scholarly journals Synthesis of Tosyl- and Nosyl-Ended Polyisobutylenes with High Extent of Functionalities: The Effect of Reaction Conditions

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2504
Author(s):  
Balázs Pásztói ◽  
Tobias M. Trötschler ◽  
Ákos Szabó ◽  
Györgyi Szarka ◽  
Benjamin Kerscher ◽  
...  
Keyword(s):  
Product Distribution ◽  
Chloride Ions ◽  
Thermally Stable ◽  
Reaction Conditions ◽  
Carbocationic Polymerization ◽  
High Extent ◽  
Tosyl Chloride

Endfunctional polymers possess significant industrial and scientific importance. Sulfonyl endgroups, such as tosyl and nosyl endfunctionalities, due their ease of substitution are highly desired for a variety of polymer structures. The sulfonylation of hydroxyl-terminated polyisobutylene (PIB-OH), a chemically and thermally stable, biocompatible, fully saturated polymer, with tosyl chloride (TsCl) and nosyl chloride (NsCl) is presented in this study. PIB-OHs derived from commercial exo-olefin-ended PIB (PIBexo-OH) and allyl-terminated polymer made via quasiliving carbocationic polymerization of isobutylene (PIBall-OH) were tosylated and nosylated in the presence of 4-dimethylaminopyridine (DMAP), pyridine and 1-methylimidazole (1-MI) catalysts and triethylamine (TEA). Our systematic investigations revealed that the end product distribution strongly depends on the relative amount of the components, especially that of TEA. While PIBexo-OTs with quantitative endfunctionality is readily formed from PIBexo-OH, its nosylation is not as straightforward. During sulfonylation of PIBall-OH, the formed tosyl and nosyl endgroups are easily substituted with chloride ions, formed in the first step of sulfonylation, leading to chloride termini. We found that decreased amounts of TEA afford the synthesis of PIBall-OTs and PIBall-ONs with higher than 90% endfunctionalities. These sulfonyl-ended PIBs open new ways for utilizing PIB in various fields and in the synthesis of novel PIB-containing macromolecular architectures.

Novel Products in the CO2-Laser Induced Reaction of Trichloroethylene

1995 ◽  
Vol 60 (1) ◽  
pp. 104-114 ◽  
Author(s):  
Boyd L. Earl ◽  
Richard L. Titus
Keyword(s):  
Irradiation Time ◽  
Product Distribution ◽  
Incident Power ◽  
Cell Geometry ◽  
Reaction Conditions ◽  
Peak Areas ◽  
Induced Decomposition ◽  
Nmr Methods ◽  
Induced Reaction ◽  
Novel Products

Previous reports on the thermal or CO2-laser induced decomposition of trichloroethylene have identified only one condensible product, hexachlorobenzene (in addition to HCl and mono- and dichloroacetylene). We have found that trichloroethylene vapor exposed to cw irradiation on the P(24) line of the (001 - 100) band of the CO2 laser at incident power levels from 8 - 17 W produces numerous products, of which the 13 major ones have been identified using IR, GC/MS, GC/FTIR, and NMR methods. All of these products have 4, 6, or 8 carbons, are highly unsaturated, and are completely chlorinated or contain a single hydrogen. C4HCl5 and C6Cl6 isomers (three of each) account for S 55% to 85% of total products (based on peak areas in the total ion chromatograms in GC/MS runs), depending on reaction conditions. In addition to characterizing the products, we discuss the dependence of the product distribution on laser power, irradiation time, and cell geometry, and we outline a possible mechanism.

A review of lignin hydrogen peroxide oxidation chemistry with emphasis on aromatic aldehydes and acids

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajinkya More ◽  
Thomas Elder ◽  
Zhihua Jiang
Keyword(s):  
Hydrogen Peroxide ◽  
Oxidative Degradation ◽  
Reaction Medium ◽  
Dicarboxylic Acids ◽  
Aromatic Aldehydes ◽  
Product Distribution ◽  
Reaction Conditions ◽  
Alkaline Conditions ◽  
The Stability ◽  
Oxidation Chemistry

Abstract This review discusses the main factors that govern the oxidation processes of lignins into aromatic aldehydes and acids using hydrogen peroxide. Aromatic aldehydes and acids are produced in the oxidative degradation of lignin whereas mono and dicarboxylic acids are the main products. The stability of hydrogen peroxide under the reaction conditions is an important factor that needs to be addressed for selectively improving the yield of aromatic aldehydes. Hydrogen peroxide in the presence of heavy metal ions readily decomposes, leading to minor degradation of lignin. This degradation results in quinones which are highly reactive towards peroxide. Under these reaction conditions, the pH of the reaction medium defines the reaction mechanism and the product distribution. Under acidic conditions, hydrogen peroxide reacts electrophilically with electron rich aromatic and olefinic structures at comparatively higher temperatures. In contrast, under alkaline conditions it reacts nucleophilically with electron deficient carbonyl and conjugated carbonyl structures in lignin. The reaction pattern in the oxidation of lignin usually involves cleavage of the aromatic ring, the aliphatic side chain or other linkages which will be discussed in this review.

Halogenation of Butyl Rubber—A Model Compound Approach

1984 ◽  
Vol 57 (2) ◽  
pp. 275-283 ◽  
Author(s):  
R. Vukov
Keyword(s):  
Model Compound ◽  
Product Distribution ◽  
Butyl Rubber ◽  
Methyl Groups ◽  
Reaction Site ◽  
Model Compounds ◽  
Reaction Conditions ◽  
Basic Study ◽  
Rubber Model ◽  
Trisubstituted Alkenes

Abstract The study of the halogenation behavior of butyl rubber model compounds has brought about a better understanding of the behavior of these systems. It has been established that the presence of methyl groups, in a position B to the reaction site in the butyl rubber model compound, profoundly influences the course of halogenation. Due to the steric hindrance imposed by these groups, both the products of chlorination and bromination deviate from patterns typical of other trisubstituted alkenes. In the case of chlorination, this deviation is demonstrated by the absence of addition products of chlorine across the double bond. In the case of bromination reactions, the change in product distribution is even more dramatic. Thus, substitution products normally not observed in bromination reactions of other trisubstituted alkenes become predominant products found in yields of between 70–90% depending on the precise reaction conditions. The behavior of the butyl model compound appears to be entirely consistent with the behavior of butyl rubber itself; the model compound approach is therefore a valuable tool for use in the basic study of this type of system.

scholarly journals Efficient removal of Hg2+, Cd2+ and Pb2+ from aqueous solution and mixed industrial wastewater using a designed chelating ligand, 2-pyridyl-N-(2′-methylthiophenyl) methyleneimine (PMTPM)

2019 ◽  
Vol 79 (6) ◽  
pp. 1092-1101 ◽  
Author(s):  
Krishnendu Kumar Pobi ◽  
Biplab Mondal ◽  
Sumanta Nayek ◽  
Apurba K. Patra ◽  
Rajnarayan Saha
Keyword(s):  
Aqueous Solution ◽  
Industrial Wastewater ◽  
Chelating Agent ◽  
Chloride Ions ◽  
Coordination Geometry ◽  
Reaction Conditions ◽  
X Ray ◽  
Stability Order ◽  
Optimum Reaction

Abstract The present study is focused on the removal of Hg2+, Cd2+ and Pb2+ ions from aqueous solution using a tridentate chelating agent, 2-pyridyl-N-(2′-methylthiophenyl) methyleneimine (PMTPM); and applicability of such removal from industrial wastewater using PMTPM is also investigated. The results showed that the metal ions removal efficiency using PMTPM was in the order of Hg2+(99.46%) > Cd2+(95.42%) > Pb2+(94.54%) under optimum reaction conditions (L:M2+ = 3:1, pH = 9, time = 24 h, temp. = 30 °C). Formed chelated complexes such as [Hg(PMTPM)Cl2] (1), [Cd(PMTPM)Cl2] (2) and [Pb(PMTPM)Cl2] (3) were characterized by numerous spectroscopic tools and X-ray structure determination of a representative complex of Hg2+. In the X-ray structure of [Hg(PMTPM)Cl2], 1, the Hg2+ adopted a distorted tetrahedral coordination geometry surrounding two N donors of PMTPM and two chloride ions. A similar coordination geometry surrounding the respective metal centres in 2 and 3 was established. The thermogravimetric analysis (TGA) revealed a stability order of [Cd(PMTPM)Cl2] > [Hg(PMTPM)Cl2] > [Pb(PMTPM)Cl2]. Further the comparative metal leaching behaviour of these chelate complexes exhibited higher stability in alkaline solution than in acidic. Moreover, PMTPM was applied in real mixed industrial wastewater with alkaline pH, and adequate removals of toxic metals were achieved.

Nanostructured Co3O4 Oxide for Low Temperature Ethanol Oxidation

2014 ◽  
Vol 798-799 ◽  
pp. 205-210
Author(s):  
Jairo Alberto Gomez-Cuaspud ◽  
Martin Schmal
Keyword(s):  
Ethanol Oxidation ◽  
Physicochemical Characterization ◽  
Fluorescence Analysis ◽  
Product Distribution ◽  
X Ray Diffraction ◽  
Ethanol Oxidation Reaction ◽  
Reaction Conditions ◽  
X Ray ◽  
Temperature Programmed ◽  
Combustion Technique

We investigated the synthesis of nanosized Co3O4 oxide by the polymerization-combustion technique, with different concentrations (3, 12 and 25% w/w) in the ethanol oxidation reaction. Characterization was done by X-ray fluorescence analysis, X-ray diffraction, temperature programmed reduction, scanning and transmission electronic microscopy and CO and H2 chemisorption. Principal results from physicochemical characterization show that the concentration of the metal oxide influence the product distribution and selectivity under isothermal conditions at 420 °C showed the formation of intermediate etoxi-species and preferential dehydrogenation reaction on stream of material. Specific concentrations result in high conversions and H2 selectivity under present reaction conditions.

scholarly journals Deoxydehydration of vicinal diols by homogeneous catalysts: a mechanistic overview

2019 ◽  
Vol 6 (11) ◽  
pp. 191165 ◽  
Author(s):  
Kayla A. DeNike ◽  
Stefan M. Kilyanek
Keyword(s):  
Reaction Mechanism ◽  
Product Distribution ◽  
Catalytic Cycle ◽  
Reaction Conditions ◽  
Homogeneous Catalysts ◽  
Commodity Chemicals ◽  
Reduction Methods ◽  
Vicinal Diols ◽  
Catalyst Systems

Deoxydehydration (DODH) is an important reaction for the upconversion of biomass-derived polyols to commodity chemicals such as alkenes and dienes. DODH can be performed by a variety of early metal-oxo catalysts incorporating Re, Mo and V. The varying reduction methods used in the DODH catalytic cycle impact the product distribution, reaction mechanism and the overall yield of the reaction. This review surveys the reduction methods commonly used in homogeneous DODH catalyst systems and their impacts on yield and reaction conditions.

The Research of Silane Oligomer with Lower Valatilization Rate for Protecting Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 1318-1322 ◽  
Author(s):  
Hong Yao Sun ◽  
Zheng Yang ◽  
Gao Xia Sun ◽  
Xue Feng Xu
Keyword(s):  
Molecular Weight ◽  
Gel Permeation Chromatography ◽  
Chloride Ions ◽  
Polymerization Reaction ◽  
Low Molecular Weight ◽  
Construction Process ◽  
Reaction Conditions ◽  
Hydrophobic Agent ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

As one of the measures to improve the durability of concrete, silane penetrating hydrophobic agents can preserve the properties of respiratory function of concrete and can prevent the penetration from harmful medium such as chloride ions. Because of low molecular weight of the silane penetrating hydrophobic agent such as isobutyl triethoxysilane, high volatilization rate of silane can result in waste of material in construction process. The silane oligomer was obtained by radical polymerization reaction with suitable monomers, initiators and reaction conditions. Furthermore, we verified the structure of the silane oligomer by FT-IR spectroscopy and got its molecular weight by GPC(Gel Permeation Chromatography). The silane oligomer with lower volatilization rate has excellent properties of hydrophobicity, higher penetration depth and resistance to chloride ions penetration.

The Reaction of Thiols and α,ω-Dithiols With Triphenylphosphine and Diisopropyl Azodicarboxylate

1990 ◽  
Vol 43 (1) ◽  
pp. 161 ◽  
Author(s):  
D Camp ◽  
ID Jenkins
Keyword(s):  
Chain Length ◽  
Disulfide Bond ◽  
Alkyl Chain ◽  
Bond Formation ◽  
Product Distribution ◽  
Alkyl Chain Length ◽  
Disulfide Bond Formation ◽  
Reaction Conditions ◽  
Mitsunobu Reactions

α,ω-Dithiols in the presence of triphenylphosphine and diisopropyl azodicarboxylate are converted into a mixture of monomeric and polymeric disulfides. The product distribution is dependent on the alkyl chain length and the reaction conditions. In contrast to normal Mitsunobu reactions, disulfide bond formation is achieved with regeneration of triphenylphosphine. The mechanism of this reaction is discussed.

scholarly journals Integrated and Metal Free Synthesis of Dimethyl Carbonate and Glycidol from Glycerol Derived 1,3-Dichloro-2-propanol via CO2 Capture

2021 ◽  
Vol 3 (4) ◽  
pp. 685-698
Author(s):  
Santosh Khokarale ◽  
Ganesh Shelke ◽  
Jyri-Pekka Mikkola
Keyword(s):  
Co2 Capture ◽  
Dimethyl Carbonate ◽  
Chemical Species ◽  
Cyclic Carbonate ◽  
Chloride Ions ◽  
Synthetic Approach ◽  
Integrated Process ◽  
Reaction Conditions ◽  
Metal Free ◽  
Analysis Technique

Dimethyl carbonate (DMC) and glycidol are considered industrially important chemical entities and there is a great benefit if these moieties can be synthesized from biomass-derived feedstocks such as glycerol or its derivatives. In this report, both DMC and glycidol were synthesized in an integrated process from glycerol derived 1,3-dichloro-2-propanol and CO2 through a metal-free reaction approach and at mild reaction conditions. Initially, the chlorinated cyclic carbonate, i.e., 3-chloro-1,2-propylenecarbonate was synthesized using the equivalent interaction of organic superbase 1,8-diazabicyclo [5.4.0] undec-7-ene (DBU) and 1,3-dichloro-2-propanol with CO2 at room temperature. Further, DMC and glycidol were synthesized by the base-catalyzed transesterification of 3-chloro-1,2-propylenecarbonate using DBU in methanol. The synthesis of 3-chloro-1,2-propylenecarbonate was performed in different solvents such as dimethyl sulfoxide (DMSO) and 2-methyltetrahydrofuran (2-Me-THF). In this case, 2-Me-THF further facilitated an easy separation of the product where a 97% recovery of the 3-chloro-1,2-propylenecarbonate was obtained compared to 63% with DMSO. The use of DBU as the base in the transformation of 3-chloro-1,2-propylenecarbonate further facilitates the conversion of the 3-chloro-1,2 propandiol that forms in situ during the transesterification process. Hence, in this synthetic approach, DBU not only eased the CO2 capture and served as a base catalyst in the transesterification process, but it also performed as a reservoir for chloride ions, which further facilitates the synthesis of 3-chloro-1,2-propylenecarbonate and glycidol in the overall process. The separation of the reaction components proceeded through the solvent extraction technique where a 93 and 89% recovery of the DMC and glycidol, respectively, were obtained. The DBU superbase was recovered from its chlorinated salt, [DBUH][Cl], via a neutralization technique. The progress of the reactions as well as the purity of the recovered chemical species was confirmed by means of the NMR analysis technique. Hence, a single base, as well as a renewable solvent comprising an integrated process approach was carried out under mild reaction conditions where CO2 sequestration along with industrially important chemicals such as dimethyl carbonate and glycidol were synthesized.

scholarly journals Effect of catalyst and reaction conditions on aromatic monomer yields, product distribution, and sugar yields during lignin hydrogenolysis of silver birch wood

2020 ◽  
Vol 316 ◽  
pp. 123907
Author(s):  
Thanaphong Phongpreecha ◽  
Kendall F. Christy ◽  
Sandip K. Singh ◽  
Pengchao Hao ◽  
David B. Hodge
Keyword(s):  
Product Distribution ◽  
Silver Birch ◽  
Birch Wood ◽  
Reaction Conditions ◽  
Aromatic Monomer
Sign in / Sign up

Export Citation Format

Share Document