scholarly journals The Influence of DMDBS on Crystallization Behavior and Crystalline Morphology of Weakly-Phase-Separated Olefin Block Copolymer

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 552
Author(s):  
Yongsheng Zhao ◽  
Cheng Yao ◽  
Tao Chang ◽  
Yanling Zhu
Keyword(s):  
Block Copolymer ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Crystal Size ◽  
Composition Dependence ◽  
Crystallization Process ◽  
Crystallization Rate ◽  
Nucleating Agent ◽  
Crystalline Morphology ◽  
Hard Segments

Olefin block copolymer (OBC), with its low hard segments, can form unique space-filling spherulites other than confined-crystallization morphologies, mainly due to its weak phase-separation. In this work, 1,3;2,4-Bis(3,4-dimethylbenzylidene) sorbitol (DMDBS), a well-known nucleating agent, was used to tailor the crystallization behavior and crystalline morphology of OBC. It was found that DMDBS can precipitate within an OBC matrix and self-assemble into crystalline fibrils when cooling from the melt. A non-isothermal crystallization process exhibited an increased crystallization rate and strong composition dependence. During the isothermal crystallization process, DMDBS showed a more obvious nucleating efficiency at a higher crystallization temperature. OBC showed typical spherulites when DMDBS was added. Moreover, a low addition of DMDBS significantly decreased the crystal size, while a large addition of DMDBS induced aggregates, due to the limited miscibility of DMDBS with OBC. The efficient nucleating effect of DMDBS on OBC led to an increased optical transparency for OBC/DMDBS composites.

scholarly journals Significantly Enhanced Crystallization of Poly(ethylene succinate-co-1,2-propylene succinate) by Cellulose Nanocrystals as an Efficient Nucleating Agent

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 224
Author(s):  
Siyu Pan ◽  
Zhiguo Jiang ◽  
Zhaobin Qiu
Keyword(s):  
Crystal Structure ◽  
Cellulose Nanocrystals ◽  
Crystallization Behavior ◽  
Crystallization Process ◽  
Crystallization Rate ◽  
Nucleating Agent ◽  
Melt Crystallization ◽  
Crystalline Morphology ◽  
Poly Ethylene

Poly(ethylene succinate-co-1,2-propylene succinate) (PEPS) is a novel aliphatic biodegradable polyester with good mechanical properties. Due to the presence of methyl as a side group, the crystallization rate of PEPS is remarkably slower than that of the poly(ethylene succinate) homopolymer. To promote the potential application of PEPS, the effect of cellulose nanocrystals (CNC) on the crystallization behavior, crystalline morphology, and crystal structure of PEPS was investigated in this research with the aim of increasing the crystallization rate. CNC enhanced both the melt crystallization behavior of PEPS during the cooling process and the overall crystallization rate during the isothermal crystallization process. The crystallization rate of PEPS became faster with an increase in CNC content. The crystalline morphology study directly confirmed the heterogeneous nucleating agent role of CNC. The crystal structure of PEPS remained unchanged in the composites. On the basis of the interfacial energy, the nucleation mechanism of PEPS in the composites was further discussed by taking into consideration the induction of CNC.

scholarly journals The Synthesis of Biodegradable Poly(L-Lactic Acid)-Polyethylene Glycols Copolymer/Montmorillonite Nanocomposites and Analysis of the Crystallization Properties

Minerals ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 14
Author(s):  
Jiunn-Jer Hwang ◽  
Su-Mei Huang ◽  
Wen-Yang Lin ◽  
Hsin-Jiant Liu ◽  
Cheng-Chan Chuang ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Isothermal Crystallization ◽  
Crystallization Process ◽  
Crystallization Rate ◽  
Nucleating Agent ◽  
Silicate Layer ◽  
Polyethylene Glycols ◽  
Melt Crystallization ◽  
Scanning Calorimetry ◽  
Study Results

This study makes use of polycondensation to produce poly (L-lactic acid)-(polyethylene glycols), a biodegradable copolymer, then puts it with organically modified montmorillonite (o-MMT) going through an intercalation process to produce a series of nanocomposites of PLLA-PEG/o-MMT. The exfoliation and intercalation of the montmorillonite-layered structure could be found through X-ray diffraction and transmission electron microscopy. The lower the molecular weight of poly (ethylene glycol), the more obvious the exfoliation and dispersion. The nanocomposites were investigated under non-isothermal crystallization and isothermal crystallization separately via differential scanning calorimetry (DSC). After the adding of o-MMT to PLLA-PEG copolymers, it was found that the PLLA-PEG nanocomposites crystallized slowly and the crystallization peak tended to become broader during the non-isothermal crystallization process. Furthermore, the thermal curve of the non-isothermal melt crystallization process of PLLA-PEG copolymers with different proportions of o-MMT showed that the melting point decreased gradually with the increase of o-MMT content. In the measurement of isothermal crystallization, increasing the o-MMT of the PLLA-PEG copolymers would increase the t1/2 (crystallization half time) for crystallization and decrease the value of ΔHc. However, the present study results suggest that adding o-MMT could affect the crystallization rate of PLLA-PEG copolymers. The o-MMT silicate layer was uniformly dispersed in the PLLA-PEG copolymers, forming a nucleating agent. The crystallization rate and the regularity of the crystals changed with the increase of the o-MMT content, which further affected the crystallization enthalpies.

The non-isothermal crystallization behavior of polyamide 6 and polyamide 6/HDPE/MAH/L-101 composites

2019 ◽  
Vol 39 (2) ◽  
pp. 124-133 ◽  
Author(s):  
Bingxiao Liu ◽  
Guosheng Hu ◽  
Jingting Zhang ◽  
Zhongqiang Wang
Keyword(s):  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Isothermal Condition ◽  
Crystallization Rate ◽  
Polyamide 6 ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Analysis And Design ◽  
Processing Techniques

AbstractStudy of the crystallization kinetics is particularly necessary for the analysis and design of processing operations, especially the non-isothermal crystallization behavior, which is due to the fact that most practical processing techniques are carried out under non-isothermal conditions. The non-isothermal crystallization behaviors of polyamide 6 (PA6) and PA6/high-density polyethylene/maleic anhydride/2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (PA6/HDPE/MAH/L-101) composites were investigated by differential scanning calorimetry (DSC). The crystallization kinetics under non-isothermal condition was analyzed by the Jeziorny and Mo equations, and the activation energy was determined by the Kissinger and Takhor methods. The crystal structure and morphology were analyzed by wide-angle X-ray diffraction (WXRD) and polarized optical microscopy (POM). The results indicate that PA6/HDPE/MAH/L-101 has higher crystallization temperature and crystallization rate, which is explained as due to its heterogeneous nuclei.

Isothermal Crystallization Behavior of Poly (L-lactic Acid)/ Surface-Grafted Silica Nanocomposites

2012 ◽  
Vol 268-270 ◽  
pp. 37-40 ◽  
Author(s):  
Yan Hua Cai
Keyword(s):  
Lactic Acid ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Nucleating Agent ◽  
Melt Blending ◽  
Scanning Calorimetry ◽  
Silica Nanocomposites ◽  
Induction Periods ◽  
Sio2 Nanocomposites ◽  
Different Content

The Poly(L-lactic acid)(PLLA)/surface-grafting silica(g-SiO2) nanocomposites were prepared by melt blending. The isothermal crystallization behavior of PLLA/g-SiO2 nanocomposites with different content of g-SiO2 was investigated by optical depolarizer. In isothermal crystallization from melt, the induction periods and half times for overall PLLA crystallization (95°C Tc 120°C) were affected by the crystallization temperature and the content of g-SiO2 in nanocomposites. The results showed that g-SiO2 as a kind of heterogeneous nucleating agent can reduce induction periods and half times for overall PLLA crystallization. The thermal properties of PLLA/g-SiO2 samples were also investigated by differential scanning calorimetry (DSC), The results showed that the crystalline degree of PLLA was improved as the presence of g-SiO2.

Crystallization Behavior of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization

2012 ◽  
Vol 184-185 ◽  
pp. 932-935
Author(s):  
Min Li ◽  
Li Guang Xiao ◽  
Hong Kai Zhao
Keyword(s):  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
Crystallization Process ◽  
In Situ Polymerization ◽  
Nucleating Agent ◽  
Lower Content ◽  
Melting Points ◽  
Scanning Calorimetry ◽  
Montmorillonite Nanocomposites

Polyethylene/montmorillonite (PE/MMT) nanocomposites were prepared by in situ polymerization. The crystallization behavior of PE/MMT nanocomposites at different MMT concentrations (from 0.1 to 1.2 wt %) were investigated by differential scanning calorimetry (DSC). The equilibrium melting points increase by the addition of MMT. The crystallization rates of PE/MMT nanocomposites are faster than those of pure PE. The addition of MMT facilitated the crystallization of PE, with the MMT functioning as a heterogeneous nucleating agent at lower content; at higher concentrations, however, the physical hindrance of the MMT layers to the motion of PE chains retarded the crystallization process.

scholarly journals The effect of hydroxyapatite nanoparticles on crystallization and thermomechanical properties of PLLA matrix

2017 ◽  
Vol 89 (1) ◽  
pp. 125-140 ◽  
Author(s):  
Ioanna-Georgia I. Athanasoulia ◽  
Maximos N. Christoforidis ◽  
Dimitrios M. Korres ◽  
Petroula A. Tarantili
Keyword(s):  
Crystallization Temperature ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Crystallization Kinetic ◽  
Crystallization Rate ◽  
Melting Behavior ◽  
Thermomechanical Properties ◽  
Cold Crystallization ◽  
Crystallization Experiments ◽  
Twin Screw

AbstractIn this study, hydroxyapatite (HA) was incorporated in a poly(L-lactic acid) (PLLA) matrix and the thermal properties and crystallization behavior of the derived composites were investigated. The nanocomposites, containing 0–20 wt% HA, were prepared by melt extrusion employing a twin-screw extruder. XRD experiments verified an increase in the intensity of the characteristic diffraction peak of the α-form crystalline phase of PLLA with increasing HA content. By DSC experiments it was observed that the presence of HA increased the crystallinity during cold crystallization, leading to a shift of cold-crystallization temperature to lower values and to an increase in the melting temperature of the PLLA phase. Isothermal crystallization experiments at 100, 110, 115 and 120°C, revealed a maximum in crystallization kinetic around 100°C after the addition of HA compared to 115°C for pure PLLA. The crystallization rate of PLLA matrix in the nanocomposites decreased with increasing crystallization temperature. By using the Avrami and Lauritzen-Hoffman equations the exponent n was calculated in the range 2–3 and a theoretical approach verified that the HA/PLLA systems belong to Regime II of crystallization behavior. The investigated melting behavior of PLLA was attributed to better organized crystalline structure with increasing isothermal crystallization temperatures and might be related with the longer time necessary for the completion of crystallization.

Effect of the Nucleating Agent BN on Crystallization Properties of P(3HB-co-4HB)

2012 ◽  
Vol 627 ◽  
pp. 827-830
Author(s):  
Bing Xin Sun ◽  
Xu Qiao Feng ◽  
Cheng Zhi Chuai ◽  
Ying Guo ◽  
Si Luo
Keyword(s):  
Crystal Structure ◽  
Crystallization Behavior ◽  
Crystallization Rate ◽  
Nucleating Agent ◽  
Structure And Morphology ◽  
Crystallization Properties

The crystallization properties of P(3HB-co-4HB) modified with nucleating agent BN was studied. DSC is used to analyze the melting crystallization behavior and POM is used to characterize crystal structure and morphology. The results show the incorporation of BN decreased the spherulite size, increased the crystallization rate and improved the crystallization properties of P(3HB-co-4HB).

PP/MWCNTs composites: Effects of length of MWCNTs on isothermal crystallization behaviors, crystalline structure, and thermal stability

2017 ◽  
Vol 52 (4) ◽  
pp. 503-517 ◽  
Author(s):  
Zheng-Ian Lin ◽  
Ching-Wen Lou ◽  
Yi-Jun Pan ◽  
Chien-Teng Hsieh ◽  
Chien-Lin Huang ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Crystalline Structure ◽  
Isothermal Crystallization ◽  
Crystallization Rate ◽  
Nucleating Agent ◽  
Scanning Calorimetry ◽  
Crystallization Behaviors ◽  
Walled Carbon Nanotubes ◽  
Thermal Stability Of

This study adopts the melt compounding method to prepare /mutli-walled carbon nanotubes composites. The effects of different lengths of the mutli-walled carbon nanotubes on the isothermal crystallization behaviors, crystalline structure, and thermal stability of the polypropylene/mutli-walled carbon nanotubes composites are examined. The PLM results show that the combination of mutli-walled carbon nanotubes prevents the growth of polypropylene spherulites, and thus results in a small size of spherulites. The differential scanning calorimetry results show that the short (S-) or long (L-) mutli-walled carbon nanotubes can function as the nucleating agent of polypropylene, which accelerates the crystallization rate of polypropylene. Avrami theory analyses indicate that the addition of short-mutli-walled carbon nanotubes particularly provides polypropylene/mutli-walled carbon nanotubes composites with a high crystallization rate. The X-ray diffraction results show that the combination of mutli-walled carbon nanotubes does not pertain to the crystal structure. The TGA test results show that long-mutli-walled carbon nanotubes outperform short -mutli-walled carbon nanotubes in improving the thermal stability of polypropylene, and both can significantly improve it.

Non-Isothermal Crystallization Behavior and Kinetics of Compatibilized β Nucleated Polypropylene/Polystyrene Blends

2014 ◽  
Vol 893 ◽  
pp. 291-294 ◽  
Author(s):  
Hu Bin Lin ◽  
Chong Ming Du ◽  
Jian Yi Zhu ◽  
Wen Yao Liang
Keyword(s):  
Block Copolymer ◽  
Block Copolymers ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Melting Behavior ◽  
Ethylene Propylene ◽  
Crystallization Characteristic ◽  
Different Content ◽  
Kinetics Of

The β nucleated polypropylene (PP), uncompatibilized β nucleated PP/polystyrene (PS) and compatibilized β nucleated PP/PS blends were prepared on a twinscrew extruder.and added into compatibilizers styrene-ethylene-propylene block copolymer (SEP) or two styrene-ethylene-butylen- e-styrene block copolymers (SEBS) with different content of styrene.The crystallization characteristic, melting behavior and crystallization kinetics of these composites were studied.

Variation of non-isothermal crystallization behavior of isotactic polypropylene with varying β-nucleating agent content

2010 ◽  
Vol 59 (10) ◽  
pp. 1441-1450 ◽  
Author(s):  
Linli Xu ◽  
Xiuju Zhang ◽  
Kai Xu ◽  
Shaoquan Lin ◽  
Mingcai Chen
Keyword(s):  
Isotactic Polypropylene ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Nucleating Agent
Sign in / Sign up

Export Citation Format

Share Document