scholarly journals Study of Physical and Degradation Properties of 3D-Printed Biodegradable, Photocurable Copolymers, PGSA-co-PEGDA and PGSA-co-PCLDA

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1263 ◽  
Author(s):  
June-Yo Chen ◽  
Joanne Hwang ◽  
Wai-Sam Ao-Ieong ◽  
Yung-Che Lin ◽  
Yi-Kong Hsieh ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Weight Ratio ◽  
Polymeric Materials ◽  
Pure Substance ◽  
Digital Light Processing ◽  
Glycol Diacrylate ◽  
Young’S Moduli ◽  
Potential Applications ◽  
Degradation Properties

As acrylated polymers become more widely used in additive manufacturing, their potential applications toward biomedicine also raise the demand for biodegradable, photocurable polymeric materials. Polycaprolactone diacrylate (PCLDA) and poly(ethylene glycol) diacrylate (PEGDA) are two popular choices of materials for stereolithography (SLA) and digital light processing additive manufacturing (DLP-AM), and have been applied to many biomedical related research. However, both materials are known to degrade at a relatively low rate in vivo, limiting their applications in biomedical engineering. In this work, biodegradable, photocurable copolymers are introduced by copolymerizing PCLDA and/or PEGDA with poly(glycerol sebacate) acrylate (PGSA) to form a network polymer. Two main factors are discussed: the effect of degree of acrylation in PGSA and the weight ratio between the prepolymers toward the mechanical and degradation properties. It is found that by blending prepolymers with various degree of acrylation and at various weight ratios, the viscosity of the prepolymers remains stable, and are even more 3D printable than pure substances. The formation of various copolymers yielded a database with selectable Young’s moduli between 0.67–10.54 MPa, and the overall degradation rate was significantly higher than pure substance. In addition, it is shown that copolymers fabricated by DLP-AM fabrication presents higher mechanical strength than those fabricated via direct UV exposure. With the tunable mechanical and degradation properties, the photocurable, biodegradable copolymers are expected to enable a wider application of additive manufacturing toward tissue engineering.

scholarly journals 3D printing processes for photocurable polymeric materials: technologies, materials, and future trends

2018 ◽  
Vol 16 (3) ◽  
pp. 151-160 ◽  
Author(s):  
Gabriele Taormina ◽  
Corrado Sciancalepore ◽  
Massimo Messori ◽  
Federica Bondioli
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Process Parameters ◽  
Polymeric Materials ◽  
Future Trends ◽  
Digital Light Processing ◽  
General Overview ◽  
Base Matrix ◽  
Main Factors ◽  
Printing Processes

The aim of this review is a faithful report of the panorama of solutions adopted to fabricate a component using vat photopolymerization (VP) processes. A general overview on additive manufacturing and on the different technologies available for polymers is given. A comparison between stereolithography and digital light processing is also presented, with attention to different aspects and to the advantages and limitations of both technologies. Afterward, a quick overview of the process parameters is given, with an emphasis on the necessities and the issues associated with the VP process. The materials are then explored, starting from base matrix materials to composites and nanocomposites, with attention to examples of applications and explanations of the main factors involved.

scholarly journals Printability of External and Internal Structures Based on Digital Light Processing 3D Printing Technique

Pharmaceutics ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 207 ◽  
Author(s):  
Yan Yang ◽  
Yanjun Zhou ◽  
Xiao Lin ◽  
Qingliang Yang ◽  
Gengshen Yang
Keyword(s):  
3D Printing ◽  
Exposure Time ◽  
Drug Loading ◽  
In Vivo Evaluation ◽  
Digital Light Processing ◽  
Layer Height ◽  
Glycol Diacrylate ◽  
Internal Structures ◽  
Printing Technique

The high printing efficiency and easy availability of desktop digital light processing (DLP) printers have made DLP 3D printing a promising technique with increasingly broad application prospects, particularly in personalized medicine. The objective of this study was to fabricate and evaluate medical samples with external and internal structures using the DLP technique. The influence of different additives and printing parameters on the printability and functionality of this technique was thoroughly evaluated. It was observed that the printability and mechanical properties of external structures were affected by the poly(ethylene glycol) diacrylate (PEGDA) concentration, plasticizers, layer height, and exposure time. The optimal printing solutions for 3D external and internal structures were 100% PEGDA and 75% PEGDA with 0.25 mg/mL tartrazine, respectively. And the optimal layer height for 3D external and internal structures were 0.02 mm and 0.05 mm, respectively. The optimal sample with external structures had an adequate drug-loading ability, acceptable sustained-release characteristics, and satisfactory biomechanical properties. In contrast, the printability of internal structures was affected by the photoabsorber, PEGDA concentration, layer height, and exposure time. The optimal samples with internal structures had good morphology, integrity and perfusion behavior. The present study showed that the DLP printing technique was capable of fabricating implants for drug delivery and physiological channels for in vivo evaluation.

Novel organic, polymeric materials for electronics applications

2002 ◽  
Vol 722 ◽  
Author(s):  
Ram W. Sabnis ◽  
Mary J. Spencer ◽  
Douglas J. Guerrero
Keyword(s):  
Optical Density ◽  
Chemical Vapor ◽  
Polymeric Materials ◽  
Substantial Improvement ◽  
Polymeric Systems ◽  
Patterned Wafers ◽  
Visible Spectra ◽  
Potential Applications ◽  
Deep Ultraviolet ◽  
Deposited Films

AbstractNovel organic, polymeric materials and processes of depositing thin films on electronics substrates by chemical vapor deposition (CVD) have been developed and the lithographic behavior of photoresist coated over these CVD films at deep ultraviolet (DUV) wavelength has been evaluated. The specific monomers synthesized for DUV applications include [2.2](1,4)- naphthalenophane, [2.2](9,10)-anthracenophane and their derivatives which showed remarkable film uniformity on flat wafers and conformality over structured topography wafers, upon polymerization by CVD. The chemical, physical and optical properties of the deposited films have been characterized by measuring parameters such as thickness uniformity, solubility, conformality, adhesion to semiconductor substrates, ultraviolet-visible spectra, optical density, optical constants, defectivity, and resist compatibility. Scanning electron microscope (SEM) photos of cross-sectioned patterned wafers showed verticle profiles with no footing, standing waves or undercut. Resist profiles down to 0.10 νm dense lines and 0.09 νm isolated lines were achieved in initial tests. CVD coatings generated 96-100% conformal films, which is a substantial improvement over commercial spin-on polymeric systems. The light absorbing layers have high optical density at 248 nm and are therefore capable materials for DUV lithography applications. CVD is a potentially useful technology to extend lithography for sub-0.15 νm devices. These films have potential applications in microelectronics, optoelectronics and photonics.

scholarly journals In vivo interactome profiling by enzyme‐catalyzed proximity labeling

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yangfan Xu ◽  
Xianqun Fan ◽  
Yang Hu
Keyword(s):  
State Of The Art ◽  
Catalytic Efficiency ◽  
Biological Processes ◽  
Protein Protein Interaction ◽  
Current State ◽  
Protein Interactome ◽  
Potential Applications ◽  
Protein Protein Interaction Networks ◽  
Temporal And Spatial

AbstractEnzyme-catalyzed proximity labeling (PL) combined with mass spectrometry (MS) has emerged as a revolutionary approach to reveal the protein-protein interaction networks, dissect complex biological processes, and characterize the subcellular proteome in a more physiological setting than before. The enzymatic tags are being upgraded to improve temporal and spatial resolution and obtain faster catalytic dynamics and higher catalytic efficiency. In vivo application of PL integrated with other state of the art techniques has recently been adapted in live animals and plants, allowing questions to be addressed that were previously inaccessible. It is timely to summarize the current state of PL-dependent interactome studies and their potential applications. We will focus on in vivo uses of newer versions of PL and highlight critical considerations for successful in vivo PL experiments that will provide novel insights into the protein interactome in the context of human diseases.

scholarly journals Current and Potential Applications of Additive Manufacturing for Power Electronics

2021 ◽  
Vol 2 ◽  
pp. 33-42
Author(s):  
Luis Lopera ◽  
Romina Rodriguez ◽  
Mostafa Yakout ◽  
Mo Elbestawi ◽  
Ali Emadi
Keyword(s):  
Additive Manufacturing ◽  
Power Electronics ◽  
Potential Applications

scholarly journals In Vitro and In Vivo Biosafety Analysis of Resorbable Polyglycolic Acid-Polylactic Acid Block Copolymer Composites for Spinal Fixation

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 29
Author(s):  
Seung Kyun Yoon ◽  
Jin Ho Yang ◽  
Hyun Tae Lim ◽  
Young-Wook Chang ◽  
Muhammad Ayyoob ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Animal Experiments ◽  
Polymeric Materials ◽  
Polyglycolic Acid ◽  
Poly Lactic Acid ◽  
Skin Sensitization ◽  
Spinal Fixation ◽  
In Vivo Degradation

Herein, spinal fixation implants were constructed using degradable polymeric materials such as PGA–PLA block copolymers (poly(glycolic acid-b-lactic acid)). These materials were reinforced by blending with HA-g-PLA (hydroxyapatite-graft-poly lactic acid) and PGA fiber before being tested to confirm its biocompatibility via in vitro (MTT assay) and in vivo animal experiments (i.e., skin sensitization, intradermal intracutaneous reaction, and in vivo degradation tests). Every specimen exhibited suitable biocompatibility and biodegradability for use as resorbable spinal fixation materials.

scholarly journals Concomitant control of mechanical properties and degradation in resorbable elastomer-like materials using stereochemistry and stoichiometry for soft tissue engineering

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Mary Beth Wandel ◽  
Craig A. Bell ◽  
Jiayi Yu ◽  
Maria C. Arno ◽  
Nathan Z. Dreger ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Drug Delivery ◽  
Soft Tissue ◽  
Tissue Regeneration ◽  
Biological Tissues ◽  
Soft Tissue Regeneration ◽  
Soft Tissue Engineering ◽  
Degradation Properties ◽  
Enhance Cell Adhesion

AbstractComplex biological tissues are highly viscoelastic and dynamic. Efforts to repair or replace cartilage, tendon, muscle, and vasculature using materials that facilitate repair and regeneration have been ongoing for decades. However, materials that possess the mechanical, chemical, and resorption characteristics necessary to recapitulate these tissues have been difficult to mimic using synthetic resorbable biomaterials. Herein, we report a series of resorbable elastomer-like materials that are compositionally identical and possess varying ratios of cis:trans double bonds in the backbone. These features afford concomitant control over the mechanical and surface eroding degradation properties of these materials. We show the materials can be functionalized post-polymerization with bioactive species and enhance cell adhesion. Furthermore, an in vivo rat model demonstrates that degradation and resorption are dependent on succinate stoichiometry in the elastomers and the results show limited inflammation highlighting their potential for use in soft tissue regeneration and drug delivery.

A review of additive manufacturing applications in ophthalmology

2021 ◽  
pp. 095441192110280
Author(s):  
Arivazhagan Pugalendhi ◽  
Rajesh Ranganathan
Keyword(s):  
Additive Manufacturing ◽  
Treatment Planning ◽  
Physical Object ◽  
Layer By Layer ◽  
Case Examples ◽  
Manufacturing Method ◽  
3D Cad ◽  
Stl File ◽  
Potential Applications ◽  
Manufacturing Applications

Additive Manufacturing (AM) capabilities in terms of product customization, manufacture of complex shape, minimal time, and low volume production those are very well suited for medical implants and biological models. AM technology permits the fabrication of physical object based on the 3D CAD model through layer by layer manufacturing method. AM use Magnetic Resonance Image (MRI), Computed Tomography (CT), and 3D scanning images and these data are converted into surface tessellation language (STL) file for fabrication. The applications of AM in ophthalmology includes diagnosis and treatment planning, customized prosthesis, implants, surgical practice/simulation, pre-operative surgical planning, fabrication of assistive tools, surgical tools, and instruments. In this article, development of AM technology in ophthalmology and its potential applications is reviewed. The aim of this study is nurturing an awareness of the engineers and ophthalmologists to enhance the ophthalmic devices and instruments. Here some of the 3D printed case examples of functional prototype and concept prototypes are carried out to understand the capabilities of this technology. This research paper explores the possibility of AM technology that can be successfully executed in the ophthalmology field for developing innovative products. This novel technique is used toward improving the quality of treatment and surgical skills by customization and pre-operative treatment planning which are more promising factors.

scholarly journals Rapid fabrication of MOF-based mixed matrix membranes through digital light processing

2021 ◽  
Author(s):  
Alexey Pustovarenko ◽  
Beatriz Seoane ◽  
Edy Abou-Hamad ◽  
Helen E King ◽  
Bert Weckhuysen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Processing Speed ◽  
Mixed Matrix Membranes ◽  
Scientific Interest ◽  
Mixed Matrix ◽  
Digital Light Processing ◽  
Additive Manufacturing Technology ◽  
Rapid Fabrication ◽  
Manufacturing Methods

3D printing, also known as additive manufacturing technology, has greatly expanded across multiple sectors of technology replacing classical manufacturing methods by combining processing speed and high precision. The scientific interest...

scholarly journals Functional Properties and Molecular Degradation of Schizostachyum Brachycladum Bamboo Cellulose Nanofibre in PLA-Chitosan Bionanocomposites

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 2008
Author(s):  
Samsul Rizal ◽  
N. I. Saharudin ◽  
N. G. Olaiya ◽  
H. P. S. Abdul Khalil ◽  
M. K. Mohamad Haafiz ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Moisture Content ◽  
Polymeric Materials ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Thickness Swelling ◽  
Compression Moulding ◽  
Ft Ir ◽  
Degradation Properties

The degradation and mechanical properties of potential polymeric materials used for green manufacturing are significant determinants. In this study, cellulose nanofibre was prepared from Schizostachyum brachycladum bamboo and used as reinforcement in the PLA/chitosan matrix using melt extrusion and compression moulding method. The cellulose nanofibre(CNF) was isolated using supercritical carbon dioxide and high-pressure homogenisation. The isolated CNF was characterised with transmission electron microscopy (TEM), FT-IR, zeta potential and particle size analysis. The mechanical, physical, and degradation properties of the resulting biocomposite were studied with moisture content, density, thickness swelling, tensile, flexural, scanning electron microscopy, thermogravimetry, and biodegradability analysis. The TEM, FT-IR, and particle size results showed successful isolation of cellulose nanofibre using this method. The result showed that the physical, mechanical, and degradation properties of PLA/chitosan/CNF biocomposite were significantly enhanced with cellulose nanofibre. The density, thickness swelling, and moisture content increased with the addition of CNF. Also, tensile strength and modulus; flexural strength and modulus increased; while the elongation reduced. The carbon residue from the thermal degradation and the glass transition temperature of the PLA/chitosan/CNF biocomposite was observed to increase with the addition of CNF. The result showed that the biocomposite has potential for green and sustainable industrial application.

Sign in / Sign up

Export Citation Format

Share Document