scholarly journals Copper and Nickel Coating of Carbon Fiber for Thermally and Electrically Conductive Fiber Reinforced Composites

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 823 ◽  
Author(s):  
Simon Bard ◽  
Florian Schönl ◽  
Martin Demleitner ◽  
Volker Altstädt
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Carbon Fibers ◽  
Fiber Reinforced Composites ◽  
Lightning Strike ◽  
Fiber Direction ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Coated Fiber

In this paper, the thermal and electrical conductivity and mechanical properties of fiber reinforced composites produced from nickel- and copper-coated carbon fibers compared to uncoated fibers are presented. The carbon fibers were processed by our prepreg line and cured to laminates. In the fiber direction, the thermal conductivity doubled from ~3 W/mK for the uncoated fiber, to ~6 W/mK for the nickel, and increased six times to ~20 W/mK for the copper-coated fiber for a fiber volume content of ~50 vol %. Transverse to the fiber, the thermal conductivity increased from 0.6 W/mK (uncoated fiber) to 0.9 W/mK (nickel) and 2.9 W/mK (copper) at the same fiber content. In addition, the electrical conductivity could be enhanced to up to ~1500 S/m with the use of the nickel-coated fiber. We showed that the flexural strength and modulus were in the range of the uncoated fibers, which offers the possibility to use them for lightning strike protection, for heatsinks in electronics or other structural heat transfer elements.

scholarly journals An Energy-Based Model of Longitudinal Splitting in Unidirectional Fiber-Reinforced Composites

1999 ◽  
Vol 67 (3) ◽  
pp. 437-443 ◽  
Author(s):  
K. Oguni ◽  
G. Ravichandran
Keyword(s):  
Volume Fraction ◽  
Effective Properties ◽  
Confining Pressure ◽  
Fiber Reinforced Composites ◽  
Fiber Direction ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Unidirectional Fiber ◽  
Longitudinal Splitting

Unidirectional fiber-reinforced composites are often observed to fail in a longitudinal splitting mode in the fiber direction under far-field compressive loading with weak lateral confinement. An energy-based model is developed based on the principle of minimum potential energy and the evaluation of effective properties to obtain an analytical approximation to the critical stress for longitudinal splitting. The analytic estimate for the compressive strength is used to illustrate its dependence on material properties, surface energy, fiber volume fraction, fiber diameter, and lateral confining pressure. The predictions of the model show good agreement with available experimental data. [S0021-8936(00)02003-1]

scholarly journals Prediction of Orthotropic Hygroscopic Swelling of Fiber-Reinforced Composites from Isotropic Swelling of Matrix Polymer

2019 ◽  
Vol 3 (1) ◽  
pp. 10 ◽  
Author(s):  
Andrey Krauklis ◽  
Abedin Gagani ◽  
Andreas Echtermeyer
Keyword(s):  
Volume Fraction ◽  
Fiber Reinforced Composites ◽  
Fiber Direction ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Element Analysis ◽  
Matrix Polymer ◽  
Hygroscopic Swelling ◽  
The Matrix

Swelling in fiber-reinforced composites is anisotropic. In this work, dealing with glass fiber epoxy composite immersed in distilled water, swelling coefficients are obtained in each direction experimentally. Swelling behaviour in the fiber direction was constrained by the non-swelling fibers and was close to null, while swelling in the transverse directions was found to occur freely—similar to the unconstrained polymer. An analytical method for predicting anisotropic swelling in composites from the swelling of the matrix polymer is reported in this work. The method has an advantage that it is simple to use in practice and requires only a swelling coefficient of the matrix polymer, elastic constants of the matrix and fibers, and a known fiber volume fraction of the composite. The method was validated using finite element analysis. Good agreement was obtained and is reported between experimental hygroscopic swelling data, analytical and numerical results for composite laminates, indicating the validity of this predictive approach.

Dynamic Behavior of Fiber Reinforced Composites Under Multiaxial Compression

1999 ◽  
Author(s):  
Kenji Oguni ◽  
G. Ravichandran
Keyword(s):  
Failure Mode ◽  
Kink Band ◽  
Fiber Reinforced Composites ◽  
Fiber Direction ◽  
Strain Rates ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Band Formation ◽  
Multiaxial Compression ◽  
Axial Splitting

Abstract Results from an experimental investigation on the mechanical behavior of a unidirectional reinforced polymer composite with 50% volume fraction E-glass/vinylester under uniaxial and proportional multiaxial compression are presented. Specimens are loaded in the fiber direction using a servo-hydraulic material testing system for low strain rates and a Kolsky (split Hopkinson) pressure bar for high strain rates, up to 3000 s−1. The results indicate that the compressive strength of the composite increases with increasing levels of confinement and increasing strain rates. Post-test optical and scanning electron microscopy is used to identify the failure modes. The failure mode that is observed in unconfined specimen is axial splitting followed by fiber kink band formation. At high levels of confinement, the failure mode transitions from axial splitting to kink band formation and fiber failure. Also, a new energy based analytic model for studying axial splitting phenomenon in unidirectional fiber-reinforced composites is presented.

scholarly journals Applying ASTM Standards to Tensile Tests of Musculoskeletal Soft Tissue: Methods to Reduce Grip Failures and Promote Reproducibility

2020 ◽  
Vol 143 (1) ◽  
Author(s):  
Madison E. Wale ◽  
Derek Q. Nesbitt ◽  
Bradley S. Henderson ◽  
Clare K. Fitzpatrick ◽  
Jaremy J. Creechley ◽  
...  
Keyword(s):  
Tensile Testing ◽  
Soft Tissues ◽  
Tensile Tests ◽  
Standard Test ◽  
International Standards ◽  
Fiber Reinforced Composites ◽  
Fiber Direction ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Test Standards

Abstract Tensile testing is an essential experiment to assess the mechanical integrity of musculoskeletal soft tissues, yet standard test methods have not been developed to ensure the quality and reproducibility of these experiments. The ASTM International standards organization has created tensile test standards for common industry materials that specify geometric dimensions of test specimens (coupons) that promote valid failures within the gage section (midsubstance), away from the grips. This study examined whether ASTM test standards for plastics, elastomers, and fiber-reinforced composites are suitable for tensile testing of bovine meniscus along the circumferential fiber direction. We found that dumbbell (DB) shaped coupons based on ASTM standards for elastomers and plastics had an 80% and 60% rate of midsubstance failures, respectively. The rate of midsubstance failures dropped to 20% when using straight (ST) coupons based on ASTM standards for fiber-reinforced composites. The mechanical properties of dumbbell shaped coupons were also significantly greater than straight coupons. Finite element models of the test coupons revealed stress distributions that supported our experimental findings. In addition, we found that a commercial deli-slicer was able to slice meniscus to uniform layer thicknesses that were within ASTM dimensional tolerances. This study provides methods, recommendations, and insights that can advance the standardization of tensile testing in meniscus and other soft fibrous tissues.

Natural Fiber Reinforced Synthetic Polymer Composites

2019 ◽  
Vol 23 ◽  
pp. 6-30
Author(s):  
Volkan Uğraşkan ◽  
Abdullah Toraman ◽  
A. Binnaz Hazar Yoruç
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Thermal And Mechanical Properties ◽  
Fiber Reinforced ◽  
Promising Alternative ◽  
Alternative Sources

In early composite materials, the use of petroleum based fibers such as glass and carbon fibers, aramid etc. was common. In order to reduce the dependency on petroleum based sources and environmental pollution, researchers have focused on the search for alternative sources. Natural fibers are abundant, recyclable and biodegradable plant derived materials. Besides, thanks to good physical, thermal and mechanical properties, natural fibers become promising alternative for composites. This review includes information about natural fiber reinforced composites’ components, manufacturing methods, mechanical properties and applications.

scholarly journals Micromechanical evaluation of failure models for unidirectional fiber-reinforced composites

2019 ◽  
Vol 54 (6) ◽  
pp. 791-800
Author(s):  
Azam Arefi ◽  
Frans P van der Meer ◽  
Mohammad Reza Forouzan ◽  
Mohammad Silani ◽  
Mahmoud Salimi
Keyword(s):  
Matrix Material ◽  
Element Model ◽  
Failure Criteria ◽  
Fiber Reinforced Composites ◽  
Fiber Direction ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Wide Range ◽  
The Matrix ◽  
Stress States

In this paper, micromechanical simulations are employed to evaluate the performance of the Tsai–Wu and Hashin failure criteria for fiber-reinforced composites, especially in stress states whose experimental reproduction is complicated. Micromechanical responses are generated using a finite element model of a representative volume element, in which only the matrix material experiences damage and the fibers are assumed to be elastic. Micromechanical simulations of basic load cases are used to calibrate macrolevel criteria. Finally, the response of the micromodel and macromodels is compared for various load combinations. Despite a good agreement between Tsai–Wu criterion predictions and micromodel results in a wide range of stress states, some stress combinations are highlighted for which the strength is not predicted accurately. Additionally, accuracy of the Hashin criterion suffers from ignoring the influence of stress in fiber direction on matrix failure.

scholarly journals Factors affecting direct lightning strike damage to fiber reinforced composites: A review

2020 ◽  
Vol 183 ◽  
pp. 107688 ◽  
Author(s):  
Vipin Kumar ◽  
Tomohiro Yokozeki ◽  
Christian Karch ◽  
Ahmed A. Hassen ◽  
Christopher J. Hershey ◽  
...  
Keyword(s):  
Fiber Reinforced Composites ◽  
Lightning Strike ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Factors Affecting
Sign in / Sign up

Export Citation Format

Share Document