scholarly journals Model Progress for Tensile Power of Polymer Nanocomposites Reinforced with Carbon Nanotubes by Percolating Interphase Zone and Network Aspects

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1047 ◽  
Author(s):  
Yasser Zare ◽  
Kyong Yop Rhee
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Aspect Ratio ◽  
Polymer Nanocomposites ◽  
Simple Simulation ◽  
Advanced Model

In the present work, a simple simulation is advanced based on a Callister equation considering the impacts of interphase and carbon nanotube (CNT) nets on the strength of nanocomposites after percolation onset. The advanced model can analyze the strength of nanocomposite by filler aspect ratio (α), percolation beginning ( φ p ), interphase depth (t), interphase power (σi), net density (N), and net power (σN). The empirical consequences of several samples agree with the estimations of the industrialised model. The nanocomposite strength straightly depends on “α”, “t”, “σi”, “N”, and “σN”, while the radius and percolation onset of CNT play the inverse characters. The reasonable impacts of net and interphase possessions on the nanocomposite strength rationalise the accurate progress of the Callister equation.

A Carbon Nanotubes Aggregation in Polymer Nanocomposites

2018 ◽  
Vol 935 ◽  
pp. 55-60 ◽  
Author(s):  
Louise B. Atlukhanova ◽  
George V. Kozlov
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Polymer Nanocomposites ◽  
Packing Density ◽  
Elasticity Modulus ◽  
Aggregation Process ◽  
Walk Dimension

Carbon nanotubes aggregation process in aggregates (bundles) has been studied. This process results in essential reduction of nanocomposites attainable elasticity modulus. The bundles packing density is defined by aggregation expectation time and corresponding carbon nanotube walk dimension up to sticking with a similar nanotube.

A closed-form model for estimating the effective thermal conductivities of carbon nanotube–polymer nanocomposites

2018 ◽  
Vol 233 (8) ◽  
pp. 2909-2919 ◽  
Author(s):  
Reza Moheimani ◽  
M Hasansade
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Closed Form ◽  
Polymer Nanocomposites ◽  
Micromechanical Model ◽  
Polymer Nanocomposite ◽  
Interfacial Thermal Resistance ◽  
Full Potential ◽  
Thermal Conductivities

This paper describes a closed-form unit cell micromechanical model for estimating the effective thermal conductivities of unidirectional carbon nanotube reinforced polymer nanocomposites. The model incorporates the typically observed misalignment and curvature of carbon nanotubes into the polymer nanocomposites. Also, the interfacial thermal resistance between the carbon nanotube and the polymer matrix is considered in the nanocomposite simulation. The micromechanics model is seen to produce reasonable agreement with available experimental data for the effective thermal conductivities of polymer nanocomposites reinforced with different carbon nanotube volume fractions. The results indicate that the thermal conductivities are strongly dependent on the waviness wherein, even a slight change in the carbon nanotube curvature can induce a prominent change in the polymer nanocomposite thermal conducting behavior. In general, the carbon nanotube curvature improves the nanocomposite thermal conductivity in the transverse direction. However, using the straight carbon nanotubes leads to maximum levels of axial thermal conductivities. With the increase in carbon nanotube diameter, an enhancement in nanocomposite transverse thermal conductivity is observed. Also, the results of micromechanical simulation show that it is necessary to form a perfectly bonded interface if the full potential of carbon nanotube reinforcement is to be realized.

Interphase influences on the mechanical behavior of carbon nanotube–shape memory polymer nanocomposites: A micromechanical approach

2018 ◽  
Vol 30 (3) ◽  
pp. 463-478 ◽  
Author(s):  
MK Hassanzadeh-Aghdam ◽  
MJ Mahmoodi ◽  
R Ansari ◽  
A Darvizeh
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Shape Memory ◽  
Polymer Nanocomposites ◽  
Elastic Moduli ◽  
Volume Fraction ◽  
Shape Memory Polymer ◽  
Micromechanical Model ◽  
Elastic Behavior ◽  
Interphase Region

The effects of interphase characteristics on the elastic behavior of randomly dispersed carbon nanotube–reinforced shape memory polymer nanocomposites are investigated using a three-dimensional unit cell–based micromechanical method. The interphase region is formed due to non-bonded van der Waals interaction between a carbon nanotube and a shape memory polymer. The influences of temperature, diameter, volume fraction, and arrangement type of carbon nanotubes within the matrix as well as two interphase factors, including adhesion exponent and thickness on the carbon nanotube/shape memory polymer nanocomposite’s longitudinal and transverse elastic moduli, are explored extensively. Moreover, the results are presented for the shape memory polymer nanocomposites containing randomly oriented carbon nanotubes. The obtained results clearly demonstrate that the interphase region plays a crucial role in the modeling of the carbon nanotube/shape memory polymer nanocomposite’s elastic moduli. It is observed that the nanocomposite’s elastic moduli remarkably increase with increasing interphase thickness or decreasing adhesion exponent. It is found that when the interphase is considered in the micromechanical simulation, the shape memory polymer nanocomposite’s elastic moduli non-linearly increase as the carbon nanotube diameter decreases. The predictions of the present micromechanical model are compared with those of other analytical methods and available experiments.

Buckling Analysis of Symmetric Cross-Ply Laminated Annular Plates with Carbon Nanotubes

2014 ◽  
Vol 592-594 ◽  
pp. 901-905
Author(s):  
Pankaj Kumar ◽  
Pandey Ramesh
Keyword(s):  
Carbon Nanotubes ◽  
Boundary Condition ◽  
Carbon Nanotube ◽  
Aspect Ratio ◽  
Energy Method ◽  
Buckling Analysis ◽  
Buckling Load ◽  
Buckling Loads ◽  
Annular Plates ◽  
Buckling Behavior

The Paper presents the buckling response of composite annular plates with under uniform internal and external radial edge loads using energy method. For the equation of stability Trefftez rule is used. The paper consists of buckling behavior of laminate (90/0) s, influence of some parameters such as thickness, boundary condition, aspect ratio on buckling loads and modes are investigated. Present results are compared with other papers. In this paper the effect of % weight of carbon nanotube (MWCNT) on the buckling load is also investigated.

Evaluation of mechanical and dynamic mechanical properties of multiwalled carbon nanotube-based ethylene–propylene copolymer composites mixed by masterbatch dilution

2016 ◽  
Vol 50 (29) ◽  
pp. 4093-4101 ◽  
Author(s):  
Maija Hoikkanen ◽  
Minna Poikelispää ◽  
Amit Das ◽  
Uta Reuter ◽  
Wilma Dierkes ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Aspect Ratio ◽  
Melt Mixing ◽  
Multiwalled Carbon ◽  
Mixing Processes ◽  
Ethylene Propylene ◽  
Dynamic Mechanical ◽  
Mixing Method

A two-step masterbatch mixing technique was studied for preparation of carbon nanotube-filled ethylene–propylene diene elastomer compounds, and compared to conventional one-step mixing process. In the two-step process, a masterbatch compound with carbon nanotube content of 50 parts per hundred was prepared by melt-mixing ethylene–propylene diene elastomer. This material was then compounded with pristine ethylene–propylene diene elastomer and composites with different carbon nanotube concentrations were compared. The aim of this study is to compare the efficiency of two different mixing processes on the dispersion of carbon nanotubes and to facilitate the handling of carbon nanotubes, as the masterbatch can be prepared in a controlled way and used for further dilution without the problems related to carbon nanotube processing. The compound properties were studied with emphasis on mechanical characterization and dynamic mechanical thermal analysis. Masterbatch mixing resulted in the similar mechanical properties of the composites compared to the direct mixing method. At the relatively low loadings of carbon nanotubes, the considerable improvements of the mechanical properties were observed. The aspect ratio of the carbon nanotubes determined by transmission electron microscope was found to be similar to the one calculated from the Guth equation. It showed a considerable reduction in aspect ratio independent of the used mixing method.

Biofilm development on carbon nanotube/polymer nanocomposites

2016 ◽  
Vol 3 (3) ◽  
pp. 545-558 ◽  
Author(s):  
David G. Goodwin ◽  
Z. Xia ◽  
T. B. Gordon ◽  
C. Gao ◽  
E. J. Bouwer ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Polymer Nanocomposites ◽  
Cytotoxic Effect ◽  
Polymer Nanocomposite ◽  
Biofilm Development

Carbon nanotube/polymer nanocomposite surfaces impact biofilm development through the cytotoxic effect of exposed carbon nanotubes on microorganisms.

Sign in / Sign up

Export Citation Format

Share Document