scholarly journals Flow Patterns of Viscoelastic Fracture Fluids in Porous Media: Influence of Pore-Throat Structures

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1291 ◽  
Author(s):  
Xiaoxi Yu ◽  
Yuan Li ◽  
Yuquan Liu ◽  
Yuping Yang ◽  
Yining Wu
Keyword(s):  
Porous Media ◽  
Flow Field ◽  
Flow Patterns ◽  
Deborah Number ◽  
Pore Throat ◽  
Double Peaks ◽  
Fracturing Fluids ◽  
Pore Length ◽  
Viscoelastic Fracture ◽  
Viscoelastic Surfactant

Viscoelastic surfactant (VES) fluid and hydrolyzed polyacryamide (HPAM) solution are two of the most common fracturing fluids used in the hydraulic fracturing development of unconventional reservoirs. The filtration of fracturing fluids in porous media is mainly determined by the flow patterns in pore-throat structures. In this paper, three different microdevices analogue of porous media allow access to a large range of Deborah number (De) and concomitantly low Reynolds number (Re). Continuous pore-throat structures were applied to study the feedback effect of downstream structure on upstream flow of VES fluid and HPAM solution with Deborah (De) number from 1.11 to 146.4. In the infinite straight channel, flow patterns between VES fluids and HPAM solution were similar. However, as pore length shortened to 800 μm, flow field of VES fluid exhibited the triangle shape with double-peaks velocity patterns. The flow field of HPAM solution presented stable and centralized streamlines when Re was larger than 4.29 × 10−2. Additionally, when the pore length was further shortened to 400 μm, double-peaks velocity patterns were vanished for VES fluid and the stable convergent flow characteristic of HPAM solution was observed with all flow rates.

scholarly journals Influence of mineralization and injection flow rate on flow patterns in three-dimensional porous media

2019 ◽  
Vol 21 (27) ◽  
pp. 14605-14611 ◽  
Author(s):  
R. Moosavi ◽  
A. Kumar ◽  
A. De Wit ◽  
M. Schröter
Keyword(s):  
Porous Media ◽  
Flow Field ◽  
Flow Rate ◽  
Three Dimensional ◽  
Flow Patterns ◽  
Low Flow ◽  
Flow Rates ◽  
Injection Flow Rate ◽  
Injection Flow

At low flow rates, the precipitate forming at the miscible interface between two reactive solutions guides the evolution of the flow field.

scholarly journals Flow Pattern Map of Flow Boiling in a Rectangular Channel Filled with Porous Media

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2440
Author(s):  
Youngwoo Kim ◽  
Dae Yeon Kim ◽  
Kyung Chun Kim
Keyword(s):  
Porous Media ◽  
Flow Pattern ◽  
Flow Regime ◽  
Annular Flow ◽  
Flow Boiling ◽  
Rectangular Channel ◽  
Flow Patterns ◽  
Flow Pattern Map ◽  
Mist Flow ◽  
Churn Flow

A flow visualization study was carried out for flow boiling in a rectangular channel filled with and without metallic random porous media. Four main flow patterns are observed as intermittent slug-churn flow, churn-annular flow, annular-mist flow, and mist flow regimes. These flow patterns are clearly classified based on the high-speed images of the channel flow. The results of the flow pattern map according to the mass flow rate were presented using saturation temperatures and the materials of porous media as variables. As the saturation temperatures increased, the annular-mist flow regime occupied a larger area than the lower saturation temperatures condition. Therefore, the churn flow regime is narrower, and the slug flow more quickly turns to annular flow with the increasing vapor quality. The pattern map is not significantly affected by the materials of porous media.

Numerical Simulation of Airborne Salt Particle Behavior in Dry Gauze Method Using Porous Media Model

2021 ◽  
pp. 1-37
Author(s):  
Yuta Tsubokura ◽  
Kyohei Noguchi ◽  
Tomomi Yagi
Keyword(s):  
Porous Media ◽  
Flow Field ◽  
Collection Efficiency ◽  
Steel Structures ◽  
Salt Particle ◽  
Wooden Frame ◽  
Collection Device ◽  
Porous Media Model ◽  
Corrosion Of Steel ◽  
Porous Media Method

Abstract Airborne salt accelerates the corrosion of steel materials and, thus, must be quantitatively evaluated for the management of steel structures. In Japan, the dry gauze method, which uses a gauze embedded in a wooden frame, is often used to evaluate the amount of airborne salt. However, its collection efficiency for salt particles has not been verified owing to the complex airflows around the device. Therefore, as a first step to clarify the collection efficiency, the authors simulated the flow field around the collection device using computational fluid dynamics. In this study, the gauze was modeled as a porous medium to reduce the computational costs. Wind tunnel tests were performed to obtain the pressure loss coefficients of the gauze, which is necessary for the porous media method. Subsequently, particle tracking was performed in the calculated flow field, and the collection efficiency was evaluated under the condition of a filtration efficiency of 100%. The flow fields around the device were accurately reproduced using the porous media model, which considered both the tangential and normal resistances of the gauze. This result suggests that the tangential resistance must be considered in the porous media model when the porosity of an object is small, even if the thickness is small. The dependence of collection efficiency on wind speed and direction was quantitatively evaluated. The results showed that the collection efficiency was greatly affected by the complicated flow field around the device due to the combination of the gauze and wooden frame.

Multiple Flow Patterns and Heat Transfer in Confined Jet Impingement

2002 ◽  
Author(s):  
X. Li ◽  
J. L. Gaddis ◽  
T. Wang
Keyword(s):  
Heat Transfer ◽  
Flow Field ◽  
Boundary Conditions ◽  
Jet Impingement ◽  
Flow Patterns ◽  
Computational Results ◽  
Initial Flow ◽  
Flow Parameters ◽  
Visualization Experiment ◽  
Exit Boundary

The flow field of a 2-D laminar confined impinging slot jet is investigated. Numerical results indicate that there exist two different solutions in some range of geometric and flow parameters. The two steady flow patterns are obtained under identical boundary conditions but only with different initial flow fields. Three different exit boundary conditions are investigated to eliminate artificial effects. The different flow patterns are observed to significantly affect the heat transfer. A flow visualization experiment is carried out to verify the computational results and both flow patterns are observed. The bifurcation mechanism is interpreted and discussed.

Two-phase flow in correlated pore-throat random porous media

2002 ◽  
Vol 11 (4) ◽  
pp. 358-365 ◽  
Author(s):  
Tian Ju-Ping ◽  
Yao Kai-Lun
Keyword(s):  
Porous Media ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Pore Throat ◽  
Two Phase ◽  
Random Porous Media

Performance optimization for the viscoelastic surfactant using nanoparticles for fracturing fluids

2019 ◽  
Vol 207 (10) ◽  
pp. 1474-1482 ◽  
Author(s):  
Musa Mpelwa ◽  
Yahui Zheng ◽  
Shanfa Tang ◽  
Mingzheng Pu ◽  
Lijun Jin
Keyword(s):  
Performance Optimization ◽  
Fracturing Fluids ◽  
Viscoelastic Surfactant

scholarly journals SPH Simulation of Interior and Exterior Flow Field Characteristics of Porous Media

Water ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 918 ◽  
Author(s):  
Shijie Wu ◽  
Matteo Rubinato ◽  
Qinqin Gui
Keyword(s):  
Numerical Simulation ◽  
Porous Media ◽  
Flow Field ◽  
Boundary Conditions ◽  
Water Waves ◽  
Flow Behavior ◽  
Simulation Method ◽  
Interface Problem ◽  
Ocean Engineering ◽  
Flow Field Characteristics

At the present time, one of the most relevant challenges in marine and ocean engineering and practice is the development of a mathematical modeling that can accurately replicate the interaction of water waves with porous coastal structures. Over the last 60 years, multiple techniques and solutions have been identified, from linearized solutions based on wave theories and constant friction coefficients to very sophisticated Eulerian or Lagrangian solvers of the Navier-Stokes (NS) equations. In order to explore the flow field interior and exterior of the porous media under different working conditions, the Smooth Particle Hydrodynamics (SPH) numerical simulation method was used to simulate the flow distribution inside and outside a porous media applied to interact with the wave propagation. The flow behavior is described avoiding Euler’s description of the interface problem between the Euler mesh and the material selected. Considering the velocity boundary conditions and the cyclical circulation boundary conditions at the junction of the porous media and the water flow, the SPH numerical simulation is used to analyze the flow field characteristics, as well as the longitudinal and vertical velocity distribution of the back vortex flow field and the law of eddy current motion. This study provides innovative insights on the mathematical modelling of the interaction between porous structures and flow propagation. Furthermore, there is a good agreement (within 10%) between the numerical results and the experimental ones collected for scenarios with porosity of 0.349 and 0.475, demonstrating that SPH can simulate the flow patterns of the porous media, the flow through the inner and outer areas of the porous media, and the flow field of the back vortex region. Results obtained and the new mathematical approach used can help to effectively simulate with high-precision the changes along the water depth, for a better design of marine and ocean engineering solutions adopted to protect coastal areas.

Simulation of Acoustic Streaming in a Resonator

2004 ◽  
Author(s):  
Bakhtier Farouk ◽  
Murat K. Aktas
Keyword(s):  
Flow Field ◽  
Standing Wave ◽  
Oscillatory Flow ◽  
Stokes Equations ◽  
Acoustic Streaming ◽  
Flow Patterns ◽  
Vortical Flow ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Streaming Flow

Formation of vortical flow structures in a rectangular enclosure due to acoustic streaming is investigated numerically. The oscillatory flow field in the enclosure is created by the vibration of a vertical side wall of the enclosure. The frequency of the wall vibration is chosen such that a standing wave forms in the enclosure. The interaction of this standing wave with the horizontal solid walls leads to the production of Rayleigh type acoustic streaming flow patterns in the enclosure. All four walls of the enclosure considered are thermally insulated. The fully compressible form of the Navier-Stokes equations is considered and an explicit time-marching algorithm is used to explicitly track the acoustic waves. Numerical solutions are obtained by employing a highly accurate flux corrected transport (FCT) algorithm for the convection terms. A time-splitting technique is used to couple the viscous and diffusion terms of the full Navier-Stokes equations. Non-uniform grid structure is employed in the computations. The simulation of the primary oscillatory flow and the secondary (steady) streaming flows in the enclosure is performed. Streaming flow patterns are obtained by time averaging the primary oscillatory flow velocity distributions. The effect of the amount of wall displacement on the formation of the oscillatory flow field and the streaming structures are studied. Computations indicate that the nonlinearity of the acoustic field increases with increasing amount of the vibration amplitude. The form and the strength of the secondary flow associated with the oscillatory flow field and viscous effects are found to be strongly correlated to the maximum displacement of the vibrating wall. Total number of acoustic streaming cells per wavelength is also determined by the strength and the level of the nonlinearity of the sound field in the resonator.

Sign in / Sign up

Export Citation Format

Share Document