scholarly journals One-Step Hot Microembossing for Fabrication of Paper-Based Microfluidic Chips in 10 Seconds

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2493
Author(s):  
Yi-Je Juang ◽  
Yu Wang ◽  
Shu-Kai Hsu
Keyword(s):  
Linear Relationship ◽  
Processing Time ◽  
Low Cost ◽  
Processing Parameters ◽  
Glucose Detection ◽  
Microfluidic Chips ◽  
Environmental Detection ◽  
Chemically Modified ◽  
Wax Printing ◽  
One Step

In recent years, microfluidic paper-based analytical devices (µPADs) have been developed because they are simple, inexpensive and power-free for low-cost chemical, biological and environmental detection. Moreover, paper is lightweight; easy to stack, store and transport; biodegradable; biocompatible; good for colorimetric tests; flammable for easy disposal of used paper-based diagnostic devices by incineration; and can be chemically modified. Different methods have been demonstrated to fabricate µPADs such as solid wax printing, craft cutting, photolithography, etc. In this study, one-step hot microembossing was proposed and demonstrated to fabricate µPADs. The processing parameters like embossing temperature, pressure and time were systematically investigated. It was found that, at 55 °C embossing temperature, the embossing pressure ranging from 10 to 14 MPa could be applied and the embossing time was only 5 s. This led to the overall processing time for fabrication of µPADs within 10 s. Glucose detection was conducted using the µPADs as fabricated, and a linear relationship was obtained between 5 and 50 mM.

A one-step strategy for ultra-fast and low-cost mass production of plastic membrane microfluidic chips

Lab on a Chip ◽  
2016 ◽  
Vol 16 (20) ◽  
pp. 3909-3918 ◽  
Author(s):  
Chong Hu ◽  
Sheng Lin ◽  
Wanbo Li ◽  
Han Sun ◽  
Yangfan Chen ◽  
...  
Keyword(s):  
Mass Production ◽  
Low Cost ◽  
Microfluidic Chips ◽  
One Step ◽  
Plastic Membrane

A PE membrane and an EVA-coated PET membrane are piled up. When pressed by a heated non-stick stamp, the two membranes bond together, and the PE membrane spontaneously rises at the area not pressed, forming flexible microchannels within 12 seconds.

Dual Nickel/Palladium-Catalyzed Reductive Cross-Coupling Reactions Between Two Phenol Derivatives

2020 ◽  
Author(s):  
Baojian Xiong ◽  
Yue Li ◽  
Yin Wei ◽  
Søren Kramer ◽  
Zhong Lian
Keyword(s):  
Functional Group ◽  
Low Cost ◽  
Cross Coupling ◽  
Coupling Reactions ◽  
Phenol Derivatives ◽  
Cross Coupling Reactions ◽  
Palladium Catalyzed ◽  
One Step ◽  
Aryl Tosylates ◽  
Low Sensitivity

Cross-coupling between substrates that can be easily derived from phenols is highly attractive due to the abundance and low cost of phenols. Here, we report a dual nickel/palladium-catalyzed reductive cross-coupling between aryl tosylates and aryl triflates; both substrates can be accessed in just one step from readily available phenols. The reaction has a broad functional group tolerance and substrate scope (>60 examples). Furthermore, it displays low sensitivity to steric effects demonstrated by the synthesis of a 2,2’disubstituted biaryl and a fully substituted aryl product. The widespread presence of phenols in natural products and pharmaceuticals allow for straightforward late-stage functionalization, illustrated with examples such as Ezetimibe and tyrosine. NMR spectroscopy and DFT calculations indicate that the nickel catalyst is responsible for activating the aryl triflate, while the palladium catalyst preferentially reacts with the aryl tosylate.

Surface Modification of Poly(Vinylchloride) for Manufacturing Advanced Catheters

2020 ◽  
Vol 27 (10) ◽  
pp. 1616-1633 ◽  
Author(s):  
Oana Cristina Duta ◽  
Aurel Mihail Ţîţu ◽  
Alexandru Marin ◽  
Anton Ficai ◽  
Denisa Ficai ◽  
...  
Keyword(s):  
Surface Modification ◽  
Chemical Modification ◽  
Medical Devices ◽  
Low Cost ◽  
Physical And Mechanical Properties ◽  
Polymeric Materials ◽  
Modern Medicine ◽  
Structural Failure ◽  
Chemical Grafting ◽  
One Step

Polymeric materials, due to their excellent physicochemical properties and versatility found applicability in multiples areas, including biomaterials used in tissue regeneration, prosthetics (hip, artificial valves), medical devices, controlled drug delivery systems, etc. Medical devices and their applications are very important in modern medicine and the need to develop new materials with improved properties or to improve the existent materials is increasing every day. Numerous reasearches are activated in this domain in order to obtain materials/surfaces that does not have drawbacks such as structural failure, calcifications, infections or thrombosis. One of the most used material is poly(vinylchloride) (PVC) due to its unique properties, availability and low cost. The most common method used for obtaining tubular devices that meet the requirements of medical use is the surface modification of polymers without changing their physical and mechanical properties, in bulk. PVC is a hydrophobic polymer and therefore many research studies were conducted in order to increase the hydrophilicity of the surface by chemical modification in order to improve biocompatibility, to enhance wettability, reduce friction or to make lubricious or antimicrobial coatings. Surface modification of PVC can be achieved by several strategies, in only one step or, in some cases, in two or more steps by applying several techniques consecutively to obtain the desired modification / performances. The most common processes used for modifying the surface of PVC devices are: plasma treatment, corona discharge, chemical grafting, electric discharge, vapour deposition of metals, flame treatment, direct chemical modification (oxidation, hydrolysis, etc.) or even some physical modification of the roughness of the surface.

scholarly journals Monolithic integration of nanorod arrays on microfluidic chips for fast and sensitive one-step immunoassays

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Ye Wang ◽  
Jiongdong Zhao ◽  
Yu Zhu ◽  
Shurong Dong ◽  
Yang Liu ◽  
...  
Keyword(s):  
Troponin I ◽  
Specific Antigen ◽  
Monolithic Integration ◽  
Detection Sensitivity ◽  
Quantitative Detection ◽  
Plasmonic Nanostructures ◽  
Nanorod Arrays ◽  
Microfluidic Chips ◽  
One Step ◽  
Flow Through

AbstractHere, we present integrated nanorod arrays on microfluidic chips for fast and sensitive flow-through immunoassays of physiologically relevant macromolecules. Dense arrays of Au nanorods are easily fabricated through one-step oblique angle deposition, which eliminates the requirement of advanced lithography methods. We report the utility of this plasmonic structure to improve the detection limit of the cardiac troponin I (cTnI) assay by over 6 × 105-fold, reaching down to 33.9 fg mL−1 (~1.4 fM), compared with an identical assay on glass substrates. Through monolithic integration with microfluidic elements, the device enables a flow-through assay for quantitative detection of cTnI in the serum with a detection sensitivity of 6.9 pg mL−1 (~0.3 pM) in <6 min, which was 4000 times lower than conventional glass devices. This ultrasensitive detection arises from the large surface area for antibody conjugation and metal-enhanced fluorescent signals through plasmonic nanostructures. Moreover, due to the parallel arrangement of flow paths, simultaneous detection of multiple cancer biomarkers, including prostate-specific antigen and carcinoembryonic antigen, has been fulfilled with increased signal-to-background ratios. Given the high performance of this assay, together with its simple fabrication process that is compatible with standard mass manufacturing techniques, we expect that the prepared integrated nanorod device can bring on-site point-of-care diagnosis closer to reality.

scholarly journals Microfabrication with Very Low-Average Power of Green Light to Produce PDMS Microchips

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 607
Author(s):  
Lucero M. Hernandez-Cedillo ◽  
Francisco G. Vázquez-Cuevas ◽  
Rafael Quintero-Torres ◽  
Jose L. Aragón ◽  
Miguel Angel Ocampo Mortera ◽  
...  
Keyword(s):  
Low Cost ◽  
Average Power ◽  
Green Light ◽  
Microfluidic Devices ◽  
Processing Parameters ◽  
Coating Film ◽  
Two Dimensional ◽  
Dimethyl Siloxane ◽  
Visible Laser ◽  
High Absorption

In this article, we show an alternative low-cost fabrication method to obtain poly(dimethyl siloxane) (PDMS) microfluidic devices. The proposed method allows the inscription of micron resolution channels on polystyrene (PS) surfaces, used as a mold for the wanted microchip’s production, by applying a high absorption coating film on the PS surface to ablate it with a focused low-power visible laser. The method allows for obtaining micro-resolution channels at powers between 2 and 10 mW and can realize any two-dimensional polymeric devices. The effect of the main processing parameters on the channel’s geometry is presented.

scholarly journals Novel BiOBr by compositing low-cost biochar for efficient ciprofloxacin removal: the synergy of adsorption and photocatalysis on the degradation kinetics and mechanism insight

RSC Advances ◽  
2021 ◽  
Vol 11 (25) ◽  
pp. 15369-15379
Author(s):  
Wandi Song ◽  
Jianghua Zhao ◽  
Xiuhong Xie ◽  
Wang Liu ◽  
Shuxia Liu ◽  
...  
Keyword(s):  
Synergistic Effect ◽  
Solvothermal Method ◽  
Degradation Kinetics ◽  
Low Cost ◽  
Kinetics And Mechanism ◽  
One Step ◽  
Ciprofloxacin Removal

1. The C-loaded BiOBr was synthesized via a one-step solvothermal method. 2. C/BiOBr showed an obvious synergistic effect of adsorption and photocatalysis on the degradation of ciprofloxacin.

scholarly journals Removal of Cadmium(II) from Water using Modified Citrus limettioides Peels: Thermodynamic and Isotherm Studies

2019 ◽  
Vol 32 (1) ◽  
pp. 73-78
Author(s):  
P. Janaki ◽  
R. Sudha ◽  
T.S. Sribharathi ◽  
P. Anitha ◽  
K. Poornima ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Raw Material ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Method ◽  
Chemically Modified ◽  
Adsorption Performance ◽  
Monolayer Adsorption ◽  
Isotherm Equations

The adsorption performance of sulphuric acid treated low cost adsorbent synthesized by using Citrus limettioides peel as an effective raw material for the removal of cadmium(II) from water. The batch adsorption method was carried out to optimize some parameters like contact time, pH and adsorbent dose. The nonlinear isotherm equations were used to calculate the different isotherm constant of five isotherm models namely Freundlich, Langmuir, Dubinin-Radushkevich, Redlich-Peterson and Sips. The Langmuir monolayer adsorption capacity of chemically modified Citrus limettioides peel was found to be 287.60 mg g-1. The negative values of ΔGº and ΔHº showed that the adsorption process is spontaneous and exothermic.

Sign in / Sign up

Export Citation Format

Share Document