scholarly journals Synthesis of Uniform Alkane-Filled Capsules with a High Under-Cooling Performance and Their Real-Time Optical Properties

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 199
Author(s):  
Jinyun Liu ◽  
Yong Wu ◽  
Wen Zhang ◽  
Jiawei Long ◽  
Ping Zhou ◽  
...  
Keyword(s):  
Molecular Modeling ◽  
Real Time ◽  
In Situ Polymerization ◽  
Optical Observations ◽  
Scanning Calorimetry ◽  
Surrounding Matrix ◽  
Promising Strategy ◽  
Potential Applications ◽  
Solid Form

Encapsulating under-cooling materials has been a promising strategy to address the compatibility issue with a surrounding matrix. Herein, we present the synthesis of a uniform alkane-infilled capsule system that shows obvious under-cooling properties. As demonstrating examples, n-hexadecane was selected as a liquid alkane and n-eicosane as a solid in our systems as core materials via in-situ polymerization, respectively. The under-cooling properties of capsules were investigated using differential scanning calorimetry, real-time optical observations with two polarizers, and molecular modeling. The n-hexadecane encapsulated capsules exhibited a large under-cooling temperature range of 20 °C between melt and crystallization, indicating potential applications for structure-transformation energy storage. In addition, molecular modeling calculations confirmed that the solid forms of n-hexadecane and n-eicosane are more stable than their liquid forms. From liquid to solid form, the n-hexadecane and n-eicosane release energies were 4.63 × 103 and 4.95 × 103 J·g−1, respectively.

A study on the kinetics and thermal properties of polystyrene/diatomite nanocomposites prepared via in situ ATRP

2018 ◽  
Vol 33 (2) ◽  
pp. 180-197 ◽  
Author(s):  
Khezrollah Khezri ◽  
Yousef Fazli
Keyword(s):  
Molecular Weight ◽  
In Situ Polymerization ◽  
Structural Characteristics ◽  
Nitrogen Adsorption ◽  
Linear Increase ◽  
Size Exclusion ◽  
Scanning Calorimetry ◽  
Morphological Studies ◽  
Exclusion Chromatography

Pristine mesoporous diatomite was employed to prepare polystyrene/diatomite composites. Diatomite platelets were used for in situ polymerization of styrene by atom transfer radical polymerization to synthesize tailor-made polystyrene nanocomposites. X-Ray fluorescence spectrometer analysis and thermogravimetric analysis (TGA) were employed for evaluating some inherent properties of pristine diatomite platelets. Nitrogen adsorption/desorption isotherm is applied to examine surface area and structural characteristics of the diatomite platelets. Evaluation of pore size distribution and morphological studies were also performed by scanning and transmission electron microscopy. Conversion and molecular weight determinations were carried out using gas and size exclusion chromatography, respectively. Linear increase of ln ( M0/M) with time for all the samples shows that polymerization proceeds in a living manner. Addition of 3 wt% pristine mesoporous diatomite leads to an increase of conversion from 72% to 89%. Molecular weight of polystyrene chains increases from 11,326 g mol−1 to 14134 g mol−1 with the addition of 3 wt% pristine mesoporous diatomite; however, polydispersity index values increases from 1.13 to 1.38. Increasing thermal stability of the nanocomposites is demonstrated by TGA. Differential scanning calorimetry shows an increase in glass transition temperature from 81.9°C to 87.1°C by adding 3 wt% of mesoporous diatomite platelets.

Crystallization Behavior of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization

2012 ◽  
Vol 184-185 ◽  
pp. 932-935
Author(s):  
Min Li ◽  
Li Guang Xiao ◽  
Hong Kai Zhao
Keyword(s):  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
Crystallization Process ◽  
In Situ Polymerization ◽  
Nucleating Agent ◽  
Lower Content ◽  
Melting Points ◽  
Scanning Calorimetry ◽  
Montmorillonite Nanocomposites

Polyethylene/montmorillonite (PE/MMT) nanocomposites were prepared by in situ polymerization. The crystallization behavior of PE/MMT nanocomposites at different MMT concentrations (from 0.1 to 1.2 wt %) were investigated by differential scanning calorimetry (DSC). The equilibrium melting points increase by the addition of MMT. The crystallization rates of PE/MMT nanocomposites are faster than those of pure PE. The addition of MMT facilitated the crystallization of PE, with the MMT functioning as a heterogeneous nucleating agent at lower content; at higher concentrations, however, the physical hindrance of the MMT layers to the motion of PE chains retarded the crystallization process.

scholarly journals High Performance Attapulgite/Polypyrrole Nanocomposite Reinforced Polystyrene (PS) Foam Based on Supercritical CO2 Foaming

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 985 ◽  
Author(s):  
Yidong Liu ◽  
Lingfeng Jian ◽  
Tianhua Xiao ◽  
Rongtao Liu ◽  
Shun Yi ◽  
...  
Keyword(s):  
Supercritical Co2 ◽  
High Performance ◽  
In Situ Polymerization ◽  
Compression Modulus ◽  
Blowing Agents ◽  
Foaming Process ◽  
Potential Applications ◽  
Polymerization Method ◽  
Low Solubility

CO2 has been regarded as one of the most promising blowing agents for polystyrene (PS) foam due to its non-flammability, low price, nontoxicity, and eco-friendliness. However, the low solubility and fast diffusivity of CO2 in PS hinder its potential applications. In this study, an attapulgite (ATP)/polypyrrole (PPy) nanocomposite was developed using the in situ polymerization method to generate the hierarchical cell texture for the PS foam based on the supercritical CO2 foaming. The results demonstrated that the nanocomposite could act as an efficient CO2 capturer enabling the random release of it during the foaming process. In contrast to the pure PS foam, the ATP/PPy nanocomposite reinforced PS foam is endowed with high cell density (up to 1.9 × 106) and similar thermal conductivity as the neat PS foam, as well as high compression modulus. Therefore, the in situ polymerized ATP/PPy nanocomposite makes supercritical CO2 foaming desired candidate to replace the widely used fluorocarbons and chlorofluorocarbons as PS blowing agents.

scholarly journals Fabrication, Crystalline Behavior, Mechanical Property and In-Vivo Degradation of Poly(l–lactide) (PLLA)–Magnesium Oxide Whiskers (MgO) Nano Composites Prepared by In-Situ Polymerization

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1123 ◽  
Author(s):  
Hui Liang ◽  
Yun Zhao ◽  
Jinjun Yang ◽  
Xiao Li ◽  
Xiaoxian Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Magnesium Oxide ◽  
Bone Repair ◽  
In Situ Polymerization ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry ◽  
Biomedical Material ◽  
In Vivo Degradation

The present work focuses on the preparation of poly(l–lactide)–magnesium oxide whiskers (PLLA–MgO) composites by the in-situ polymerization method for bone repair and implant. PLLA–MgO composites were evaluated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and solid-state 13C and 1H nuclear magnetic resonance spectroscopy (NMR). It was found that the whiskers were uniformly dispersed in the PLLA matrix through the interfacial interaction bonding between PLLA and MgO; thereby, the MgO whisker was found to be well-distributed in the PLLA matrix, and biocomposites with excellent interface bonding were produced. Notably, the MgO whisker has an effect on the crystallization behavior and mechanical properties; moreover, the in vivo degradation of PLLA–MgO composites could also be adjusted by MgO. These results show that the whisker content of 0.5 wt % and 1.0 wt % exhibited a prominent nucleation effect for the PLLA matrix, and specifically 1.0 wt % MgO was found to benefit the enhanced mechanical properties greatly. In addition, the improvement of the degrading process of the composite illustrated that the MgO whisker can effectively regulate the degradation of the PLLA matrix as well as raise its bioactivity. Hence, these results demonstrated the promising application of PLLA–MgO composite to serve as a biomedical material for bone-related repair.

Structure and Properties of Hybrid Polyurethane Composites with Carboxyalumoxanes

2008 ◽  
Vol 587-588 ◽  
pp. 212-216 ◽  
Author(s):  
Magdalena Jurczyk-Kowalska ◽  
Joanna Ryszkowska
Keyword(s):  
In Situ Polymerization ◽  
Structure And Properties ◽  
Mechanical Mixing ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Atomic Force ◽  
The Matrix ◽  
Polyurethane Composites ◽  
Polyurethane Matrix

Carboxyalumoxanes have been incorporated into a polyurethane matrix by in situ polymerization. The filler was dispersed in the polyurethane matrix by either both ultrasonic and mechanical mixing or by mechanical mixing alone. The physico-mechanical properties of the composites have been characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Using ultrasound improves the degree of dispersion of the fillers in the matrix, but it also causes changes in the structure of the polyurethane matrix.

scholarly journals Polystyrene Nanocomposites Reinforced with Novel Dumbbell-Shaped Phenyl-POSSs: Synthesis and Thermal Characterization

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1475 ◽  
Author(s):  
Abate ◽  
Bottino ◽  
Cicala ◽  
Chiacchio ◽  
Ognibene ◽  
...  
Keyword(s):  
In Situ Polymerization ◽  
Thermal Characterization ◽  
Sem Analysis ◽  
Morphological Properties ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Scanning Calorimetry ◽  
Filler Reinforcement ◽  
Aromatic Bridge ◽  
Very High

Two series of novel dumbbell-shaped polyhedral oligomeric silsesquioxanes (POSSs), fully functionalized with phenyl groups at the corner of the silicon cages, were used to prepare polystyrene (PS) nanocomposites through the method of in situ polymerization. The percentage of the molecular filler reinforcement was set as 5% w/w of POSS and was checked by 1H-NMR spectroscopy. The obtained nanocomposites were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Thermal and morphological properties were evaluated and compared among the nanocomposites obtained using the two different series of dumbbell-shaped POSSs and with the net PS. The thermal parameters for the prepared nanocomposites were very high when compared with those of neat PS, and they evidenced significant differences when an aliphatic or aromatic bridge was used to link the silicon cages. SEM analysis results allow us to hypothesize a justification for the different resistance to thermal degradation showed by the two series of molecular reinforcement.

scholarly journals The Use of Epoxy Silanes on Montmorillonite: An Effective Way to Improve Thermal and Rheological Properties of PLA/MMT Nanocomposites Obtained via “In Situ” Polymerization

2015 ◽  
Vol 2015 ◽  
pp. 1-16 ◽  
Author(s):  
Valentina Sabatini ◽  
Hermes Farina ◽  
Luca Basilissi ◽  
Giuseppe Di Silvestro ◽  
Marco A. Ortenzi
Keyword(s):  
Thermal Stability ◽  
Rheological Properties ◽  
In Situ Polymerization ◽  
Rheological Behaviour ◽  
Size Exclusion ◽  
Melt Crystallization ◽  
Scanning Calorimetry ◽  
Molecular Weights ◽  
Exclusion Chromatography

Polylactic acid (PLA) nanocomposites were prepared via “in situ” ring opening polymerization (ROP) of lactide using a montmorillonite, Cloisite 15A, employed after surface treatment with 3-Glycidoxypropyltrimethoxysilane. The dispersion of the nanoparticles was checked using Wide Angle X-Ray Scattering (WAXS) and Transmission Electron Microscopy (TEM); both the effects of different amounts of montmorillonite and silane were measured on molecular weights and on thermal and rheological properties, using Size Exclusion Chromatography (SEC), Differential Scanning Calorimetry (DSC), thermogravimetric analyses (TGA), and rheological analyses. It was found that even very low amounts (0.1% w/w) of nanoparticles greatly affect nanocomposites properties. Unmodified montmorillonite tends to decrease molecular weights, deactivating the catalytic system used for ROP of lactide, but when epoxy silane is present molecular weights increase. Melt crystallization temperatures increase with modified nanoparticles, which enhance crystallization process. TGA analyses show that when pure montmorillonite is present, nanocomposites have lower thermal stability with respect to standard PLA; when silane is used thermal stability can get much higher than standard PLA as silane content increases. The rheological behaviour of nanocomposites shows that melt viscosity is far higher than that of standard PLA at low shear rates and also a marked shear thinning behaviour can be achieved.

Fabrication of Thermochromatic Microencapsulated Phase Change Materials

2011 ◽  
Vol 332-334 ◽  
pp. 1856-1859
Author(s):  
Xiao Hua Liao ◽  
Hai Feng Shi ◽  
Nan Song ◽  
Xing Xiang Zhang
Keyword(s):  
Molecular Structure ◽  
Differential Scanning Calorimetry ◽  
Chemical Structure ◽  
Phase Change Materials ◽  
In Situ Polymerization ◽  
Melamine Formaldehyde ◽  
Scanning Calorimetry ◽  
Microencapsulated Phase Change Materials ◽  
Structure Properties

Microencapsulated n-octadecane (MicroC18) and doped with thermochromatic powders (TC-MicroC18) were prepared with melamine-formaldehyde (M-F) resin as the wall via in-situ polymerization. The chemical structure and thermal behavior of microcapsules were investigated using fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). Experimental results show that 63 wt% n-C18 has been incorporated into microcapsules, and the obvious thermochromatic effect of TC-MicroC18 is displayed with temperature changing. The structure-properties of TC-MicroC18 also is discussed in detail from the aspect of molecular structure.

Preparation and Characterization of a Novel Flame Retarded MCA-PA6 Resin by In Situ Polymerization

2011 ◽  
Vol 399-401 ◽  
pp. 444-448 ◽  
Author(s):  
Jun Qian Mu ◽  
Yi Yang ◽  
Zhi Han Peng
Keyword(s):  
Loss Rate ◽  
In Situ Polymerization ◽  
Mass Loss Rate ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Flame Retarded ◽  
Maximum Mass Loss

In this paper, a novel flame retarded MCA-PA6 (PA6 incorporated with melamine cyanurate) resin was synthesized by in-situ polymerization. The synthetic product was characterized by X-ray diffraction (XRD), scanning electronic microscopy (SEM), Fourier transform infrared spectroscope (FTIR), thermogravimetry analysis (TG), differential scanning calorimetry (DSC) and elemental analysis. The result showed that good dispersability were obtained in MCA-based PA6 prepared successfully. Meanwhile, the maximum mass loss rate appeared at about 450 °C and the residual char increased from 1.2 wt% to 3.2 wt% at 500 °C due to the existence of MCA.This research revealed MCA-PA6 owned a good thermal stability, hence there was potential flame retardance.

Sign in / Sign up

Export Citation Format

Share Document