scholarly journals Modification of Polyurethane Sponge Based on the Thiol–Ene Click Reaction and Its Application for Oil/Water Separation

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2072 ◽  
Author(s):  
Liping Liang ◽  
Yanyan Dong ◽  
Yuqing Liu ◽  
Xu Meng
Keyword(s):  
Click Reaction ◽  
Uv Light ◽  
Homogeneous Solution ◽  
Absorption Capacity ◽  
Mercaptoacetic Acid ◽  
Simple Method ◽  
Water Separation ◽  
Polyethylene Glycol Diacrylate ◽  
Oil Water Separation ◽  
Oil Water

A polyurethane (PU) sponge with hydrophobic/oleophilic property was prepared based on the thiol–ene click reaction, which was a simple method with only one step. Photopolymerization was induced through UV light on the sponge surface in a homogeneous solution containing polyethylene glycol diacrylate, pentaerythritol (mercaptoacetic acid) ester, 2-hydroxy-4′-(2-hydroxyethoxy)-2-methylpropiophenone, and octadecyl methacrylate. The as-prepared sponge possessed excellent selective for oil from various types of oil/water mixtures. It also had a high absorption capacity for toluene, >21 times its self-weight, and it had about 20 times its self-weight for vegetable oil, even after five extrusion–adsorption cycles, presenting a good recyclability. It created a new method to prepare oil/water separation sponge.

Using a simple method to prepare UiO‐66‐NH 2 /chitosan composite membranes for oil–water separation

2021 ◽  
pp. 50765
Author(s):  
Ximei Zhu ◽  
Zongxue Yu ◽  
Haojie Zeng ◽  
Xiaofang Feng ◽  
Yuchuan Liu ◽  
...  
Keyword(s):  
Composite Membranes ◽  
Simple Method ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water ◽  
Chitosan Composite

scholarly journals Carbon Nanotubes and Polydopamine Modified Poly(dimethylsiloxane) Sponges for Efficient Oil–Water Separation

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2431
Author(s):  
Wen Zhang ◽  
Juanjuan Wang ◽  
Xue Han ◽  
Lele Li ◽  
Enping Liu ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Large Scale ◽  
Absorption Capacity ◽  
Potential Candidate ◽  
Hard Template ◽  
Water Separation ◽  
Industrial Oil ◽  
The Matrix ◽  
Oil Water Separation ◽  
Oil Water

In this paper, effective separation of oil from both immiscible oil–water mixtures and oil-in-water (O/W) emulsions are achieved by using poly(dimethylsiloxane)-based (PDMS-based) composite sponges. A modified hard template method using citric acid monohydrate as the hard template and dissolving it in ethanol is proposed to prepare PDMS sponge composited with carbon nanotubes (CNTs) both in the matrix and the surface. The introduction of CNTs endows the composite sponge with enhanced comprehensive properties including hydrophobicity, absorption capacity, and mechanical strength than the pure PDMS. We demonstrate the successful application of CNT-PDMS composite in efficient removal of oil from immiscible oil–water mixtures within not only a bath absorption, but also continuous separation for both static and turbulent flow conditions. This notable characteristic of the CNT-PDMS sponge enables it as a potential candidate for large-scale industrial oil–water separation. Furthermore, a polydopamine (PDA) modified CNT-PDMS is developed here, which firstly realizes the separation of O/W emulsion without continuous squeezing of the sponge. The combined superhydrophilic and superoleophilic property of PDA/CNT-PDMS is assumed to be critical in the spontaneously demulsification process.

scholarly journals Complex Aerogels Generated from Nano-Polysaccharides and Its Derivatives for Oil–Water Separation

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1593 ◽  
Author(s):  
Hajo Yagoub ◽  
Liping Zhu ◽  
Mahmoud H. M. A. Shibraen ◽  
Ali A. Altam ◽  
Dafaalla M. D. Babiker ◽  
...  
Keyword(s):  
Guar Gum ◽  
Corn Oil ◽  
Cellulose Nanofibers ◽  
Aqueous Media ◽  
Three Dimensional ◽  
Absorption Capacity ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

The complex aerogel generated from nano-polysaccharides, chitin nanocrystals (ChiNC) and TEMPO-oxidized cellulose nanofibers (TCNF), and its derivative cationic guar gum (CGG) is successfully prepared via a facile freeze-drying method with glutaraldehyde (GA) as cross-linkers. The complexation of ChiNC, TCNF, and CGG is shown to be helpful in creating a porous structure in the three-dimensional aerogel, which creates within the aerogel with large pore volume and excellent compressive properties. The ChiNC/TCNF/CGG aerogel is then modified with methyltrichlorosilane (MTCS) to obtain superhydrophobicity/superoleophilicity and used for oil–water separation. The successful modification is demonstrated through FTIR, XPS, and surface wettability studies. A water contact angle of 155° on the aerogel surface and 150° on the surface of the inside part of aerogel are obtained for the MTCS-modified ChiNC/TCNF/CGG aerogel, resulting in its effective absorption of corn oil and organic solvents (toluene, n-hexane, and trichloromethane) from both beneath and at the surface of water with excellent absorption capacity (i.e., 21.9 g/g for trichloromethane). More importantly, the modified aerogel can be used to continuously separate oil from water with the assistance of a vacuum setup and maintains a high absorption capacity after being used for 10 cycles. The as-prepared superhydrophobic/superoleophilic ChiNC/TCNF/CGG aerogel can be used as a promising absorbent material for the removal of oil from aqueous media.

scholarly journals Fabricated of Superhydrophobic Silanized Melamine Sponge with Photochromic Properties for Efficiency Oil/Water Separation

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Peng Hong ◽  
Zhu Liu ◽  
Yang Gao ◽  
Yubin Chen ◽  
Mingxun Zhuang ◽  
...  
Keyword(s):  
Large Scale ◽  
Separation Efficiency ◽  
Low Cost ◽  
Water Repellency ◽  
Dip Coating ◽  
Absorption Capacity ◽  
Photochromic Properties ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

Superhydrophobic sponge as potential absorbing material for oil/water separation is attracting great attention recently. However, there are still some challenges to feasibly fabricate superhydrophobic sponge with large scale and low cost. Herein, a novel photochromic superhydrophobic melamine sponge (PDMS-SP sponge) is fabricated by facilely dip-coating and thermocuring of hydroxyl-terminated polydimethylsiloxanes mixed with photochromic spiropyran. FT-IR, EDS, and XPS results confirm the successful coating of PDMS-SP upon melamine sponge. The resultant sponge not only possesses excellent water repellency with a contact angle of 154.5° and oil-water separation efficiency with an oil absorption capacity of 48–116 folds of itself weight, but also shows photochromic phenomenon between colorless and purple when it is successively exposed to UV irradiation and visible light.

scholarly journals Controllable synthesis of pomelo peel-based aerogel and its application in adsorption of oil/organic pollutants

2019 ◽  
Vol 6 (2) ◽  
pp. 181823 ◽  
Author(s):  
Guangyu Shi ◽  
Yizhu Qian ◽  
Fengzhi Tan ◽  
Weijie Cai ◽  
Yuan Li ◽  
...  
Keyword(s):  
High Speed ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
High Porosity ◽  
X Ray Diffraction ◽  
Water Separation ◽  
Physico Chemical ◽  
Wide Range ◽  
Oil Water Separation ◽  
Oil Water

Oil/water separation is a field of high significance as it might efficiently resolve the contamination of industrial oily wastewater and other oil/water pollution. In this paper, an environmentally-friendly hydrophobic aerogel with high porosity and low density was successfully synthesized with renewable pomelo peels (PPs) as precursors. Typically, a series of sponge aerogels (HPSA-0, HPSA-1 and HPSA-2) were facilely prepared via high-speed dispersion, freeze-drying and silanization with methyltrimethoxysilane. Indeed, the physical properties of aerogel such as density and pore diameter could be tailored by different additives (filter paper fibre and polyvinyl alcohol). Hence, their physico-chemical properties including internal morphology and chemical structure were characterized in detail by Fourier transform infrared, Brunauer–Emmett–Teller, X-ray diffraction, scanning electron microscope, Thermal gravimetric analyzer (TG) etc. Moreover, the adsorption capacity was further determined and the results revealed that the PP-based aerogels presented excellent adsorption performance for a wide range of oil products and/or organic solvents (crude oil 49.8 g g −1 , soya bean oil 62.3 g g −1 , chloroform 71.3 g g −1 etc.). The corresponding cyclic tests showed the absorption capacity decreased slightly from 94.66% to 93.82% after 10 consecutive cycles, indicating a high recyclability.

Highly compression-tolerant and durably hydrophobic macroporous silicone sponges synthesized by a one-pot click reaction for rapid oil/water separation

2018 ◽  
Vol 6 (37) ◽  
pp. 18025-18030 ◽  
Author(s):  
Jinfeng Cao ◽  
Dengxu Wang ◽  
Peng An ◽  
Jie Zhang ◽  
Shengyu Feng
Keyword(s):  
Thermal Insulation ◽  
Click Reaction ◽  
Low Density ◽  
One Pot ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

Macroporous silicone sponges were first synthesized via a one-pot click reaction, which have controllable porosity, low density, durable hydrophobicity, superoleophilicity, good thermal insulation, and excellent compressibility.

scholarly journals Preparation and Characterization of Tris(trimethylsiloxy)silyl Modified Polyurethane Acrylates and Their Application in Textile Treatment

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1629
Author(s):  
Xuecheng Yu ◽  
Ying Xiong ◽  
Zhen Li ◽  
Hongding Tang
Keyword(s):  
Microphase Separation ◽  
Triethylene Glycol ◽  
Absorption Capacity ◽  
Attenuated Total Reflection ◽  
Water Mixture ◽  
Water Contact ◽  
Water Separation ◽  
Cotton Textiles ◽  
Oil Water Separation ◽  
Oil Water

Three series of silicone modified polyurethane acrylate (SPUA) prepolymers were prepared from dicyclohexylmethane-4, 4′-diisocyanate (HMDI), PPG1000, triethylene glycol (TEG), 2-hydroxyethyl acrylate (HEA), and multi-hydroxyalkyl silicone (MI-III) with tris(trimethylsiloxy)silyl propyl side groups. Their structures were confirmed by 1H NMR, 13C NMR, and Fourier transformed infrared (FTIR) analysis, and SPUA films were obtained by UV curing. The properties of films were investigated by attenuated total reflection (ATR)-FTIR, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), water contact angle (WCA), thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), water and hexane resistance, and tensile testing. The results showed that the structures and dosages of MI-III could influence the polymerization properties, surface properties, water and n-hexane resistance, and thermal and tensile properties of SPUA. For instance, the surface aggregation of tris(trimethylsiloxy)silyl propyl groups (even ~2.5 wt%) could endow SPUA films with less microphase separation, good hydrophobicity, lipophilicity, thermal stability, and mechanical properties. Interestingly, obvious regular winkles appeared on the surfaces of SPUAIII films, which are characterized by relatively high WCA values. However, relatively smooth were observed on the surfaces of SPUAIII films, which also exhibit lower water absorption ratio values. Furthermore, the ordinary cotton textiles would be transformed into hydrophobic and oleophilic textiles after treating with SPUA simply, and they were used in the oil/water separation study. Among them, consistent with water and hexane resistance analysis of SPUA films, SPUAII treated cotton textiles are characterized by relatively small liquid absorption capacity (LAC) values. Thus, phenyl groups and side-chain tris(trimethylsiloxy)silyl propyl groups are helpful to improve the hydrophobicity and lipophilicity of SPUA films. SPUAII-5 (even with 5 wt% MII) treated cotton textiles could efficiently separate the oil/water mixture, such as n-hexane, cyclohexane, or methylbenzene with water. Thus, this material has great potential in the application of hydrophobic treatment, oil/water separation, and industrial sewage emissions, among others.

scholarly journals A Robust Superhydrophobic Polyurethane Sponge Loaded with Multi-Walled Carbon Nanotubes for Efficient and Selective Oil-Water Separation

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3344
Author(s):  
De Liu ◽  
Shiying Wang ◽  
Tao Wu ◽  
Yujiang Li
Keyword(s):  
Ionic Strength ◽  
Absorptive Capacity ◽  
Large Scale ◽  
Low Cost ◽  
Absorption Capacity ◽  
Effect Of Temperature ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

The influence of different coupling agents and coupling times on the wettability of a polyurethane (PU) sponge surface were optimized. Octadecyltrichlorosilane (OTS) was selected as the optimal coupling agent to prepare the superhydrophobic sponge. The superhydrophobic sponge was prepared in one step, which has the advantages of simple operation and enhanced durability. The superhydrophobic sponge was characterized by scanning electron microscopy, Teclis Tracker tensiometry, and Fourier transform infrared (FT-IR) spectrophotometry. The water contact angle increased from 64.1° to 151.3°, exhibiting ideal superhydrophobicity. Oils and organic solvents with different viscosities and densities can be rapidly and selectively absorbed by superhydrophobic sponges, with an absorption capacity of 14.99 to 86.53 times the weight of the sponge itself, without absorbing any water. Since temperature affects the viscosity and ionic strength of oil, and influences the surface wettability of the sponges, the effect of temperature and ionic strength on the oil absorption capacity of the superhydrophobic sponges was measured, and its mechanism was elucidated. The results showed that the absorptive capacity retained more than 90% of the initial absorptive capacity after repeated use for 10 times. Low-cost, durable superhydrophobic sponges show great potential for large-scale oil-water separation.

scholarly journals Superhydrophobic Melamine Sponge Coated with Striped Polydimethylsiloxane by Thiol–Ene Click Reaction for Efficient Oil/Water Separation

ACS Omega ◽  
2018 ◽  
Vol 3 (5) ◽  
pp. 5222-5228 ◽  
Author(s):  
Jinwen Peng ◽  
Junjie Deng ◽  
Yiteng Quan ◽  
Chuanbai Yu ◽  
Hai Wang ◽  
...  
Keyword(s):  
Click Reaction ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water
Sign in / Sign up

Export Citation Format

Share Document