ◽  
Thomas Ganner ◽  
Harald Plank ◽  
Evelyn Jantscher-Krenn ◽  
Stefan Spirk

Lectins are a diverse class of carbohydrate binding proteins with pivotal roles in cell communication and signaling in many (patho)physiologic processes in the human body, making them promising targets in drug development, for instance, in cancer or infectious diseases. Other applications of lectins employ their ability to recognize specific glycan epitopes in biosensors and glycan microarrays. While a lot of research has focused on lectin interaction with specific carbohydrates, the interaction potential of lectins with different types of surfaces has not been addressed extensively. Here, we screen the interaction of two specific plant lectins, Concanavalin A and Ulex Europaeus Agglutinin-I with different nanoscopic thin films. As a control, the same experiments were performed with Bovine Serum Albumin, a widely used marker for non-specific protein adsorption. In order to test the preferred type of interaction during adsorption, hydrophobic, hydrophilic and charged polymer films were explored, such as polystyrene, cellulose, N,-N,-N-trimethylchitosan chloride and gold, and characterized in terms of wettability, surface free energy, zeta potential and morphology. Atomic force microscopy images of surfaces after protein adsorption correlated very well with the observed mass of adsorbed protein. Surface plasmon resonance spectroscopy studies revealed low adsorbed amounts and slow kinetics for all of the investigated proteins for hydrophilic surfaces, making those resistant to non-specific interactions. As a consequence, they may serve as favorable supports for biosensors, since the use of blocking agents is not necessary.


Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1497
Author(s):  
Nurul Illya Muhamad Fauzi ◽  
Yap Wing Fen ◽  
Nur Alia Sheh Omar ◽  
Silvan Saleviter ◽  
Wan Mohd Ebtisyam Mustaqim Mohd Daniyal ◽  
...  

In this study, synthesis and characterization of chitosan/maghemite (Cs/Fe2O3) composites thin film has been described. Its properties were characterized using Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and ultraviolet-visible spectroscopy (UV-Vis). FTIR confirmed the existence of Fe–O bond, C–N bond, C–C bond, C–O bond, O=C=O bond and O–H bond in Cs/Fe2O3 thin film. The surface morphology of the thin film indicated the relatively smooth and homogenous thin film, and also confirmed the interaction of Fe2O3 with the chitosan. Next, the UV-Vis result showed high absorbance value with an optical band gap of 4.013 eV. The incorporation of this Cs/Fe2O3 thin film with an optical-based method, i.e., surface plasmon resonance spectroscopy showed positive response where mercury ion (Hg2+) can be detected down to 0.01 ppm (49.9 nM). These results validate the potential of Cs/Fe2O3 thin film for optical sensing applications in Hg2+ detection.


2018 ◽  
Vol 9 ◽  
pp. 945-952 ◽  
Author(s):  
Christopher C Glover ◽  
Jason P Killgore ◽  
Ryan C Tung

This work presents data confirming the existence of a scan speed related phenomenon in contact-mode atomic force microscopy (AFM). Specifically, contact-resonance spectroscopy is used to interrogate this phenomenon. Above a critical scan speed, a monotonic decrease in the recorded contact-resonance frequency is observed with increasing scan speed. Proper characterization and understanding of this phenomenon is necessary to conduct accurate quantitative imaging using contact-resonance AFM, and other contact-mode AFM techniques, at higher scan speeds. A squeeze film hydrodynamic theory is proposed to explain this phenomenon, and model predictions are compared against the experimental data.


2008 ◽  
Vol 15 (04) ◽  
pp. 411-418 ◽  
Author(s):  
YONGZHONG JIN ◽  
DONGLIANG LIU ◽  
WEI WU ◽  
YALI SUN ◽  
ZUXIAO YU ◽  
...  

We have investigated the effects of substrate topography on the nucleation and growth behavior of 321 stainless steel (ss) films, introducing textured surfaces into mica substrates by the abrasion treatment. In this study, two groups of samples were prepared at three different sputtering time within 12 s using radio frequency (r.f.) magnetron sputtering and characterized by atomic force microscopy. Good nucleation uniformity has been obtained on the unabraded mica substrates due to the statistical distribution of nucleation sites. Especially, we have already observed an interesting unusual nucleation phenomenon, the island–rim structure on the abraded mica substrates after 4 s, where the island is fractal-like and the rim around the island was only occupied by few grains for nucleation. These ramified islands were located at the wide grooves introduced as predominate nucleation sites. The island–rim structure formed in initial nucleation process is closely associated with x, y velocity components of surface atoms and the distribution of active sites (related intimately to the surface free energy σ and strain energy ε) for nucleation. With the increasing of the sputtering time, voids and overlarge grains have been observed in the island–rim region after the sputtering time of 8 s and 12 s, respectively.


2014 ◽  
Vol 10 ◽  
pp. 1037-1046 ◽  
Author(s):  
Holger Bußkamp ◽  
Sascha Keller ◽  
Marta Robotta ◽  
Malte Drescher ◽  
Andreas Marx

The predictability of DNA self-assembly is exploited in many nanotechnological approaches. Inspired by naturally existing self-assembled DNA architectures, branched DNA has been developed that allows self-assembly to predesigned architectures with dimensions on the nanometer scale. DNA is an attractive material for generation of nanostructures due to a plethora of enzymes which modify DNA with high accuracy, providing a toolbox for many different manipulations to construct nanometer scaled objects. We present a straightforward synthesis of a rigid DNA branching building block successfully used for the generation of DNA networks by self-assembly and network formation by enzymatic DNA synthesis. The Y-shaped 3-armed DNA construct, bearing 3 primer strands is accepted by Taq DNA polymerase. The enzyme uses each arm as primer strand and incorporates the branched construct into large assemblies during PCR. The networks were investigated by agarose gel electrophoresis, atomic force microscopy, dynamic light scattering, and electron paramagnetic resonance spectroscopy. The findings indicate that rather rigid DNA networks were formed. This presents a new bottom-up approach for DNA material formation and might find applications like in the generation of functional hydrogels.


2020 ◽  
Vol 7 (3) ◽  
pp. 248-255
Author(s):  
Ludmila Matienko ◽  
Mil Elena Mickhailovna ◽  
Binyukov Vladimir Ivanovich ◽  
Goloshchapov Alexandr Nikolaevich

Background: In this study, we show that the AFM method not only allows monitoring the morphological changes in biological structures fixed on the surface due to H-bonds, but also makes it possible to study the self-organization of metal complexes by simulating the active center of enzymes due to intermolecular H-bonds into stable nanostructures; the sizes of which are much smaller than the studied biological objects. The possible role of intermolecular hydrogen bonds in the formation of stable supramolecular metal complexes, which are effective catalysts for the oxidation of alkyl arenes to hydroperoxides by molecular oxygen and mimic the selective active sites of enzymes, was first studied by AFM. Methods and Results: The formation of supramolecular structures due to intermolecular hydrogen bonds and, possibly, other non-covalent interactions, based on homogenous catalysts and models of active centers enzymes, heteroligand nickel and iron complexes, was proven by AFM-technique. AFM studies of supramolecular structures were carried out using NSG30 cantilever with a radius of curvature of 2 nm, in the tapping mode. To form nanostructures on the surface of a hydrophobic, chemically modified silicon surface as a substrate, the sample was prepared using a spin-coating process from solutions of the nickel and iron complexes. The composition and the structure of the complex Ni2(acac)(OAc)3·NMP·2H2O were determined in earlier works using various methods: mass spectrometry, UV- and IR-spectroscopy, elemental analysis, and polarography. Self-assembly of supramolecular structures is due to intermolecular interactions with a certain coordination of these interactions, which may be a consequence of the properties of the components themselves, the participation of hydrogen bonds and other non-covalent interactions, as well as the balance of the interaction of these components with the surface. Using AFM, approaches have been developed for fixing on the surface and quantifying parameters of cells. Conclusion: This study summarizes the authors' achievements in using the atomic force microscopy (AFM) method to study the role of intermolecular hydrogen bonds (and other non-covalent interactions) and supramolecular structures in the mechanisms of catalysis. The data obtained from AFM based on nickel and iron complexes, which are effective catalysts and models of active sites of enzymes, indicate a high probability of the formation of supramolecular structures in real conditions of catalytic oxidation, and can bring us closer to understanding enzymes activity. With a sensitive AFM method, it is possible to observe the self-organization of model systems into stable nanostructures due to H-bonds and possibly other non-covalent interactions, which can be considered as a step towards modeling the active sites of enzymes. Methodical approaches of atomic force microscopy for the study of morphological changes of cells have been developed.


1999 ◽  
Vol 5 (S2) ◽  
pp. 982-983
Author(s):  
Alan A. Galuska

The performance of many industrial polymers is determined by the microscopic morphology of the polymers. For example, surface morphology can influence properties such as adhesion, friction, sealing, blocking, printability, wettability, and haze. Furthermore, bulk morphology often controls mechanical properties such as toughness. strength, wear, and tear resistance. In order to optimize polymer performance, quick reliable methods of determining surface and bulk morphology are essential.In the past, electron microscopy (in particular TEM) has been the primary method for determining polymer morphology. However, the usefulness of electron microscopy has been limited by the destructive nature of the electron beam, the naturally poor contrast between polymer types, and the difficulty in preparing (staining, etching, cryogenic ultramicrotoming, etc.) high quality specimens.Recently, the tapping phase-shift mode of atomic force microscopy (TPSAFM) has provided the polymer scientist with a simple, quick, flexible and quantitative method for determining polymer surface and bulk morphology.


2018 ◽  
Vol 1 (1) ◽  
pp. 565-571
Author(s):  
Zouaoui Ahmed

In this paper, we report on an analysis carried out by using cyclic voltammetric (CV) and chronoamperometric (CA) techniques on the reaction and nucleation mechanisms of electrodeposited copper on indium-doped tin oxide (ITO)-coated glass substrates from sulfate solutions. The present investigation has been performed in an acid solution at pH 5. The Scharifker and Hills model were used to analyze current transients. At relatively low overpotentials, the copper deposition can be described by a model involving instantaneous nucleation on active sites and diffusion-controlled 3D growth. The values of diffusion coefficient D for Cu2+ ions are estimated. Atomic force microscopy (AFM) has been used to check on the samples’ surface morphology.


Sign in / Sign up

Export Citation Format

Share Document