scholarly journals Preparation of Microparticles Capable of Glucose-Induced Insulin Release under Physiological Conditions

Polymers ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1164 ◽  
Author(s):  
Kentaro Yoshida ◽  
Kazuma Awaji ◽  
Seira Shimizu ◽  
Miku Iwasaki ◽  
Yuki Oide ◽  
...  
Keyword(s):  
Boronic Acid ◽  
Oxidation Reaction ◽  
Shikimic Acid ◽  
Multilayer Films ◽  
Electrostatic Repulsion ◽  
Layer By Layer ◽  
Sensitive Layer ◽  
Boronate Ester ◽  
Physiological Conditions ◽  
Phenyl Boronic Acid

Hydrogen peroxide (H2O2)-sensitive layer-by-layer films were prepared based on combining phenyl boronic acid (PBA)-modified poly(allylamine) (PAH) with shikimic acid (SA)-modified-PAH through boronate ester bonds. These PBA-PAH/SA-PAH multilayer films could be prepared in aqueous solutions at pH 7.4 and 9.0 in the presence of NaCl. It is believed that the electrostatic repulsion between the SA-PAH and PBA-PAH was diminished and the formation of ester bonds between the SA and PBA was promoted in the presence of NaCl. These films readily decomposed in the presence of H2O2 because the boronate ester bonds were cleaved by an oxidation reaction. In addition, SA-PAH/PBA-PAH multilayer films combined with glucose oxidase (GOx) were decomposed in the presence of glucose because GOx catalyzes the oxidation of D-glucose to generate H2O2. The surfaces of CaCO3 microparticles were coated with PAH/GOx/(SA-PAH/PBA-PAH)5 films that absorbed insulin. A 1 mg quantity of these particles released up to 10 μg insulin in the presence 10 mM glucose under physiological conditions.

scholarly journals Decomposition of Glucose-Sensitive Layer-by-Layer Films Using Hemin, DNA, and Glucose Oxidase

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 319 ◽  
Author(s):  
Kentaro Yoshida ◽  
Yu Kashimura ◽  
Toshio Kamijo ◽  
Tetsuya Ono ◽  
Takenori Dairaku ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Glucose Oxidase ◽  
Dna Cleavage ◽  
Electrostatic Interactions ◽  
Glucose Solution ◽  
Layer By Layer ◽  
Sensitive Layer ◽  
Physiological Conditions ◽  
Lbl Films ◽  
Low Glucose

Glucose-sensitive films were prepared through the layer-by-layer (LbL) deposition of hemin-modified poly(ethyleneimine) (H-PEI) solution and DNA solution (containing glucose oxidase (GOx)). H-PEI/DNA + GOx multilayer films were constructed using electrostatic interactions. The (H-PEI/DNA + GOx)5 film was then partially decomposed by hydrogen peroxide (H2O2). The mechanism for the decomposition of the LbL film was considered to involve more reactive oxygen species (ROS) that were formed by the reaction of hemin and H2O2, which then caused nonspecific DNA cleavage. In addition, GOx present in the LbL films reacts with glucose to generate hydrogen peroxide. Therefore, decomposition of the (H-PEI/DNA + GOx)5 film was observed when the thin film was immersed in a glucose solution. (H-PEI/DNA + GOx)5 films exposed to a glucose solution for periods of 24, 48 72, and 96 h indicated that the decomposition of the film increased with the time to 9.97%, 16.3%, 23.1%, and 30.5%, respectively. The rate of LbL film decomposition increased with the glucose concentration. At pH and ionic strengths close to physiological conditions, it was possible to slowly decompose the LbL film at low glucose concentrations of 1–10 mM.

Decomposition of Glucose-Sensitive Layer-by-Layer Films Using Hemin, DNA, and Glucose Oxidase

2019 ◽  
Author(s):  
Kentaro Yoshida ◽  
Yu Kashimura ◽  
Toshio Kamijo ◽  
Tetsuya Ono ◽  
Takenori Dairaku ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Glucose Oxidase ◽  
Glucose Concentration ◽  
Dna Cleavage ◽  
Electrostatic Interactions ◽  
Glucose Solution ◽  
Layer By Layer ◽  
Sensitive Layer ◽  
Physiological Conditions ◽  
Lbl Films

Glucose-sensitive films were prepared by the layer-by-layer (LbL) deposition of poly(ethyleneimine) (H-PEI) solution and DNA solution (containing glucose oxidase (GOx)). H-PEI/DNA+GOx multilayer films were constructed using electrostatic interactions. The (H-PEI/DNA+GOx)5 film was then partially decomposed by hydrogen peroxide (H2O2). The mechanism for the decomposition of the LbL film was considered to involve a more reactive oxygen species (ROS) that was formed by the reaction of hemin and H2O2, which then caused nonspecific DNA cleavage. GOx present in the LbL films reacts with glucose to generate hydrogen peroxide. Therefore, decomposition of the H-PEI/DNA+GOx)5 film was observed when the thin film was immersed in a glucose solution. A (H-PEI/DNA+GOx)5 film exposed to a glucose solution for periods of 24, 48 72, and 96 h indicated decomposition of the film increased with the time. The rate of LbL film decomposition increased with the glucose concentration. At pH and ionic strength close to physiological conditions, it was possible to slowly decompose the LbL film at a sub-millimolar glucose concentration.

Arylboronic Acids in Self-condensation of Glucosamines Forming Deoxyfructosazine, Catalysts or Reagents?

2019 ◽  
Author(s):  
Meifeng Wang ◽  
Gan Zhu ◽  
Yiqun Li ◽  
Liuqun Gu
Keyword(s):  
Molecular Recognition ◽  
Boric Acid ◽  
Boronic Acid ◽  
Catalytic Mechanism ◽  
Organic Transformations ◽  
Food Industries ◽  
Arylboronic Acids ◽  
Excess Amount ◽  
Phenyl Boronic Acid ◽  
Boron Acid

Arylboronic acids were widely used as efficient catalysts in direct amide formation and other organic transformations. Surprisingly, reports on their use as catalysts in carbohydrates synthesis are very rare even though boron acid-diol complexation was extensively investigated in molecular recognition for saccharides and so on. Here we developed an efficient arylboronic acids catalyzed dimerization of glucosamines forming deoxyfructosazine which is important compound in pharmaceutical and food industries, against a commonly held belief that excess amount of phenyl boronic acid (or boric acid) is a must. A catalytic mechanism was also proposed and arylboronic acids instead of their boronates was identified as catalysts.

On Microfaceting Instability of Pt(110) Under Catalytic Oxidation of Adsorbed Co

1992 ◽  
Vol 263 ◽  
Author(s):  
M. Papoular
Keyword(s):  
Catalytic Oxidation ◽  
Oxidation Reaction ◽  
Nucleation And Growth ◽  
Point Of View ◽  
Momentum Balance ◽  
Layer By Layer ◽  
Adsorption Of Co ◽  
Specific Temperature ◽  
Energy And Momentum ◽  
Sawtooth Profile

ABSTRACTAs demonstrated by recent STM [1] and LEED [2] experiments the platinum (110) surface undergoes, at carbon monoxide submonolayer coverages, a phase transition from the 1 x 2 “missing-row” (reconstructed) state to the 1 x 1(bulk-like) state under specific temperature and partial-pressure conditions. The catalytic oxidation reaction CO + 1/2 → CO2 drives a microfaceting instability [3] [4] of the Pt(110) surface which ends up in a regular sawtooth profile with a period ≈ 200 Å, along the [110] direction.We introduce the idea that the rather extensive Pt mass transport, as involved in the process, could be energetically assisted by the reaction itself. Energy and momentum-balance considerations lead us to expect an energy ≲ 0.5 eV to be transferrable to thesubstrate. This should efficiently contribute to initiating the “scraping”process that leads to the microfaceted pattern.A simple model for nucleation and growth of facets is presented (see ref. 5), yielding characteristic times of order minutes (at T = 500 K), in fair agreement with experiment.Independently of the structural/catalytic problem, adsorption of CO at submonolayer coverages on, e.g., Pt(110) might be of interest from a surfactantphysics point of view (see ref. 6 for a very recent study on layer-by-layer homoepitaxial metal growth).

Biological Multilayer Films Assembled by Redox Polymer and HRP on Screen-Printed Carbon Electrode

2012 ◽  
Vol 571 ◽  
pp. 56-59
Author(s):  
Yu Fang Sha ◽  
Mei Zhao ◽  
Ming Quan Yang ◽  
Hai Xin Bai ◽  
Man Zhao
Keyword(s):  
Horseradish Peroxidase ◽  
Electrostatic Interaction ◽  
Electrode Surface ◽  
Multilayer Films ◽  
Carbon Electrode ◽  
Layer By Layer ◽  
Redox Polymer ◽  
Screen Printed Carbon Electrode ◽  
Positively Charged ◽  
Screen Printed

Biological multilayer films of redox polymer and horseradish peroxidase (HRP) were successfully assembled on a screen-printed carbon electrode using layer-by-layer (LBL) assembled method based on the electrostatic interaction. The screen-printed carbon electrode surface was modified by the positively charged redox polymer, and the negatively charged HRP by LBL method.

Sign in / Sign up

Export Citation Format

Share Document