scholarly journals Three-Dimensional Graphene Composite Containing Graphene-SiO2 Nanoballs and Its Potential Application in Stress Sensors

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 438 ◽  
Author(s):  
Bowei Zhao ◽  
Tai Sun ◽  
Xi Zhou ◽  
Xiangzhi Liu ◽  
Xiaoxia Li ◽  
...  
Keyword(s):  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Measurement Range ◽  
Recoverable Strain ◽  
Assembly Method ◽  
Stress Sensors ◽  
One Step

Combining functional nanomaterials composite with three-dimensional graphene (3DG) is a promising strategy for improving the properties of stress sensors. However, it is difficult to realize stress sensors with both a wide measurement range and a high sensitivity. In this paper, graphene-SiO2 balls (GSB) were composed into 3DG in order to solve this problem. In detail, the GSB were prepared by chemical vapor deposition (CVD) method, and then were dispersed with graphene oxide (GO) solution to synthesize GSB-combined 3DG composite foam (GSBF) through one-step hydrothermal reduction self-assembly method. The prepared GSBF owes excellent mechanical (95% recoverable strain) and electrical conductivity (0.458 S/cm). Furthermore, it exhibits a broad sensing range (0–10 kPa) and ultrahigh sensitivity (0.14 kPa−1). In addition, the water droplet experiment demonstrates that GSBF is a competitive candidate of high-performance materials for stress sensors.

A dimethyl methylphonate sensor based on HFIPPH modified SWCNTs

2022 ◽  
Author(s):  
Haiyang Wu ◽  
Yubin Yuan ◽  
Qiang Wu ◽  
Xiangrui Bu ◽  
Long Hu ◽  
...  
Keyword(s):  
Gas Sensor ◽  
Self Assembly ◽  
High Performance ◽  
Gas Sensing ◽  
Detection System ◽  
High Sensitivity ◽  
Assembly Method ◽  
Sensitivity And Selectivity ◽  
Effect Transistor ◽  
Walled Carbon Nanotubes

Abstract In order to meet the requirements of ultra-fast real-time monitoring of sarin simulator with high sensitivity and selectivity, it is of great significance to develop high performance dimethyl methylphonate (DMMP) sensor. Herein, we proposed a DMMP sensor based on p-hexafluoroisopropanol phenyl (HFIPPH) modified self-assembled single-walled carbon nanotubes (SWCNTs) with field effect transistor (FET) structure. The self-assembly method provides a 4 nanometres thick and micron sized SWCNT channel, with high selectivity to DMMP. The proposed SWCNTs-HFIPPH based sensor exhibits remarkably higher response to DMMP than bare SWCNT based gas sensor within only few seconds. The gas sensing response of SWCNTs-HFIPPH based sensor for 1ppm DMMP is 18.2%, and the response time is about 10 seconds. What's more, the gas sensor we proposed here shows excellent selectivity and reproducibility, and the limitation of detection is as low as ppb level. The proposed method lays the foundation for miniaturization and integration of DMMP sensors, expecting to develop detection system for practical sarin sensing application.

scholarly journals High-Performance On-Chip Silicon Beamsplitter Based on Subwavelength Metamaterials for Enhanced Fabrication Tolerance

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1304
Author(s):  
Raquel Fernández de Cabo ◽  
David González-Andrade ◽  
Pavel Cheben ◽  
Aitor V. Velasco
Keyword(s):  
Integrated Circuits ◽  
Fundamental Mode ◽  
High Performance ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Power Splitting ◽  
Excess Loss ◽  
Power Splitters ◽  
On Chip ◽  
Efficient Power

Efficient power splitting is a fundamental functionality in silicon photonic integrated circuits, but state-of-the-art power-division architectures are hampered by limited operational bandwidth, high sensitivity to fabrication errors or large footprints. In particular, traditional Y-junction power splitters suffer from fundamental mode losses due to limited fabrication resolution near the junction tip. In order to circumvent this limitation, we propose a new type of high-performance Y-junction power splitter that incorporates subwavelength metamaterials. Full three-dimensional simulations show a fundamental mode excess loss below 0.1 dB in an ultra-broad bandwidth of 300 nm (1400–1700 nm) when optimized for a fabrication resolution of 50 nm, and under 0.3 dB in a 350 nm extended bandwidth (1350–1700 nm) for a 100 nm resolution. Moreover, analysis of fabrication tolerances shows robust operation for the fundamental mode to etching errors up to ± 20 nm. A proof-of-concept device provides an initial validation of its operation principle, showing experimental excess losses lower than 0.2 dB in a 195 nm bandwidth for the best-case resolution scenario (i.e., 50 nm).

scholarly journals Pulsed Electromagnetic Cross-Well Exploration for Monitoring Permafrost and Examining the Processes of Its Geocryological Changes

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 60
Author(s):  
Viacheslav Glinskikh ◽  
Oleg Nechaev ◽  
Igor Mikhaylov ◽  
Kirill Danilovskiy ◽  
Vladimir Olenchenko
Keyword(s):  
High Performance ◽  
Geophysical Methods ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Data Interpretation ◽  
Industrial Facilities ◽  
Wide Range ◽  
Vector Finite Element ◽  
A New Technique ◽  
Pulsed Electromagnetic

This paper is dedicated to the topical problem of examining permafrost’s state and the processes of its geocryological changes by means of geophysical methods. To monitor the cryolithozone, we proposed and scientifically substantiated a new technique of pulsed electromagnetic cross-well sounding. Based on the vector finite-element method, we created a mathematical model of the cross-well sounding process with a pulsed source in a three-dimensional spatially heterogeneous medium. A high-performance parallel computing algorithm was developed and verified. Through realistic geoelectric models of permafrost with a talik under a highway, constructed following the results of electrotomography field data interpretation, we numerically simulated the pulsed sounding on the computing resources of the Siberian Supercomputer Center of SB RAS. The simulation results suggest the proposed system of pulsed electromagnetic cross-well monitoring to be characterized by a high sensitivity to the presence and dimensions of the talik. The devised approach can be oriented to addressing a wide range of issues related to monitoring permafrost rocks under civil and industrial facilities, buildings, and constructions.

scholarly journals Direct Patterning and Spontaneous Self-Assembly of Graphene Oxide via Electrohydrodynamic Jet Printing for Energy Storage and Sensing

Micromachines ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 13 ◽  
Author(s):  
Bin Zhang ◽  
Jaehyun Lee ◽  
Mincheol Kim ◽  
Naeeung Lee ◽  
Hyungdong Lee ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Energy Storage ◽  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Layer By Layer ◽  
Energy Storage Devices ◽  
Laminar Structure ◽  
Jet Printing

The macroscopic assembly of two-dimensional materials into a laminar structure has received considerable attention because it improves both the mechanical and chemical properties of the original materials. However, conventional manufacturing methods have certain limitations in that they require a high temperature process, use toxic solvents, and are considerably time consuming. Here, we present a new system for the self-assembly of layer-by-layer (LBL) graphene oxide (GO) via an electrohydrodynamic (EHD) jet printing technique. During printing, the orientation of GO flakes can be controlled by the velocity distribution of liquid jet and electric field-induced alignment spontaneously. Closely-packed GO patterns with an ordered laminar structure can be rapidly realized using an interfacial assembly process on the substrates. The surface roughness and electrical conductivity of the LBL structure were significantly improved compared with conventional dispensing methods. We further applied this technique to fabricate a reduced graphene oxide (r-GO)-based supercapacitor and a three-dimensional (3D) metallic grid hybrid ammonia sensor. We present the EHD-assisted assembly of laminar r-GO structures as a new platform for preparing high-performance energy storage devices and sensors.

Three-dimensional graphene/polyimide composite-derived flexible high-performance organic cathode for rechargeable lithium and sodium batteries

2017 ◽  
Vol 5 (6) ◽  
pp. 2710-2716 ◽  
Author(s):  
Yanshan Huang ◽  
Ke Li ◽  
Jingjing Liu ◽  
Xing Zhong ◽  
Xiangfeng Duan ◽  
...  
Keyword(s):  
High Performance ◽  
Three Dimensional ◽  
3D Graphene ◽  
Sodium Batteries ◽  
One Step

A 3D graphene/polyimide composite is fabricated by a one-step solvothermal strategy as a high-performance cathode for both rechargeable lithium and sodium batteries.

Self-assembled three-dimensional hierarchical graphene hybrid hydrogels with ultrathin β-MnO2 nanobelts for high performance supercapacitors

2015 ◽  
Vol 3 (4) ◽  
pp. 1540-1548 ◽  
Author(s):  
Sheng Zhu ◽  
Hui Zhang ◽  
Ping Chen ◽  
Lin-Hui Nie ◽  
Chuan-Hao Li ◽  
...  
Keyword(s):  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
The Self ◽  
Mass Loading ◽  
Hybrid Hydrogel ◽  
Precise Control ◽  
Ultrafine Structure ◽  
Hybrid Hydrogels ◽  
Self Assembled

A facile protocol for the self-assembly of the rGO/β-MnO2 hybrid hydrogel with ultrafine structure and precise control of mass-loading for high performance supercapacitors is reported.

Synthesis of single-crystalline GeS nanoribbons for high sensitivity visible-light photodetectors

2015 ◽  
Vol 3 (31) ◽  
pp. 8074-8079 ◽  
Author(s):  
Changyong Lan ◽  
Chun Li ◽  
Yi Yin ◽  
Huayang Guo ◽  
Shuai Wang
Keyword(s):  
Visible Light ◽  
Vapor Deposition ◽  
High Performance ◽  
Incident Light ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Single Crystalline ◽  
Promising Application ◽  
Photo Detection ◽  
First Time

Single-crystalline GeS nanoribbons were synthesized by chemical vapor deposition for the first time. The nanoribbon photodetectors respond to the entire visible incident light with a response edge at around 750 nm and a high responsivity, indicating their promising application for high performance broadband visible-light photo-detection.

Nanopillar modified high-sensitivity asymmetric Graphene-GaN photodetector

Nanoscale ◽  
2021 ◽  
Author(s):  
Chang Liu ◽  
Xiaodong Li ◽  
Tiangui Hu ◽  
Wenkai Zhu ◽  
Faguang Yan ◽  
...  
Keyword(s):  
Electrical Properties ◽  
High Performance ◽  
2D Materials ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Optical And Electrical Properties ◽  
Two Dimensional

Integration of two dimensional (2D) materials with three dimensional (3D) semiconductors reveals intriguing optical and electrical properties that surpass those of the original materials. Here we report the high performance...

scholarly journals Bioinspired nano-ordered liquid membrane for precise molecular separation

2020 ◽  
Author(s):  
Haozhen Dou ◽  
Mi Xu ◽  
Baoyu Wang ◽  
Zhen Zhang ◽  
Guobin Wen ◽  
...  
Keyword(s):  
Self Assembly ◽  
High Performance ◽  
Liquid Membrane ◽  
Three Dimensional ◽  
Cellular Membrane ◽  
Liquid Structure ◽  
Long Term Stability ◽  
Separation Membranes ◽  
Molecular Separation

Abstract Cellular membranes provide ideal archetypes for molecule or ion separations with sub-angstrom scale precision, which are featured with both extremely high permeability and selectivity due to the well-defined membrane protein channels. However, the development of bioinspired membranes with artificial channels for sub-angstrom scale ethylene/ethane (0.416 nm / 0.443 nm) separation remains an uncharted territory and a significant challenge. Herein, a bioinspired nano-ordered liquid membrane is constructed by a facile ion/molecule self-assembly strategy for highly efficient ethylene/ethane separation, which mimics the structure of cellular membrane elegantly and possesses plenty of three-dimensional (3D) nanochannels. The elaborate regulation of non-covalent interactions by optimizing the ion/molecule compositions within membrane confers the nano-ordered liquid structure with interpenetrating and bi-continuous apolar domains and polar domains, which results in the formation of regular carrier wires and enormous 3D interconnected ethylene transport nanochannels. By virtue of these 3D nanochannels, the bioinspired nano-ordered liquid membrane manifests simultaneously super-high selectivity, excellent permeance and long-term stability, which exceeds previously reported ethylene/ethane separation membranes. This methodology in this work for construction of bioinspired membrane with tunable 3D nanochannels through ion/molecule self-assembly will enlighten the design and development of high-performance separation membranes for angstrom/sub-angstrom scale ion or molecule separations.

Sign in / Sign up

Export Citation Format

Share Document