scholarly journals Polystyrene Nanocomposites Reinforced with Novel Dumbbell-Shaped Phenyl-POSSs: Synthesis and Thermal Characterization

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1475 ◽  
Author(s):  
Abate ◽  
Bottino ◽  
Cicala ◽  
Chiacchio ◽  
Ognibene ◽  
...  
Keyword(s):  
In Situ Polymerization ◽  
Thermal Characterization ◽  
Sem Analysis ◽  
Morphological Properties ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Scanning Calorimetry ◽  
Filler Reinforcement ◽  
Aromatic Bridge ◽  
Very High

Two series of novel dumbbell-shaped polyhedral oligomeric silsesquioxanes (POSSs), fully functionalized with phenyl groups at the corner of the silicon cages, were used to prepare polystyrene (PS) nanocomposites through the method of in situ polymerization. The percentage of the molecular filler reinforcement was set as 5% w/w of POSS and was checked by 1H-NMR spectroscopy. The obtained nanocomposites were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Thermal and morphological properties were evaluated and compared among the nanocomposites obtained using the two different series of dumbbell-shaped POSSs and with the net PS. The thermal parameters for the prepared nanocomposites were very high when compared with those of neat PS, and they evidenced significant differences when an aliphatic or aromatic bridge was used to link the silicon cages. SEM analysis results allow us to hypothesize a justification for the different resistance to thermal degradation showed by the two series of molecular reinforcement.

scholarly journals Design, Preparation and Thermal Characterization of Polystyrene Composites Reinforced with Novel Three-Cages POSS Molecules

Molecules ◽  
2020 ◽  
Vol 25 (13) ◽  
pp. 2967
Author(s):  
Ignazio Blanco ◽  
Francesco Agatino Bottino ◽  
Gianluca Cicala ◽  
Giulia Ognibene ◽  
Claudio Tosto
Keyword(s):  
1H Nmr Spectroscopy ◽  
In Situ Polymerization ◽  
Thermal Characterization ◽  
Scanning Calorimetry ◽  
Single Cage ◽  
The Stability ◽  
First Time ◽  
Thermal Stability Of

Novel polystyrene (PS)/polyhedral oligomeric silsequioxanes (POSSs) nanocomposites were designed and prepared by in situ polymerization, using, for the first time, three-cage POSS molecules. The synthesized compounds were first characterized by Fourier transform infrared spectroscopy (FTIR) and 1H NMR spectroscopy to verify the obtaining of the designed products before their thermal performance was evaluated and compared with those of pristine PS and the corresponding single-cage POSSs nanocomposites. The thermal behaviour was checked by the means of the differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) was also used to confirm the hypothesis about the dispersion/aggregation of the POSS molecules into the polymer matrix. The parameters chosen to evaluate the thermal stability of the investigated compounds, namely temperature at 5% of mass loss (T5%) and solid residue at 700 °C, showed a significant increase in the stability of the polymers reinforced with the three-cages POSS, in comparison to both PS and single-cage POSS reinforced PSs, which therefore turn out to be promising molecular fillers for nanocomposite production.

Injectable in-situ Forming Depot Of Doxycycline Hyclate/α-Cyclodextrin Complex using PLGA for Periodontitis Treatment: Preparation, Charac-terization, and In-Vitro Evaluation

2020 ◽  
Vol 17 ◽  
Author(s):  
Elham Khodaverdi ◽  
Farhad Eisvand ◽  
Mohammad Sina Nezami ◽  
Seyedeh Nesa Rezaeian Shiadeh ◽  
Hossein Kamali ◽  
...  
Keyword(s):  
Complex Form ◽  
Docking Studies ◽  
Morphological Properties ◽  
Burst Release ◽  
Cyclodextrin Complex ◽  
Doxycycline Hyclate ◽  
Scanning Calorimetry ◽  
In Situ Forming

Background:: Doxycycline (DOX) is used in treating a bacterial infection, especially for periodontitis treatment. Objective: To reduce irritation of DOX for subgingival administration and increase the chemical stability and against enzy-matic, the complex of α-cyclodextrin with DOX was prepared and loaded into injectable in situ forming implant based on PLGA. Methods:: FTIR, molecular docking studies, X-ray diffraction, and differential scanning calorimetry was performed to char-acterize the DOX/α-cyclodextrin complex. Finally, the in-vitro drug release and modeling, morphological properties, and cellular cytotoxic effects were also evaluated. Results:: The stability of DOX was improved with complex than pure DOX. The main advantage of the complex is the al-most complete release (96.31 ± 2.56 %) of the drug within 14 days of the implant, whereas in the formulation containing the pure DOX and the physical mixture the DOX with α-cyclodextrin release is reached to 70.18 ± 3.61 % and 77.03 ± 3.56 %, respectively. This trend is due to elevate of DOX stability in the DOX/ α-cyclodextrin complex form within PLGA implant that confirmed by the results of stability. Conclusion:: Our results were indicative that the formulation containing DOX/α-cyclodextrin complex was biocompatible and sustained-release with minimum initial burst release.

scholarly journals The effect of polyhedral oligomeric silsesquioxanes (POSSs) incorporation in ethylene-propylene-diene-terpolymer (EPDM): a thermal study

2021 ◽  
Author(s):  
Ignazio Blanco ◽  
Traian Zaharescu
Keyword(s):  
Room Temperature ◽  
Thermal Characterization ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Dsc Analysis ◽  
Γ Irradiation ◽  
Scanning Calorimetry ◽  
Ethylene Propylene ◽  
Oligomeric Silsesquioxane ◽  
Ethylene Propylene Diene Terpolymer ◽  
Dynamic Heating

AbstractA series of ethylene-propylene-diene-terpolymer (EPDM)/polyhedral oligomeric silsesquioxane (POSS) composites at different percentage of POSS were prepared and subjected to γ-irradiation. Both irradiated and non-irradiated EPDM and composites were investigated by the means of thermal analysis to verify if the presence of POSS molecules is able to reduce the oxidation level of free radicals generated during the degradation and to evaluate the effects of the irradiation. EPDM composites at 1, 3 and 5 mass% of POSS were thus degraded in a thermogravimetric (TG) balance in dynamic heating conditions (25–700 °C), in both inert and oxidative atmosphere by flowing nitrogen and air respectively. Thermal characterization was then completed by carrying out Differential Scanning Calorimetry (DSC) analysis from sub-ambient to better highlight the melting of the polymer and polymer composites occurring just above the room temperature. FTIR spectroscopy was also performed for the prepared samples to check the presence of the molecular filler in the composites and for the TG’s residue at 700 °C, in order to evaluate its nature. DSC and TGA parameters were detected and discussed to have information about the effect of the degradation’s environment, the effect of irradiation on polymer stabilization and the effect of POSS content in the polymer matrix.

scholarly journals Bio-based polyurethane nanocomposite thin coatings from two comparable POSS with eight same vertex groups for controlled release urea

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Lixia Li ◽  
Meng Wang ◽  
Xiandong Wu ◽  
Wenping Yi ◽  
Qiang Xiao
Keyword(s):  
In Situ Polymerization ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Poly Ethylene Glycol ◽  
Thin Coatings ◽  
Polyurethane Coatings ◽  
Coated Urea ◽  
Poly Ethylene ◽  
Coated Fertilizer ◽  
Polyurethane Matrix

AbstractNanocomposite modification has attracted much attention in improving properties of bio-based polymer coating material for coated fertilizer. Herein two comparable polyhedral oligomeric silsesquioxanes (POSS), with eight poly(ethylene glycol) (PEG) and octaphenyl groups attached to the cage, respectively, were successfully incorporated into thin castor oil-based polyurethane coatings via in-situ polymerization on the urea surface. The nanostructure coatings are environmentally friendly, easy to prepare, and property-tunable. The results show that the vertex group of POSS had a pronounced influence on dispersion level and interaction between polyurethane and POSS that well-tuned the release pattern and period of coated urea, even at the coating rate as low as of 2 wt%. The liquid POSS with long and flexible PEG groups had better compatibility and dispersibility in polyurethane matrix than the solid POSS with rigid octaphenyl groups, as evidenced by SEM/EDS. The unique properties were resulted from the different extents of physical crosslinkings. This modification of bio-based polyurethane coating with POSS provided an alternative method of regulating and controlling the properties of coated fertilizer.

A study on the kinetics and thermal properties of polystyrene/diatomite nanocomposites prepared via in situ ATRP

2018 ◽  
Vol 33 (2) ◽  
pp. 180-197 ◽  
Author(s):  
Khezrollah Khezri ◽  
Yousef Fazli
Keyword(s):  
Molecular Weight ◽  
In Situ Polymerization ◽  
Structural Characteristics ◽  
Nitrogen Adsorption ◽  
Linear Increase ◽  
Size Exclusion ◽  
Scanning Calorimetry ◽  
Morphological Studies ◽  
Exclusion Chromatography

Pristine mesoporous diatomite was employed to prepare polystyrene/diatomite composites. Diatomite platelets were used for in situ polymerization of styrene by atom transfer radical polymerization to synthesize tailor-made polystyrene nanocomposites. X-Ray fluorescence spectrometer analysis and thermogravimetric analysis (TGA) were employed for evaluating some inherent properties of pristine diatomite platelets. Nitrogen adsorption/desorption isotherm is applied to examine surface area and structural characteristics of the diatomite platelets. Evaluation of pore size distribution and morphological studies were also performed by scanning and transmission electron microscopy. Conversion and molecular weight determinations were carried out using gas and size exclusion chromatography, respectively. Linear increase of ln ( M0/M) with time for all the samples shows that polymerization proceeds in a living manner. Addition of 3 wt% pristine mesoporous diatomite leads to an increase of conversion from 72% to 89%. Molecular weight of polystyrene chains increases from 11,326 g mol−1 to 14134 g mol−1 with the addition of 3 wt% pristine mesoporous diatomite; however, polydispersity index values increases from 1.13 to 1.38. Increasing thermal stability of the nanocomposites is demonstrated by TGA. Differential scanning calorimetry shows an increase in glass transition temperature from 81.9°C to 87.1°C by adding 3 wt% of mesoporous diatomite platelets.

Crystallization Behavior of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization

2012 ◽  
Vol 184-185 ◽  
pp. 932-935
Author(s):  
Min Li ◽  
Li Guang Xiao ◽  
Hong Kai Zhao
Keyword(s):  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
Crystallization Process ◽  
In Situ Polymerization ◽  
Nucleating Agent ◽  
Lower Content ◽  
Melting Points ◽  
Scanning Calorimetry ◽  
Montmorillonite Nanocomposites

Polyethylene/montmorillonite (PE/MMT) nanocomposites were prepared by in situ polymerization. The crystallization behavior of PE/MMT nanocomposites at different MMT concentrations (from 0.1 to 1.2 wt %) were investigated by differential scanning calorimetry (DSC). The equilibrium melting points increase by the addition of MMT. The crystallization rates of PE/MMT nanocomposites are faster than those of pure PE. The addition of MMT facilitated the crystallization of PE, with the MMT functioning as a heterogeneous nucleating agent at lower content; at higher concentrations, however, the physical hindrance of the MMT layers to the motion of PE chains retarded the crystallization process.

Evaluation of moisture diffusion as a threat to polymer/inorganic nanoparticles composites properties: Polystyrene/calcium sulfate nanocomposite as a case study

2020 ◽  
pp. 096739112095686
Author(s):  
Farzaneh Besharat ◽  
Mehrdad Manteghian ◽  
Mahdi Abdollahi
Keyword(s):  
Calcium Sulfate ◽  
In Situ Polymerization ◽  
Effective Diffusion ◽  
Moisture Diffusion ◽  
Sem Analysis ◽  
Inorganic Nanoparticles ◽  
Tem Analysis ◽  
Water Diffusivity ◽  
Calculation Results

The present study aims to investigate the water diffusivity into polystyrene/ calcium sulfate (PS/CaSO4) nanocomposite samples as a threat to the intended reinforcing properties. For this purpose, CaSO4 nanoparticles were synthesized through a chemical reaction using polyethylene glycol as the stabilizing agent. The polystyrene/calcium sulfate nanocomposites were fabricated through in situ polymerization of styrene monomer and stearic acid coated CaSO4 nanoparticles. SEM analysis was applied to determine the size and shape of the produced nanoparticles. In addition, TEM analysis was applied to study the general morphology and structure of the nanocomposites in order to confirm the PS/CaSO4 nanocomposites formation. FTIR analysis was employed to study the surface functions and bonds formation in both the surface treatment and nanocomposite preparation steps. Water diffusivity into the nanocomposites was evaluated through samples water exposure followed by calculation of the effective diffusion coefficients (Deff) using the diffusion equation given by Fick’s 2nd law. The calculation results have revealed that the obtained Deff values for water diffusivity in PS/CaSO4 (1.5 wt.%) and pure PS samples were 8.73 × 10−20 and 11.1 × 10−20 m2/s, respectively.

scholarly journals Fabrication, Crystalline Behavior, Mechanical Property and In-Vivo Degradation of Poly(l–lactide) (PLLA)–Magnesium Oxide Whiskers (MgO) Nano Composites Prepared by In-Situ Polymerization

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1123 ◽  
Author(s):  
Hui Liang ◽  
Yun Zhao ◽  
Jinjun Yang ◽  
Xiao Li ◽  
Xiaoxian Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Magnesium Oxide ◽  
Bone Repair ◽  
In Situ Polymerization ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry ◽  
Biomedical Material ◽  
In Vivo Degradation

The present work focuses on the preparation of poly(l–lactide)–magnesium oxide whiskers (PLLA–MgO) composites by the in-situ polymerization method for bone repair and implant. PLLA–MgO composites were evaluated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and solid-state 13C and 1H nuclear magnetic resonance spectroscopy (NMR). It was found that the whiskers were uniformly dispersed in the PLLA matrix through the interfacial interaction bonding between PLLA and MgO; thereby, the MgO whisker was found to be well-distributed in the PLLA matrix, and biocomposites with excellent interface bonding were produced. Notably, the MgO whisker has an effect on the crystallization behavior and mechanical properties; moreover, the in vivo degradation of PLLA–MgO composites could also be adjusted by MgO. These results show that the whisker content of 0.5 wt % and 1.0 wt % exhibited a prominent nucleation effect for the PLLA matrix, and specifically 1.0 wt % MgO was found to benefit the enhanced mechanical properties greatly. In addition, the improvement of the degrading process of the composite illustrated that the MgO whisker can effectively regulate the degradation of the PLLA matrix as well as raise its bioactivity. Hence, these results demonstrated the promising application of PLLA–MgO composite to serve as a biomedical material for bone-related repair.

Structure and Properties of Hybrid Polyurethane Composites with Carboxyalumoxanes

2008 ◽  
Vol 587-588 ◽  
pp. 212-216 ◽  
Author(s):  
Magdalena Jurczyk-Kowalska ◽  
Joanna Ryszkowska
Keyword(s):  
In Situ Polymerization ◽  
Structure And Properties ◽  
Mechanical Mixing ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Atomic Force ◽  
The Matrix ◽  
Polyurethane Composites ◽  
Polyurethane Matrix

Carboxyalumoxanes have been incorporated into a polyurethane matrix by in situ polymerization. The filler was dispersed in the polyurethane matrix by either both ultrasonic and mechanical mixing or by mechanical mixing alone. The physico-mechanical properties of the composites have been characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Using ultrasound improves the degree of dispersion of the fillers in the matrix, but it also causes changes in the structure of the polyurethane matrix.

Sign in / Sign up

Export Citation Format

Share Document