scholarly journals Embedded, Fully Spray-Coated Pressure Sensor Using a Capacitive Transducing Mechanism

Polymers ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 852 ◽  
Author(s):  
Christina Offenzeller ◽  
Marcel Knoll ◽  
Bernhard Jakoby ◽  
Wolfgang Hilber
Keyword(s):  
Pressure Sensor ◽  
Elevated Temperatures ◽  
Organic Coatings ◽  
Capacitive Sensing ◽  
Heavy Duty ◽  
Time Stability ◽  
Temperature Dependent ◽  
Young’S Moduli ◽  
Long Time ◽  
High Pressure Range

Embedding functional sensor layers directly into mechanical systems in heavy-duty surroundings facilitate the real-time monitoring of the system’s state. This work presents a fully-spray coated pressure sensor that is suitable for applications in the high pressure range. It is embedded into functionalized organic coatings that additionally act as a dielectric for the capacitive sensing mechanism. The sensitivity of the sensor, as well as its long-time stability, has been determined. Additionally, testing has been performed at elevated temperatures to determine the temperature dependent sensitivity that arises from the temperature dependence of the Young’s moduli.

Density and sound velocity measurement by an Anton Paar DSA 5000 density meter: Precision and long-time stability

2021 ◽  
Vol 329 ◽  
pp. 115547
Author(s):  
Zdeněk Wagner ◽  
Magdalena Bendová ◽  
Jan Rotrekl ◽  
Adéla Sýkorová ◽  
Maja Čanji ◽  
...  
Keyword(s):  
Sound Velocity ◽  
Velocity Measurement ◽  
Time Stability ◽  
Long Time ◽  
Long Time Stability

scholarly journals Physical networks from entropy-driven non-covalent interactions

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Anthony C. Yu ◽  
Huada Lian ◽  
Xian Kong ◽  
Hector Lopez Hernandez ◽  
Jian Qin ◽  
...  
Keyword(s):  
Elevated Temperatures ◽  
Dissociation Rate ◽  
Mathematical Framework ◽  
Temperature Dependent ◽  
Nanoparticle Interactions ◽  
Temperature Superposition ◽  
Non Covalent Interactions ◽  
Time Temperature Superposition ◽  
Covalent Interactions ◽  
Physical Crosslinking

AbstractPhysical networks typically employ enthalpy-dominated crosslinking interactions that become more dynamic at elevated temperatures, leading to network softening. Moreover, standard mathematical frameworks such as time-temperature superposition assume network softening and faster dynamics at elevated temperatures. Yet, deriving a mathematical framework connecting the crosslinking thermodynamics to the temperature-dependent viscoelasticity of physical networks suggests the possibility for entropy-driven crosslinking interactions to provide alternative temperature dependencies. This framework illustrates that temperature negligibly affects crosslink density in reported systems, but drastically influences crosslink dynamics. While the dissociation rate of enthalpy-driven crosslinks is accelerated at elevated temperatures, the dissociation rate of entropy-driven crosslinks is negligibly affected or even slowed under these conditions. Here we report an entropy-driven physical network based on polymer-nanoparticle interactions that exhibits mechanical properties that are invariant with temperature. These studies provide a foundation for designing and characterizing entropy-driven physical crosslinking motifs and demonstrate how these physical networks access thermal properties that are not observed in current physical networks.

Conductivity-Temperature Dependent Studies on MG49 Doped Lithium Triflate Salt

2015 ◽  
Vol 1107 ◽  
pp. 181-186
Author(s):  
Zaidatul Salwa Mahmud ◽  
N.H.M. Zaki ◽  
R. Zakaria ◽  
Mohamad Faizul Yahya ◽  
Ab Malik Marwan Ali
Keyword(s):  
Ionic Conductivity ◽  
Elevated Temperatures ◽  
Ethylene Carbonate ◽  
Ionic Mobility ◽  
Ionic Conductors ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
Lithium Triflate ◽  
Mobility Of Charge Carriers ◽  
Solution Cast

This paper reports on the conductivity-temperature studies of gel polymer electrolytes (GPEs) based on 49% poly (methyl methacrylate) grafted-natural rubber (MG49) doped with lithium triflate salt (LiTf) and plasticized with ethylene carbonate (EC). The GPE films are prepared by solution cast technique. The X-ray diffraction (XRD) studies reveal the polymer electrolyte systems are amorphous. AC impedance spectroscopy is carried out in the temperature range between 303 and 373 K. The magnitudes of conductivity observed are strongly dependent on salt concentration and temperature. The high ionic conductivity at elevated temperatures of GPE is attributed to the high ionic mobility of charge carriers. The ionic migration is seen to follow the VTF behavior and approaches to Arrhenius rule at high and low at temperature. Ionic conductivity relaxation appears to be a characteristic of the ionic polarization and the modulus formalism studies confirmed the GPEs in the present investigation are ionic conductors.

scholarly journals Membrane-Based Separation of Phenol/Water Mixtures Using Ionically and Covalently Cross-Linked Ethylene-Methacrylic Acid Copolymers

2008 ◽  
Vol 2008 ◽  
pp. 1-12 ◽  
Author(s):  
Alexander Mixa ◽  
Claudia Staudt
Keyword(s):  
Methacrylic Acid ◽  
Elevated Temperatures ◽  
Type Equation ◽  
Enrichment Factors ◽  
Cross Linking ◽  
Temperature Dependent ◽  
Monomer Content ◽  
Phenol Water ◽  
Feed Temperature ◽  
Acetyl Acetonate

Membrane-based separation of phenol/water mixtures with concentrations of phenol between 3 wt% and 8 wt% in the feed has been performed with nonmodified as well as cross-linked ethylene-methacrylic acid (E-MAA) copolymers with different amounts of methacrylic acid. As cross-linking agents, aluminium acetyl acetonate, which leads to ionically cross-linked membranes, and 2,3,5,6-tetramethyl-1,4-phenylene diamine and glycerine digycidether, leading to covalently cross-linked membranes, have been used. Generally, it was found that with increasing phenol content in the feed, the total flux is increasing whereas the enrichment factor is decreasing. Using nonmodified membranes with higher methacrylic acid monomer content in the polymer, lower fluxes and higher enrichment factors were observed. Investigation of different cross-linked membranes showed that with high phenol concentration in the feed, ionic cross-linking seems to be very promising. Furthermore, variation of feed temperature shows that ionically cross-linked membranes reached higher fluxes as well as higher enrichment factors at elevated temperatures. The temperature-dependent data were fitted based on an Arrhenius-type equation, and activation energies for the permeation of phenol and water through the membrane were calculated.

Creep Tests of Rotating Disks at Elevated Temperature and Comparison With Theory

1954 ◽  
Vol 21 (3) ◽  
pp. 225-235
Author(s):  
A. M. Wahl ◽  
G. O. Sankey ◽  
M. J. Manjoine ◽  
E. Shoemaker
Keyword(s):  
Elevated Temperatures ◽  
Experimental Program ◽  
Test Results ◽  
Rotating Disks ◽  
Creep Tests ◽  
Shear Theory ◽  
Heat Treated ◽  
Long Time ◽  
Average Tension ◽  
Creep Deformations

Abstract A theoretical and experimental program involving methods of calculating creep in rotating disks at elevated temperatures is described. This program consisted primarily of the following: (a) Obtaining forged disks from the same ingot of 12 per cent chrome steel, all disks being forged and heat-treated in the same manner; (b) making spin tests at 1000 F on three of these disks for periods up to about 1000 hr; ( ) making long-time tension-creep tests at 1000 F on many specimens cut out circumferentially from several of the other disks at stresses approximating those of the spin tests; (d) investigating theoretical methods of calculation of creep deformation in such disks; and (e) comparison of spin-test results with those calculated theoretically using average tension-creep data. It was found that available methods of calculating rotating disks based on the Mises criterion gave creep deformations too low compared to the test values, i.e., on the unsafe side for design. Considerably better agreement between test and theoretical results is obtained if the latter is based on the maximum-shear theory. Some discussion is given of the reasons for the better agreement obtained using the latter theory; these are believed to be related in part to the anisotropy of the forged material tested. Further tests on other materials are necessary before general conclusions can be drawn; however, in the absence of test data it is suggested that a conservative course in design for such disks is to apply the maximum-shear theory.

Simplified Analysis Methods for Primary Load Designs at Elevated Temperatures

2011 ◽  
Author(s):  
Peter Carter ◽  
T.-L. Sam Sham ◽  
R. I. Jetter
Keyword(s):  
Elevated Temperatures ◽  
Design Procedure ◽  
Inelastic Strain ◽  
Temperature Dependent ◽  
Perfectly Plastic ◽  
Reference Stress ◽  
Analysis Methods ◽  
Elastic Perfectly Plastic ◽  
Further Development ◽  
Primary Load

The use of “simplified” (reference stress) analysis methods is discussed and illustrated for primary load high temperature design. Elastic methods are the basis of the ASME Section III, Subsection NH primary load design procedure. There are practical drawbacks with this current NH approach, particularly for complex geometries and temperature gradients. The paper describes an approach which addresses these difficulties through the use of temperature-dependent elastic, perfectly-plastic analysis. Traditionally difficulties associated with discontinuity stresses, inelastic strain concentrations and multiaxiality are addressed. A procedure is identified to provide insight into how this approach could be implemented. Though preliminary in nature, it is intended to provide a basis for further development and eventual Code adaptation.

scholarly journals Determining the material model at elevated temperatures with different strain rates and simulating the warm forming process for Mg alloy AZ31B sheet

2015 ◽  
Vol 18 (2) ◽  
pp. 149-158
Author(s):  
Thien Tich Truong ◽  
Long Thanh Nguyen ◽  
Binh Nguyen Thanh Vu ◽  
Hien Thai Nguyen
Keyword(s):  
Magnesium Alloy ◽  
Constitutive Equations ◽  
Elevated Temperatures ◽  
Material Model ◽  
Alloy Sheet ◽  
Strain Rates ◽  
Functional Requirements ◽  
Temperature Dependent ◽  
Forming Process ◽  
Az31b Alloy

Magnesium alloy is one of lightweight alloys has been studied more extensively today. Because weight reduction while maintaining functional requirements is one of the major goals in industries in order to save materials, energy and costs, etc. Its density is about 2/3 of aluminum and 1/4 of steel.The material used in this study is commercial AZ31B magnesium alloy sheet which includes 3% Al and 1% Zn. However, due to HCP (Hexagonal Close Packed) crystal structure, magnesium alloy has limited ductility and poor formability at room temperature. But its ductility and formability will be improved clearly at elevated temperature. From the data of tensile testing, the constitutive equations of AZ31B was approximated using the Ramgberg-Osgood model with temperature dependent parameters to fit in the experiment results in tensile test. Yield locus are also drawn in plane stress σ1- σ2 with different yield criteria such as Hill48, Drucker Prager, Logan Hosford, Y. W. Yoon 2013 and particular Barlat 2000 criteria with temperature dependent parameters. Applying these constitutive equations were determined at various temperatures and different strain rates, the finite element simulation stamping process for AZ31B alloy sheet by software PAM- STAMP 2G 2012, to verify the model materials and the constitutive equations.

Sign in / Sign up

Export Citation Format

Share Document