scholarly journals Multi Self-Healable UV Shielding Polyurethane/CeO2 Protective Coating: The Effect of Low-Molecular-Weight Polyols

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1947
Author(s):  
Mohammad Mizanur Rahman ◽  
Rami Suleiman ◽  
Md. Hasan Zahir ◽  
Aasif Helal ◽  
A. Madhan Kumar ◽  
...  
Keyword(s):  
Molecular Weight ◽  
In Situ Polymerization ◽  
Outdoor Exposure ◽  
Low Molecular Weight ◽  
Self Healing ◽  
Polydimethyl Siloxane ◽  
Molecular Weights ◽  
Uv Shielding ◽  
Ceo2 Coating

We prepared a series of polyurethane (PU) coatings with defined contents using poly(tetramethylene oxide)glycol (PTMG) with two different molecular weights (i.e., Mn = 2000 and 650), as well as polydimethyl siloxane (PDMS) with a molecular weight of Mn 550. For every coating, maximum adhesive strength and excellent self-healing character (three times) were found using 6.775 mol% mixed with low-molecular-weight-based polyols (PU-11-3-3). Defined 1.0 wt% CeO2 was also used for the PU-11-3-3 coating (i.e., PU-11-3-3-CeO2) to obtain UV shielding properties. Both the in situ polymerization and blending processes were separately applied during the preparation of the PU-11-3-3-CeO2 coating dispersion. The in situ polymerization-based coating (i.e., PU-11-3-3-CeO2-P) showed similar self-healing properties. The PU-11-3-3-CeO2-P coating also showed excellent UV shielding in real outdoor exposure conditions.

Preparation and Flame Resistance of Hydrotalcite/Epoxy Nanocomposites Containing Red Phosphorous

2011 ◽  
Vol 194-196 ◽  
pp. 1460-1463 ◽  
Author(s):  
Ya Tao Zhang ◽  
Yan Wu Zhang ◽  
Hao Qin Zhang ◽  
Jin Dun Liu
Keyword(s):  
Molecular Weight ◽  
Electron Microscope ◽  
In Situ Polymerization ◽  
Polyamide 6 ◽  
Low Molecular Weight ◽  
Curing Agent ◽  
Micro Structure ◽  
Flame Resistance ◽  
Burning Method

In this study, the intercalated hydrotalcite (HT)/epoxy (EP) nanocomposites containing red phosphorous (RP) (HT-RP/EP) were prepared by in-situ polymerization. Firstly, low-molecular-weight polyamide 6 (PA6)/HT nanocomposite was prepared in the presence of organ-hydrotalcite with alanine as an initiator at 150°C. And then, PA6/HT composite and a certain amount of RP incorporated into epoxy resin in the presence of curing agent (polyamide 650) and HT-RP/EP nanocomposite was prepared successfully. Finally, the micro-structure and flame resistance were characterized by scan electron microscope (SEM) and vertical burning method, respectively. The results showed that HT was dispersed in the epoxy matrix evenly. HT-RP/EP nanocomposites showed significant flame resistance. When the content of both of HT and RP was 5%, the flame resistance achieved FV-0 level.

scholarly journals Preparation of Porous Polymers by ”in Situ Precipitation” Using Low Molecular Weight Gelators

2002 ◽  
Vol 34 (6) ◽  
pp. 474-477 ◽  
Author(s):  
Masahiro Suzuki ◽  
Yasuhiko Sakakibara ◽  
Satoshi Kobayashi ◽  
Mutsumi Kimura ◽  
Hirofusa Shirai ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Porous Polymers ◽  
Low Molecular Weight ◽  
Low Molecular Weight Gelators

Preparation and Properties of the Polystyrene/Alumina Nanocomposites

2012 ◽  
Vol 557-559 ◽  
pp. 519-522
Author(s):  
Xu Man Wang ◽  
Cai Ning Zhang
Keyword(s):  
Molecular Weight ◽  
Thermal Resistance ◽  
Coupling Agent ◽  
Silane Coupling Agent ◽  
In Situ Polymerization ◽  
Average Molecular Weight ◽  
Experimental Results ◽  
Solvent Resistance ◽  
Silane Coupling

Silane coupling agent KH-570 was applied to modify the surface capability of the alumina (Al2O3). The modified Al2O3were dispersed in styrene. The in-situ polymerization was used to prepare the polystyrene/alumina (PS/Al2O3) composites, in which azodiisobutyronitrile (AIBN) was used as initiator. FTIR, DSC and TG were applied to characterize the prepared composites. The solvent resistance, thermal resistance of the composites and the average molecular weight of PS in PS/Al2O3nanocomposites were studied. The experimental results demonstrated that the solvent resistance of PS/Al2O3nanocomposites was improved by the adding of Al2O3nanoparticles. The thermal resistance of the composites increased with the increasing of the Al2O3content. Meanwhile, the molecular weight of PS in the composites increased with the increasing of the Al2O3content.

scholarly journals Microencapsulation of Liquid Cyanoacrylate via In Situ Polymerization for Self-healing Bone Cement Application – ERRATUM

2012 ◽  
Vol 1417 ◽  
pp. 1-13
Author(s):  
Vineela D. Gandham ◽  
Alice B.W. Brochu ◽  
William M. Reichert
Keyword(s):  
Bone Cement ◽  
In Situ Polymerization ◽  
Self Healing ◽  
Healing Bone

A study on the kinetics and thermal properties of polystyrene/diatomite nanocomposites prepared via in situ ATRP

2018 ◽  
Vol 33 (2) ◽  
pp. 180-197 ◽  
Author(s):  
Khezrollah Khezri ◽  
Yousef Fazli
Keyword(s):  
Molecular Weight ◽  
In Situ Polymerization ◽  
Structural Characteristics ◽  
Nitrogen Adsorption ◽  
Linear Increase ◽  
Size Exclusion ◽  
Scanning Calorimetry ◽  
Morphological Studies ◽  
Exclusion Chromatography

Pristine mesoporous diatomite was employed to prepare polystyrene/diatomite composites. Diatomite platelets were used for in situ polymerization of styrene by atom transfer radical polymerization to synthesize tailor-made polystyrene nanocomposites. X-Ray fluorescence spectrometer analysis and thermogravimetric analysis (TGA) were employed for evaluating some inherent properties of pristine diatomite platelets. Nitrogen adsorption/desorption isotherm is applied to examine surface area and structural characteristics of the diatomite platelets. Evaluation of pore size distribution and morphological studies were also performed by scanning and transmission electron microscopy. Conversion and molecular weight determinations were carried out using gas and size exclusion chromatography, respectively. Linear increase of ln ( M0/M) with time for all the samples shows that polymerization proceeds in a living manner. Addition of 3 wt% pristine mesoporous diatomite leads to an increase of conversion from 72% to 89%. Molecular weight of polystyrene chains increases from 11,326 g mol−1 to 14134 g mol−1 with the addition of 3 wt% pristine mesoporous diatomite; however, polydispersity index values increases from 1.13 to 1.38. Increasing thermal stability of the nanocomposites is demonstrated by TGA. Differential scanning calorimetry shows an increase in glass transition temperature from 81.9°C to 87.1°C by adding 3 wt% of mesoporous diatomite platelets.

scholarly journals Anticoagulant Properties of a Green Algal Rhamnan-type Sulfated Polysaccharide and Its Low-molecular-weight Fragments Prepared by Mild Acid Degradation

Marine Drugs ◽  
2018 ◽  
Vol 16 (11) ◽  
pp. 445 ◽  
Author(s):  
Xue Liu ◽  
Peng Du ◽  
Xiao Liu ◽  
Sujian Cao ◽  
Ling Qin ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Anticoagulant Activity ◽  
Sulfated Polysaccharide ◽  
Low Molecular Weight ◽  
Thrombin Time ◽  
Acid Degradation ◽  
Molecular Weights ◽  
Green Algal

The active sulfated polysaccharide from seaweed possesses important pharmaceutical and biomedical potential. In the study, Monostroma sulfated polysaccharide (MSP) was obtained from Monostroma angicava, and the low-molecular-weight fragments of MSP (MSP-Fs: MSP-F1–MSP-F6) were prepared by controlled acid degradation. The molecular weights of MSP and MSP-F1–MSP-F6 were 335 kDa, 240 kDa, 90 kDa, 40 kDa, 24 kDa, 12 kDa, and 6.8 kDa, respectively. The polysaccharides were sulfated rhamnans that consisted of →3)-α-l-Rhap-(1→ and →2)-α-l-Rhap-(1→ units with partial sulfation at C-2 of →3)-α-l-Rhap-(1→ and C-3 of →2)-α-l-Rhap-(1→. Anticoagulant properties in vitro of MSP and MSP-F1–MSP-F6 were evaluated by studying the activated partial thromboplastin time, thrombin time, and prothrombin time. Anticoagulant activities in vivo of MSP and MSP-F4 were further evaluated; their fibrin(ogen)olytic activities in vivo and thrombolytic properties in vitro were also assessed by D-dimer, fibrin degradation products, plasminogen activator inhibitior-1, and clot lytic rate assays. The results showed that MSP and MSP-F1–MSP-F4 with molecular weights of 24–240 kDa had strong anticoagulant activities. A decrease in the molecular weight of MSP-Fs was accompanied by a decrease in the anticoagulant activity, and higher anticoagulant activity requires a molecular weight of over 12 kDa. MSP and MSP-F4 possessed strong anticoagulant activities in vivo, as well as high fibrin(ogen)olytic and thrombolytic activities. MSP and MSP-F4 have potential as drug or helpful food supplements for human health.

scholarly journals Investigation of Silicon Nanoparticle-Polystyrene Hybrids

2019 ◽  
Vol 2 (2) ◽  
pp. 49-50
Author(s):  
Madihah Khan ◽  
Alyxandra Thiessen ◽  
I Teng Cheong ◽  
Sarah Milliken ◽  
Jonathan G. C. Veinot
Keyword(s):  
Silicon Nanoparticles ◽  
In Situ Polymerization ◽  
Toxic Substance ◽  
Homogeneous Mixture ◽  
Silicon Nanoparticle ◽  
Molecular Weights ◽  
Abundant Element ◽  
The Stability ◽  
Led Lights

Current LED lights are created with quantum dots made of metals like selenium, tellurium, and cadmium which can be toxic. Silicon is used as a non-toxic substance and is the second most abundant element in the earth's crust. When silicon is prepared at a nanometer size, unique luminesce optical properties emerge that can be tuned using sized surface chemistry. Therefore, silicon nanoparticles can be used as an alternative emitter for LED lights. To produce hydride-terminated silicon nanoparticles we must synthesize the particles. Hydrogen silsesquioxane (HSQ) is processed at 1100 °C for one hour causing Si to cluster and form a SiO2 matrix, also known as the composite. The composite is then manually crushed in ethanol. The solution is further ground using glass beads, then filtered to get the composite powder. The final step is the HF etching. The hydride-terminated particles are then functionalized using three different methods to synthesize silicon nanoparticle-polystyrene hybrids, which determine the magnitude of luminosity and the quality of the hybrids. We spin coat each method and results were analyzed. Method 1 uses heat to functionalize hydride-terminated silicon nanoparticles with styrene. This process also causes styrene to attach to styrene to form a polystyrene chain. Method 1 gave a homogeneous mixture which yielded a consistent, bright and homogenous film. In method 2, dodecyl-terminated silicon nanoparticles are mixed with premade polystyrene. While this method gave better control of the amount of silicon nanoparticles inside the polymer hybrid, a homogeneous mixture was not created due to the different structures of polystyrene and dodecyl chains. Method 3 has dodecyl-terminated silicon with in-situ styrene polymerization. It generated a homogeneous mixture. The in-situ polymerization stabilizes the particles, allowing for brighter luminescence. Because of the stability and lower molecular weight, the mixture was easier to dissolve. We concluded that the different methods resulted in different polymer molecular weights and this created distinct properties between the polymer hybrids when spin-coating.    

Instabilities in the System NMMO/Water/Cellulose (Lyocell Process) Caused by Polonowski Type Reactions

Holzforschung ◽  
2002 ◽  
Vol 56 (2) ◽  
pp. 199-208 ◽  
Author(s):  
Thomas Rosenau ◽  
Antje Potthast ◽  
Andreas Hofinger ◽  
Herbert Sixta ◽  
Paul Kosma
Keyword(s):  
Molecular Weight ◽  
Acetic Acid ◽  
Exchange Resin ◽  
Degradation Products ◽  
Ion Exchange Resin ◽  
Low Molecular Weight ◽  
Acid Component ◽  
Degradation Reactions ◽  
Polyglucuronic Acid

Summary Polonowski type degradation reactions are a major reason for the frequently observed instability of solutions of cellulose in N-methylmorpholine-N-oxide monohydrate (NMMO, 1). The degradation is induced by degradation products of cellulose and NMMO generated in situ in the Lyocell system. The presence of both an amine component, such as morpholine or N-methylmorpholine, and an acid component is required for the decomposition process to proceed. The latter might be a low-molecular-weight compound, such as formic acid, acetic acid or gluconic acid, or also a high-molecular-weight acid, such as polyglucuronic acid or ion exchange resin.

scholarly journals PA6 and Halloysite Nanotubes Composites with Improved Hydrothermal Ageing Resistance: Role of Filler Physicochemical Properties, Functionalization and Dispersion Technique

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 211 ◽  
Author(s):  
Valentina Sabatini ◽  
Tommaso Taroni ◽  
Riccardo Rampazzo ◽  
Marco Bompieri ◽  
Daniela Maggioni ◽  
...  
Keyword(s):  
Physicochemical Properties ◽  
Polymer Matrix ◽  
In Situ Polymerization ◽  
Cost Effective ◽  
Polyamide 6 ◽  
Halloysite Nanotubes ◽  
Amide Bonds ◽  
Molecular Weights ◽  
Dispersion Technique

Polyamide 6 (PA6) suffers from fast degradation in humid conditions due to hydrolysis of amide bonds, which limits its durability. The addition of nanotubular fillers represents a viable strategy for overcoming this issue, although the additive/polymer interface at high filler content can become privileged site for moisture accumulation. As a cost-effective and versatile material, halloysite nanotubes (HNT) were investigated to prepare PA6 nanocomposites with very low loadings (1–45% w/w). The roles of the physicochemical properties of two differently sourced HNT, of filler functionalization with (3-aminopropyl)triethoxysilane and of dispersion techniques (in situ polymerization vs. melt blending) were investigated. The aspect ratio (5 vs. 15) and surface charge (−31 vs. −59 mV) of the two HNT proved crucial in determining their distribution within the polymer matrix. In situ polymerization of functionalized HNT leads to enclosed and well-penetrated filler within the polymer matrix. PA6 nanocomposites crystal growth and nucleation type were studied according to Avrami theory, as well as the formation of different crystalline structures (α and γ forms). After 1680 h of ageing, functionalized HNT reduced the diffusion of water into polymer, lowering water uptake after 600 h up to 90%, increasing the materials durability also regarding molecular weights and rheological behavior.

Sign in / Sign up

Export Citation Format

Share Document