scholarly journals Hollow Mesoporous Microspheres Coating for Super-Hydrophobicity Wood with High Thermostability and Abrasion Performance

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2856
Author(s):  
Rui Yang ◽  
Shida Zuo ◽  
Beibei Song ◽  
Haiyan Mao ◽  
Zhenhua Huang ◽  
...  
Keyword(s):  
Wood Surface ◽  
Hydrophobic Surface ◽  
Scratch Test ◽  
Wood Products ◽  
Original Structure ◽  
Energy Materials ◽  
Water Contact ◽  
Low Surface Energy ◽  
Mesoporous Microspheres ◽  
The Fourier Transform

Super-hydrophobic phenomena generally exist in nature, and wood can also obtain hydrophobicity by specific processing on the surface, being like the construction of microscale rough surface or decoration with low surface energy materials. In this research, the formation of hydrophobic layers on wood surface was investigated without breaking the wood’s original structure. The core-shell structure particles were prepared by penetrating orthosilicate and polystyrene into the hollow mesoporous microsphere structure with tetrahydrofuran. A wood sample was coated with polydimethylsiloxane (PDMS) resin layer to enhance the adhesion of nano and micron hollow mesoporous microsphere on its surface. According to the surface structure of super-hydrophobic subjects in nature, the nano and micron hollow mesoporous microsphere were sprayed with different ratios several times to form a hydrophobic surface. The water contact angle could reach 150°, revealing that the hydrophobic behavior of the nano and micron hollow mesoporous microsphere coating was achieved. The microstructures of wood samples were examined by the scanning electron microscopy, and the chemical functional groups were investigated by the Fourier transform infrared; both verified that the hydrophobic surface was successfully coated. The thermogravimetric examination revealed the improved thermal stability of the hydrophobic wood. The scratch test was used to measure the abrasion resistance of the nano and micron hollow mesoporous microsphere coatings on wood surface. It was suggested that the nano and micron hollow mesoporous microsphere coating was an effective method to fabricate extremely hydrophobic wood products.

Fabrication and Characterization of a Superhydrophobic Low-Density Polyethylene Film

2012 ◽  
Vol 557-559 ◽  
pp. 1834-1837
Author(s):  
Jun Liang Wu ◽  
Hui Ping Zhang ◽  
Xu Nan Wang
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Energy Materials ◽  
Water Contact ◽  
Simple Method ◽  
Ldpe Film ◽  
Low Surface Energy ◽  
Special Surface ◽  
Superhydrophobic Property

A superhydrophobic LDPE film was obtained by a simple method in atmosphere without addition of low-surface-energy materials. The water contact angle of the superhydrophobic LDPE film are 155±1.9º. SEM shows that compared with common smooth LDPE film, a porous structure was obviously observed on the superhydrophobic LDPE film. Such a special surface microstructure may result in the superhydrophobic property. The effect of drying temperature and concentration on water contact angle were studied.

Micro-nanostructure-based super-hydrophobic surface on cotton fabric

2017 ◽  
Vol 88 (22) ◽  
pp. 2602-2610 ◽  
Author(s):  
Jing Gao ◽  
Jun Liu ◽  
Ruifang Xu ◽  
Huiwen Guo ◽  
Lu Wang ◽  
...  
Keyword(s):  
Sol Gel ◽  
Hydrophobic Surface ◽  
Water Repellency ◽  
Structural Features ◽  
Cotton Fabrics ◽  
Silica Sol ◽  
Water Contact ◽  
Stöber Method ◽  
Low Surface Energy ◽  
Modified Stöber Method

Inspired by the super water repellency owing to the hierarchal micro- and nano-structural features observed in nature, we constructed similar hierarchal surfaces in both micro and nano sizes on cotton fabrics via a two-step sol-gel method. Silica sol-gel particles were prepared by the modified Stöber method of hydrolysis and condensation of tetraethylorthosilicate as a precursor. Through adjusting the volume of NH3·H2O, particles of various sizes were obtained. Using the dip-pad-dry-cure method, the cotton fabrics were finished with the silica sol gels of micro- and nano-sizes, and followed by low surface energy modification of hexadecyltrimethoxysilane. The results showed that the thus structured surface made the cotton fabrics much more hydrophobic with a water contact angle near 162O, close to that of the lotus leaf.

scholarly journals Novel Low-Temperature Chemical Vapor Deposition of Hydrothermal Delignified Wood for Hydrophobic Property

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1757 ◽  
Author(s):  
Rui Yang ◽  
Yunyi Liang ◽  
Shu Hong ◽  
Shida Zuo ◽  
Yingji Wu ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Low Temperature ◽  
Vapor Deposition ◽  
Low Cost ◽  
Chemical Vapor ◽  
Hydrophobic Surface ◽  
Weather Conditions ◽  
Scratch Test ◽  
Hydrophobic Property ◽  
Water Contact

As a hydrophilic material, wood is difficult to utilize for external applications due to the variable weather conditions. In this study, an efficient, facile, and low-cost method was developed to enhance the hydrophobicity of wood. By applying the low-temperature chemical vapor deposition (CVD) technology, the polydimethylsiloxane-coated wood (PDMS@wood) with hydrophobic surface was fabricated employing dichlorodimethylsilane as the CVD chemical resource. The result of water contact angle (i.e., 157.3°) revealed the hydrophobic behavior of the PDMS@wood. The microstructures of the wood samples were observed by scanning electron microscopy and energy dispersive X-ray spectroscopy (EDS) analysis verified PDMS successfully coated on wood surfaces. The chemical functional groups of the PDMS@wood were investigated by Fourier transform infrared (FT-IR) and Raman spectra. The thermogravimetric results indicated the enhanced thermal stability of the wood after PDMS coating. In addition, the stability test of PDMS@wood indicated that the hydrophobicity properties of the PDMS@wood samples were preserved after long-time storage (e.g., 30 days). The scratch test was carried out to examine the abrasion resistance of the hydrophobic coatings on PDMS@wood surface. It was suggested that low-temperature CVD process could be a successful approach for fabricating hydrophobic wood.

Osteoconductivity of Superhydrophilic Ti- and Zr-Alloy for Biomedical Application

2016 ◽  
Vol 879 ◽  
pp. 2524-2527
Author(s):  
Masazumi Okido ◽  
Kensuke Kuroda
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Strong Influence ◽  
Biomedical Application ◽  
Hydrophobic Surface ◽  
Hydrophilic Surface ◽  
Water Contact ◽  
Zr Alloy ◽  
Zr Alloys

Surface hydrophilicity is considered to have a strong influence on the biological reactions of bone-substituting materials. However, the influence of a hydrophilic or hydrophobic surface on the osteoconductivity is not completely clear. In this study, we produced super-hydrophilic and hydrophobic surface on Ti-and Zr-alloys. Hydrothermal treatment at 180 oC for 180 min. in the distilled water and immersion in x5 PBS(-) brought the super-hydrophilic surface (water contact angle < 10 (deg.)) and heat treatment of as-hydrothermaled the hydrophobic surface. The osteoconductivity of the surface treated samples with several water contact angle was evaluated by in vivo testing. The surface properties, especially water contact angle, strongly affected the osteoconductivity and protein adsorbability, and not the surface substance.

Biodegradable Microfluidic Device: Hydrolysis, Decomposition and Surface Modification

2010 ◽  
Vol 447-448 ◽  
pp. 755-759 ◽  
Author(s):  
Jia En Low ◽  
Wei Xiang Koh ◽  
Joon Kit Lai ◽  
Yan Jie Lee ◽  
Xu Li ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Microfluidic Device ◽  
Ph Value ◽  
Blood Compatibility ◽  
Blood Clot ◽  
Hydrophobic Surface ◽  
Poly Lactic Acid ◽  
Water Contact ◽  
Chemical Grafting ◽  
Poly Ethylene

Poly(lactic acid) (PLA) is a biodegradable and biocompatible aliphatic polyester whose lactic acid monomers are derived from renewable resources such as corn and sugar beet. As a thermal plastic it can be processed through compounding and injection. As such, we have developed a microfludic device using PLA aimed at blood dialysis application. To quantify the degradation of PLA, its hydrolysis at different pH value was studied. To study the bioresorbable property of these fabricated devices, its decomposition was tested by morphology observation and weight change measurements after embedding in soil under simulated environmental conditions. Upon contact with a hydrophobic surface, platelets and prothrombin are always activated to attach to the surface, resulting in blood clot. This would block the blood flow through the dialysis channels in the microfluidic device. To improve the hydrophilicity, hence the blood compatibility, chemical grafting of a hydrophilic polymer, poly(ethylene oxide) methacrylate (PEGmA), onto the surface of PLA microfluidic device was carried out and the changes in hydrophilicity was monitored through measuring the water contact angle. Our results indicate that chemical grafting of PEGmA significantly improves the hydrophilicity of the device surface.

scholarly journals A Novel Synthetic UV-Curable Fluorinated Siloxane Resin for Low Surface Energy Coating

Polymers ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 979 ◽  
Author(s):  
Chunfang Zhu ◽  
Haitao Yang ◽  
Hongbo Liang ◽  
Zhengyue Wang ◽  
Jun Dong ◽  
...  
Keyword(s):  
Surface Energy ◽  
Photoelectron Spectroscopy ◽  
Contact Angles ◽  
Proton Nuclear Magnetic Resonance ◽  
Energy Materials ◽  
Uv Curable ◽  
X Ray ◽  
Low Surface Energy ◽  
Low Concentrations ◽  
Siloxane Polymers

Low surface energy materials have attracted much attention due to their properties and various applications. In this work, we synthesized and characterized a series of ultraviolet (UV)-curable fluorinated siloxane polymers with various fluorinated acrylates—hexafluorobutyl acrylate, dodecafluoroheptyl acrylate, and trifluorooctyl methacrylate—grafted onto a hydrogen-containing poly(dimethylsiloxane) backbone. The structures of the fluorinated siloxane polymers were measured and confirmed by proton nuclear magnetic resonance and Fourier transform infrared spectroscopy. Then the polymers were used as surface modifiers of UV-curable commercial polyurethane (DR-U356) at different concentrations (1, 2, 3, 4, 5, and 10 wt %). Among three formulations of these fluorinated siloxane polymers modified with DR-U356, hydrophobic states (91°, 92°, and 98°) were obtained at low concentrations (1 wt %). The DR-U356 resin is only in the hydrophilic state at 59.41°. The fluorine and siloxane element contents were investigated by X-ray photoelectron spectroscopy and the results indicated that the fluorinated and siloxane elements were liable to migrate to the surface of resins. The results of the friction recovering assays showed that the recorded contact angles of the series of fluorinated siloxane resins were higher than the original values after the friction-annealing progressing.

The Study of Chitosan Solution Coating on Water Barrier Property of Seedling Paper Bag Made from Water Hyacinth

2021 ◽  
Vol 1047 ◽  
pp. 97-102
Author(s):  
Nattanicha Khamsao ◽  
Kornkamon Waengwan ◽  
Sunisorn Konchai ◽  
Poonnapat Patthong ◽  
Bpantamars Phadungchob ◽  
...  
Keyword(s):  
Water Hyacinth ◽  
Aquatic Plant ◽  
Water Resistance ◽  
Low Cost ◽  
Hydrophobic Surface ◽  
Chitosan Solution ◽  
Barrier Properties ◽  
Water Contact ◽  
Water Barrier ◽  
Spraying Method

Seedling bags are low cost and light weight containers used by farmers to germinate and sprout seeds into seedlings before transplanting into the ground. However, cutting and removing seedling bags before the transplantation can damage the plant roots and cause losses in their productivity. In addition, plastics used in conventional seedling bags contribute to more plastic waste during this process. This study offers a solution to these problems with alternative biodegradable materials; i.e. modified papers made from an invasive alien aquatic plant species—water hyacinth—and enhanced with Chitosan solution coating. Papers were made from water hyacinth and dipped or sprayed with Chitosan solution in acetic acid at concentrations of 1% wt., 1.5% wt., and 2% wt. The dipping method showed better water barrier properties than the spraying method in every concentration, with 2% wt. concentration having the best barrier properties. The 2% wt. concentration of Chitosan coating by dipping method changed the water contact angle of the water hyacinth paper from a hydrophilic to a hydrophobic surface. This enhancement in water resistance was confirmed by water absorption time, which reached over 1.5 hours—3 times longer than the spraying method.

scholarly journals One-Step Preparation of Durable Super-Hydrophobic MSR/SiO2 Coatings by Suspension Air Spraying

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 677 ◽  
Author(s):  
Zhengyong Huang ◽  
Wenjie Xu ◽  
Yu Wang ◽  
Haohuan Wang ◽  
Ruiqi Zhang ◽  
...  
Keyword(s):  
Contact Angle ◽  
Adhesion Strength ◽  
Contact Angle Hysteresis ◽  
Surface Hardness ◽  
Hierarchical Structures ◽  
Hydrophobic Surface ◽  
Water Contact ◽  
Hydrophobic Coating ◽  
Mechanical Durability ◽  
One Step

In this study, we develop a facial one-step approach to prepare durable super-hydrophobic coatings on glass surfaces. The hydrophobic characteristics, corrosive liquid resistance, and mechanical durability of the super-hydrophobic surface are presented. The as-prepared super-hydrophobic surface exhibits a water contact angle (WCA) of 157.2° and contact angle hysteresis of 2.3°. Mico/nano hierarchical structures and elements of silicon and fluorine is observed on super-hydrophobic surfaces. The adhesion strength and hardness of the surface are determined to be 1st level and 4H, respectively. The coating is, thus, capable of maintaining super-hydrophobic state after sand grinding with a load of 200 g and wear distances of 700 mm. The rough surface retained after severe mechanical abrasion observed by atomic force microscope (AFM) microscopically proves the durable origin of the super-hydrophobic coating. Results demonstrate the feasibility of production of the durable super-hydrophobic coating via enhancing its adhesion strength and surface hardness.

Nanoindentation and Scratch test on Thin Film Energy Materials

2017 ◽  
Vol 2 (1) ◽  
Author(s):  
Arnab S. Bhattacharyya ◽  
Ramgiri P. Kumar ◽  
Gaurav Acharya ◽  
Vivek Ranjan
Keyword(s):  
Thin Film ◽  
Scratch Test ◽  
Energy Materials

scholarly journals Superhydrophobic engineering materials provide a rapid and simple route for highly efficient self-driven crude oil spill cleanup

RSC Advances ◽  
2018 ◽  
Vol 8 (67) ◽  
pp. 38363-38369 ◽  
Author(s):  
Hongbo Xu ◽  
Shulong Bao ◽  
Liuting Gong ◽  
Renping Ma ◽  
Lei Pan ◽  
...  
Keyword(s):  
Surface Energy ◽  
Crude Oil ◽  
Rough Surface ◽  
Oil Spill ◽  
Material Surface ◽  
Energy Materials ◽  
Simple Route ◽  
Low Surface Energy ◽  
Oil Spill Cleanup ◽  
Crude Oil Spill

Traditional superhydrophobic material use depends on two processes: creating a rough structure on a material surface and modifying the rough surface with low surface energy materials.

Sign in / Sign up

Export Citation Format

Share Document