scholarly journals Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene Foam by Gas Chromatography-Mass Spectrometry

Molecules ◽  
2021 ◽  
Vol 26 (23) ◽  
pp. 7143
Author(s):  
Tianao Mao ◽  
Haoyang Wang ◽  
Zheng Peng ◽  
Taotao Ni ◽  
Tianqi Jia ◽  
...  

A gas chromatography-mass spectrometry (GC/MS) method for the determination of hexabromocyclododecane (HBCD) in expanded polystyrene and extruded polystyrene foam (EPS/XPS) was developed. The EPS/XPS samples were ultrasonically extracted with acetone and the extracts were purified by filtration through a microporous membrane (0.22 μm) and solid-phase extraction. The samples were analyzed using a GC/MS using the selected ion monitoring mode. The ions 157, 319 and 401 were selected as the qualitative ions, while ion 239 was chosen as the quantitative ion. An HBCD standard working solution with a concentration range of 1.0–50.0 mg/L showed good linearity. The detection limit of HBCD was 0.5 mg/kg, meeting the LPC limit (<100 or 1000 mg/kg). Six laboratories were selected to verify the accuracy of the method, and 10 samples were tested. The interlaboratory relative standard deviation range was 3.68–9.80%. This method could play an important role in controlling HBCD contamination in EPS/XPS.

2000 ◽  
Vol 83 (5) ◽  
pp. 1082-1086 ◽  
Author(s):  
Maurizio Guidotti

Abstract A method was developed for the selective determination of Se4+ in drinkable water by solid-phase microextraction (SPME) and gas chromatography/mass spectrometry (GC/MS). Se4+ was selectively derivatized to ethane, 1,1′-selenobis by reaction with sodium tetraethylborate, extracted by the SPME fiber, and determined by GC/MS. Both headspace (HS)–SPME and direct SPME were studied. The method requires only a few milliliters of sample and 20 min for completion. At 2.0 μg/L concentration, the relative standard deviation was 10.1% for HS–SPME and 9.1% for direct SPME. For HS–SPME, the theoretical detection limit was 81 ng/L and 166 ng/L for direct SPME. The recovery rate was 95%. The method was used to determine Se4+ in 10 tap water samples.


Sign in / Sign up

Export Citation Format

Share Document