scholarly journals Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2958
Author(s):  
JunJie Yu ◽  
Su A Park ◽  
Wan Doo Kim ◽  
Taeho Ha ◽  
Yuan-Zhu Xin ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cell Viability ◽  
Cell Density ◽  
Tissue Regeneration ◽  
Three Dimensional ◽  
Living Cells ◽  
3D Bioprinting ◽  
3D Objects ◽  
Advantages And Disadvantages ◽  
Resolution Cell

Three-dimensional (3D) bioprinting technology has emerged as a powerful biofabrication platform for tissue engineering because of its ability to engineer living cells and biomaterial-based 3D objects. Over the last few decades, droplet-based, extrusion-based, and laser-assisted bioprinters have been developed to fulfill certain requirements in terms of resolution, cell viability, cell density, etc. Simultaneously, various bio-inks based on natural–synthetic biomaterials have been developed and applied for successful tissue regeneration. To engineer more realistic artificial tissues/organs, mixtures of bio-inks with various recipes have also been developed. Taken together, this review describes the fundamental characteristics of the existing bioprinters and bio-inks that have been currently developed, followed by their advantages and disadvantages. Finally, various tissue engineering applications using 3D bioprinting are briefly introduced.

scholarly journals Three-dimensional printing of cell-laden bioink for blood vessel tissue engineering: Influence of process parameters and components on cell viability

2021 ◽  
Author(s):  
CONGCONG ZHAN ◽  
Yasong Hu ◽  
ANDUO ZHOU ◽  
SHANFENG ZHANG ◽  
Xia Huang
Keyword(s):  
Tissue Engineering ◽  
Blood Vessel ◽  
Cell Viability ◽  
Process Parameters ◽  
Umbilical Vein ◽  
Three Dimensional ◽  
Small Diameter ◽  
3D Bioprinting ◽  
Influence Of Process Parameters ◽  
Composite Gels

Three-dimensional (3D) bioprinting is a potential therapeutic method for tissue engineering owing to its ability to prepare cell-laden tissue constructs. The properties of bioink are crucial to accurately control the printing structure. Meanwhile, the effect of process parameters on the precise structure is not nonsignificant. We investigated the correlation between process parameters of 3D bioprinting and the structural response of κ-carrageenan-based hydrogels to explore the controllable structure, printing resolution, and cell survival rate. Small-diameter (<6 mm) gel filaments with different structures were printed by varying the shear stress of the extrusion bioprinter to simulate the natural blood vessel structure. The cell viability of the scaffold was evaluated. The in vitro culture of human umbilical vein endothelium cells (HUVECs) on the κ-carrageenan (kc) and composite gels (carrageenan/carbon nanotube and carrageenan/sodium alginate) demonstrated that the cell attachment and proliferation on composite gels were better than those on pure kc. Our results revealed that the carrageenan-based composite bioinks offer better printability, sufficient mechanical stiffness, interconnectivity, and biocompatibility. This process can facilitate precise adjustment of the pore size, porosity, and pore distribution of the hydrogel structure by optimising the printing parameters as well as realise the precise preparation of the internal structure of the 3D hydrogel-based tissue engineering scaffold. Moreover, we obtained perfused tubular filament by 3D printing at optimal process parameters.

scholarly journals Editorial for the Special Issue on 3D Printing for Tissue Engineering and Regenerative Medicine

Micromachines ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 366 ◽  
Author(s):  
Vahid Serpooshan ◽  
Murat Guvendiren
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Regenerative Medicine ◽  
Three Dimensional ◽  
Living Cells ◽  
3D Bioprinting ◽  
Special Issue ◽  
3D Structures ◽  
Manufacturing Techniques

Three-dimensional (3D) bioprinting uses additive manufacturing techniques to fabricate 3D structures consisting of heterogenous selections of living cells, biomaterials, and active biomolecules [...]

Hydrogel-Based Bioinks for Three-Dimensional Bioprinting: Patent Analysis

2021 ◽  
Vol 7 (1) ◽  
pp. 3
Author(s):  
Ahmed Fatimi
Keyword(s):  
Tissue Engineering ◽  
Detailed Analysis ◽  
State Of The Art ◽  
Three Dimensional ◽  
Patent Analysis ◽  
The State ◽  
Driving Factors ◽  
3D Bioprinting ◽  
Preparation Methods

There are a variety of hydrogel-based bioinks commonly used in three-dimensional bioprinting. In this study, in the form of patent analysis, the state of the art has been reviewed by introducing what has been patented in relation to hydrogel-based bioinks. Furthermore, a detailed analysis of the patentability of the used hydrogels, their preparation methods and their formulations, as well as the 3D bioprinting process using hydrogels, have been provided by determining publication years, jurisdictions, inventors, applicants, owners, and classifications. The classification of patents reveals that most inventions intended for hydrogels used as materials for prostheses or for coating prostheses are characterized by their function or properties Knowledge clusters and expert driving factors show that biomaterials, tissue engineering, and biofabrication research is concentrated in the most patents.

scholarly journals Additive Manufacturing of Biopolymers for Tissue Engineering and Regenerative Medicine: An Overview, Potential Applications, Advancements, and Trends

2021 ◽  
Vol 2021 ◽  
pp. 1-20 ◽  
Author(s):  
Dhinakaran Veeman ◽  
M. Swapna Sai ◽  
P. Sureshkumar ◽  
T. Jagadeesha ◽  
L. Natrayan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Regenerative Medicine ◽  
Tissue Regeneration ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Wide Range ◽  
Potential Applications ◽  
Pharmaceutical Industries

As a technique of producing fabric engineering scaffolds, three-dimensional (3D) printing has tremendous possibilities. 3D printing applications are restricted to a wide range of biomaterials in the field of regenerative medicine and tissue engineering. Due to their biocompatibility, bioactiveness, and biodegradability, biopolymers such as collagen, alginate, silk fibroin, chitosan, alginate, cellulose, and starch are used in a variety of fields, including the food, biomedical, regeneration, agriculture, packaging, and pharmaceutical industries. The benefits of producing 3D-printed scaffolds are many, including the capacity to produce complicated geometries, porosity, and multicell coculture and to take growth factors into account. In particular, the additional production of biopolymers offers new options to produce 3D structures and materials with specialised patterns and properties. In the realm of tissue engineering and regenerative medicine (TERM), important progress has been accomplished; now, several state-of-the-art techniques are used to produce porous scaffolds for organ or tissue regeneration to be suited for tissue technology. Natural biopolymeric materials are often better suited for designing and manufacturing healing equipment than temporary implants and tissue regeneration materials owing to its appropriate properties and biocompatibility. The review focuses on the additive manufacturing of biopolymers with significant changes, advancements, trends, and developments in regenerative medicine and tissue engineering with potential applications.

scholarly journals Fabrication of 3D Printing Scaffold with Porcine Skin Decellularized Bio-Ink for Soft Tissue Engineering

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3522
Author(s):  
Su Jeong Lee ◽  
Jun Hee Lee ◽  
Jisun Park ◽  
Wan Doo Kim ◽  
Su A Park
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
3D Printing ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Research Groups ◽  
Porcine Skin ◽  
Alginate Hydrogel ◽  
Chemical Treatments ◽  
Soft Tissue Engineering

Recently, many research groups have investigated three-dimensional (3D) bioprinting techniques for tissue engineering and regenerative medicine. The bio-ink used in 3D bioprinting is typically a combination of synthetic and natural materials. In this study, we prepared bio-ink containing porcine skin powder (PSP) to determine rheological properties, biocompatibility, and extracellular matrix (ECM) formation in cells in PSP-ink after 3D printing. PSP was extracted without cells by mechanical, enzymatic, and chemical treatments of porcine dermis tissue. Our developed PSP-containing bio-ink showed enhanced printability and biocompatibility. To identify whether the bio-ink was printable, the viscosity of bio-ink and alginate hydrogel was analyzed with different concentration of PSP. As the PSP concentration increased, viscosity also increased. To assess the biocompatibility of the PSP-containing bio-ink, cells mixed with bio-ink printed structures were measured using a live/dead assay and WST-1 assay. Nearly no dead cells were observed in the structure containing 10 mg/mL PSP-ink, indicating that the amounts of PSP-ink used were nontoxic. In conclusion, the proposed skin dermis decellularized bio-ink is a candidate for 3D bioprinting.

Design and additive manufacturing of porous titanium scaffolds for optimum cell viability in bone tissue engineering

2020 ◽  
pp. 095440542093756
Author(s):  
Bingbing Li ◽  
Bani Davod Hesar ◽  
Yiwen Zhao ◽  
Li Ding
Keyword(s):  
Tissue Engineering ◽  
Cell Viability ◽  
Bone Tissue Engineering ◽  
Pore Size ◽  
Bone Tissue ◽  
Structural Strength ◽  
Three Dimensional ◽  
Porous Titanium ◽  
Nih3t3 Cells ◽  
Pore Sizes

Pore size, external shape, and internal complexity of additively manufactured porous titanium scaffolds are three primary determinants of cell viability and structural strength of scaffolds in bone tissue engineering. To obtain an optimal design with the combination of all three determinants, four scaffolds each with a unique topology (external geometry and internal structure) were designed and varied the pore sizes of each scaffold 3 times. For each topology, scaffolds with pore sizes of 300, 400, and 500 µm were designed. All designed scaffolds were additively manufactured in material Ti6Al4V by the direct metal laser melting machine. Compression test was conducted on the scaffolds to assure meeting minimum compressive strength of human bone. The effects of pore size and topology on the cell viability of the scaffolds were analyzed. The 12 scaffolds were ultrasonically cleaned and seeded with NIH3T3 cells. Each scaffold was seeded with 1 million cells. After 32 days of culturing, the cells were fixed for their three-dimensional architecture preservation and to obtain scanning electron microscope images.

scholarly journals Effects of Encapsulated Cells on the Physical–Mechanical Properties and Microstructure of Gelatin Methacrylate Hydrogels

2019 ◽  
Vol 20 (20) ◽  
pp. 5061 ◽  
Author(s):  
Srikumar Krishnamoorthy ◽  
Behnam Noorani ◽  
Changxue Xu
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Cell Viability ◽  
Physical Properties ◽  
Pore Size ◽  
Cell Density ◽  
Tensile Modulus ◽  
Encapsulated Cells ◽  
3T3 Fibroblasts ◽  
Cell Densities

Gelatin methacrylate (GelMA) has been gaining popularity in recent years as a photo-crosslinkable biomaterial widely used in a variety of bioprinting and tissue engineering applications. Several studies have established the effects of process-based and material-based parameters on the physical–mechanical properties and microstructure of GelMA hydrogels. However, the effect of encapsulated cells on the physical–mechanical properties and microstructure of GelMA hydrogels has not been fully understood. In this study, 3T3 fibroblasts were encapsulated at different cell densities within the GelMA hydrogels and incubated over 96 h. The effects of encapsulated cells were investigated in terms of mechanical properties (tensile modulus and strength), physical properties (swelling and degradation), and microstructure (pore size). Cell viability was also evaluated to confirm that most cells were alive during the incubation. It was found that with an increase in cell density, the mechanical properties decreased, while the degradation and the pore size increased.

scholarly journals A Customizable, Low-Cost Perfusion System for Sustaining Tissue Constructs

2018 ◽  
Vol 23 (6) ◽  
pp. 592-598
Author(s):  
Brian J. O’Grady ◽  
Jason X. Wang ◽  
Shannon L. Faley ◽  
Daniel A. Balikov ◽  
Ethan S. Lippmann ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cell Viability ◽  
Large Scale ◽  
Low Cost ◽  
Three Dimensional ◽  
Tissue Scaffolds ◽  
Perfusion System ◽  
Pump System ◽  
Tissue Constructs ◽  
Engineered Tissue

The fabrication of engineered vascularized tissues and organs requiring sustained, controlled perfusion has been facilitated by the development of several pump systems. Currently, researchers in the field of tissue engineering require the use of pump systems that are in general large, expensive, and generically designed. Overall, these pumps often fail to meet the unique demands of perfusing clinically useful tissue constructs. Here, we describe a pumping platform that overcomes these limitations and enables scalable perfusion of large, three-dimensional hydrogels. We demonstrate the ability to perfuse multiple separate channels inside hydrogel slabs using a preprogrammed schedule that dictates pumping speed and time. The use of this pump system to perfuse channels in large-scale engineered tissue scaffolds sustained cell viability over several weeks.

Spatiotemporal Intracellular Deformation of Cells During Freezing-Induced Cell-Fluid-Matrix Interactions

2013 ◽  
Author(s):  
Soham Ghosh ◽  
J. Craig Dutton ◽  
Bumsoo Han
Keyword(s):  
Tissue Engineering ◽  
Cell Viability ◽  
Three Dimensional ◽  
Tissue Type ◽  
Major Constituent ◽  
Tissue Banks ◽  
Chemical Additives ◽  
Cryoprotective Agents ◽  
Cell Tissue ◽  
The Status

Freezing of biomaterials is emerging as one of the key biotechnologies in cell/tissue engineering, medicine and biology. Its applications include — 1) preservation of cell/tissue engineering products, 2) quality control of biospecimens cryopreserved in tissue banks and repositories, and 3) synthesis procedures of biomaterials such as decellularization of native tissues to create acellular (i.e., cell-free) complex three-dimensional extracellular matrices (ECMs). Traditionally, research efforts have focused on determining optimal freeze/thaw (F/T) protocols with chemical additives, so called cryoprotective agents, for a given cell/tissue-type by comparing the outcomes of F/T protocols, which are mainly gauged by cell viability. Although cell viability is the major constituent, it has recently been recognized that other features beyond viability are also critical to the functionality of biomaterials, including the microstructure of the ECM, the status of cell-matrix adhesion, and the cytoskeletal structure and organization [1, 2, 3].

scholarly journals Alginate/Gelatin Hydrogels Reinforced with TiO2 and β-TCP Fabricated by Microextrusion-based Printing for Tissue Regeneration

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 457 ◽  
Author(s):  
Rodrigo Urruela-Barrios ◽  
Erick Ramírez-Cedillo ◽  
A. Díaz de León ◽  
Alejandro Alvarez ◽  
Wendy Ortega-Lara
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Tissue Regeneration ◽  
Average Pore Size ◽  
Three Dimensional ◽  
Engineering Applications ◽  
Average Pore ◽  
Viscous Deformation ◽  
Freeze Dried ◽  
3D Printed

Three-dimensional (3D) printing technologies have become an attractive manufacturing process to fabricate scaffolds in tissue engineering. Recent research has focused on the fabrication of alginate complex shaped structures that closely mimic biological organs or tissues. Alginates can be effectively manufactured into porous three-dimensional networks for tissue engineering applications. However, the structure, mechanical properties, and shape fidelity of 3D-printed alginate hydrogels used for preparing tissue-engineered scaffolds is difficult to control. In this work, the use of alginate/gelatin hydrogels reinforced with TiO2 and β-tricalcium phosphate was studied to tailor the mechanical properties of 3D-printed hydrogels. The hydrogels reinforced with TiO2 and β-TCP showed enhanced mechanical properties up to 20 MPa of elastic modulus. Furthermore, the pores of the crosslinked printed structures were measured with an average pore size of 200 μm. Additionally, it was found that as more layers of the design were printed, there was an increase of the line width of the bottom layers due to its viscous deformation. Shrinkage of the design when the hydrogel is crosslinked and freeze dried was also measured and found to be up to 27% from the printed design. Overall, the proposed approach enabled fabrication of 3D-printed alginate scaffolds with adequate physical properties for tissue engineering applications.

Sign in / Sign up

Export Citation Format

Share Document